Specific heat and thermal conductivity measurements for anisotropic and random macroscopic composites of cobalt nanowires

Fabrication of a Thick Crystalline Al2O3 Coating with Insulation and High Thermal Conductivity via Anodic Oxidation and Subsequent Mic Arc Discharge Treatment

Amorphous Al2O3 coating with a thickness of 143 μm was firstly prepared by anodic oxidation, then the amorphous Al2O3 was transformed into crystalline Al2O3 through applying micro arc discharge. The crystal structure of the Al2O3 coatings was analyzed with an X-ray diffractometer. Results indicated that the coating consisted of amorphous and crystalline Al2O3. The microstructure of the coating was characterized by scanning electron microscopy, which showed that the coating had a compact structure. The thermal conductivity of the coating was 23.7 W/m·K, which is significantly higher than that of amorphous Al2O3 coating. The total and specific breakdown voltages of the coating were 3.85 kV and 26.92 kV/mm, which is suitable to apply for high power LED heat sink substrate.

The specific heat and effective thermal conductivity of composites containing single-wall and multi-wall carbon nanotubes

We present a study of the specific heat and effective thermal conductivity in anisotropic and randomly oriented multi-wall carbon nanotube (MWCNT) and randomly oriented single-wall carbon nanotube (SWCNT) composites from 300 to 400 K. Measurements on randomly oriented MWCNTs and SWCNTs were made by depositing a thin film of CNTs within a calorimetric cell. Anisotropic measurements were made on MWCNTs grown inside the highly ordered, densely packed nanochannels of anodic aluminum oxide. The specific heat of randomly oriented MWCNTs and SWCNTs showed similar behavior to the specific heat of bulk graphite powder. However, the specific heat of aligned MWCNTs is smaller and has weaker temperature dependence than that of the bulk above room temperature. The effective thermal conductivity of randomly oriented MWCNTs and SWCNTs is similar to that of powder graphite, exhibiting a maximum value near 364 K indicating the onset of phonon-phonon scattering. The effective thermal conductivity of the anisotropic MWCNTs increased smoothly with increasing temperature and is indicative of the one-dimensional nature of the heat flow.