Optically controlled thermal management on the nanometer length scale

Multi-temperature modeling of femtosecond laser pulse on metallic nanoparticles accounting for the temperature dependences of the parameters

This review considers the fundamental dynamical processes of metal nanoparticles during and after the impact of a femtosecond laser pulse on a nanoparticle, including the absorption of photons. Understanding the sequence of events after photon absorption and their timescales is important for many applications of nanoparticles. Various processes are discussed, starting with optical absorption by electrons, proceeding through the relaxation of the electrons due to electron–electron scattering and electron–phonon coupling, and ending with the dissipation of the nanoparticle energy into the environment. The goal is to consider the timescales, values, and temperature dependences of the electron heat capacity and the electron–phonon coupling parameter that describe these processes and how these dependences affect the electron energy relaxation. Two- and four-temperature models for describing electron–phonon relaxation are discussed. Significant emphasis is paid to the proposed analytical approach to modeling processes during the action of a femtosecond laser pulse on a metal nanoparticle. These consider the temperature dependences of the electron heat capacity and the electron–phonon coupling factor of the metal. The entire process is divided into four stages: (1) the heating of the electron system by a pulse, (2) electron thermalization, (3) electron–phonon energy exchange and the equalization of the temperature of the electrons with the lattice, and (4) cooling of the nanoparticle. There is an appropriate analytical description of each stage. The four-temperature model can estimate the parameters of the laser and nanoparticles needed for applications of femtosecond laser pulses and nanoparticles.

Light-to-heat conversion and heating of single nanoparticles, their assemblies, and the surrounding medium under laser pulses

This review presents a platform for the description of the thermal processes of laser–nanoparticle interactions and their applications.

Intentional formation of a protein corona on nanoparticles: Serum concentration affects protein corona mass, surface charge, and nanoparticle-cell interaction

The protein corona, which immediately is formed after contact of nanoparticles and biological systems, plays a crucial role for the biological fate of nanoparticles. In the here presented study we describe a strategy to control the amount of corona proteins which bind on particle surface and the impact of such a protein corona on particle-cell interactions. For corona formation, polyethyleneimine (PEI) coated magnetic nanoparticles (MNP) were incubated in a medium consisting of fetal calf serum (FCS) and cell culture medium. To modulate the amount of proteins bind to particles, the composition of the incubation medium was varied with regard to the FCS content. The protein corona mass was estimated and the size distribution of the participating proteins was determined by means of sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Additionally, the zeta potential of incubated particles was measured. Human blood-brain barrier-representing cell line HBMEC was used for in vitro incubation experiments. To investigate the consequences of the FCS dependent protein corona formation on the interaction of MNP and cells flow cytometry and laser scanning microscopy were used. Zeta potential as well as SDS-PAGE clearly reveal an increase in the amount of corona proteins on MNP with increasing amount of FCS in incubation medium. For MNP incubated with lower FCS concentrations especially medium-sized proteins of molecular weights between 30kDa and 100kDa could be found within the protein corona, whereas for MNP incubated within higher FCS concentrations the fraction of corona proteins of 30kDa and less increased. The presence of the protein corona reduces the interaction of PEI-coated MNP with HBMEC cells within a 30min-incubation.

Plasmonically enhanced electron escape from gold nanoparticles and their polarization-dependent excitation transfer along DNA nanowires

Here we show plasmon mediated excitation transfer along DNA nanowires over up to one micrometer. Apparently, an electron excitation is initiated by a femtosecond laser pulse that illuminates gold nanoparticles (AuNP) on double stranded DNA (dsDNA). The dependency of this excitation on laser wavelength and polarization are investigated. Excitation of the plasmon resonance of the AuNPs via one- and two-photon absorption at 520 and 1030 nm, respectively, was explored. We demonstrate an excitation transfer along dsDNA molecules at plasmon supported four-photon excitation of AuNP cluster or at laser field driven nanoparticle electron tunneling for an alignment of the attached dsDNA to the polarization of the electric field of the laser light. These results extend the previously observed plasmonically induced three-photon excitation transfer along DNA nanowires to another nanoparticle material (gold) and the adapted irradiation wavelengths.

