Few layered MoS2 grown on pencil graphite: a unique single-step approach to fabricate economical, binder-free electrode for supercapacitor applications

Controlled electrochemical surface exfoliation of graphite pencil electrodes for high-performance supercapacitors

A controlled surface exfoliation method for graphite pencil electrodes using an environmentally friendly, low cost and scalable electrochemical process is reported. A simple direct current power supply in a neutral medium is used for inducing graphene formation on the electrode surface in a controlled manner. The electrochemical properties of the surface exfoliated electrode are characterized, displaying a >300× increase in the electrochemical surface area and >50× decrease in the electrode resistance after exfoliation. The surface graphene layer is characterized using electron microscopy, Raman, infrared, X-ray photoelectron, and energy dispersive X-ray spectroscopies and X-ray diffractometry showing a fully exfoliated surface, formation of surface defects and mild surface graphene oxidation while maintaining an intact graphitic crystal structure. The surface exfoliated electrode is tested as a supercapacitor demonstrating more than 2 orders of magnitude improvement over non-exfoliated electrode in both 3-electrode and 2-electrode setups and achieving a high areal capacitance of ∼54 mF cm^-2. The benign nature, low cost, scalability of our controlled surface exfoliation methodology, and its significant impact on the electrochemical properties of the electrode make it very promising for further investigation in various applications such as energy storage and conversion, sensors, and catalysis.

One-step chemically vapor deposited hybrid 1T-MoS2/2H-MoS2 heterostructures towards methylene blue photodegradation

The photocatalytic degradation of methylene blue is a straightforward and cost-effective solution for water decontamination. Although many materials have been reported so far for this purpose, the proposed solutions inflicted high fabrication costs and low efficiencies. Here, we report on the synthesis of tetragonal (1T) and hexagonal (2H) mixed molybdenum disulfide (MoS2) heterostructures for an improved photocatalytic degradation efficiency by means of a single-step chemical vapor deposition (CVD) technique. We demonstrate that the 1T-MoS2/2H-MoS2 heterostructures exhibited a narrow bandgap ∼ 1.7 eV, and a very low reflectance (<5%) under visible-light, owing to their particular vertical micro-flower-like structure. We exfoliated the CVD-synthesised 1T-MoS2/2H-MoS2 films to assess their photodegradation properties towards the standard methylene blue dye. Our results showed that the photo-degradation rate-constant of the 1T-MoS2/2H-MoS2 heterostructures is much greater under UV excitation (i.e., 12.5 × 10-3 min-1) than under visible light illumination (i.e., 9.2 × 10-3 min-1). Our findings suggested that the intermixing of the conductive 1T-MoS2 with the semi-conducting 2H-MoS2 phases favors the photogeneration of electron-hole pairs. More importantly, it promotes a higher efficient charge transfer, which accelerates the methylene blue photodegradation process.

3D nitrogen-doped graphene created by the secondary intercalation of ethanol with enhanced specific capacity

Here, we report an improved synthesis strategy for 3D nitrogen-doped graphene to increase the specific capacity of supercapacitors. Ethanol replaces the strong oxidant hydrogen peroxide in the improved Hummers method, and the loose porous structure is conducive to charge transfer. N-doped porous 3D graphene was synthesized from RGO-C prepared by ethanol secondary intercalation modification of functional groups. Ammonia was selected as the dopant; the microstructure and electrochemical performance of samples synthesized at different temperatures were examined. The results demonstrate that the 3D nitrogen-doped graphene (N-RGO-5) had a layered tuple shape with a sheet thickness of 0.612 nm.The specific surface area of the 3D N-RGO-5, which was prepared at 190°C, was 258.371 m²g^-1, which was higher than that (5.877 m²g^-1) of the original graphite. The 3D N-RGO-5 exhibited a specific capacitance of 236 F g^-1and an energy density of 32.78 Wh kg^-1at a current density of 1 A g^-1, which is 27% higher than the specific capacitance of RGO. The 3D N-RGO-5 demonstrated an excellent capacity retention rate of 93.6% after 5000 cycles at a current density of 1 A g^-1. This study demonstrates that the unique 3D structure and N-doping of N-RGO considerably improved the overall energy storage performance of graphene-based nanomaterials.

