One-step solvothermal synthesis of Fe3O4@C core-shell nanoparticles with tunable sizes

Efficient capture of U(VI) by magnetic Zr(IV)-ethylenediamine tetramethylene phosphonic acid inorganic-organic hybrid

The separation of magnetic adsorbents from aqueous solutions is made simple by using an external magnetic field. Herein, magnetic Zr(IV)-ethylenediamine tetramethylene phosphonic acid (EDTMPA) hybrids (MZrOP-x-T, x, and T were the different quality of Fe₃O₄@C and temperature in the synthesis process, respectively). A study was conducted on the uses of MZrOP-x-T in the capture of U(VI). The influences of pH, adsorption period, initial concentration, and temperature were all investigated. Furthermore, the desorption and reusability of the materials were explored. The optimal values of x and T were 0.2 g and 100 °C, respectively. At 298.15 K, the maximum adsorption capacity of MZrOP-0.2-100 was 330.30 mg·g^-1. The current research demonstrates that MZrOP-0.2-100 is a potentially effective material in removing U(VI) from radioactive solution.

Efficient removal of antibiotics from water resources is a public health priority: a critical assessment of the efficacy of some remediation strategies for antibiotics in water

This review discusses the fundamental principles and mechanism of antibiotic removal from water of some commonly applied treatment techniques including chlorination, ozonation, UV-irradiation, Fenton processes, photocatalysis, electrochemical-oxidation, plasma, biochar, anaerobicdigestion, activated carbon and nanomaterials. Some experimental shortfalls identified by researchers such as certain characteristics of degradation agent applied and the strategies explored to override the identified limitations are briefly discussed. Depending on interactions of a range of factors including the type of antibiotic compound, operational parameters applied such as pH, temperature and treatment time, among other factors, all reviewed techniques can eliminate or reduce the levels of antibiotic compounds in water to varying extents. Some of the reviewed techniques such as anaerobic digestion generally require longer treatment times (up to 360, 193 and 170 days, according to some studies), while others such as photocatalysis achieved degradation within short contact time (within a minimum of 30, but up to 60, 240, 300 and 1880 minutes, in some cases). For some treatment techniques such as ozonation and Fenton, it is apparent that subjecting compounds to longer treatment times may improve elimination efficiency, whereas for some other techniques such as nanotechnology, application of longer treatment time generally meant comparatively minimal elimination efficiency. Based on the findings of experimental studies summarized, it is apparent that operational parameters such as pH and treatment time, while critical, do not exert sole or primary influence on the elimination percentage(s) achieved. Elimination efficiency achieved rather seems to be due more to the force of a combination of several factors.

Magnetic solid-phase extraction based on zirconium-based metal-organic frameworks for simultaneous enantiomeric determination of eight chiral pesticides in water and fruit juices

A novel multi-residue method, magnetic solid-phase extraction combined with LC-MS/MS, was proposed for simultaneous enantiomeric determination of eight chiral pesticides in water and fruit juices. Fe₃O₄@C@UiO-66 was firstly used to extract and enrich pesticides, showing excellent adsorption capacity, which was proved by adsorption kinetic and thermodynamic experiments. Multiple extraction parameters were optimized by Plackett-Burman and Box-Behnken design. Under optimized conditions, good linearity (1.0-200 ng L^-1, R² ≥ 0.9953) for all analytes, detection limits (0.10 to 0.35 ng L^-1), quantitation limits (0.35 to 1.00 ng L^-1), recoveries (83.68-95.99%), and precision (intra-day RSD ≤ 7.06%, inter-day RSD ≤ 9.40%) were obtained, meeting the requirements of pesticides residues analysis. It is worth mentioning that eight chiral pesticides can be separated quickly within 19 min. The above results indicate that the proposed method with satisfactory sensitivity and accuracy has the potential for routine analysis of chiral pesticide residues in aqueous samples.

