Primordia initiation of mushroom (Agaricus bisporus) strains on axenic casing materials

Influence of the chemical content of sawdust on the levels of important macronutrients and ash composition in Pearl oyster mushroom (Pleurotus ostreatus)

Influence of chemical composition of sawdust on the nutritional profile of oyster mushrooms (Pleurotus ostreatus) has yet to receive significant research attention. This information will help mushroom growers to select specific sawdust for the production of mushroom with desired dietary preferences. This study assessed the influence of the chemical composition of sawdust on the macronutrients and ash content of the pearl oyster mushrooms. The American Standard for Testing Materials and other widely accepted protocols were used to determine the C-N ratio, pH, lignin, hemicellulose and cellulose contents of mixed sawdust from tropical wood species. The study evaluated the fat, crude fibre, crude protein, carbohydrate, and ash content of the oyster mushroom cultivated on the sawdust. Cellulose constituted the largest component of the sawdust (47.82%), followed by lignin (33.29%). The yield of the mushroom (on 0.05 kg of sawdust) ranged from 490.1 to 540.9 g (biological efficiency: 44-50%); the average carbohydrates constituent in the mushroom was 56.28%. pH of the sawdust influenced the crude protein, carbohydrate, fat and ash content of oyster mushrooms (p<0.05) most significantly. The hemicelluloses also had a significant effect (p<0.05) on the mushroom's minerals, fat and crude fiber content. The study revealed that the mushroom producers would likely obtain high protein content using sawdust with low pH (slightly acidic to slightly basic) in the oyster mushroom. Mushrooms grown on substrates, rich in hemicelluloses, had low fat and high crude fiber content.

Influence of the casing layer on the specific volatile compounds and microorganisms by Agaricus bisporus

One of the major variables affecting yield of the mushroom Agaricus bisporus is the casing layer, which directly affects the productivity and mass. Here, volatile organic compounds were extracted by headspace solid-phase microextraction and high-throughput sequencing was used to analyze the microbial community diversity. The relationship between mushroom yield at different cropping stages and the contents of volatile organic compounds and microorganisms in three different casing layers: peat, peat + soil and soil were systematically evaluated. The result shows that Benzaldehyde and (E)-2-octenal which stimulate yield, obviously increased as mushrooms grew, while 3-octanone, which inhibits yield, decreased over time in all three casing layers. However, there was not a strong correlation between the concentration of volatile compounds and yield. In addition, more than 3,000 bacterial operational taxonomic units (OTUs) by performing high throughput sequencing of the microbes were obtained in the three casing layers. Interestingly, the microbial community compositions were very similar between the three casing layers at a later cropping stage, but the community richness varied significantly in different casing layers and at different cropping stages. At the phylum level, the communities had similar structures but were quantitively very different, and this was even more obvious at the genus level. Principal component analysis revealed significant alterations in microbial community structure in different casing layers. Sphingomonas, Dongia and Achromobacter were the dominant genera at cropping stage 1, and the stage 3 were abundant in Saccharibacteria_norank, Pseudomonas, Flavobacterium and Brevundimonas, which was positively correlated with yield, while the abundance of Pseudomonas at stage 1 and Lactococcus and Bacillus at stage 3 was negatively correlated with yield. These results provide a guide for the development and agricultural application of microbial agents for yield improvement in the production of A. bisporus.

Fate of antibiotic resistance genes in cultivation substrate and its association with bacterial communities throughout commercial production of Agaricus bisporus

Animal manure is an important raw material for Agaricus bisporus production; however, it is also a reservoir for antibiotic residues, antibiotic resistance genes (ARGs), and antibiotic-resistant bacteria. Little is known about the influence of the commercial cultivation of A. bisporus on the dynamics of ARGs and the underlying mechanisms that cause their variations. In this study, we investigated the fate of 285 ARGs, 10 mobile genetic elements, and seven major categories of antibiotic residues in substrate and mushroom samples at different production phases. The results showed that commercial substrate preparation, particularly the pasteurization phase, was highly efficient in removing ARGs from the substrate. We further found that mycelium proliferation of A. bisporus contributed significantly to the removal of ARGs from the substrate and casing soil. The bacterial community is the key driver of changes in ARGs during the commercial cultivation of A. bisporus, which explained 46.67% of the variation in ARGs. Our results indicate that, despite the addition of animal manure, the risk of ARG dissemination to fruiting bodies and the environment is low. We propose that bioremediation by specific edible fungi might be a novel and promising method for scavenging antimicrobial resistance contamination from soil environment.