Tuning of spectral and angular distribution of scattering from single gold nanoparticles by subwavelength interference layers

Localized surface plasmon resonance (LSPR) as the resonant oscillation of conduction electrons in metal nanostructures upon light irradiation is widely used for sensing as well as nanoscale manipulation. The spectral resonance band position can be controlled mainly by nanoparticle composition, size, and geometry and is slightly influenced by the local refractive index of the near-field environment. Here we introduce another approach for tuning, based on interference modulation of the light scattered by the nanostructure. Thereby, the incoming electric field is wavelength-dependent modulated in strength and direction by interference due to a subwavelength spacer layer between nanoparticle and a gold film. Hence, the wavelength of the scattering maximum is tuned with respect to the original nanoparticle LSPR. The scattering wavelength can be adjusted by a metallic mirror layer located 100-200 nm away from the nanoparticle, in contrast to near-field gap mode techniques that work at distances up to 50 nm in the nanoparticle environment. Thereby we demonstrate, for the first time at the single nanoparticle level, that dependent on the interference spacer layer thickness, different distributions of the scattered signal can be observed, such as bell-shaped or doughnut-shaped point spread functions (PSF). The tuning effect by interference is furthermore applied to anisotropic particles (dimers), which exhibit more than one resonance peak, and to particles which are moved from air into the polymeric spacer layer to study the influence of the distance to the gold film in combination with a change of the surrounding refractive index.

Plasmonic heating with near infrared resonance nanodot arrays for multiplexing optofluidic applications

In this work, we show local laser-induced heating in fluids with gold nanodot arrays prepared by electron-beam lithography that cover resonances in the near infrared spectral range from 750 nm to 880 nm.

Active shape-morphing elastomeric colloids in short-pitch cholesteric liquid crystals

Active elastomeric liquid crystal particles with initial cylindrical shapes are obtained by means of soft lithography and polymerization in a strong magnetic field. Gold nanocrystals infiltrated into these particles mediate energy transfer from laser light to heat, so that the inherent coupling between the temperature-dependent order and shape allows for dynamic morphing of these particles and well-controlled stable shapes. Continuous changes of particle shapes are followed by their spontaneous realignment and transformations of director structures in the surrounding cholesteric host, as well as locomotion in the case of a nonreciprocal shape morphing. These findings bridge the fields of liquid crystal solids and active colloids, may enable shape-controlled self-assembly of adaptive composites and light-driven micromachines, and can be understood by employing simple symmetry considerations along with electrostatic analogies.

Plasmonic coupling and long-range transfer of an excitation along a DNA nanowire

We demonstrate an excitation transfer along a fluorescently labeled dsDNA nanowire over a length of several micrometers. Launching of the excitation is done by exciting a localized surface plasmon mode of a 40 nm silver nanoparticle by 800 nm femtosecond laser pulses via two-photon absorption. The plasmonic mode is subsequently coupled or transformed to excitation in the nanowire in contact with the particle and propagated along it, inducing bleaching of the dyes on its way. In situ as well as ex situ fluorescence microscopy is utilized to observe the phenomenon. In addition, transfer of the excitation along the nanowire to another nanoparticle over a separation of 5.7 μm was clearly observed. The nature of the excitation coupling and transfer could not be fully resolved here, but injection of an electron into the DNA from the excited nanoparticle and subsequent coupled transfer of charge (Dexter) and delocalized exciton (Frenkel) is the most probable mechanism. However, a direct plasmonic or optical coupling and energy transfer along the nanowire cannot be totally ruled out either. By further studies the observed phenomenon could be utilized in novel molecular systems, providing a long-needed communication method between molecular devices.

