Method for measuring wear on boot outsoles using a 3D laser scanner

Construction industry workers' compensation injury claims due to slips, trips, and falls - Ohio, 2010-2017

PROBLEM

Compared to other industries, construction workers have higher risks for serious fall injuries. This study describes the burden and circumstances surrounding injuries related to compensable slip, trip, and fall (STF) claims from private construction industries covered by the Ohio Bureau of Workers' Compensation.

METHODS

STF injury claims in the Ohio construction industry from 2010-2017 were manually reviewed. Claims were classified as: slips or trips without a fall (STWOF), falls on the same level (FSL), falls to a lower level (FLL), and other. Claim narratives were categorized by work-related risk and contributing factors. Demographic, employer, and injury characteristics were examined by fall type and claim type (medical-only (MO, 0-7 days away from work, DAFW) or lost-time (LT, ≥8 DAFW)). Claim rates per 10,000 estimated full-time equivalent employees (FTEs) were calculated.

RESULTS

9,517 Ohio construction industry STF claims occurred during the 8-year period, with an average annual rate of 75 claims per 10,000 FTEs. The rate of STFs decreased by 37% from 2010 to 2017. About half of the claims were FLL (51%), 29% were FSL, 17% were STWOF, and 3% were "other." Nearly 40% of all STF claims were LT; mostly among males (96%). The top three contributing factors for STWOF and FSL were: slip/trip hazards, floor irregularities, and ice/snow; and ladders, vehicles, and stairs/steps for FLL. FLL injury rates per 10,000 FTE were highest in these industries: Foundation, Structure, and Building Exterior Contractors (52); Building Finishing Contractors (45); and Residential Building Construction (45). The highest rate of FLL LT claims occurred in the smallest firms, and the FLL rate decreased as construction firm size increased. Discussion and Practical Applications: STF rates declined over time, yet remain common, requiring prevention activities. Safety professionals should focus on contributing factors when developing prevention strategies, especially high-risk subsectors and small firms.

The effect of wear on slip-resistance of winter footwear with composite outsoles: A pilot study

Falls on icy surfaces are among the top causes of injuries for workers exposed to the outdoor environment. Our recent field study showed that a new generation of winter footwear incorporating composite outsoles was able to reduce slips and falls on icy surfaces by 68% and 78%, respectively. The widespread adoption of this type of footwear may lead to substantial reductions in pain, suffering and costs of fall-related injuries. However, these composite materials are sensitive to wear and abrasion, which makes it likely that their slip-resistance performance may degrade with use. The goal of this pilot study was to determine the extent to which the slip-resistance of two types of winter footwear with composite outsoles changed as they wore down with real-world use. Seven participants were recruited for this study and were asked to walk 100K steps with their assigned footwear. Tread depth and slip-resistance performance (using the Maximum Achievable Angle test) were measured at baseline and again after each 25K-step interval up to 100K. Our results showed that the slip-resistance performance of the test footwear dropped significantly after the 75K and 100K step intervals compared to baseline. In addition, significant changes in tread depth were found after only 25K steps. These findings indicate that the performance of this type of footwear degrades relatively quickly with real-world use. Therefore, larger scale study of the slip-resistance of winter footwear with composite outsoles is needed and members of the public should be made aware of the potential loss of slip-resistance of these products.

Identifying lower limb problems and the types of safety footwear worn in the Australian wine industry: a cross-sectional survey

BACKGROUND

The Australian wine industry is a valuable part of the wider Australian economy worth approximately A$45 billion annually and employs 163,790 people either full time or part time. Australian agricultural industries are amongst the nation's most dangerous workplaces with joint, ligament, muscle and tendon injuries being commonplace along with wounds, lacerations and musculoskeletal diseases. It is therefore important to try and minimise the risk of injuries to workers. The aims of this study were to (1) identify whether lower limb problems occur in the Australian wine industry and (2) identify the types of safety footwear worn.

METHODS

Participants were recruited from the Australian wine industry. The study was a cross-sectional anonymous survey of 82 questions with n = 207 respondents. Questions related to job role performed, types of lower limb problems experienced, level of pain, restriction of activities, types of footwear worn, general health and physical health.

RESULTS

The main working roles were winery (73.4%), vineyard (52.2%), laboratory (39.6%), cellar door (32.4%) and office (8.2%), with 63.3% of participants working in more than one role. Lower back pain was the most commonly reported problem at 56% followed by foot pain (36.7%), knee pain (24.6%), leg pain (21.3%), ankle pain (17.9%), hip pain (15.5%), toe pain (13%) and heel pain (11.1%). The most popular footwear used by participants were elastic sided safety boots, followed by high cut lace up safety boots with side zip. Overall, although the pain experienced was moderate, it did not impact the workers ability to perform their duties and the majority self-reported as being in very good general and physical health.

CONCLUSION

To date no data have been published on the types of lower limb problems or the types of safety footwear worn in the Australian wine industry. This study is the first to demonstrate that elastic sided safety boots were the most popular amongst respondents and that lower limb problems occur with workers. Therefore, further research into the safety footwear used in the Australian wine industry is needed to better support workers health while working in their varied roles and conditions.

Safety footwear: A survey of end-users

This paper presents the results of an extensive survey concerning the experience of safety footwear end-users. Safety footwear has been in widespread use across many industries worldwide since the 1970s, and has become an essential part of industrial Personal Protective Equipment. The number of women entering predominantly male industrial environments, and requiring safety footwear is rising, and this is accompanied by anecdotal reports of ill-fitting and uncomfortable footwear. This research proactively compares the opinions of women and men regarding their experience of safety footwear. A systematically designed survey aims to substantiate previously anecdotal knowledge around safety footwear, including key drivers for end-user purchases, wear habits and comfort issues (establishing any differences between women and men). Chi-squared testing was used to assess statistical significance and ensure robustness of findings. The responses and resulting analysis confirmed that comfort and fit were key drivers for all end users; women and men have different wear habits (women wear their safety footwear less frequently and for shorter periods of time than men - likely due to the reported comfort issues); a significant proportion of women (60%) found their safety footwear less comfortable than their regular footwear, however, 45% of men also reported the same, which has not been reported anecdotally. In general, the users of safety footwear accepted a level of discomfort in at least one area of the foot before deeming footwear 'uncomfortable'. The significant analysis performed on the captured data has, to the authors knowledge, never before been undertaken for this breadth of industry, age and gender with 632 responses received. This makes it the largest study of this field to date.