Feeding growing button mushrooms: The role of substrate mycelium to feed the first two flushes

A number of experiments were done to further our understanding of the substrate utilization in button mushroom crops (Agaricus bisporus). An analysis of the degradation of dry matter of the substrate during a crop cycle revealed that for pin formation the upper 1/3rd layer is used, for the production of flush one all layers are involved and for flush two mainly the lower 1/3 layer is used. A reduction in substrate depth leads to a decrease in yield/m2 but an apparent increase in yield per tonne of substrate with a lower mushroom quality. A short daily interruption of the connection between the casing soil with the substrate results in a delay of the first flush. Interruptions with only part of the substrate did not lead to delay in production. Daily interruption of the connection with all or only part of the substrate leads to a shift in yield from flush one to flush two but the total yield remains unchanged. The mycelial biomass in the substrate increases from filling up to pinning, has a steeper increase during flush one, and is levelling off during flush two, indicating that in the period of venting and up to/including flush one, enzymes are secreted by growing hyphae generating nutrients to feed a fixed amount of mushroom biomass for two flushes. A sidewise extension of the substrate (without casing soil, thus not producing mushrooms) showed that the substrate at a distance more than somewhere between 20-50 cm away from the casing soil does not contribute to feeding mushrooms in the first two flushes. The observations are discussed with respect to relevant previous research.

Enhanced growth and yield of oyster mushroom by growth-promoting bacteria Glutamicibacter arilaitensis MRC119

Promotion of mushroom growth by means of biological agents replacing chemicals is an emerging and highly demanded issue in the sector of mushroom cropping. The present study was aimed to search for a novel bacterium potentially able to enhance mushroom growth and yield. A total of 2165 bacterial isolates purified from different samples were scrutinized through various growth-promoting attributes. As a consequence of rigorous screening, 26 isolates found exhibiting positive traits of mushroom growth promotion. Thereafter, in response to the cocultivation (fungus and bacteria), a potent bacterial strain was isolated capable to improve significantly the mycelial growth. In cocultivation the highest radial and linear growth rate was 7.6 and 8.1 mm/day on 10th and 11th days, respectively. The fruitbody yields and biological efficiency (BE) of the inoculated sets were 28% and 58% higher than the uninoculated control sets. The bacterium was molecularly identified based on 16S ribosomal RNA sequencing and confirmed as Glutamicibacter arilaitensis MRC119. Therefore, the bioinoculant of the current bacterium can be potentially useful as an ecofriendly substitute stimulating the production of mushroom fruit bodies with improved BE.

Critical Factors Involved in Primordia Building in Agaricus bisporus: A Review

The button mushroom Agaricus bisporus is an economically important crop worldwide. Many aspects of its cultivation are well known, except for the precise biological triggers for its fructification. By and large, for most basidiomycete species, nutrient availability, light and a drop in temperature are critical factors for fructification. A. bisporus deviates from this pattern in the sense that it does not require light for fructification. Furthermore its fructification seems to be inhibited by a self-generated factor which needs to be removed by microorganisms in order to initiate fruiting. This review explores what is known about the morphogenesis of fruiting initiation in A. bisporus, the microflora, the self-inhibitors for fruiting initiation and transcription factors involved. This information is subsequently contrasted with an overall model of the regulatory system involved in the initiation of the formation of primordia in basidiomycetes. The comparison reveals a number of the blank spots in our understanding of the fruiting process in A. bisporus.

