Evolution of hollow nanostructures in hybrid Ce1-x Cu x O2 under droplet confinement leading to synergetic effects on the physical properties

Hierarchical cage-frame type nanostructure of CeO2 for bio sensing applications: from glucose to protein detection

Self-assembled hierarchical nanostructures are slowly superseding their conventional counterparts for use in biosensors. These morphologies show high surface area with tunable porosity and packing density. Modulating the interfacial interactions and subsequent particle assembly occurring at the water-and-oil interface in inverse miniemulsions, are amongst the best strategies to stabilize various type of hollow nanostructures. The paper presents a successful protocol to obtain CeO₂ hollow structures based biosensors that are useful for glucose to protein sensing. The fabricated glucose sensor is able to deliver high sensitivity (0.495 μA cm^-2 nM^-1), low detection limit (6.46 nM) and wide linear range (0 nM to 600 nM). CeO₂ based bioelectrode can also be considered as a suitable candidate for protein sensors. It can detect protein concentrations varying from 0 to 30 µM, which is similar or higher than most reports in the literature. The limit of detection (LOD) for protein was ∼0.04 µM. Therefore, the hollow CeO₂ electrodes, with excellent reproducibility, stability and repeatability, open a new area of application for cage-frame type particles.

Low-Temperature Miniemulsion-Based Routes for Synthesis of Metal Oxides

The use of miniemulsions containing chemical precursors in the disperse phase is a versatile method to produce nanoparticles and nanostructures of different chemical nature, including not only polymers, but also a variety of inorganic materials. This Minireview focuses on materials in which nanostructures of metal oxides are synthesized in processes that involve the miniemulsion technique in any of the steps. This includes in the first place those approaches in which the spaces provided by nanodroplets are directly used to confine precipitation reactions that lead eventually to oxides. On the other hand, miniemulsions can also be used to form functionalized polymer nanoparticles that can serve either as supports or as controlling agents for the synthesis of metal oxides. Herein, the description of essential aspects of the methods is combined with the most representative examples reported in the last years for each strategy.

Low-Temperature Solution Crystallization of Nanostructured Oxides and Thin Films

As an introduction to this themed issue, a critically selected overview of recent progress on the topic of solution methods for the low-temperature crystallization of nanoscale oxide materials is presented. It is focused on the low-temperature solution processing of oxide nanostructures and thin films. Benefits derived from these methods span from minimizing the environmental impact to reducing the fabrication costs. In addition, this topic is regarded as a key objective in the area because it offers a unique opportunity for the use of these materials in areas like flexible electronics, energy conversion and storage, environmental sciences, catalysis, or biomedicine.

Hollow Micro/Nanostructured Ceria-Based Materials: Synthetic Strategies and Versatile Applications

Hollow micro/nanostructured CeO₂ -based materials (HMNCMs) have triggered intensive attention as a result of their unique structural traits, which arise from their hollowness and the fascinating physicochemical properties of CeO₂ . This attention has led to widespread applications with improved performance. Herein, a comprehensive overview of methodologies applied for the synthesis of various hollow structures, such as hollow spheres, nanotubes, nanoboxes, and multishelled hollow spheres, is provided. The synthetic strategies toward CeO₂ hollow structures are classified into three major categories: 1) well-established template-assisted (hard-, soft-, and in situ template) methods; 2) newly emerging self-template approaches, including selective etching, Ostwald ripening, the Kirkendall effect, galvanic replacement, etc.; 3) bottom-up self-organized formation synthesis (namely, oriented attachment and self-deformation). Their underlying mechanisms are concisely described and discussed in detail, the differences and similarities of which are compared transversely and longitudinally. Niche applications of HMNCMs in a wide range of fields including catalysis, energy conversion and storage, sensors, absorbents, photoluminescence, and biomedicines are reviewed. Finally, an outlook of future opportunities and challenges in the synthesis and application of CeO₂ -based hollow structures is also presented.

Electronic Structure and Room Temperature Ferromagnetism in Gd-doped Cerium Oxide Nanoparticles for Hydrogen Generation via Photocatalytic Water Splitting

Enhanced visible light photocatalytic activity of Gd-doped CeO2 nanoparticles (NPs) is experimentally demonstrated, whereas there are very few reports on this mechanism with rare earth doping. All-pure and Gd-doped CeO2 NPs are synthesized using a coprecipitation method and characterized using X-ray diffraction (XRD), absorption spectroscopy, surface-enhanced Raman Spectroscopy (SERS), X-ray photoelectron spectroscopy (XPS), and superconducting quantum interference device (SQUID). The effect of Gd-doping on properties of CeO2 is discussed along with defects and oxygen vacancies generation. The XRD confirms the incorporation of Gd3+ at the Ce3+/Ce4+ site by keeping the crystal structure same. The average particle size from transmission electron microscopy (TEM) images is in the range of 5-7 nm. The XPS spectra of Ce 3d, O 1s, and Gd 4d exhibits the formation of oxygen vacancies to maintain the charge neutrality when Ce4+ changes to Ce3+. The gradual increase in hydrogen production is observed with increasing Gd concentration. The observed results are in good correlation with the characterization results and a mechanism of water splitting is proposed on the basis of analyses. The absorption spectra reveal optical band gap (2.5-2.7 eV) of samples, showing band gap narrowing leads to desired optical absorbance and photoactivity of NPs.

Cerium-Doped Copper(II) Oxide Hollow Nanostructures as Efficient and Tunable Sensors for Volatile Organic Compounds

Tuning sensing capabilities of simple to complex oxides for achieving enhanced sensitivity and selectivity toward the detection of toxic volatile organic compounds (VOCs) is extremely important and remains a challenge. In the present work, we report the synthesis of pristine and Ce-doped CuO hollow nanostructures, which have much higher VOC sensing and response characteristics than their solid analogues. Undoped CuO hollow nanostructures exhibit high response for sensing of acetone as compared to commercial CuO nanoparticles. As a result of doping with cerium, the material starts showing selectivity. CuO hollow structures doped with 5 at. % of Ce return highest response toward methanol sensing, whereas increasing the Ce doping concentration to 10%, the material shows high response for both-acetone and methanol. The observed tunability in selectivity is directly linked to the varying concentration of the oxygen defects on the surface of the nanostructures. The work also shows that the use of hollow nanostructures could be the way forward for obtaining high-performance sensors even by using conventional and simple metal or semiconductor oxides.

Hollow nanostructures of metal oxides as next generation electrode materials for supercapacitors

Hollow nanostructures of copper oxides help to stabilize appreciably higher electrochemical characteristics than their solid counter parts of various morphologies. The specific capacitance values, calculated using cyclic voltammetry (CV) and charge-discharge (CD) studies, are found to be much higher than the values reported in literature for copper oxide particles showing  intriguing morphologies or even composites with trendy systems like CNTs, rGO, graphene, etc. The proposed cost-effective synthesis route makes these materials industrially viable for application in alternative energy storage devices. The improved electrochemical response can be attributed to effective access to the higher number of redox sites that become available on the surface, as well as in the cavity of the hollow particles. The ion transport channels also facilitate efficient de-intercalation, which results in the enhancement of cyclability and Coulombic efficiency. The charge storage mechanism in copper oxide structures is also proposed in the paper.