Mathematical modelling for extraction of oil from Dracocephalum kotschyi seeds in supercritical carbon dioxide

Determination of Regorafenib monohydrate (colorectal anticancer drug) solubility in supercritical CO2: Experimental and thermodynamic modeling

In this study, the solubilities of Regorafenib monohydrate (REG), a widely used as a colorectal anticancer drug, in supercritical carbon dioxide (ScCO2) were measured under various pressures and temperature conditions, for the first time. The minimum value of REG in mole fraction was determined to be 3.06×10-7, while the maximum value was found to be 6.44×10-6 at 338 K and 27 MPa. The experimental data for REG were correlated through the utilization of two types of models: (1) a set of 25 existing empirical and semi-empirical models that incorporated 3-8 parameters according to functional dependencies, (2) a model that relied on solid-liquid equilibrium (SLE) and the newly improved association models. All of the evaluated models were capable of generating suitable fits to the solubility data of REG, however, the average absolute relative deviation (AARD) of Gordillo et al. model (AARD=13.2%) and Reddy et al. model (AARD=13.5%) indicated their superiority based on AARD%. Furthermore, solvation and sublimation enthalpies of REG drug were estimated for the first time.

Extraction Process Optimization of Curcumin from Curcuma xanthorrhiza Roxb. with Supercritical Carbon Dioxide Using Ethanol as a Cosolvent

Curcuma xanthorrhiza Roxb., known as temulawak, Javanese ginger, or Javanese turmeric, is a plant species belonging to the ginger family. This plant originated in Indonesia, more specifically on Java Island, and is usually used as medicine. It contains a high amount of a phenolic compound, namely, curcumin. A supercritical carbon dioxide extraction technique was employed to extract curcumin from C. xanthorrhiza. The objective of this work was to investigate the effects of temperature, pressure, and CO2 flow rate on the extraction yield and curcumin recovery from C. xanthorrhiza, which was extracted using supercritical carbon dioxide and ethanol as a cosolvent. The Box-Behnken design (BBD) experimental design and response surface methodology were used to optimize the extraction yield and curcumin recovery. The extraction conditions at a temperature of 40 °C, a pressure of 25 MPa, and a CO2 flow rate of 5.34 mL/min produced the optimum extraction yield of 10.4% and curcumin recovery of 3.2%. From Fourier transform infrared analysis, although the physical-chemical structure in the residue of the starting material was almost similar, the quantity of all functional groups in the residue decreased from the starting material. From scanning electron microscopy analysis, it was confirmed that the cell was broken due to the high-pressure effect, so that the extraction process runs easily.

Extraction and Emulsification of Carotenoids from Carrot Pomaces Using Oleic Acid

This study aimed to use oleic acid-based ultrasonic-assisted extraction (UAE) to recover carotenoids from carrot pomace and emulsify the enriched-carotenoid oleic acid using spontaneous and ultrasonic-assisted emulsification. The extraction performance of oleic acid was compared with traditional organic solvents, including hexane, acetone, and ethyl acetate. The one-factor experiments were employed to examine the impact of UAE conditions, including liquid-to-solid ratios, temperature, ultrasonic power, and time, on the extraction yield of carotenoids and to find the conditional ranges for the optimization process. The response surface methodology was employed to optimize the UAE process. The second-order extraction kinetic model was used to find the mechanism of oleic acid-based UAE. After that, the enriched-carotenoid oleic acid obtained at the optimal conditions of UAE was used to fabricate nanoemulsions using spontaneous emulsification (SE), ultrasonic-assisted emulsification (UE), and SE-UE. The effect of SE and UE conditions on the turbidity of nanoemulsion was determined. Then, the physiochemical attributes of the nanoemulsion from SE, UE, and spontaneous ultrasonic-assisted emulsification (SE-UE) were determined using the dynamic light scattering method. The extraction yield of carotenoids from carrot pomace by using sonication was the highest. The adjusted optimal conditions were 39 mL/g of LSR, 50 °C, 12.5 min, and 350 W of ultrasonic power. Under optimal conditions, the carotenoid content attained was approximately 163.43 ± 1.83 μg/g, with the anticipated value (166 μg/g). The particle sizes of nanoemulsion fabricated at the proper conditions of SE, UE, and SE-UE were 31.2 ± 0.83, 33.8 ± 0.52, and 109.7 ± 8.24 nm, respectively. The results showed that SE and UE are suitable methods for fabricating nanoemulsions. The research provided a green approach for extracting and emulsifying carotenoids from carrot pomace.