100 Years Since Tolaas: Bacterial Blotch of Mushrooms in the 21st Century

Among the biotic constraints of common mushroom (Agaricus bisporus) production, bacterial blotch is considered the most important mushroom disease in terms of global prevalence and economic impact. Etiology and management of bacterial blotch has been a major concern since its original description in 1915. Although Pseudomonas tolaasii is thought to be the main causal agent, various Pseudomonas species, as well as organisms from other genera have been reported to cause blotch symptoms on mushroom caps. In this review, we provide an updated overview on the etiology, epidemiology, and management strategies of bacterial blotch disease. First, diversity of the causal agent(s) and utility of high throughput sequencing-based approaches in the precise characterization and identification of blotch pathogen(s) is explained. Further, due to the limited options for use of conventional pesticides in mushroom farms against blotch pathogen(s), we highlight the role of balanced threshold of relative humidity and temperature in mushroom farms to combat the disease in organic and conventional production. Additionally, we discuss the possibility of the use of biological control agents (either antagonistic mushroom-associated bacterial strains or bacteriophages) for blotch management as one of the sustainable approaches for 21^st century agriculture. Finally, we aim to elucidate the association of mushroom microbiome in cap development and productivity on one hand, and blotch incidence/outbreaks on the other hand.

Bacterial Profiling and Dynamic Succession Analysis of Phlebopus portentosus Casing Soil Using MiSeq Sequencing

Phlebopusportentosus (Berk. and Broome) Boedijin is a popular edible mushroom found in China and Thailand. To date, P. portentosus is the only species in the order Boletales that can be successfully cultivated worldwide. The use of a casing layer or casing soil overlaying the substrate is a crucial step in the production of this mushroom. In this study, bacterial profiling and dynamic succession analyses of casing soil during the cultivation of P. portentosus were performed. One hundred and fifty samples were collected, and MiSeq sequencing of the V3-V4 region of the 16S rRNA gene was conducted. After performing a decontamination procedure, only 38 samples were retained, including 6 casing soil-originated samples (OS), 6 casing soil samples (FHCS) and 5 upper substrate samples (FHCU) from the period of complete colonization by mycelia; 6 casing soil samples (PCS) and 5 upper substrate samples (PCU) from the primordium period; and 6 casing soil samples (FCS) and 4 upper substrate samples (FCU) from fruit body period. The results revealed that bacterial diversity increased sharply from the hyphal to the primordium stage and then decreased during harvesting. The non-metric multidimensional scaling (NMDS) ordination and analysis of similarities (ANOSIM) analysis suggested that the community composition during different stages was significantly different in casing soil. The most abundant phyla in all of the samples were Proteobacteria, Chloroflexi, Acidobacteria, Actinobacteria, Saccharibacteria, and Bacteroidetes. Burkholderia was the most abundant genus in all the samples except the OS samples. The relative abundance of Burkholderia in the FHCS samples (55.79%) decreased to 35.14% in the PCS samples and then increased to 45.60% in the FCS samples. The abundances of Acidobacterium, Rhizobium, Acidisphaera, Bradyrhizobium, and Bacillus increased from the FHCS to PCS samples. The linear discriminant analysis (LDA) effect size (LEfSe) suggested that Acidobacterium and Acidisphaera are micromarkers for PCS, whereas Bradyrhizobium, Roseiarcus, and Pseudolabrys were associated with fruit body stages. The network analyses resulted in 23 edges, including 4 negative and 19 positive edges. Extensive mutualistic interactions may occur among casing soil bacteria. Furthermore, these bacteria play important roles in mycelial elongation, primordium formations, and the production of increased yields.

Compost bacteria and fungi that influence growth and development of Agaricus bisporus and other commercial mushrooms

Mushrooms are an important food crop for many millions of people worldwide. The most important edible mushroom is the button mushroom (Agaricus bisporus), an excellent example of sustainable food production which is cultivated on a selective compost produced from recycled agricultural waste products. A diverse population of bacteria and fungi are involved throughout the production of Agaricus. A range of successional taxa convert the wheat straw into compost in the thermophilic composting process. These initially break down readily accessible compounds and release ammonia, and then assimilate cellulose and hemicellulose into compost microbial biomass that forms the primary source of nutrition for the Agaricus mycelium. This key process in composting is performed by a microbial consortium consisting of the thermophilic fungus Mycothermus thermophilus (Scytalidium thermophilum) and a range of thermophilic proteobacteria and actinobacteria, many of which have only recently been identified. Certain bacterial taxa have been shown to promote elongation of the Agaricus hyphae, and bacterial activity is required to induce production of the mushroom fruiting bodies during cropping. Attempts to isolate mushroom growth-promoting bacteria for commercial mushroom production have not yet been successful. Compost bacteria and fungi also cause economically important losses in the cropping process, causing a range of destructive diseases of mushroom hyphae and fruiting bodies. Recent advances in our understanding of the key bacteria and fungi in mushroom compost provide the potential to improve productivity of mushroom compost and to reduce the impact of crop disease.

