GO@Fe3O4@ZnO@CS nanocomposite as a novel adsorbent for removal of doxorubicin hydrochloride from aqueous solutions

Superior adsorption and removal of doxorubicin from aqueous solution using activated carbon via thermally treated green adsorbent: isothermal, kinetic, and thermodynamic studies

Activated carbon from apricot seeds (ASAC) was successfully made using a low-cost, straightforward synthesis process. With the use of various instruments, including XRD, XPS, FT-IR, SEM, and TEM, the adsorbent was demonstrated. The surface area of the ASAC that was given was also shown to be 436.8 m2/g. It was discovered that the synthesized ASAC has a fantastic capacity to absorb the anti-cancer medication doxorubicin hydrochloride (DOX). Based on changes in temperature, pH, and DOX concentration, The DOX adsorption behaviour's mechanism was evaluated. The adsorption capacity of ASAC for DOX was greater at pH 6.0, according to experimental data as the adsorption capacity was discovered to be 951.13 mg/g. Adsorption equilibrium analysis revealed that, when compared to the other models, the Langmuir adsorption provided the best fit to the data that were collected. Additionally, The ASAC has validated the DOX activation energy of adsorption as a chemisorption technique. The kinetics of adsorption were shown to be fitted to pseudo-second-order kinetic model. The reaction was endothermic and spontaneous, according to thermodynamic data. Innvestigation the removal efficiency of ASAC to remove DOX from real watrer sample (tap water, effluent wastewater, and impact wastewater). It was suggested by the results that ASAC was a viable option for treating wastewater and adsorbing DOX. The synthesized ASAC has noteworthy cyclability and reusability characteristics due to its high efficiency (up to five cycles) and low cost (around 86 percent).

Agro-Waste Valorization into Carbonaceous Eco-Hydrogel: A Circular Economy and Zero Waste Tactic for Doxorubicin Removal in Water/Wastewater

The existing work aims to evaluate the efficiency of eco-hydrogel for adsorption of pollutants prepared from biopolymeric matrix and agricultural waste-derived biochar. An efficient and reusable adsorbent, designed from the integration of maize stalk activated carbon into a gelatin-alginate composite (MSAC@GE-SA) was explored for removal of doxorubicin hydrochloride (Doxo.HCL) from polluted water. The structural properties, presence of surface functional groups, and elemental composition were explored using XRD, SEM, BET, FTIR, and XPS techniques. The key adsorption parameters such as Doxo.HCL concentration, MSAC@GE-SA amount, solution pH, and the contact time between adsorbate and adsorbents were successfully optimized for the effective removal of Doxo.HCL (qmax = 239.41 mg g-1). The kinetic mechanism of MSAC@GE-SA fits well with a pseudo-second-order rate model (R2 = 0.980), followed by mono- and multilayered Langmuir and Freundlich isotherms with R2 values 0.991 and 0.993, respectively. The recyclability of MSAC@GE-SA showed great stability without any physical damage and having sustained removal efficiency up to 10 cycles (96.32 to 55.66%). The versatility of MSAC@GE-SA was further investigated for river, canal, and sewage water samples under identical experimental conditions. The practicality of the MSAC@GE-SA was evaluated by spiking Doxo.HCL into industrial effluents via the standard addition method. Subsequently, the chemical oxygen demand (COD) of the treated pollutants exhibited a notable reduction, decreasing significantly from 128 to 80 mg L-1. Following 10 successful adsorption-desorption cycles, the spent MSAC@GE-SA was utilized as a fertilizer for Vigna radiata plants, positively contributing to overall plant growth without causing harm. Hence, proposed adsorbent (MSAC@GE-SA) emerges as a viable and sustainable solution, demonstrating features of reusability and cost-effectiveness. It holds significant promise for the removal of pharmaceutical pollutants, aligning with the principles of circular economy and zero-waste tactics.

Removal of fluorouracil from aqueous environment using magnetite graphene oxide modified with γ-cyclodextrin

Fluorouracil (FU) is a widely utilized antineoplastic medication in the pharmaceutical industry for combating gastrointestinal cancers. However, its presence in wastewater originating from pharmaceutical facilities and hospital effluents has a potential effect on DNA, and cannot be efficiently eliminated through conventional treatment methods. Consequently, the adoption of advanced technologies becomes crucial for effectively treating such wastewater. Accordingly, this study investigated the efficiency of magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin for removing fluorouracil from aqueous solutions. The magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin was synthesized via the hydrothermal method. Next, the effect of pH, temperature, adsorbent content, and contact time on the fluorouracil removal efficiency was explored. Ultimately, the experimental data were matched against Langmuir, Freundlich, and Temkin isotherms and Kinetic models. Accordingly, the efficiency of the absorbent used was dependent on the pH, contact time, temperature, and initial concentration of the adsorbent. The results indicated that the maximum removal efficiency for fluorouracil was achieved within the contact time of 45 min and adsorbent content of 0.020 g. In addition, the optimal pH for removing the medicine was 7. The conditions of the adsorption process followed Langmuir isotherm with correlation coefficients of 0.992 and a quasi-second kinetic model with a correlation coefficient of 0.999, with the maximum adsorption capacity of the adsorbent synthesized for the evaluated medicine estimated as 190.9 mg/g. The results showed that the magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin could be used as an effective and available adsorbent for removing fluorouracil from pharmaceutical wastewater.

