Light-induced pyroelectric property of self-powered photodetectors based on all-inorganic perovskite quantum dots

Pyro-Phototronic Effect Enhanced Pyramid Structured p-Si/n-ZnO Nanowires Heterojunction Photodetector

The emergence of nanomaterials has brought about the development of miniature photodetectors into a new stage, and ZnO nanomaterials are currently one of the most popular research objects. Here, the performance of a photodetector consisting of micropyramid structured p-Si/n-ZnO NWs heterojunction constructed by an anisotropic chemical etching and hydrothermal method is optimized by using the pyro-phototronic effect, and the photoresponses of the device to 405 and 648 nm lasers are investigated. The results show that, with the introduction of pyro-phototronic effect, the photoresponsivity R_pyro increases to 208 times that of R_photo when the wavelength is 405 nm and the optical power density is 0.0693 mW/cm². Moreover, with the increase of the chopper frequency, the photocurrent increases by more than 3 times, and the photoresponsivity is also increased by a factor of 4.5, making it possible to detect ultrafast pulsed light. In addition, in order to increase the current collection efficiency, a thin film Al layer was deposited as the back electrode on the basis of the device, and the photocurrent and photoresponsivity are significantly improved. Finally, the coupling between the pyro-phototronic effect and the piezo-phototronic effect is analyzed by applying compressive strain to the photodetector. When the compressive strain is -1.02%, the photocurrent decreases by 31.4% and the photoresponsivity decreases by 27.9% due to the opposite direction between laser illumination induced pyroelectric polarization charges and compressive strain induced piezoelectric polarization charges. This work not only demonstrates the great potential of pyro-phototronic effect in enhancing the silicon-based heterojunction photodetectors for high-performance photodetection and ultrafast pulsed light detection but also provides assistance for a better understanding of the coupling mechanism between pyro-phototronic and piezo-phototronic effects.

Impact of bismuth-doping on enhanced radiative recombination in lead-free double-perovskite nanocrystals

Lead-free double-perovskite nanocrystals (NCs) have received considerable attention as promising candidates for environmentally friendly optical applications. Furthermore, double-perovskite nanostructures are known to be physically stable compared to most other inorganic halide perovskites, with a generic chemical formula of ABX₃ (e.g., A = Cs⁺; B = Sn²⁺ or Ge²⁺; X = Cl^-, Br^-, I^-, or their combination). However, relevant experimental studies on the photophysical properties are still insufficient for Pb-free double-perovskite NCs. Herein, we synthesized Cs₂Ag_0.65Na_0.35InCl₆ NCs doped with bismuth (Bi³⁺) ions and investigated their photophysical properties to reveal the role of the dopant on the enhanced photoemission properties. Specifically, it was found that the photoluminescence quantum yield (PLQY) increased up to 33.2% by 2% Bi-doping. The optical bandgap of the NCs decreased from 3.47 eV to 3.41 eV as the amount of the dopant increased from 2% to 15%. To find out the effect of Bi-doping, the temperature-dependent PL properties of the undoped and doped NCs were investigated by utilizing steady-state and time-resolved PL spectroscopy. With increasing the temperature from 20 K to 300 K, the PL intensities of the doped NCs decreased slower than the undoped ones. The correlated average PL lifetimes of both the bismuth-doped and undoped NCs decreased with increasing the temperature. The experimental results revealed that all the NC samples showed thermal quenching with the temperature increasing, and the PL quenching was suppressed in bismuth-doped NCs.

In Situ Synthesis of Robust Polyvinylpyrrolidone-Based Perovskite Nanocrystal Powders by the Fiber-Spinning Chemistry Method and Their Versatile 3D Printing Patterns

All-inorganic halide perovskite nanocrystals (PNCs) have received increasing attention due to their excellent optical properties. However, the inherent instability and the large amount of volatile organic compounds during the production process have severely limited their applications. In this research, we employed the microfluidic electrostatic spinning method to synthesize polyvinylpyrrolidone (PVP)-based PNC (CsPbBr₃/PVP) powders directly by spinning chemistry, where the fibers serve as reactors. Thus, 20.1 g of CsPbBr₃/PVP powders was obtained, which exhibits good fluorescent properties and high stability. Based on these excellent properties, several new applications were explored, including 3D printing, direct encapsulants for light-emitting diodes, and fluorescent coatings. It should be noted that the powder showed distinct advantages in 3D printing, allowing the fabrication of a series of fluorescent patterns, which offers a new candidate for fluorescent 3D printable materials. This work not only opens up an optimal way for facile production of fluorescent powders by the spinning chemistry strategy, but also provides a new perspective for various application directions, especially for 3D printing.