Selective response inversion to NO₂ and acetic acid in ZnO and CdS nanocomposite gas sensor

Multipurpose sensing applications of biocompatible radish-derived carbon dots as Cu2+ and acetic acid vapor sensors

A recent trend in the preparation of carbon dots, optically unique nanomaterials, revolves around the use of readily-available, low-cost natural resources as precursors and their multipurpose applications. In this work, a hydrothermal method for preparing biocompatible carbon dots from radish was developed. The carbon dots were then tested for sensing of Cu²⁺ and acetic acid vapor. The carbon dots exhibited blue emission under UV illumination with, a quantum yield of 15%. The fluorescence emission was selectively quenched when Cu²⁺ ions were added, giving a detection limit of 0.16 μM. A paper-based fluorescent sensor was fabricated and shown to sense Cu²⁺ with a limit of detection of 6.8 μM. The carbon dots were able to determine the Cu²⁺ concentration in real water samples, with excellent recovery and reliability. The carbon dots were also used as the sensing material in an optical electronic nose, and tested for real-time detection of acetic acid vapor. Using principal component analysis, different ratios of acetic acid to methanol in solution were successfully identified with a detection limit of 15.5%. The acetic acid concentration in a real vinegar sample was also accurately determined. Our results demonstrated that label-free carbon dots derived from readily available radish can be simply used as versatile probes, giving them potential uses in multipurpose sensing applications.

Arrays of Ultrathin CdS Nanoflakes with High-Energy Surface for Efficient Gas Detection

It is fascinating and challenging to endow conventional materials with unprecedented properties. For instance, cadmium sulfide (CdS) is an important semiconductor with excellent light response; however, its potential in gas-sensing was underestimated owing to relatively low chemical activity and poor electrical conductivity. Herein, we demonstrate that an ideal architecture, ultrathin nanoflake arrays (NFAs), can improve significantly gas-sensing properties of CdS material. The CdS NFAs are grown directly on the interdigitated electrode to expose large surface area. Their thickness is reduced below the double Debye length of CdS, permitting to achieve a full depletion of carriers. Particularly, the prepared CdS nanoflakes are enclosed with high-energy {0001} facets exposed, which provides more active sites for gas adsorption. Moreover, the NFAs exhibit the light-trapping effect, which further enhances their gas sensitivity. As a result, the as-prepared CdS NFAs demonstrate excellent gas-sensing and light-response properties, thus being capable of dual gas and light detection.

A new method to integrate ZnO nano-tetrapods on MEMS micro-hotplates for large scale gas sensor production

A new method, which is easily scalable to large scale production, has been developed to obtain gas sensor devices based on zinc oxide (ZnO) nanostructures with a 'tetrapod' shape. The method can be easily extended to other kinds of nanostructures and is based on the deposition of ZnO nanostructures through polymeric masks by centrifugation, directly onto properly designed MEMS micro-hotplates. The micromachined devices, after the mask is peeled off, are ready for electrical bonding and sensing test. Sensor response has been successfully measured for some gases and volatile organic compounds with different chemical properties (ethanol, methane, nitrogen dioxide, hydrogen sulfide).

ZnO nanorod/porous silicon nanowire hybrid structures as highly-sensitive NO2 gas sensors at room temperature

The obtained hybrid structures (ZnO nanorod/porous silicon nanowires) could be applied as highly sensitive NO₂ gas sensors at room temperature.

Synthesis of ZnO nanosheet arrays with exposed (100) facets for gas sensing applications

ZnO nanosheet (NS) arrays have been synthesized by a facile ultrathin liquid layer electrodeposition method. The ion concentration and electrode potential play important roles in the formation of ZnO NS arrays. Studies on the structural information indicate that the NSs are exposed with (100) facets. The results of Raman and PL spectra indicate that there existed a large amount of oxygen vacancies in the NSs. The gas sensing performances of the ZnO NS arrays are investigated: the ZnO NS arrays exhibited high gas selectivity and quick response/recovery for detecting NO2 at a low working temperature. High binding energies between NO2 molecules and exposed ZnO(100) facets lead to large surface reconstructions, which is responsible for the intrinsic NO2 sensing properties. In addition, the highly exposed surface and a large amount of oxygen vacancies existing in the NSs also make a great contribution to the gas sensing performance.