Approach of Supercritical Carbon Dioxide for the Extraction of Kleeb Bua Daeng Formula

Supercritical fluid extraction (SFE) is an innovative green technology for the extraction of phytochemicals from plants. Therefore, this study aimed to evaluate the application of SFE and to optimize the extraction conditions of the Thai herbal formula, Kleeb Bua Daeng (KBD). A Box-Behnken design (BBD) with response surface methodology (RMS) was used to determine the effect of the extraction time (30-90 min), temperature (30-60 °C), and pressure (200-300 bar) on response variables including the extraction yield, total phenolic content (TPC), total flavonoid content (TFC), total carotenoid content (TCC), and total anthocyanin content (TAC) of the KBD formula. The highest percentage extraction yield (3.81%) was achieved at 60 °C, 300 bar, and 60 min of the extraction time. The highest TPC (464.56 mg gallic acid equivalents/g extract), TFC (217.19 mg quercetin equivalents/g extract), and TCC (22.26 mg β-carotene equivalents/g extract) were all achieved at 60 °C, 250 bar, and 90 min of the extraction time. On the contrary, it was not possible to quantify the total anthocyanin content as anthocyanins were not extracted by this method. The results indicated that SFE-CO2 is a suitable method of extraction for a green recovery of phytochemicals with low and moderate polarity from the KBD formula.

Influence of particle size in supercritical carbon dioxide extraction of roselle (Hibiscus sabdariffa) on bioactive compound recovery, extraction rate, diffusivity, and solubility

The purpose of this work was to establish the best particle size for recovering high yields of total phenolic compounds (TPC), total anthocyanin compounds(TAC) and total flavonoid compounds (TFC) from roselle (Hibiscus sabdariffa) by applying supercritical carbon dioxide (ScCO₂). The extraction rate, diffusivity and solubility of yield in ScCO₂ were also studied and calculated utilizing models. Pressure (10 and 30 MPa), temperature (40 and 60 °C), and particle size (250 µm < dp < 355 µm, 355 µm < dp < 425 µm and 425 µm < dp < 500 µm) were employed as variables in this experiment. The greatest recovery was 11.96% yield, 7.16 mg/100 g TAC, 42.93 mg/100 g TPC and 239.36 mg/100 g TFC under the conditions of 30 MPA, 40 °C and 250 µm < dp < 355 µm, respectively. The extraction rate of supercritical carbon dioxide in roselle extraction ranged from 5.19 E-03 to 1.35 E-03 mg/s fitted using the Esquivel model. The diffusivity coefficient of ScCO₂ ranged from 2.17E-12 to 3.72E-11 mg/s², as fitted by a single sphere model. The greatest solubility of global yield, TAC, TPC and TFC in ScCO₂ was 1.50 g/L, 0.3 mg/L, 1.69 mg/L and 9.97 mg/L, respectively, with a particle size of 250 µm < dp < 355 µm. The smaller particle size of roselle provides the maximum bioactive compound recovery and solubility. Furthermore, the diffusivity and extraction of ScCO₂ are increased by decreasing the particle size. Therefore, a smaller particle size is appropriate for roselle extraction by ScCO₂ based on the experimental and modelling data.

Orange Pomace and Peel Extraction Processes towards Sustainable Utilization: A Short Review

More than 58 million metric tonnes of oranges were produced in 2021, and the peels, which account for around one-fifth of the fruit weight, are often discarded as waste in the orange juice industry. Orange pomace and peels as wastes are used as a sustainable raw material to make valuable products for nutraceuticals. The orange peels and pomace contain pectin, phenolics, and limonene, which have been linked to various health benefits. Various green extraction methods, including supercritical carbon dioxide (ScCO₂) extraction, subcritical water extraction (SWE), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), are applied to valorize the orange peels and pomace. Therefore, this short review will give insight into the valorization of orange peels/pomace extraction using different extraction methods for health and wellness. This review extracts information from articles written in English and published from 2004 to 2022. The review also discusses orange production, bioactive compounds in orange peels/pomaces, green extractions, and potential uses in the food industry. Based on this review, the valorization of orange peels and pomaces can be carried out using green extraction methods with high quantities and qualities of extracts. Therefore, the extract can be used for health and wellness products.