Gold nanoparticles reduced in situ and dispersed in polymer thin films: optical and thermal properties

Optical and thermal activity of plasmon-active nanoparticles in transparent dielectric media is of growing interest in thermal therapies, photovoltaics and optoelectronic components in which localized surface plasmon resonance (LSPR) could play a significant role. This work compares a new method to embed gold nanoparticles (AuNPs) in dense, composite films with an extension of a previously introduced method. Microscopic and spectroscopic properties of the two films are related to thermal behavior induced via laser excitation of LSPR at 532 nm in the optically transparent dielectric. Gold nanoparticles were incorporated into effectively nonporous 680 μm thick polydimethylsiloxane (PDMS) films by (1) direct addition of organic-coated 16 nm nanoparticles; and (2) reduction of hydrogen tetrachloroaurate (TCA) into AuNPs. Power loss at LSPR excitation frequency and steady-state temperature maxima at 100 mW continuous laser irradiation showed corresponding increases with respect to the mass of gold introduced into the PDMS films by either method. Measured rates of temperature increase were higher for organic-coated NP, but higher gold content was achieved by reducing TCA, which resulted in larger overall temperature changes in reduced AuNP films.

Molecular plasmonics: light meets molecules at the nanoscale

Certain metal nanoparticles exhibit the effect of localized surface plasmon resonance when interacting with light, based on collective oscillations of their conduction electrons. The interaction of this effect with molecules is of great interest for a variety of research disciplines, both in optics and in the life sciences. This paper attempts to describe and structure this emerging field of molecular plasmonics, situated between the molecular world and plasmonic effects in metal nanostructures, and demonstrates the potential of these developments for a variety of applications.

Magnetic multicore nanoparticles for hyperthermia--influence of particle immobilization in tumour tissue on magnetic properties

When using magnetic nanoparticles as a heating source for magnetic particle hyperthermia it is of particular interest to know if the particles are free to move in the interstitial fluid or are fixed to the tumour tissue. The immobilization state determines the relaxation behaviour of the administered particles and thus their specific heating power. To investigate this behaviour, magnetic multicore nanoparticles were injected into experimentally grown tumours in mice and magnetic heating treatment was carried out in an alternating magnetic field (H = 25 kA m(-1), f = 400 kHz). The tested particles were well suited for magnetic heating treatment as they heated a tumour of about 100 mg by about 22 K within the first 60 s. Upon sacrifice, histological tumour examination showed that the particles form spots in the tissue with a mainly homogeneous particle distribution in these spots. The magnetic ex vivo characterization of the removed tumour tissue gave clear evidence for the immobilization of the particles in the tumour tissue because the particles in the tumour showed the same magnetic behaviour as immobilized particles. Therefore, the particles are not able to rotate and a temperature increase due to Brown relaxation can be neglected. To accurately estimate the heating potential of magnetic materials, the respective environments influencing the nanoparticle mobility status have to be taken into account.

Wavelength-selective addressing of visible and near-infrared plasmon resonances for SU8 nanolithography

We imprint plasmonic near field enhancements as nanoscale topography in SU8 photoresist using two-photon absorption from a spectrally filtered broadband supercontinuum light source. Imprinted patterns smaller than 50 nm across are obtained localized at positions of high local field enhancements in gold bow tie antennas, and gold split rings resonant in the visible and near-infrared. Enhanced exposure only occurs at wavelengths and polarizations that exactly match the plasmonic resonances. Hence our work demonstrates that wavelength selective addressing of hot spots for nanolithography using an inexpensive, low peak-power picosecond pulsed source is freely tunable throughout the visible and infrared to match any desired plasmon resonance.

Plasmonic nanofabrication by long-range excitation transfer via DNA nanowire

Driven by the demand for ongoing integration and increased complexity of today's microelectronic circuits, smaller and smaller structures need to be fabricated with a high throughput. In contrast to serial nanofabrication techniques, based, e.g., on electron beam or scanning probe methods, optical methods allow a parallel approach and thus a high throughput. However, they rarely reach the desired resolution. One example is plasmon lithography, which is limited by the utilized plasmonic metal structures. Here we show a new approach extending plasmonic lithography with the potential for a highly parallel nanofabrication with a higher level of complexity based on nanoantenna effects combined with molecular nanowires. Thereby femtosecond laser pulse light is converted by Ag nanoparticles into a high plasmonic excitation guided along attached DNA structures. An underlying poly(methyl methacrylate) (PMMA) layer acting as an electron-sensitive resist is so structured along the former DNA position. This apparently DNA-guided effect leads to nanometer grooves reaching even micrometers away from the excited nanoparticle, representing a novel effect of long-range excitation transfer along DNA nanowires.