Continuous gas-phase synthesis of core-shell nanoparticles via surface segregation

Synthesis methods of highly functional core@shell nanoparticles with high throughput and high purity are in great demand for applications, including catalysis and optoelectronics. Traditionally chemical synthesis has been widely explored, but recently, gas-phase methods have attracted attention since such methods can provide a more flexible choice of materials and altogether avoid solvents. Here, we demonstrate that Cu@Ag core-shell nanoparticles with well-controlled size and compositional variance can be generated via surface segregation using spark ablation with an additional heating step, which is a continuous gas-phase process. The characterization of the nanoparticles reveals that the Cu-Ag agglomerates generated by spark ablation adopt core-shell or quasi-Janus structures depending on the compaction temperature used to transform the agglomerates into spherical particles. Molecular dynamics (MD) simulations verify that the structural evolution is caused by heat-induced surface segregation. With the incorporated heat treatment that acts as an annealing and equilibrium cooling step after the initial nucleation and growth processes in the spark ablation, the presented method is suitable for creating nanoparticles with both uniform size and composition and uniform bimetallic configuration. We confirm the compositional uniformity between particles by analyzing compositional variance of individual particles rather than presenting an ensemble-average of many particles. This gas-phase synthesis method can be employed for generating other bi- or multi-metallic nanoparticles with the predicted configuration of the structure from the surface energy and atomic size of the elements.

A two-step method for the synthesis of magnetic immobilized cellulase with outstanding thermal stability and reusability

The cellulase electrostatically adsorbed on the surface of Fe₃O₄@C magnetic nanoparticles was embedded with silica to form the immobilized cellulase. The stability and reusability were greatly improved, while the synthesis process was simple.

Efficient Mercury Removal at Ultralow Metal Concentrations by Cysteine Functionalized Carbon-Coated Magnetite

This work reports the preparation and utility of cysteine-functionalized carbon-coated Fe3O4 materials (Cys-C@Fe3O4) as efficient sorbents for remediation of Hg(II)-contaminated water. Efficient removal (90%) of Hg(II) from 1000 ppb aqueous solutions is possible, at very low Cys-C@Fe3O4 sorbent loadings (0.01 g sorbent per liter of Hg(II) solution). At low metal concentrations (5–100 ppb Hg(II)), where adsorption is typically slow, Hg(II) removal efficiencies of 94–99.4% were achievable, resulting in final Hg(II) levels of <1.0 ppb. From adsorption isotherms, the Hg(II) adsorption capacity for Cys-C@Fe3O4 is 94.33 mg g−1, around three times that of carbon-coated Fe3O4 material. The highest partition coefficient (PC) of 2312.5 mgg−1µM−1 was achieved at the initial Hg (II) concentration of 100 ppb, while significantly high PC values of 300 mgg−1µM−1 and above were also obtained in the ultralow concentration range (≤20 ppb). Cys-C@Fe3O4 exhibits excellent selectivity for Hg(II) when tested in the presence of Pb(II), Ni(II), and Cu(II) ions, is easily separable from aqueous media by application of an external magnet, and can be regenerated for three subsequent uses without compromising Hg(II) uptake. Derived from commercially available raw materials, it is highly possible to achieve large-scale production of the functional sorbent for practical applications.

Improved performance of immobilized laccase on Fe3O4@C-Cu2+ nanoparticles and its application for biodegradation of dyes

An effective strategy for enhancement of catalytic activity and stability of immobilized laccase via metal affinity adsorption on Fe₃O₄@C-Cu²⁺ nanoparticles was developed, which involved the fabrication of hydroxyl and carboxyl functionalized Fe₃O₄@C nanoparticles via a simple hydrothermal process and the subsequent chelation with Cu²⁺ for the immobilization of laccase under a mild condition. Our results revealed that the Fe₃O₄@C-Cu²⁺ nanoparticles possess a high loading amount of bovine serum albumin (BSA, 436 mg/g support) and laccase activity recovery of 82.3 % after immobilization. Laccase activity assays indicated that thermal and pH stabilities, and resistances to organic solvents and metal ions of the immobilized laccase were relatively higher than those of the free enzyme. The immobilized laccase maintained more than 61 % of its original activity after 10 consecutive reuses. Most importantly, the immobilized laccase possessed excellent degradation of diverse synthetic dyes. The degradation rates of malachite green (MG), brilliant green (BG), crystal violet (CV), azophloxine, Procion red MX-5B, and reactive blue 19 (RB19) was approximately 99, 93, 79, 88, 75 and 81 (%) in the first cycle. Even after 10 consecutive reuses, the removal efficiencies of the six dyes were found to be 94, 80, 71, 78, 60, and 65 (%), respectively.