Efficiency of Fe3O4@ZIF-8 for the removal of Doxorubicin from aqueous solutions: equilibrium, kinetics and thermodynamic studies

Due to inadequate pharmaceutical wastewater treatment, anticancer contaminants from the pharmaceutical industry frequently end up in the aquatic environment where they endanger aquatic life and humans. As a result, the appropriate treatment of wastewater that contains anticancer agents is crucial for pollution prevention. The purpose of this work is to assess the effectiveness of a Fe3O4@ZIF-8 nanocomposite as an adsorbent to remove of the chemotherapeutic drugs doxorubicin (DOX) from aqueous solution. SEM, XRD, BET, FT-IR, Zeta potential, and point of zero charge analysis were used to study the surface and structural characteristics of the Fe3O4@ZIF-8 nanocomposite. Via the proposed treatment, 804.84 mg/g elimination was successful under the following circumstances: pH = 6; Fe3O4@ZIF-8 dose = 0.02 g/25 mL; DOX concentration = 1.22x10-3 mol; adsorption time = 100 min; and shaking speed = 200 rpm. A investigation of isotherms shown that the Langmuir equation and experimental data suited each other quite well. The adsorption of DOX on Fe3O4@ZIF-8 was endothermic and spontaneous, in accordance with thermodynamic properties. Furthermore, the elimination of DOX was enhanced by the rise in solution temperature. The kinetic analysis revealed that the pseudo-second order was fitted by the model. The suggested adsorption method could recycle Fe3O4@ZIF-8 nanocomposite six times, with a modest reduction in its ability for adsorption. For all XRD reflection peaks, physical characteristics including strain rates were computed and the dislocation of was 4.7 × 10-6. Investigate the activity of the DOX towards COVID-19, breast and prostate cancer using molecular docking.

Cr(VI) and doxorubicin adsorptive capture by a novel bionanocomposite of Ti-MOF@TiO2 incorporated with watermelon biochar and chitosan hydrogel

Biodegradable polymers, biochars and metal organic frameworks (MOFs) have manifested as top prospects for elimination of harmful pollutants. In the current study, Ti-MOF was synthesized and decorated with TiO2 nanoparticles, then embedded into watermelon peel biochar and functionalized with chitosan hydrogel to produce Ti-MOF@TiO2@WMPB@CTH. Various instruments were employed to assure the effective production of the bionanocomposite. The HR-TEM and SEM studies referred to excellent surface porosity and homogeneity of Ti-MOF@TiO2@WMPB@CTH bionanocomposite, with 51.02-74.23 nm. Based on the BET analysis, the mesoporous structure has a significant surface area of 366.04 m2 g-1 and a considerable total pore volume of 11.38 × 10-2 cm3 g-1, with a mean pore size of 12.434 nm. Removal of doxorubicin (DOX) and hexavalent chromium (Cr(VI)) was examined under various experimentations. Pseudo-second order kinetic models in addition to Langmuir isotherm offered the best fitting. Thermodynamic experiments of the two contaminants demonstrated spontaneous and endothermic interactions. After five subsequent adsorption and desorption cycles, Ti-MOF@TiO2@WMPB@CTH bionanocomposite demonstrated an exceptional recyclability for the elimination of DOX and Cr(VI) ions, reaching 97.96 % and 95.28 %, respectively. Finally, the newly designed Ti-MOF@TiO2@WMPB@CTH bionanocomposite demonstrated a high removing efficiency of Cr(VI) ions and DOX from samples of real water.