Microbial ecology of the Agaricus bisporus mushroom cropping process

Agaricus bisporus is the most widely cultivated mushroom species in the world. Cultivation is commenced by inoculating beds of semi-pasteurised composted organic substrate with a pure spawn of A. bisporus. The A. bisporus mycelium subsequently colonises the composted substrate by degrading the organic material to release nutrients. A layer of peat, often called "casing soil", is laid upon the surface of the composted substrate to induce the development of the mushroom crop and maintain compost environmental conditions. Extensive research has been conducted investigating the biochemistry and genetics of A. bisporus throughout the cultivation process; however, little is currently known about the wider microbial ecology that co-inhabits the composted substrate and casing layers. The compost and casing microbial communities are known to play important roles in the mushroom production process. Microbial species present in the compost and casing are known for (1) being an important source of nitrogen for the A. bisporus mycelium, (2) releasing sugar residues through the degradation of the wheat straw in the composted substrate, (3) playing a critical role in inducing development of the A. bisporus fruiting bodies and (4) acting as pathogens by parasitising the mushroom mycelium/crop. Despite a long history of research into the mushroom cropping process, an extensive review of the microbial communities present in the compost and casing has not as of yet been undertaken. The aim of this review is to provide a comprehensive summary of the literature investigating the compost and casing microbial communities throughout cultivation of the A. bisporus mushroom crop.

Environmental impact of mushroom compost production

BACKGROUND

This research analyses the environmental impact of the creation of Agaricus bisporus compost packages. The composting process is the intermediate stage of the mushroom production process, subsequent to the mycelium cultivation stage and prior to the fruiting bodies cultivation stage.

RESULTS

A full life cycle assessment model of the Agaricus bisporus composting process has been developed through the identification and analysis of the inputs-outputs and energy consumption of the activities involved in the production process. The study has been developed based on data collected from a plant during a 1 year campaign, thereby obtaining accurate information used to analyse the environmental impact of the process.

CONCLUSION

A global analysis of the main stages of the process shows that the process that has the greatest impact in most categories is the compost batch preparation process. This is due to an increased consumption of energy resources by the machinery that mixes the raw materials to create the batch. At the composting process inside the tunnel stage, the activity that has the greatest impact in almost all categories studied is the initial stage of composting. This is due to higher energy consumption during the process compared to the other stages. © 2015 Society of Chemical Industry.

The transcriptional regulator c2h2 accelerates mushroom formation in Agaricus bisporus

The Cys2His2 zinc finger protein gene c2h2 of Schizophyllum commune is involved in mushroom formation. Its inactivation results in a strain that is arrested at the stage of aggregate formation. In this study, the c2h2 orthologue of Agaricus bisporus was over-expressed in this white button mushroom forming basidiomycete using Agrobacterium-mediated transformation. Morphology, cap expansion rate, and total number and biomass of mushrooms were not affected by over-expression of c2h2. However, yield per day of the c2h2 over-expression strains peaked 1 day earlier. These data and expression analysis indicate that C2H2 impacts timing of mushroom formation at an early stage of development, making its encoding gene a target for breeding of commercial mushroom strains.

Bacterial-fungal interactions: hyphens between agricultural, clinical, environmental, and food microbiologists

Bacteria and fungi can form a range of physical associations that depend on various modes of molecular communication for their development and functioning. These bacterial-fungal interactions often result in changes to the pathogenicity or the nutritional influence of one or both partners toward plants or animals (including humans). They can also result in unique contributions to biogeochemical cycles and biotechnological processes. Thus, the interactions between bacteria and fungi are of central importance to numerous biological questions in agriculture, forestry, environmental science, food production, and medicine. Here we present a structured review of bacterial-fungal interactions, illustrated by examples sourced from many diverse scientific fields. We consider the general and specific properties of these interactions, providing a global perspective across this emerging multidisciplinary research area. We show that in many cases, parallels can be drawn between different scenarios in which bacterial-fungal interactions are important. Finally, we discuss how new avenues of investigation may enhance our ability to combat, manipulate, or exploit bacterial-fungal complexes for the economic and practical benefit of humanity as well as reshape our current understanding of bacterial and fungal ecology.

