Effects of adhesives and permeation enhancers on the skin permeation of captopril

Chitosan-Coated 5-Fluorouracil Incorporated Emulsions as Transdermal Drug Delivery Matrices

The purpose of the present study was to develop emulsions encapsulated by chitosan on the outer surface of a nano droplet containing 5-fluorouracil (5-FU) as a model drug. The emulsions were characterized in terms of size, pH and viscosity and were evaluated for their physicochemical properties such as drug release and skin permeation in vitro. The emulsions containing tween 80 (T80), sodium lauryl sulfate, span 20, and a combination of polyethylene glycol (PEG) and T20 exhibited a release of 88%, 86%, 90% and 92%, respectively. Chitosan-modified emulsions considerably controlled the release of 5-FU compared to a 5-FU solution (p < 0.05). All the formulations enabled transportation of 5-FU through a rat's skin. The combination (T80, PEG) formulation showed a good penetration profile. Different surfactants showed variable degrees of skin drug retention. The ATR-FTIR spectrograms revealed that the emulsions mainly affected the fluidization of lipids and proteins of the stratum corneum (SC) that lead to enhanced drug permeation and retention across the skin. The present study concludes that the emulsions containing a combination of surfactants (Tween) and a co-surfactant (PEG) exhibited the best penetration profile, prevented the premature release of drugs from the nano droplet, enhanced the permeation and the retention of the drug across the skin and had great potential for transdermal drug delivery. Therefore, chitosan-coated 5-FU emulsions represent an excellent possibility to deliver a model drug as a transdermal delivery system.

Enhanced Skin Permeation of Estradiol by Dimethyl Sulfoxide Containing Transdermal Patches

Dimethyl sulfoxide is a well-known and widely used dermal penetration enhancer. Its incorporation in transdermal patches would be highly desirable; however, due to its volatility this is extremely challenging. Here, we report on the feasibility of a dimethyl sulfoxide (DMSO) containing transdermal system containing estradiol as a model compound. Transdermal patches were prepared from duro-tak® 387-2510 containing various DMSO concentrations at different drying temperatures. The resulting patches were analyzed for DMSO content, estradiol and DMSO release, estradiol and DMSO permeation through excised porcine skin, and recrystallization during stability testing. Drying conditions in the range of 35° to 40° allowed a complete polymer solvents removal while retaining significant amounts of DMSO (≤10 mg/patch). Estradiol skin permeation increased 4-fold (Jss = 4.12 µg/cm-2·h-1) compared to DMSO-negative control (Jss = 1.1 ± 0.2 µg/cm-2·h-1). As additional benefit, estradiol recrystallization was inhibited by DMSO at even lowest solvent concentrations. Storage stability was limited to 6 months at 25 °C with a surprising discrepancy between DMSO content (significantly lower) and flux (not significantly different). Although the technical feasibility range is relatively narrow, such DMSO-containing matrix-type patches are able to significantly enhance drug permeation through the skin while ameliorating the product stability against recrystallization.

Effect of Different Pressure-Sensitive Adhesives on Performance Parameters of Matrix-Type Transdermal Delivery Systems

Matrix-type transdermal delivery systems (TDS) are comprised of the drug dissolved or dispersed in a pressure-sensitive adhesive (PSA) matrix and are designed to provide a controlled delivery through the skin and into systemic circulation. PSAs can directly affect the permeation, release, and performance characteristics of the system. In this study we aimed to design and characterize transdermal delivery systems formulated with lidocaine-as the model drug-loaded in different PSAs, including silicone, polyisobutylene (PIB), and acrylate. TDS containing lidocaine at its saturation points were prepared by the solvent casting method. In vitro permeation studies across dermatomed porcine ear skin were performed using Franz diffusion cells. In vitro release studies were carried out using USP apparatus 5 (paddle over disk). The cumulative amount permeated from the acrylate was significantly higher than silicone and PIB. The acrylate TDS contained a ten times higher drug amount than silicone TDS, but the permeation flux was only two folds higher. Results also showed the release of drug does not linearly correlate to saturation, as the silicone TDS comprising of the lowest amount of drug loading, showed the highest percentage release indicating the choice of PSA affected the drug release and permeation profile.