Synergetic effects of thymoquinone-loaded porous PVPylated Fe3O4 nanostructures for efficient pH-dependent drug release and anticancer potential against triple-negative cancer cells

Porous iron oxide nanostructures have attracted increasing attention due to their potential biomedical applications as nanocarriers for cancer and many other therapies as well as minimal toxicity. Herbal anti-cancer agent thymoquinone loaded on Fe₃O₄ nanoparticles is envisaged to offer solution towards cancer treatment. The purpose of the present study was to investigate the efficacy of thymoquinone-loaded PVPylated Fe₃O₄ magnetic nanoparticles (TQ-PVP-Fe₃O₄ NPs) against triple-negative breast cancer (TNBC) cells. The porous PVPylated Fe₃O₄ NPs were prepared by a simple solvothermal process, whereas the thymoquinone drug was loaded via the nanoprecipitation method. Fourier transform infrared (FTIR) spectroscopic analysis confirmed the molecular drug loading, and surface morphological observation further confirmed this. The quantity of thymoquinone adsorbed onto the porous PVPylated Fe₃O₄ NPs was studied by thermogravimetric analysis (TGA). The positive surface charge of TQ-PVP-Fe₃O₄ NPs facilitates the interaction of the NPs with cancer (MDA-MB-231) cells to enhance the biological functions. In addition, the anticancer potential of NPs involving cytotoxicity, apoptosis induction, reactive oxygen species (ROS) generation, and changes in the mitochondrial membrane potential (ΔΨ _m) of TNBC cells was evaluated. TQ-PVP-Fe₃O₄ NP-treated cells effectively increased the ROS levels leading to cellular apoptosis. The study shows that the synthesized TQ-PVP-Fe₃O₄ NPs display pH-dependent drug release in the cellular environment to induce apoptosis-related cell death in TNBC cells. Hence, the prepared TQ-PVP-Fe₃O₄ NPs may be a suitable drug formulation for anticancer therapy.

Magnetic-activated carbon composites derived from iron sludge and biological sludge for sulfonamide antibiotic removal

Novel magnetic-activated carbon composites (MACs) were synthesized via coupling of a glucose-assisted hydrothermal pretreatment and subsequent thermal treatment using iron sludge and biological sludge. The adsorption properties of MACs for sulfonamide antibiotic removal from aqueous solution were investigated. Results revealed that the MACs had a high specific surface area with well-distributed magnetic nano-sized Fe₃O₄/Fe⁰ particles with a graphitic shell. This finding indicates that the ferric compounds in the iron sludge were not only converted into magnetic ferrite but also worked as activators for graphitization of the surrounding amorphous carbon. The pseudo-second-order kinetics and Langmuir models were shown to well fit sulfonamide antibiotic adsorption on the MACs. There was a high correlation between the k_l·q_m and physicochemical parameters of the sulfonamides. The three parameters are molecular polarizability, octanol-water partition coefficient, and solubility, respectively. The sulfonamide adsorption by the MACs was highly pH dependent. Hydrophobic interaction, π-π interaction, as well as electrostatic interaction, played dominant roles in the sulfonamide adsorption.