Characterization of phyto-components with antimicrobial traits in supercritical carbon dioxide and soxhlet Prosopis juliflora leaves extract using GC-MS

This study aimed to screen the bioactive compounds from Prosopis juliflora leaf supercritical fluid extract and to assess its antimicrobial properties. Supercritical carbon dioxide and Soxhlet methods were used for extraction. The extract was subjected to Gas Chromatography-Mass Spectrometer (GC-MS) and Fourier Transform Infrared for the characterization of the phyto-components. When compared to soxhlet extraction, more components (35) were eluted by supercritical fluid extraction (SFE), according to GC-MS screening. Rhizoctonia bataticola, Alternaria alternata, and Colletotrichum gloeosporioides were all successfully inhibited by P. juliflora leaf SFE extract, which demonstrated strong antifungal properties with mycelium percent inhibition of 94.07%, 93.15%, and 92.43%, respectively, compared to extract from Soxhlet, which registered 55.31%, 75.63% and 45.13% mycelium inhibition respectively. Also, SFE P. juliflora extracts registered higher zone of inhibition 13.90 mm, 14.47 mm and 14.53 mm against all three test food-borne bacterial pathogens viz Escherichia coli, Salmonella enterica and Staphylococcus aureus respectively. Results obtained from GC-MS screening revealed that SFE is more efficient than soxhlet extraction in recovering the phyto-components. P. juliflora may provide antimicrobial agents, a novel natural inhibitory metabolite.

Solubility of palbociclib in supercritical carbon dioxide from experimental measurement and Peng-Robinson equation of state

Palbociclib is a poorly water-soluble medicine which acts against metastatic breast cancer cells. Among various techniques to improve the solubility of this medicine, applying supercritical technologies to produce micro- and nano-sized particles is a possible option. For this purpose, extraction of solubility data is required. In this research, the solubility of palbociclib in supercritical carbon dioxide (ScCO₂) at different equilibrium conditions was measured at temperatures between 308 and 338 K and pressures within 12-27 MPa, for the first time. The minimum and maximum solubility data were found to be 8.1 × 10^-7 (at 338 K and 12 MPa) and 2.03 × 10^-5 (at 338 K and 27 MPa), respectively. Thereafter, two sets of models, including ten semi-empirical equations and three Peng-Robinson (PR) based integrated models were used to correlate the experimental solubility data. Bian's model and PR equation of state using van der Waals mixing rules (PR + vdW) showed better accuracy among the examined semi-empirical and integrated models, respectively. Furthermore, the self-consistency of the obtained data was confirmed using two distinct semi-empirical models. At last, the total and vaporization enthalpies of palbociclib solubility in ScCO₂ were calculated from correlation results of semi-empirical equations and estimated to be 40.41 and 52.67 kJ/mol, respectively.

Separation of hydrocarbons from activated carbon as a porous substance in a glycol regeneration process using supercritical carbon dioxide

Activated carbons are used in industrial applications; their cost is a major barrier to their more widespread application. Regeneration of activated carbons is indispensable to minimize operational costs and product wastage. Supercritical carbon dioxide (SC-CO₂) as green technology was used to regenerate activated carbons. In this work, response surface methodology was employed to optimize the supercritical regeneration process and to evaluate the effect of the operational parameters including pressure (100-300 bar), temperature (313-333 K), flow rate (2-6 g/min), and dynamic time (30-150 min) on the regeneration yield. The maximum regeneration yield (93.71%) was achieved at 285 bar, 333 K, 4 g/min, and 147 min. Mathematical modeling was done using two one-parameter kinetics models, which agree well with the experimental data. The fitting parameter of the model was obtained by using a differential evolution algorithm. The chemical composition of the substances extracted from the activated carbon was identified by gas chromatography. The results showed that the regeneration of activated carbon by SC-CO₂ can be an alternative method to conventional methods.

Supercritical Fluid Extraction from Zataria multiflora Boiss and Impregnation of Bioactive Compounds in PLA for the Development of Materials with Antibacterial Properties

In this research, the extraction with supercritical carbon dioxide (SC-CO2) and the subsequent impregnation of the extracted bioactive compounds from Zataria multiflora Boiss (Z. multiflora) into polylactic acid (PLA) films was investigated. The effects of temperature (318 and 338 K), pressure (15 and 25 MPa) and cosolvent presence (0 and 3 mol%) on the extraction yield were studied. The SC-CO2 assisted impregnation runs were carried out in a discontinuous mode at different pressure (15 and 25 MPa), temperature (318 and 328 K), and time (2 and 8 h) values, using 0.5 MPa min−1 as a constant value of depressurization rate. ANOVA results confirmed that pressure, temperature, and time influenced the extraction yield. Moreover, antioxidant activities of extracts of Z. multiflora were evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assays. In addition, the antibacterial activities of the extracts were screened against standard strains of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results of this investigation indicated that extracts obtained from the aerial parts of Z. multiflora possessed antioxidant and antibacterial properties. The impregnated samples presented strong antibacterial activity against the selected microorganisms.