Simplified stratum corneum model membranes for studying the effects of permeation enhancers

The activity of transdermal permeation enhancers is usually evaluated in vitro on human or animal skin, but skin samples can be hard to source and highly variable. To provide a more consistent basis for evaluating the activity of permeation enhancers, we prepared relatively simple and inexpensive artificial membranes that imitate the stratum corneum (SC) lipid matrix. Our membranes were composed of stearic acid, cholesterol, cholesterol sulfate and a ceramide (CER) component consisting of N-2-hydroxystearoyl phytosphingosine (CER[AP]) and/or N-stearoyl phytosphingosine (CER[NP]). First, the permeation of theophylline (TH) and indomethacin (IND) through these membranes was compared with their permeation through porcine skin. Because the mixed CER[AP]/[NP] membrane gave the closest results to skin, this membrane was then used to test the effects of two permeation enhancers: N-dodecyl azepan-2-one (Azone) and (S)-N-acetylproline dodecyl ester (L-Pro2). Both enhancers significantly increased the flux of TH and IND through the skin and, even more markedly, through the lipid membrane, L-Pro2 having a stronger effect than Azone. Thus, our simplified model of the SC lipid membrane based on phytosphingosine CERs appears to be suitable for mimicking skin permeation.

Transdermal delivery of angiotensin II receptor blockers (ARBs), angiotensin-converting enzyme inhibitors (ACEIs) and others for management of hypertension

CONTEXT

Angiotensin II receptor blockers (ARBs), angiotensin-converting enzyme inhibitors (ACEIs) are some of the most commonly prescribed medications for hypertension.

OBJECTIVE

Most of all conventional dosage forms of ARBs and ACEIs undergo extensive first-pass metabolism, which significantly reduces bioavailability. Majority of ARBs and ACEIs are inherently short acting due to a rapid elimination half-life. In addition, oral dosage forms of ARBs and ACEIs have many high incidences of adverse effects due to variable absorption profiles, higher frequency of administration and poor patient compliance.

METHODS

Many attempts have been made globally at the laboratory level to investigate the skin permeation and to develop transdermal therapeutic systems of various ARBs, ACEIs and other anti-hypertensives, to circumvent the drawbacks associated with their conventional dosage form.

RESULTS

This manuscript presents an outline of the transdermal research specifically in the area of ARBs, ACEIs and other anti-hypertensives reported in various pharmaceutical journals.

CONCLUSION

The transdermal delivery has gained a significant importance for systemic treatment as it is able to avoid first-pass metabolism and major fluctuations of plasma levels typical of repeated oral administration. As we can experience from this review article that transdermal delivery of different ARBs and ACEIs improves bioavailability as well as patient compliance by many folds. In fact, the rationale development of some newer ARBs, ACEIs and other anti-hypertensives transdermal systems will provide new ways of treatment, circumventing current limitations for conventional dosage forms.

Transdermal delivery of Angiotensin Converting Enzyme inhibitors

The Angiotensin Converting Enzyme (ACE) inhibitor class of drugs has been in clinical use since the 1970s for the management of all grades of heart failure, hypertension, diabetic nephropathy and prophylaxis of cardiovascular events. Because of the advantages associated with transdermal delivery compared with oral delivery many researchers have investigated the skin as a portal for administration of ACE inhibitors. This review summarises the various studies reported in the literature describing the development and evaluation of transdermal formulations of ACE inhibitors. Captopril, enalapril maleate, lisinopril dihydrate, perindopril erbumine and trandolapril are the most studied in connection with transdermal preparations. The methodologies reported are considered critically and the limitations of the various skin models used are also highlighted. Finally, opportunities for novel transdermal preparations of ACE inhibitor drugs are discussed with an emphasis on rational formulation design.

