Universal deformation pathways and flexural hardening of nanoscale 2D-material standing folds

Nanomechanics of few-layer materials: do individual layers slide upon folding?

Folds naturally appear on nanometrically thin materials, also called "2D materials", after exfoliation, eventually creating folded edges across the resulting flakes. We investigate the adhesion and flexural properties of single-layered and multilayered 2D materials upon folding in the present work. This is accomplished by measuring and modeling mechanical properties of folded edges, which allows for the experimental determination of the bending stiffness (κ) of multilayered 2D materials as a function of the number of layers (n). In the case of talc, we obtain κ ∝ n ³ for n ≥ 5, indicating no interlayer sliding upon folding, at least in this thickness range. In contrast, tip-enhanced Raman spectroscopy measurements on edges in folded graphene flakes, 14 layers thick, show no significant strain. This indicates that layers in graphene flakes, up to 5 nm thick, can still slip to relieve stress, showing the richness of the effect in 2D systems. The obtained interlayer adhesion energy for graphene (0.25 N/m) and talc (0.62 N/m) is in good agreement with recent experimental results and theoretical predictions. The obtained value for the adhesion energy of graphene on a silicon substrate is also in agreement with previous results.

Exfoliation and characterization of a two-dimensional serpentine-based material

We report on an experimental investigation of serpentine, an abundant phyllosilicate, as an alternative source of two-dimensional (2D) nanomaterials. We show, through scanning probe microscopy (SPM) measurements, that natural serpentine mineral can be mechanically exfoliated down to few-layer flakes, where monolayers can be easily resolved. The parent serpentine bulk material was initially characterized via conventional techniques like XRD, XPS, FTIR and Raman spectroscopies and the results show that it is predominantly constituted by the antigorite mineral. From ab initio calculations using density functional theory, we also determine the geometry and electronic structure of antigorite, the observed structural form of serpentine. Additionally, we further characterized electrical and mechanical properties of the obtained 2D material flakes using SPM and broadband synchrotron infrared nanospectroscopy. Wavelength tuning of the serpentine vibrational resonances, assigned to in- and out-of-plane molecular vibrations, are observed and compared with the FTIR characterization of the parent bulk material. They show that there is no degradation of serpentine's structural properties during its mechanical exfoliation down to nanometer-thin sheets. Therefore, our results introduce the serpentine mineral as an attractive low-cost candidate in 2D materials applications.

Superlattice in collapsed graphene wrinkles

Topographic corrugations, such as wrinkles, are known to introduce diverse physical phenomena that can significantly modify the electrical, optical and chemical properties of two-dimensional materials. This range of assets can be expanded even further when the crystal lattices of the walls of the wrinkle are aligned and form a superlattice, thereby creating a high aspect ratio analogue of a twisted bilayer or multilayer – the so-called twisted wrinkle. Here we present an experimental proof that such twisted wrinkles exist in graphene monolayers on the scale of several micrometres. Combining atomic force microscopy and Raman spectral mapping using a wide range of visible excitation energies, we show that the wrinkles are extremely narrow and their Raman spectra exhibit all the characteristic features of twisted bilayer or multilayer graphene. In light of a recent breakthrough – the superconductivity of a magic-angle graphene bilayer, the collapsed wrinkles represent naturally occurring systems with tuneable collective regimes.

Watching Dynamic Self-Assembly of Web Buckles in Strained MoS2 Thin Films

Thin films with large compressive residual stress and low interface adhesion can buckle and delaminate from relatively rigid substrates, which is a common failure mode of film/substrate interfaces. Current studies mainly focused on the geometry of various buckling patterns and related physical origins based on a static point of view. However, fundamental understanding of dynamic propagation of buckles, particularly for the complicated web buckles, remains challenging. We adopt strained two-dimensional MoS₂ thin films to study the phenomenon of web buckling because their interface adhesion, namely van der Waals interaction, is naturally low. With a delicately site-controlled initiation, web buckles can be triggered and their dynamic propagation is in situ observed facilely. Finite element modeling shows that the formation of web buckles involves the propagation and multilevel branching of telephone-cord blisters. These buckled semiconducting films can be patterned by spatial confinement and potentially used in diffuse-reflective coatings, microfluidic channels, and hydrogen evolution reaction electrodes. Our work not only reveals the hidden mechanisms and kinematics of propagation of web buckles on rigid substrates but also sheds light on the development of semiconducting devices based on buckling engineering.

Apparent Softening of Wet Graphene Membranes on a Microfluidic Platform

Graphene is regarded as the toughest two-dimensional material (highest in-plane elastic properties) and, as a consequence, it has been employed/proposed as an ultrathin membrane in a myriad of microfluidic devices. Yet, an experimental investigation of eventual variations on the apparent elastic properties of a suspended graphene membrane in contact with air or water is still missing. In this work, the mechanical response of suspended monolayer graphene membranes on a microfluidic platform is investigated via scanning probe microscopy experiments. A high elastic modulus is measured for the membrane when the platform is filled with air, as expected. However, a significant apparent softening of graphene is observed when water fills the microfluidic system. Through molecular dynamics simulations and a phenomenological model, we associate such softening to a water-induced uncrumpling process of the suspended graphene membrane. This result may bring substantial modifications on the design and operation of microfluidic devices which exploit pressure application on graphene membranes.