Zn induced NiCo composites modified by carbon materials as a battery-type electrode material for high-performance supercapacitors

The development of simple preparation and excellent capacity performance electrode materials is the key to energy conversion and storage for supercapacitors. Based on the growth mechanism of crystal, Zn induced NiCo nanosheets and nanoneedles composite structure deposed on Ni foam (ZNC) are successfully attained by a facile one-step method, the growth mechanism of the composite structure is further discussed. Because of its unique composites structure and additional modification of carbon, the carbon modified ZNC (ZNC@C) delivers better energy storage ability (2280 mC cm^-2at 2 mA cm^-2) compare to ZNC. An asymmetric supercapacitor (ASC) is assembled by ZNC@C as the positive electrode and carbonized popcorn as the negative electrode. The ASC exhibits good energy storage performance. Zn also positively affects the adsorption energy to enhance the capacitance property based on Density Functional theory calculation. The simple method for the composite structure by tuning the kinetics behaver of the crystal can provide a new strategy in synthesizing the materials, and the material with a unique structure and high performance will have potential applications in the field of energy storage.

Bio-inspired gelatin/single-walled carbon nanotube nanocomposite for transient electrochemical energy storage: An approach towards eco-friendly and sustainable energy system

Wide-scale production of non-biodegradable e-waste from electrical appliances are causing great harm to the environment. The use of bio-polymer based nanomaterials may offer a promising approach for the fabrication of eco-friendly sustainable devices. In this work, gelatin/single walled carbon nanotube (Gel/SWCNT) nanocomposites were prepared by a simple and economic aqueous casting method. The effect of SWCNT on the structural, surface-morphological, electrical, and electrochemical properties of the nanocomposite was studied. Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscope (FESEM) showed an improved degree of interaction between the SWCNTs and Gel matrix. The surface wettability of the nanocomposites was found to be changed from hydrophilic to hydrophobic in nature due to the incorporation of SWCNTs into the Gel matrix. The incorporation of SWCNTs was also found to reduce the DC resistivity of the nanocomposite by 4 orders of magnitude. SWCNTs also increase the specific capacitance of the nanocomposite from 124 mF/g to 467 mF/g at a current density of 0.3 mA/g. The electrochemical impedance spectroscopy analysis revealed an increase of the pseudo-capacitance increased from 9.4 μF to 31 μF due to the incorporation of SWCNT. The Gel/SWCNT nanocomposite showed cyclic stability with capacitive retention of about 98% of its initial capacitance after completing 2000 charging/discharging cycles at a current density of 100 mA/g. The nanocomposite completely dissolves in water within 12 h, demonstrates it as a promising candidate for transient energy storage applications. The Gel/SWCNT nanocomposite may offer a new route for the synthesis of eco-friendly, biodegradable, and transient devices.

A ruthenium(IV) disulfide based non-enzymatic sensor for selective and sensitive amperometric determination of dopamine

An electrochemical dopamine (DA) sensor has been fabricated by modifying a glassy carbon electrode (GCE) with ruthenium disulfide (RuS₂) nanoparticles (NPs). FESEM and TEM micrographs show the NPs to have an average size of ~45 nm. XRD, Raman and EDS, in turn, confirm the successful formation of cubic phased RuS₂ NPs. The modified GCE displays has attractive features of merit that include (a) an ultra-low detection limit (73.8 nM), (b) fast response time (< 4 s), (c) a low oxidation potential (0.25 V vs. Ag|AgCl), (d) excellent reproducibility and stability, (e) an electrochemical sensitivity of 18.4 μA μM^-1 cm^-2 and 1.8 μA.μM^-1.cm^-2 in the linear ranges from 0.1-10 μM of DA (R² = 0.97) and 10-80 μM of DA (R² = 0.99), respectively. The sensor exhibits excellent specificity over potential interferents like ascorbic acid, glucose and uric acid. The superior performance of the sensor is attributed to its high electrical conductivity, large electro-active surface, and large numbers of exposed catalytically active sites resulting from the presence of unreacted sulfur atoms. Graphical abstract A ruthenium disulfide modified electrochemical sensor material was obtained by single-step hydrothermal synthesis. Sensitive and highly selective detection of dopamine is demonstrated.