A colorimetric aptasensor based on gold nanoparticles for detection of microbial toxins: an alternative approach to conventional methods

Frequent contamination of foods with microbial toxins produced by microorganisms such as bacteria, fungi, and algae represents an increasing public health problem that requires the development of quick and easy tools to detect them at trace levels. Recently, it has been found that colorimetric detection methods may replace traditional methods in the field because of their ease of use, quick response, ease of manufacture, low cost, and naked-eye visibility. Therefore, it is suitable for fieldwork, especially for work in remote areas of the world. However, the development of colorimetric detection methods with low detection limits is a challenge that limits their wide applicability in the detection of food contaminants. To address these challenges, nanomaterial-based transduction systems are used to construct colorimetric biosensors. For example, gold nanoparticles (AuNPs) provide an excellent platform for the development of colorimetric biosensors because they offer the advantages of easy synthesis, biocompatibility, advanced surface functionality, and adjustable physicochemical properties. The selectivity of the colorimetric biosensor can be achieved by the combination of aptamers and gold nanoparticles, which provides an unprecedented opportunity to detect microbial toxins. Compared to antibodies, aptamers have significant advantages in the analysis of microbial toxins due to their smaller size, higher binding affinity, reproducible chemical synthesis and modification, stability, and specificity. Two colorimetric mechanisms for the detection of microbial toxins based on AuNPs have been described. First, sensors that use the localized surface plasmon resonance (LSPR) phenomenon of gold nanoparticles can exhibit very strong colors in the visible range because of changes caused by aggregation or disaggregation. Second, the detection mechanism of AuNPs is based on their enzyme mimetic properties and it is possible to construct a colorimetric biosensor based on the 3,3',5,5'-tetramethylbenzidine/Hydrogen peroxide, TMB/H₂O₂ reaction to detect microbial toxins. Therefore, this review summarizes the recent applications of AuNP-based colorimetric aptasensors for detecting microbial toxins, including bacterial toxins, fungal toxins, and algal toxins focusing on selectivity, sensitivity, and practicality. Finally, the most important current challenges in this field and future research opportunities are discussed.

Residual Analysis of Aflatoxins in Spice by HPLC Coupled with Solid-Phase Dispersive Extraction and Solid-Phase Fluorescence Derivatization Method

BACKGROUND

Aflatoxins (AFs) are carcinogenic mycotoxins. A simple, quick, and accurate method for the micro-analysis of AFs in foodstuffs, especially spices, is needed.

OBJECTIVE

A sophisticated pretreatment method that combines solid-phase dispersive extraction (SPDE) and solid-phase fluorescence derivatization using immunoaffinity (IA) gel as the solid phase was developed to analyze AFs in spices simply, quickly, and sensitively by liquid chromatography with fluorescence detection.

METHOD

White and black pepper samples were extracted with a mixed solution of methanol/water (4:1) and then diluted with 7% aqueous solution of Triton-X. The solution was subjected to cleanup by SPDE using IA gel. Trifluoroacetic acid was added to the IA gel for on-site solid-phase fluorescence derivatization.

RESULTS

Chromatograms containing well-separated peaks and few interference peaks from contaminants were obtained. The method detection limit of AFs in white and black pepper was 0.15-0.29 ng/g. Repeatability and intermediate precision were <10% and <15%, respectively, and accuracy was 61.7-87.8%. In addition, inter-laboratory precision was <29% and mean recovery was 61.5-76.7%. A favorable z-score of |Z| ≦ 1 was obtained in seven laboratories, although one laboratory gave 2 < |Z| < 3.

CONCLUSIONS

The validity, reliability, practicality, and robustness of the developed method were verified.

HIGHLIGHTS

By using SPDE and solid-phase fluorescence derivatization in combination for AF analysis, fluorescence derivatization during cleanup was realized, leading to simplification of the pretreatment operation.

HPLC-MS/MS Method for the Detection of Selected Toxic Metabolites Produced by Penicillium spp. in Nuts

Penicillium spp. are emerging as producers of mycotoxins and other toxic metabolites in nuts. A HPLC-MS/MS method was developed to detect 19 metabolites produced by Penicillium spp. on chestnuts, hazelnuts, walnuts and almonds. Two extraction methods were developed, one for chestnuts and one for the other three nuts. The recovery, LOD, LOQ and matrix effect were determined for each analyte and matrix. Correlation coefficients were always >99.99%. In walnuts, a strong signal suppression was observed for most analytes and patulin could not be detected. Six strains: Penicillium bialowiezense, P. brevicompactum, P. crustosum, P. expansum, P. glabrum and P. solitum, isolated from chestnuts, were inoculated on four nuts. Chestnuts favored the production of the largest number of Penicillium toxic metabolites. The method was used for the analysis of 41 commercial samples: 71% showed to be contaminated by Penicillium-toxins. Cyclopenin and cyclopenol were the most frequently detected metabolites, with an incidence of 32% and 68%, respectively. Due to the risk of contamination of nuts with Penicillium-toxins, future studies and legislation should consider a larger number of mycotoxins.

A Review of Current Methods for Analysis of Mycotoxins in Herbal Medicines

The presence of mycotoxins in herbal medicines is an established problem throughout the entire world. The sensitive and accurate analysis of mycotoxin in complicated matrices (e.g., herbs) typically involves challenging sample pretreatment procedures and an efficient detection instrument. However, although numerous reviews have been published regarding the occurrence of mycotoxins in herbal medicines, few of them provided a detailed summary of related analytical methods for mycotoxin determination. This review focuses on analytical techniques including sampling, extraction, cleanup, and detection for mycotoxin determination in herbal medicines established within the past ten years. Dedicated sections of this article address the significant developments in sample preparation, and highlight the importance of this procedure in the analytical technology. This review also summarizes conventional chromatographic techniques for mycotoxin qualification or quantitation, as well as recent studies regarding the development and application of screening assays such as enzyme-linked immunosorbent assays, lateral flow immunoassays, aptamer-based lateral flow assays, and cytometric bead arrays. The present work provides a good insight regarding the advanced research that has been done and closes with an indication of future demand for the emerging technologies.

Antiaflatoxigenic and Antimicrobial Activities of Schiff Bases of 2-Hydroxy-4-methoxybenzaldehyde, Cinnamaldehyde, and Similar Aldehydes

2-Hydroxy-4-methoxybenzaldehyde (HMBA) is a nontoxic phenolic flavor from dietary source Decalipus hamiltonii and Hemidesmus indicus. HMBA is an excellent antimicrobial agent with additional antiaflatoxigenic potency. On the other hand, cinnamaldehyde from cinnamon is a widely employed flavor with significant antiaflatoxigenic activity. We have attempted the enhancement of antiaflatoxigenic and antimicrobial properties of HMBA, cinnamaldehyde, and similar molecules via Schiff base formation accomplished from condensation reaction with amino sugar (d-glucamine). HMBA derived Schiff bases exhibited commendable antiaflatoxigenic activity at the concentration 0.1 mg/mL resulting in 9.6 ± 1.9% growth of Aspergillus flavus and subsequent 91.4 ± 3.9% reduction of aflatoxin B₁ with respect to control.