Fe3O4@C@OSO3H as an efficient, recyclable magnetic nanocatalyst in Pechmann condensation: green synthesis, characterization, and theoretical study

Novel sulfonated carbon-coated magnetic nanoparticles (SCCMNPs; Fe₃O₄@C@OSO₃H) were designed, synthesized, characterized, and applied as an efficient nanocatalyst for green synthesis of coumarin derivatives through Pechmann condensation. The Fe₃O₄@C@OSO₃H was manufactured through a simple and inexpensive two-step procedure and characterized by FTIR, EDX, XRD, SEM, TEM, DLS, VSM, and TGA techniques. It was identified as an efficient heterogeneous catalyst in the Pechmann condensation of phenol derivatives and β-ketoesters, leading to high-yield coumarin derivatives under solvent-free conditions. The Fe₃O₄@C@OSO₃H removed after reaction finishing point by an external magnet, and it was reused fifteen times at the same conditions. Besides, theoretical studies were carried out using B3LYP/6-311++G(d,p) to more consideration of the reaction mechanism. The study of the frontier molecular orbitals, NBO atomic charges, molecular electrostatic potential of reactants, as well as Pechmann condensation mechanism was known very useful in suitable reactant choice. The reaction was performed through the electrophilic attack, dehydration, and trans-esterification, respectively.

One-pot solvothermal synthesis of magnetic biochar from waste biomass: Formation mechanism and efficient adsorption of Cr(VI) in an aqueous solution

A facile one-pot solvothermal method was applied to synthesize a magnetic biochar composite (MB) using phoenix tree leaves-derived biochar as the carbon matrix. The structure of MB was optimized by varying the load ratio and particle size of Fe₃O₄ nanoparticles on biochar. Time-dependent structure and composition evolution of solid and liquid phases during heterogeneous solvothermal process were investigated to understand the formation mechanism of MB. Firstly, Fe²⁺/Fe³⁺ ions were coordinated by oxygen-containing groups on biochar and part of them were hydrolyzed to form iron hydroxides. Then, those iron-containing precursors were thermally decomposed and reduced to iron oxides; and finally Fe₃O₄ nanoparticles were generated. The MB had an adsorption capacity for Cr(VI) of 55.0 mg/g in an aqueous solution, which exceeds those of biochar (39.8 mg/g) and Fe₃O₄ nanoparticles (26.5 mg/g). The adsorption mechanism study reveals that biochar as a carbon skeleton mainly provided binding sites for Cr(VI) and electron-donor groups for reduction of Cr(VI), while Fe₃O₄ nanoparticles mainly involved in the immobilization of newly formed Cr(III) through formation of Fe(III)-Cr(III) hydroxide. MB exhibited a stable structure with a lower Fe leakage at pH 2.0 than that of a comparable magnetic biochar sample prepared by conventional co-precipitation method. Recycling experiments suggested that MB could keep 84% of its initial removal capability for Cr(VI) even after seven cycles. The results indicate that solvothermal method is a promising alternative to prepare magnetic biochar for adsorption of heavy metal-containing wastewater.

Morphology-controlled synthesis of boehmite with enhanced efficiency for the removal of aqueous Cr(VI) and nitrates

Boehmite with different morphologies was synthesized using a simple hydrothermal method for the removal of Cr(VI) and nitrates from polluted water. When the pH of the hydrothermal system was changed, the final crystallization products had morphologies of one-dimensional rods or two-dimensional sheets with different sizes. The boehmites were characterized and used for the adsorption of aqueous Cr(VI) and nitrates. Their bulk structure and surface properties significantly changed with the corresponding morphology, which prominently affected their adsorption capacity. Boehmite with a 2D small sheet-like structure showed the highest adsorption capacity (64.7 mg g^-1). Moreover, the small sheet-like boehmite showed a remarkable adsorption capacity towards nitrates (74.5-378.5 mg g^-1) and maintained a high selectivity to Cr(VI) in the presence of competing anions such as NO₃ ^-, [Formula: see text] and Cl^-. The isotherms for Cr(VI) sorption could be better explained using the Langmuir model, indicating a monolayer adsorption of the Cr species, while the isotherms for nitrate sorption followed the Freundlich model, suggesting a multilayer adsorption. The active adsorption sites of boehmite were found to be the Lewis acid sites and surface hydroxyl groups according to the outcomes of the analysis using a series of characterization methods such as IR, Raman and x-ray photoelectron spectra. The unique structure of boehmite is beneficial to adsorb anion containments while maintaining a high selectivity to Cr(VI) species. Because of the multiple Lewis or Brönsted acid sites in boehmite, the Cr(VI) was reduced to less toxic Cr(III) species and immobilized on the surface of boehmite. In consideration of the low-cost and good regeneration capacity, the small sheet-like boehmite would be useful for the removal of anions present in polluted water.