Process Optimization for Supercritical Carbon Dioxide Extraction of Origanum vulgare L. Essential Oil Based on the Yield, Carvacrol, and Thymol Contents

Background

Origanum vulgare L. essential oil (OEO) is widely known for its good biological activity, but different extraction methods with significant implications on the yield of OEO and the content of the thymol and carvacrol. As an efficient method for extracting essential oils (EO), the supercritical carbon dioxide extraction (SC-CO2) can improve the yield of EOs while protecting their main active components from loss.

Objective

In this study, the process optimization of SC-CO2 of OEO was carried out. The effects of extraction pressure, temperature, time, and modifier concentration on the composite score of OEO extraction process were investigated.

Method

Response surface analysis was performed using a Box-Behnken design with three levels and four independent variables. Steam distillation (SD) and lipophilic solvents (n-hexane) extraction (LSE) were compared with SC-CO2 for OEO yields. OEOs extracted by the three methods were qualitatively and semi-quantitatively analyzed by gas chromatography quadrupole-time-of-flight mass spectrometry and gas chromatography-flame ionization detector.

Results

The results showed that extraction pressure was the most significant factor affecting the OEO yield, thymol, and carvacrol content. In the optimal conditions (pressure: 217 bar, temperature: 54°C, time: 2 h, modifier concentration: 14%), the yield of OEO reached up to 1.136%, and the contents of thymol and carvacrol reached 53.172  and 41.785 mg/g, respectively.

Conclusions

SC-CO2 was the best extraction method compared to the other two methods. Under the optimal conditions, yield and the content of main components can be effectively improved. It can provide a theoretical basis for the industrial extraction of OEO.

Highlights

Taking the comprehensive score as the index, the interaction between the four independent variables in the supercritical fluid extraction process was evaluated by the response surface method. The effects of extraction parameters on the yield of EOs and the contents of thymol and carvacrol were comprehensively investigated.

Chitosan stimulates secondary metabolite production and nutrient uptake in medicinal plant Dracocephalum kotschyi

BACKGROUND

A wide variety of secondary metabolites are synthesized from primary metabolites by plants which have a vast range in pharmaceutical, food additive and industrial applications. In recent years, the use of elicitors has opened a novel approach for the production of secondary metabolite compounds. Dracocephalum kotschyi is a valuable herb due to pharmaceutical compounds like rosmarinic acid, quercetin and apigenin. In the current study, foliar application of chitosan (0, 100, 400 mg L-1 ) as an elicitor was used.

RESULTS

After chitosan treatment, the amounts of hydrogen peroxide (H2 O2 ) increased and the plant was able to increase the activities of enzymatic (guaiacol peroxidase, catalase and phenylalanine ammonium lyase) and non-enzymatic (total phenols and flavonoids) defensive metabolites. Also, foliar spray of chitosan promoted nutrient absorption which led to the accumulation of macroelements in the plant.

CONCLUSIONS

Chitosan was found to be a very effective elicitor for improving rosmarinic acid and quercetin content (up to 13-fold). Also, the content of apigenin (anticancer flavonoid) showed 16-fold enhancement compared to the control. Therefore, the treatment of D. kotschyi leaves with chitosan caused a very large increase in the induction and production of important pharmaceutical compounds such as rosmarinic acid and quercetin. © 2020 Society of Chemical Industry.

Supercritical Fluid Extraction Kinetics of Cherry Seed Oil: Kinetics Modeling and ANN Optimization

This study was primarily focused on the supercritical fluid extraction (SFE) of cherry seed oil and the optimization of the process using sequential extraction kinetics modeling and artificial neural networks (ANN). The SFE study was organized according to Box-Behnken design of experiment, with additional runs. Pressure, temperature and flow rate were chosen as independent variables. Five well known empirical kinetic models and three mass-transfer kinetics models based on the Sovová’s solution of SFE equations were successfully applied for kinetics modeling. The developed mass-transfer models exhibited better fit of experimental data, according to the calculated statistical tests (R², SSE and AARD). The initial slope of the SFE curve was evaluated as an output variable in the ANN optimization. The obtained results suggested that it is advisable to lead SFE process at an increased pressure and CO₂ flow rate with lower temperature and particle size values to reach a maximal initial slope.

Extraction of essential oil from Dracocephalum kotschyi Boiss. (Lamiaceae), identification of two active compounds and evaluation of the antimicrobial properties

ETHNOPHARMACOLOGICAL RELEVANCE

Dracocephalum kotschyi is a medicinal plant widely used in traditional medicine to treat pain, fever, inflammation, and seizures.

AIM OF THE STUDY

Due to the importance of this plant and the well-known antibacterial activity of essential oils, the aim of the present study was to investigate the composition of essential oil and evaluate the antimicrobial activity of its main active compounds.

