Screen-printing of flexible semi-transparent electrodes and devices based on silver nanowire networks

Flexible Quantum Dot Light-Emitting Device for Emerging Multifunctional and Smart Applications

Quantum dot light-emitting diodes (QLEDs), owing to their exceptional performances in device efficiency, color purity/tunability in the visible region and solution-processing ability on various substrates, become a potential candidate for flexible and ultrathin electroluminescent (EL) lighting and display. Moreover, beyond the lighting and display, flexible QLEDs are enabled with endless possibilities in the era of the internet of things and artificial intelligence by acting as input/output ports in wearable integrated systems. Challenges remain in the development of flexible QLEDs with the goals for high performance, excellent flexibility/even stretchability, and emerging applications. In this paper, the recent developments of QLEDs including quantum dot materials, working mechanism, flexible/stretchable strategies and patterning strategies, and highlight its emerging multifunctional integrations and smart applications covering wearable optical medical devices, pressure-sensing EL devices, and neural smart EL devices, are reviewed. The remaining challenges are also summarized and an outlook on the future development of flexible QLEDs made. The review is expected to offer a systematic understanding and valuable inspiration for flexible QLEDs to simultaneously satisfy optoelectronic and flexible properties for emerging applications.

Facile Transfer of a Transparent Silver Nanowire Pattern to a Soft Substrate Using Graphene Oxide as a Double-Sided Adhesion-Tuning Layer

Silver nanowires (AgNWs) have been employed in various optoelectronic devices as transparent electrodes. However, it remains a great challenge to facilely pattern silver nanowires to realize desirable soft skin devices. Here, we develop an intact transfer method via a double-layered adhesion regulator of graphene oxide (GO) enabling complete transfer of a silver nanowire pattern from a tough substrate onto soft polydimethylsiloxane (PDMS) and flexible polyethylene (PE). We achieve positive and negative patterns simultaneously when selectively transferring silver nanowire patterns. The resulting patterned AgNW electrodes have uniform conductivity and long-term stability. The underlying mechanism of the clean transfer is thoroughly investigated via transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). GO plays a role in reducing the adhesion of AgNW to the donor tough substrate and enhancing adhesion of AgNW to the target soft substrate simultaneously. Finally, we demonstrate the utility of the patterned electrodes as transparent sensors detecting body motion. This work offers an effective solution to the challenging patterning problem of silver nanowires on a hydrophobic soft substrate, which is compatible with the soft component in emerging smart skin or wearable electronics.

Novel Insights into Inkjet Printed Silver Nanowires Flexible Transparent Conductive Films

Silver nanowire (AgNWs) inks for inkjet printing were prepared and the effects of the solvent system, wetting agent, AgNWs suspension on the viscosity, surface tension, contact angle between ink droplet and poly(ethylene) terephthalate (PET) surface, and pH value of AgNWs ink were discussed. Further, AgNWs flexible transparent conductive films were fabricated by using inkjet printing process on the PET substrate, and the effects of the number printing layer, heat treatment temperature, drop frequency, and number of nozzle on the microstructures and photoelectric properties of AgNWs films were investigated in detail. The experimental results demonstrated that the 14-layer AgNWs printed film heated at 60 °C and 70 °C had an average sheet resistance of 13 Ω∙sq⁻¹ and 23 Ω∙sq⁻¹ and average transparency of 81.9% and 83.1%, respectively, and displayed good photoelectric performance when the inkjet printing parameters were set to the voltage of 20 V, number of nozzles of 16, drop frequency of 7000 Hz, droplet spacing of 15 μm, PET substrate temperatures of 40 °C and nozzles of 35 °C during printing, and heat treatment at 60 °C for 20 min. The accumulation and overflow of AgNWs at the edges of the linear pattern were observed, which resulted in a decrease in printing accuracy. We successfully printed the heart-shaped pattern and then demonstrated that it could work well. This showed that the well-defined pattern with good photoelectric properties can be obtained by using an inkjet printing process with silver nanowires ink as inkjet material.

Inkjet Printing of Flexible Transparent Conductive Films with Silver Nanowires Ink

The inkjet printing process is a promising electronic printing technique for large-scale, printed, flexible and stretchable electronics because of features such as its high manufacturing speed, environmental friendliness, simple process, low cost, accurate positioning, and so on. As the base material of printed conductive patterns, conductive ink is the foundation of the development of printed electronics technology, and directly affects the performance and the quality of electronic products. In this paper, conductive ink with silver nanowires (AgNWs) was prepared, with AgNWs of lengths of 2–5 µm and diameters of 20 nm or so, isopropyl alcohol and ethylene glycol as the mixed solvents, and modified polysilane as the wetting agent. We discussed the relationship between the formula of the AgNWs ink and the surface tension, viscosity, contact angle between ink droplet and poly(ethylene) terephthalate (PET) surface, as well as the film-forming properties of the ink. Further, we analyzed the effects of the number of printed layers and the ink concentration of the AgNWs on the microstructures, photoelectric properties and accuracy of the printed patterns, as well as the change in the sheet resistance of the film during different bending cycles. The experimental results show that flexible transparent conductive patterns with a light transmittance of 550 nm of 83.1–88.4% and a sheet resistance of 34.0 Ω∙sq⁻¹–78.3 nm∙sq⁻¹ can be obtained by using AgNWs ink of 0.38 mg∙mL⁻¹ to 0.57 mg∙mL⁻¹, a poly (ethylene terephthalate) (PET) substrate temperature of 40 °C, a nozzle temperature of 35 °C, and heat treated at 60 °C for 10 min. These performances indicate the excellent potential of the inkjet printing of AgNWs networks for developing flexible transparent conductive film.

Highly stretchable patternable conductive circuits and wearable strain sensors based on polydimethylsiloxane and silver nanoparticles

Patterned circuits on highly stretchable conductive films are critical in the practical application of next-generation flexible and wearable devices. Currently, most patterned circuits do not exhibit highly stretchable properties, and a lithography process in vacuum is required. In this study, silver nanoparticles (AgNPs) and liquid polydimethylsiloxane (PDMS) are mixed together to form liquid conductive adhesives (CAs). Various stretchable patterned circuits are prepared using this CA to achieve all required functions. Six basic patterns, including rhombus, straight lines, serpentine, triangle, ellipses, and fold line, are studied for their stretchable and electrical properties. The film is found to maintain excellent conductivity after withstanding tensile strain of up to 320% and more than 10 000 stretching-releasing cycles of 0%-150%. More than 86% of visible lights can be penetrated through the film due to the transparent substrates. Functional and wearable devices are manufactured, and devices fabricated from rhombus-pattern circuits are found to exhibit stable electrical conductivity when subjected to very high tensile strains. According to the sensitivity of the straight-line patterned circuit to strain, a repeatable use sensitive strain sensor is studied. Also, two types of artificial electrical skin are demonstrated.