Prussian blue-encapsulated Fe3O4 nanoparticles for reusable photothermal sterilization of water

Waterborne health issues continue to grow despite the large number of available solutions. Current sterilization techniques to fight with waterborne diseases struggle to meet the demands on cost, efficiency and reach. Effective alternatives are pressingly required. Here we introduce Prussian blue coated ferroferric oxide (Fe₃O₄@PB) composites for water sterilization. The composites exhibit superior photothermal inactivation of bacteria under solar-light irradiation, with nearly complete inactivation of bacterial cells in only 15 min. Even for the mixed bacteria in authentic water matrices, the composites show excellent bacterial inactivation performance. Moreover, the highly magnetized iron core of the Fe₃O₄@PB enables magnetic separation and recycling. Multiple cycle runs reveal that Fe₃O₄@PB composites have exceptional stability and reusability. This work demonstrates a scalable, low-cost, high-efficiency and reusable sterilization method to improve water quality and safety.

A novel method to prepare a magnetic carbon-based adsorbent with sugar-containing water as the carbon source and DETA as the modifying reagent

A novel magnetic heavy metal adsorbent was prepared via diethylenetriamine (DETA) modification on magnetic hydrothermal carbon, with glucose and sugar-containing waste water as the carbon source. The prepared materials were characterized by FT-IR, SEM, TEM, EDXRF, TGA, elemental analysis, XPS, and magnetic moment determination. In this paper, the adsorption mechanism of the modified and unmodified adsorbents was well discussed. Four kinds of waste water (watermelon juice, expired sprite, sugar-pressing waste water, and confectionary waste water) were employed to produce heavy metal ion adsorbents; the chemical properties of hydrothermal carbon derived from the proposed sources were analyzed as well. The maximum uptake capacity for Cu²⁺, Pb²⁺, and Cd²⁺ of the adsorbent produced from glucose was 26.88, 103.09, and 25.38 mg g^-1, respectively. After 5 cycles, the adsorption ability was still well preserved. This work represents an efficient new direction for the treatment of heavy metal ions in water and the reuse of sugar-containing waste water. Graphical abstract The schemetic of DETA-modified magnetic carbon preparing from sugar-containing wastewater.

Modification of a magnetic carbon composite for ciprofloxacin adsorption

A magnetic carbon composite, Fe₃O₄/C composite, was fabricated by one-step hydrothermal synthesis, modified by heat treatment under an inert atmosphere (N₂), and then used as an adsorbent for ciprofloxacin (CIP) removal. Conditions for the modification were optimized according to the rate of CIP removal. The adsorbent was characterized by Fourier transform infrared spectroscopy, X-ray diffraction measurements, vibrating-sample magnetometry, scanning electron microscopy, transmission electron microscopy, and N₂ adsorption/desorption isotherm measurements. The results indicate that the modified adsorbent has substantial magnetism and has a large specific area, which favor CIP adsorption. The effects of solution pH, adsorbent dose, contact time, initial CIP concentration, ion strength, humic acid and solution temperature on CIP removal were also studied. Our results show that all of the above factors influence CIP removal. The Langmuir adsorption isotherm fits the adsorption process well, with the pseudo second-order model describing the adsorption kinetics accurately. The thermodynamic parameters indicate that adsorption is mainly physical adsorption. Recycling experiments revealed that the behavior of adsorbent is maintained after recycling for five times. Overall, the modified magnetic carbon composite is an efficient adsorbent for wastewater treatment.