MATERIALS AND METHODS

In order to test its possible application at industrial level the oil was extract from the cultivated and wild plants. The epigean parts were collected in June 2018 from the same region of Daran (Isfahan, Iran). The extraction of essential oil was carried out using a Clevenger apparatus. The composition of the essential oil was assayed by using a gas chromatography/mass spectroscopy apparatus (GC/MS).

RESULTS

Results showed that the predominant compounds of essential oil of cultivated plants were α-pinene (13.66%), (E)-citral (12.89%), neral (11.25%), methyl geranate (8.66%), limonene (8.33%), campholenal (6.22%) and geraniol (5.69%), while those found in naturally grown plants were two main compounds: cyclohexylallene (52.63%) and limonene (35.88%). The antimicrobial properties of the plant were determined against 12 strains of microorganism by evaluating inhibition halo, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The highest inhibition halo for both oils from cultivated and wild plants was obtained against Aspergillus brasiliensis. The MIC value against Gram-positive Bacillus subtilis was 31.25 μg/ml, it was the lowest value provided by the essential oil obtained from the cultivated sample, the MIC was significantly lower than that obtained by treating the same strain with Rifampin. On the other hand, Candida albicans had the highest sensitivity (MIC value of 31.25 μg/ml) for the essential oil obtained from wild plants as the inhibitory concentration was lower than that obtained treating the yeast with Nystatin.

CONCLUSIONS

Therefore, according to the results of the present study, the use of the essential oil obtained from D. kotschyi can be used to protect food and to treat microbial infections.

Recent Advances in Supercritical Fluid Extraction of Natural Bioactive Compounds from Natural Plant Materials

In this review, recent advances in greener technology for extracting natural bioactive components from plant origin sources are discussed. Bioactive compounds of plant origin have been defined as natural chemical compounds present in small amounts in plants. Researchers have shown interest in extracting bioactive compounds because of their human health benefits and characteristics of being eco-friendly and generally recognized as safe. Various new extraction methods and conventional extraction methods have been developed, however, until now, no unique approach has been presented as a benchmark for extracting natural bioactive compounds from plants. The selectivity and productivity of traditional and modern extraction techniques generally depend on selecting the critical input parameters, knowing the nature of plant-based samples, the structure of bioactive compounds, and good scientific skills. This work aims to discuss the recent advances in supercritical fluid extraction techniques, especially supercritical carbon dioxide, along with the fundamental principles for extracting bioactive compounds from natural plant materials such as herbs, spices, aromatic and medicinal plants.

Recent advances of green pretreatment techniques for quality control of natural products

A few advancing technologies for natural product analysis have been widely proposed, which focus on decreasing energy consumption and developing an environmentally sustainable manner. These green sample pretreatment and analysis methods following the green Analytical Chemistry (GAC) criteria have the advantage of improving the strategy of chemical analyses, promoting sustainable development to analytical laboratories, and reducing the negative effects of analysis experiments on the environment. A few minimized extraction methodologies have been proposed for replacing the traditional methods in the quality evaluation of natural products, mainly including solid-phase microextraction (SPME) and liquid phase microextraction (LPME). These procedures not only have no need for large numbers of samples and toxic reagent, but also spend a small amount of extraction and analytical time. This overview aims to list out the main green strategies on the application of quality evaluation and control for natural products in the past 3 years.

The effect of pressure on the characteristics of supercritical carbon dioxide extracts from Calamintha nepeta subsp. nepeta

Chemists and industrialists are continuously attempting to develop greener and more environmentally benign chemical processes to extract essential oils and bioactive metabolites of high purity, finding various applications in cosmetics, detergents, nutraceuticals and pharmaceuticals. An increase preferenced for natural products over synthetic ones has made supercritical fluid technology a primary alternative for the generation of high-value bioactive ingredients. This effective technique requires only moderate temperatures, eliminates clean-up steps and avoids the use of harmful organic solvents. In this context, our study was focused on the chemical analysis of Calamintha nepeta subsp. nepeta aromatic extracts obtained with supercritical carbon dioxide. The effect of different operating conditions on the capacity of the lipophilic solvent to extract the targeted volatile components was also studied. The process was carried out at a fairly low constant temperature of 40°C, and with varying the pressure from 90 to 300 bar. The chemical composition of the extracts was analyzed by gas chromatography-mass spectroscopy. The results showed that the composition pattern, the concentrations of individual components and the quality of the extractable analytes were affected by pressure increase. The extraction yields varied from 0.73 to 1.21 wt% at 90 and 300 bar, respectively.