An algorithm for mapping the catheter tip position on a fluorograph to the three-dimensional position in magnetic resonance angiography volume data

An algorithm for tracking microcatheters in fluoroscopy

Currently, a large number of endovascular interventions are performed for treatment of intracranial aneurysms. For these treatments, correct positioning of microcatheter tips, microguide wire tips, or coils is essential. Techniques to detect such devices may facilitate endovascular interventions. In this paper, we describe an algorithm for tracking of microcatheter tips during fluoroscopically guided neuroendovascular interventions. A sequence of fluoroscopic images (1,024 x 1,024 x 12 bits) was acquired using a C-arm angiography system as a microcatheter was passed through a carotid phantom which was on top of a head phantom. The carotid phantom was a silicone cylinder containing a simulated vessel with the shape and curvatures of the internal carotid artery. The head phantom consisted of a human skull and tissue-equivalent material. To detect the microcatheter in a given fluoroscopic frame, a background image consisting of an average of the four previous frames is subtracted from the current frame, the resulting image is filtered using a matched filter, and the position of maximum intensity in the filtered image is taken as the catheter tip position in the current frame. The distance between the tracked position and the correct position (error distance) was measured in each of the fluoroscopic images. The mean and standard deviation of the error distance values were 0.277 mm (1.59 pixels) and 0.26 mm (1.5 pixels), respectively. The error distance was less than 3 pixels in the 93.0% frames. Although the algorithm intermittently failed to correctly detect the catheter, the algorithm recovered the catheter in subsequent frames.

Microcatheter tip enhancement in fluoroscopy: a comparison of techniques

We compared three techniques for enhancement of microcatheter tips in fluoroscopic images: conventional subtraction technique (CST); averaged image subtraction technique (AIST), which we have developed; and double average filtering (DAF) technique, which uses nonlinear background estimates. A pulsed fluoroscopic image sequence was obtained as a microcatheter was passed through a carotid phantom that was on top of a head phantom. The carotid phantom was a silicone cylinder containing a simulated vessel with the shape and curvatures of the internal carotid artery. The three techniques were applied to the images of the sequence, then the catheter tip was manually identified in each image, and 100 x 100 pixel images, centered at the indicated microcatheter tip positions, were extracted for the evaluations. The signal-to-noise ratio (SNR) was calculated in each of the extracted images from which the mean value of the SNR and its standard deviation (SD) were calculated for each technique. The mean values and the standard deviations were 4.36 (SD 3.40) for CST, 6.34 (SD 3.62) for AIST, and 3.55 (SD 1.27) for DAF. AIST had a higher SNR compared to CST in almost all frames. Although DAF yielded the smallest mean SNR value, it yielded the best SNR in those frames in which the microcatheter tip did not move between frames. We conclude that AIST provides the best SNR for a moving microcatheter tip and that DAF is optimal for a temporarily stationary microcatheter tip.

Tracking technique of a micro guide wire in sequential fluorograms

In this paper, we propose a tracking technique for a micro guide wire in a sequence of fluorograms. A technique in which the region-growing technique was embedded was developed. It gives the center line of a micro guide wire. A sequence of 1,024 x 1,024 x 16 bit fluorograms (111 frames) with a carotid phantom and head phantom was obtained with a CAS-8000V (Toshiba America Medical Systems, Inc., CA, USA) C-arm angiography system and a Hi-Torque Standard micro guide wire (Advanced Cardiovascular Systems, Inc., CA, USA). To evaluate the technique, we manually traced the guide wire in each sequence frame three times, and a "true" single-width micro guide wire was created from them. The number of pixels on the true guide wire and inside the two-pixel tolerance of the center line was counted in each fluorogram, and the percentage of that count based on the number of all pixels on the true guide wire was calculated as true positive (TP). In addition, the number of pixels on the center line and outside the two-pixel tolerance of the true guide wire was counted in each frame as false positive (FP). The tracking technique has a mean TP of 94.8% and a mean FP of 5.1 pixels/frame. Several frames have low TP and high FP, but the technique could continue to track the micro guide wire until the end of the sequence. We therefore concluded that we had developed an accurate automatic tracking technique for micro guide wires in fluoroscopic sequences.