Design, synthesis of novel lipids as chemical permeation enhancers and development of nanoparticle system for transdermal drug delivery

In the present study, we designed and developed novel lipids that include (Z)-1-(Octadec-9-en-1-yl)-pyrrolidine (Cy5T), 1, 1-Di-((Z)-octadec-9-en-1-yl)pyrrolidin-1-ium iodide (Cy5), (Z)-1-(Octadec-9-en-1-yl)-piperidine (Cy6T), and 1, 1-Di-((Z)-octadec-9-en-1-yl) piperidin-1-ium iodide (Cy6) to enhance the transdermal permeation of some selected drugs. Firstly, we evaluated the transdermal permeation efficacies of these lipids as chemical permeation enhancers in vehicle formulations for melatonin, ß-estradiol, caffeine, α-MSH, and spantide using franz diffusion cells. Among them Cy5 lipid was determined to be the most efficient by increasing the transdermal permeation of melatonin, ß-estradiol, caffeine, α-MSH, and spantide by 1.5 to 3.26-fold more at the epidermal layer and 1.3 to 2.5-fold more at the dermal layer, in comparison to either NMP or OA. Hence we developed a nanoparticle system (cy5 lipid ethanol drug nanoparticles) to evaluate any further improvement in the drug penetration. Cy5 lipid formed uniformly sized nanoparticles ranging from 150–200 nm depending on the type of drug. Further, Cy5 based nanoparticle system significantly (p<0.05) increased the permeation of all the drugs in comparison to the lipid solution and standard permeation enhancers. There were about 1.54 to 22-fold more of drug retained in the dermis for the Cy5 based nanoparticles compared to OA/NMP standard enhancers and 3.87 to 66.67-fold more than lipid solution. In addition, epifluorescent microscopic analysis in rhodamine-PE permeation studies confirmed the superior permeation enhancement of LEDs (detection of fluorescence up to skin depth of 340 μm) more than lipid solution, which revealed fluorescence up to skin depth of only 260 μm. In summary the present findings demonstrate that i) cationic lipid with 5 membered amine heterocyclic ring has higher permeating efficacy than the 6 membered amine hertocyclic ring. ii) The nanoparticle system prepared with Cy5 showed significant (p<0.05) increase in the permeation of the drugs than the control penetration enhancers, oleic acid and NMP.

Systemic delivery of antihypertensive drugs via skin

Hypertension is a chronic disease with one of the highest chances of causing death, and long-term treatment is required. The antihypertensive drugs used in the treatment are generally administered orally. The limitations of the oral route make transdermal delivery of drugs more attractive. The transdermal route offers numerous advantages including avoidance of systemic first-pass metabolism and high patient compliance. The transdermal therapeutic systems, popularly known as ‘patches’, deliver drugs across the skin with a constant release rate. However, skin is a unique membrane having excellent barrier properties. Either chemical enhancers or physical methods such as iontophoresis and electroporation have been used to provide effective plasma drug concentrations. This review article focuses on the approaches to enhance skin permeability of antihypertensive drugs for the optimization of transdermal therapeutic systems of these drugs and the research studies intended for the optimization of transdermal dosage forms of antihypertensive drugs are summarized.

Penetration enhancers

One long-standing approach for improving transdermal drug delivery uses penetration enhancers (also called sorption promoters or accelerants) which penetrate into skin to reversibly decrease the barrier resistance. Numerous compounds have been evaluated for penetration enhancing activity, including sulphoxides (such as dimethylsulphoxide, DMSO), Azones (e.g. laurocapram), pyrrolidones (for example 2-pyrrolidone, 2P), alcohols and alkanols (ethanol, or decanol), glycols (for example propylene glycol, PG, a common excipient in topically applied dosage forms), surfactants (also common in dosage forms) and terpenes. Many potential sites and modes of action have been identified for skin penetration enhancers; the intercellular lipid matrix in which the accelerants may disrupt the packing motif, the intracellular keratin domains or through increasing drug partitioning into the tissue by acting as a solvent for the permeant within the membrane. Further potential mechanisms of action, for example with the enhancers acting on desmosomal connections between corneocytes or altering metabolic activity within the skin, or exerting an influence on the thermodynamic activity/solubility of the drug in its vehicle are also feasible, and are also considered in this review.