Facile Hydrothermal Synthesis of Fe3O4/C Core-Shell Nanorings for Efficient Low-Frequency Microwave Absorption

Using elliptical iron glycolate nanosheets as precursors, elliptical Fe3O4/C core-shell nanorings (NRs) [25 ± 10 nm in wall thickness, 150 ± 40 nm in length, and 1.6 ± 0.3 in long/short axis ratio] are synthesized via a one-pot hydrothermal route. The surface-poly(vinylpyrrolidone) (PVP)-protected-glucose reduction/carbonization/Ostwald ripening mechanism is responsible for Fe3O4/C NR formation. Increasing the glucose/precursor molar ratio can enhance carbon contents, causing a linear decrease in saturation magnetization (Ms) and coercivity (Hc). The Fe3O4/C NRs reveal enhanced low-frequency microwave absorption because of improvements to their permittivity and impedance matching. A maximum RL value of -55.68 dB at 3.44 GHz is achieved by Fe3O4/C NRs with 11.95 wt % C content at a volume fraction of 17 vol %. Reflection loss (RL) values (≤-20 dB) are observed at 2.11-10.99 and 16.5-17.26 GHz. Our research provides insights into the microwave absorption mechanism of elliptical Fe3O4/C core-shell NRs. Findings indicate that ring-like and core-shell nanostructures are promising structures for devising new and effective microwave absorbers.

Synthesis of Superparamagnetic Core-Shell Structure Supported Pd Nanocatalysts for Catalytic Nitrite Reduction with Enhanced Activity, No Detection of Undesirable Product of Ammonium, and Easy Magnetic Separation Capability

Superparamagnetic nanocatalysts could minimize both the external and internal mass transport limitations and neutralize OH(-) produced in the reaction more effectively to enhance the catalytic nitrite reduction efficiency with the depressed product selectivity to undesirable ammonium, while possess an easy magnetic separation capability. However, commonly used qusi-monodispersed superparamagnetic Fe3O4 nanosphere is not suitable as catalyst support for nitrite reduction because it could reduce the catalytic reaction efficiency and the product selectivity to N2, and the iron leakage could bring secondary contamination to the treated water. In this study, protective shells of SiO2, polymethylacrylic acid, and carbon were introduced to synthesize Fe3O4@SiO2/Pd, Fe3O4@PMAA/Pd, and Fe3O4@C/Pd catalysts for catalytic nitrite reduction. It was found that SiO2 shell could provide the complete protection to Fe3O4 nanosphere core among these shells. Because of its good dispersion, dense structure, and complete protection to Fe3O4, the Fe3O4@SiO2/Pd catalyst demonstrated the highest catalytic nitrite reduction activity without the detection of NH4(+) produced. Due to this unique structure, the activity of Fe3O4@SiO2/Pd catalysts for nitrite reduction was found to be independent of the Pd nanoparticle size or shape, and their product selectivity was independent of the Pd nanoparticle size, shape, and content. Furthermore, their superparamagnetic nature and high saturation magnetization allowed their easy magnetic separation from treated water, and they also demonstrated a good stability during the subsequent recycling experiment.

Recent advances in the synthesis and application of photocatalytic metal–metal oxide core–shell nanoparticles for environmental remediation and their recycling process

Metal–metal oxide core–shell nanoparticles have received enormous research attention owing to their fascinating physicochemical properties and extensive applications. In this review we have discussed the challenges and recent advances in their synthesis and application.