Fabricating of Fe3O4@Ag-MOF nanocomposite and evaluating its adsorption activity for removal of doxorubicin

The purpose of this research was to investigate the doxorubicin (DOX) adsorption behavior on Fe3O4@Ag-Metal Organic Framework (Fe₃O₄@Ag-MOF). This adsorbent was effectively prepared using a simple synthetic process. Many instruments, including FTIR, XRD, SEM, TEM, and XPS, were used to characterized the new Fe₃O₄@Ag-MOF. Additionally, the presented Fe₃O₄@Ag-surface MOF's area was shown to be 586.06 m2/g with a size of around 43 nm. The composite that was made has magnetic properties that were quite strong (63.3 emu/g). The produced Fe₃O₄@Ag-MOF was discovered to have a fantastic ability to adsorb the anti-cancer drug DOX, with a 1.72 mmol/g (934.85 mg/g) adsorption capacity. On the basis of changes in temperature, pH, and DOX concentration, the DOX adsorption behavior mechanism was investigated. The adsorption capacity of Fe₃O₄@Ag-MOF for DOX was greater at pH 7.0, according to experimental data. The adsorption equilibrium also demonstrated that the Langmuir adsorption was regulated the best fit to the extracted data compared with the other models. Additionally, the activation energy of adsorption for DOX onto Fe₃O₄@Ag-MOF was determined, indicating the chemisorption process. The adsorption kinetics was shown in the well-known kinetic model of the pseudo-second-order. The adsorption thermodynamic measurements were documented according to according to the enthalpy (ΔH°), entropy(ΔS°), and Gibbs free energy (ΔG°) parameters demonstrated that the reaction was endothermic and spontaneous thermodynamic. The adsorption of DOX onto Fe₃O₄@Ag-MOF from real water samples (tap water, effluent wastewater, and influence wastewater) were investigated. It's interesting that the synthetic adsorbent had great recyclability 72.6 percent in the fifth cycle indicating that it was highly recyclable. After adsorption, the typical Fe₃O₄@Ag-MOF XRD peak intensities and locations were mostly unchanged throughout adsorption indicates the crystalline phase remained steady. The results indicated that Fe₃O₄@Ag-MOF were a good candidate for adsorbing the DOX and treating wastewater.

Synthesis of ferroferric oxide@silicon dioxide/cobalt-based zeolitic imidazole frameworks for the removal of doxorubicin hydrochloride from wastewater

Due to its low-cost, eco-friendliness and easy mode of separation biosynthesized magnetic ferroferric oxide (Fe₃O₄) can be successfully used for the removal of organic contaminants from wastewater. However, there are some challenges that to date have limited this compound's practical removal efficiency. Thus, in this study, a cobalt-based zeolitic imidazole frameworks (ZIF-67) coated biosynthesized ferroferric oxide@silicon dioxide (Fe₃O₄@SiO₂) magnetic composite (Fe₃O₄@SiO₂/ZIF-67) was prepared to address these issues and subsequently used to remove doxorubicin hydrochloride (DOX). Characterization results showed that the fabricated composite exhibited significant magnetic properties (16.1 emu·g^-1) with a size ranging between 50 and 250 nm. The amount of DOX adsorbed by the composite (90.7 mg·g^-1) was much higher than either of the component parts, which were only 35.7 and 82.5 mg·g^-1 for Fe₃O₄@SiO₂ and ZIF-67 respectively. This indicated enhanced DOX adsorption by Fe₃O₄@SiO₂/ZIF-67. The DOX adsorption best fit a pseudo-second order kinetic and Langmuir adsorption model. These studies suggested that the DOX adsorption mechanism involved a combination of electrostatic interactions, π-π stacking, hydrogen bonding and pore filling. Regeneration and application studies, exposing Fe₃O₄@SiO₂/ZIF-67 to real water samples, practically demonstrated that Fe₃O₄@SiO₂/ZIF-67 with propensity for magnetic separation and recycle is a promising nanomaterial for DOX removal.

Magnetite graphene oxide modified with β-cyclodextrin as an effective adsorbent for the removal of methotrexate and doxorubicin hydrochloride from water

The purpose of this investigation was to analyze the performance of magnetite graphene oxide modified with β-cyclodextrin (GO@Fe₃O₄@β-CD) for adsorption of methotrexate (MTX) and doxorubicin (DOX) from aqueous solutions. Characterization of GO@Fe₃O₄@β-CD was carried out using some methods. The perfect conditions for the adsorption of MTX and DOX were 7.0, 45 min, 20 mg, and 25 °C for solution pH, contact time, adsorbent dose, and temperature, respectively, with removal efficiency values of 97.8% and 98.5% for MTX and DOX, respectively. The adsorption kinetic of MTX and DOX via GO@Fe₃O₄@β-CD followed pseudo second-order (PSO) model, while the adsorption isotherm obeyed Langmuir model by monolayer adsorption with maximum adsorption capacities of 198.5 and 204.5 mg g^-1 for MTX and DOX, respectively. Therefore, it could be argued that HCl and 0.1 mol L^-1 NaOH would reflect adequate elution properties for GO@Fe₃O₄@β-CD recovery.