Heat generation by optically and thermally interacting aggregates of gold nanoparticles under illumination

The generation of heat by clusters and arrays of gold nanoparticles under illumination is investigated theoretically. The nanoparticles are embedded in a homogeneous dielectric medium, and the finite thermal resistance at the interface between the nanoparticle and the medium is taken into account. An analytic solution is derived for the case of a single nanoparticle. The T-matrix method is used to calculate the energy absorption efficiency of groups of nanoparticles, taking into account their optical interactions. Heat transfer equations are developed that take into account thermal interactions between nanoparticles. The equations are solved numerically using the finite element software COMSOL. Periodic boundary conditions are applied to treat the thermal interactions between the nanoparticles for arrays of nanoparticles. Results are presented for illumination by a standard xenon flash lamp. The thermal resistance at the nanoparticle-medium interface is found to strongly influence the nanoparticle temperature, but to have negligible influence on the temperature of the dielectric medium after a few tens of nanoseconds of exposure to the flash lamp pulse. Optical interactions are found to be important if particle centres are separated by about twice the particle diameter or less. Thermal interactions between nanoparticles via the medium are found to be the dominant factor in determining the temperature increase in the dielectric medium. The maximum temperature increase is proportional to the volume fraction of the nanoparticles in the medium.

Computer modeling of the optical properties and heating of spherical gold and silica-gold nanoparticles for laser combined imaging and photothermal treatment

Recently, several groups of investigators (Anderson, Halas, Zharov, El-Sayed and their co-workers (Pitsillides et al 2003 Biophys. J. 84 4023-31, Zharov et al 2003 Appl. Phys. Lett. 83 4897-9, Zharov et al 2004 Proc. SPIE 5319 291-9, Loo et al 2005 Nano Lett. 5 709-11, Gobin et al 2007 Nano Lett. 7 1929-34, Fu et al 2008 Nanotechnology 19 045103, Huang et al 2006 J. Am. Chem. Soc. 128 2115-20, Jain et al 2006 J. Phys. Chem. B 110 7238-48, Jain et al 2007 Nano Today 2 18-29)) demonstrated, through pioneering results, the great potential of laser thermal therapy of cells and tissues conjugated with gold nanoparticles. It was also proposed to use combined diagnostics and therapy on the basis of nanoparticle selection for achievement of efficient contrast for laser imaging applications, as well as for photothermal therapy. However, the current understanding of the relationship between optical properties (absorption, backscattering) of nanoparticles, the efficiency of nanoparticle heating and the possibility to use them for combined imaging and therapy is limited. Here, we report the results of computer modeling of optical absorption and backscattering properties and laser heating of gold and silica-gold spherical nanoparticles for laser combined imaging and photothermal treatment of cells and tissues conjugated with nanoparticles. The efficiencies of nanoparticle heating and backscattering by nanoparticles, depending upon their radii, structure and optical properties of the metal, were investigated. This paper focuses on the analysis and determination of appropriate ranges of nanoparticle sizes for the purposes of laser combined imaging and photothermal treatment. The possibility to use spherical gold and silica-gold nanoparticles in determined ranges of radii for these purposes for laser wavelengths 532 and 800 nm is investigated.

Mechanisms of laser nanoparticle-based techniques for gene transfection-a calculation study

Cell plasma membranes can be transiently permeabilized to uptake exogenous molecules with high efficiency using a laser nanoparticle-based gene transfection technique. In combination with experimental results, a theoretical model is set up to calculate the temperature distribution and variance around the nanoparticles. This paper also provides a thorough discussion of the underlying mechanisms of cell permeabilization. We find that, rapid heating of the particles and the accompanying extreme temperature rise can lead to microbubble formation around laser-heated particles, which is the origin of photoacoustic effects and other nonlinear optical responses. This transient heat is also capable of causing protein denaturation through thermal inactivation and photochemistry. Furthermore, the dynamic mode that involves the overlapping of bubbles is presented. This mode can significantly increase the plasma membrane permeability of the cells without affecting their viability.