High-quality elliptical iron glycolate nanosheets: selective synthesis and chemical conversion into FexOy nanorings, porous nanosheets, and nanochains with enhanced visible-light photocatalytic activity

This paper describes an original and facile polyol-mediated solvothermal synthesis of elliptical iron glycolate nanosheets (IGNSs) combined with precursor thermal conversion into γ-Fe2O3 and α-Fe2O3/γ-Fe2O3 porous nanosheets (PNSs), α-Fe2O3 nanochains (NCs), and elliptical Fe3O4 nanorings (NRs). The IGNSs were produced via the oxidation-reduction and co-precipitation reactions in the presence of iron(III) salts, ethylene glycol, polyethylene glycol, and ethylenediamine. Control over Fe(3+) concentration, temperature, and time can considerably modulate the size and phase of the products. The IGNSs can be transformed to γ-Fe2O3 and α-Fe2O3/γ-Fe2O3 PNSs, α-Fe2O3 NCs, and elliptical Fe3O4 NRs by heat treatment under various annealing temperatures and ambiences. The PNSs and NCs exhibited high soft magnetic properties and coercivity, respectively. Visible-light photocatalytic activity toward RhB in the presence of H2O2 by PNSs and NCs was phase-, SBET, size-, porosity-, and local structure-dependent, following the order: α-Fe2O3 NCs > α-Fe2O3/γ-Fe2O3 PNSs > γ-Fe2O3 PNSs > IGNSs. In particular, α-Fe2O3/γ-Fe2O3 PNSs possessed significantly enhanced photocatalytic activity with good recyclability and could be conveniently separated by an applied magnetic field because of high magnetization. We believe that the as-prepared α-Fe2O3/γ-Fe2O3 PNSs have potential practical use in waste water treatment and microwave absorption.

Adsorption of Hg2+ by thiol functionalized hollow mesoporous silica microspheres with magnetic cores

Thiol functionalized hollow mesoporous silica spheres with magnetic cores were synthesized and found to be highly selective adsorbents of Hg²⁺.

Nanoscale Co-based catalysts for low-temperature CO oxidation

A novel MOF-derived metallic cobalt-based catalyst for low-temperature CO oxidation was developed. This catalyst exhibited high catalytic activity even at a temperature as low as −30 °C and improved tolerance of moisture as compared to other Co-based materials.

Growth-dissolution-regrowth transitions of Fe3O4 nanoparticles as building blocks for 3D magnetic nanoparticle clusters under hydrothermal conditions

Magnetic nanoparticle clusters (MNCs) are a class of secondary structural materials that comprise chemically defined nanoparticles assembled into clusters of defined size. Herein, MNCs are fabricated through a one-pot solvothermal reaction featuring self-limiting assembly of building blocks and the controlled reorganization process. Such growth-dissolution-regrowth fabrication mechanism overcomes some limitations of conventional solvothermal fabrication methods with regard to restricted available feature size and structural complexity, which can be extended to other oxides (as long as one can be chelated by EDTA-2Na). Based on this method, the nanoparticle size of MNCs is tuned between 6.8 and 31.2 nm at a fixed cluster diameter of 120 nm, wherein the critical size for superparamagnetic-ferromagnetic transition is estimated from 13.5 to 15.7 nm. Control over the nature and secondary structure of MNCs gives an excellent model system to understand the nanoparticle size-dependent magnetic properties of MNCs. MNCs have potential applications in many different areas, while this work evaluates their cytotoxicity and Pb(2+) adsorption capacity as initial application study.

Sea-urchin-like Fe3O4@C@Ag particles: an efficient SERS substrate for detection of organic pollutants

Ag-coated sea-urchin-like Fe3O4@C core-shell particles can be synthesized by a facile one-step solvothermal method, followed by deposition of high-density Ag nanoparticles onto the carbon surface through an in situ growth process, respectively. The as-synthesized Ag-coated Fe3O4@C particles can be used as a surface-enhanced Raman scattering (SERS) substrate holding reproducible properties under an external magnetic force. The magnetic function of the particles allows concentrating the composite particles into small spatial regions, which can be exploited to decrease the amount of material per analysis while improving its SERS detection limit. In contrast to the traditional SERS substrates, the present Fe3O4@C@Ag particles hold the advantages of enrichment of organic pollutants for improving SERS detection limit and recycled utilization.