Evaluation of in situ functional activity of casing soils during growth cycle of mushroom (Agaricus bisporus (Lange) Imbach) employing community level physiological profiles (CLPPs)

Community level physiological profiles (CLPPs) have been rarely applied to mushroom compost ecosystem, probably for the lack of standardized methodology. Recently, however CLPPs have been employed as a tool to investigate the degree of maturity of compost (Mondini and Insam, 2005, Compost Science and Utilization, 13(1): 27-33). The potential of CLPPs to detect compost maturity test is considerably significant in that it provides sensitivity and the simplicity of the assay. The aim of this work was to investigate the maturity of casing that comprised of farm yard manure and spent compost and influence of casing type on the behaviour of bacterial community during the growth cycle of mushroom Agaricus bisporus (Lange) Imbach employing standardized inoculum density and effects of different data interpretation based on the kinetics of colour formation. Casing samples of different age were extracted at a particular dilution and then inoculated in 96 well microtitre plates. Optical density (OD) in well was measured at 590 nm every 24 hours for 5 days. Principal component analysis (PCA) was performed by employing OD values at fixed average well colour development (AWCD). PCA of fresh samples showed that classification and ordination of samples according to their age were significant with fixed AWCD.

Volatile C8 compounds and pseudomonads influence primordium formation of Agaricus bisporus

Primordium formation of Agaricus bisporus depends on the presence of a casing layer containing stimulatory bacteria and on sufficient air exchange. The influence of specific pseudomonad populations and volatile organic compounds (VOC) on primordium formation of A. bisporus was studied in microcosm cultures. VOC produced by A. bisporus mycelium were predominantly C8 compounds, some of which could inhibit primordium formation, with 1-octen-3-ol being most inhibitory. A VOC produced by the rye grain substrate, 2-ethyl-1-hexanol, on which A. bisporus was grown also inhibited primordium formation. 2-Ethyl-1-hexanol and 1-octen-3-ol were metabolized by pseudomonad populations and adsorbed by activated charcoal, with both modes of removal enabling primordium formation in the casing. Removal of VOC by ventilation also enabled primordium formation to occur under axenic conditions. The presence of 2-ethyl-1-hexanol and 1-octen-3-ol in the microcosms resulted in higher total bacterial and pseudomonad populations in the casing. The stimulatory effects of the casing and its microbiota and air exchange on primordium formation of A. bisporus at least partly are due to the removal of inhibitory C8 compounds produced by the mycelium and its substrate. Monitoring and controlling the levels of these inhibitory VOC in mushroom culture should enable primordium formation of A. bisporus to be more efficiently and precisely controlled.

Evaluating the addition of activated carbon to heat-treated mushroom casing for grain-based and compost-based substrates

Two substrates, a non-composted grain spawn substrate and a traditional composted substrate, each covered with peat-based casing that contained varying amounts of activated carbon (AC) and each receiving different heat-treatment durations, were tested for Agaricus bisporus mushroom production. The amounts of AC were 0, 5, 10, 15, and 20% v/v, and the heat treatments were 0, 60, and 180 min at 121 degrees C and 103.4 kPa. Overall, the addition of AC up to 10-15% of casing for a grain spawn substrate increased mushroom yield. However, the addition of AC to the casing for compost substrates had no significant effect on yield, whereas heat-treating the casing increased yield. The onset of fruiting was retarded in grain spawn treatments not receiving AC with heat-treatment durations of 60 and 180 min, whereas this effect was not as apparent for the compost substrates. On average, mushroom yield was greater for the grain spawn substrate (366 g) than for compost substrate (287 g). For grain spawn substrate, the results show that the addition of AC ranging from 5% to 10% was adequate for maximum mushroom production.