Charged membranes based on spider silk-inspired nanofibers for comprehensive and continuous purification of wastewater

Bio-inspired anti-fouling strategies for membrane-based separations

Membrane-based filtration processes are attractive for industrial separation processes, because of energy-savings and cost-effectiveness. However, membrane fouling continues to be a major drawback. To overcome fouling and increase the efficacy of membrane separation processes, disruptive solutions can be found in nature. Nature-inspired chemical engineering (NICE) seeks to understand the fundamental mechanisms behind desired properties in natural systems and then applies these in practical applications where similar challenges need to be overcome, whilst considering all length scales. In this review, examples are provided where the systematic design methodology used in NICE is applied to decrease fouling and its effects on membrane-based filtration. Expanding the application of this framework will facilitate the identification and utilisation of common traits among highly efficient natural systems to propose innovative engineering solutions for water treatment. Beyond membrane separations, the NICE approach has already seen success in other areas, including electrocatalysts for H2 fuel cells, CO2 reduction, medical applications, and fluidized beds. We recommend increased modelling efforts to complement experimental work and to deepen the understanding of the mechanisms behind biological, non-fouling membranes, as well as other biological mechanisms relevant to water management, anti-fouling, and antimicrobial strategies. Additionally, we encourage making a clear distinction between biomimicry, bio-inspiration, and bio-integration, with guidelines and standardized nomenclature.

High-Performance Membranes Based on Spherical-Beaded Nanofibers and Nanoarchitectured Networks for Water-in-Oil Emulsion Separation

High-performance separation materials for oil-water emulsions are crucial to environmental protection and resource recovery; however, most existing fibrous separation materials are subject to large pore size and low porosity, resulting in limited separation performance. Herein, we create high-performance membranes consisting of spherical-beaded nanofibers and nanoarchitectured networks (nano-nets) using electrostatic spinning/netting technology, for water-in-oil emulsion separation. By manipulating the nonequilibrium stretching of jets, spherical-beaded nanofibers capable of generating a robust microelectric field are fabricated as scaffolds, on which charged droplets are induced to eject and phase separate to self-assemble nano-nets with small pores. Benefiting from 3D undulating networks with cavities originating from 2D nano-nets supported by 1D spherical-beaded nanofibers, the membranes exhibit under-oil superhydrophobicity (>152°), a striking separation performance with an efficiency of >99.2% and a flux of 5775 L m-2 h-1, together with wide pressure applicability, antifouling, and reusability. This work may open up new horizons in developing fibrous materials for separation and purification.

A sustainable layered nanofiber/sheet aerogels enabling repeated life cycles for effective oil/water separation

Discarded oil-containing absorbents, which has been used in handling oil spills, are tricky to deal with and have rose global environmental concerns regarding release of microplastics. Herein, we developed a facile strategy to fabricate sustainable absorbents by a gas-inflating method, through which 2D electrospinning polycaprolactone nanofiber membranes were directly inflated into highly porous 3D nanofiber/sheet aerogels with layered long fiber structure. The membranes were inflated rapidly from a baseline porosity of 81.98% into 97.36-99.42% in 10-60 min. The obtained aerogels were further wrapped with -CH₃ ended siloxane structures using CH₃SiCl₃. This hydrophobic absorbent (CA ≈ 145°) could rapidly trap oils from water with sorption range of 25.60-42.13 g/g and be recycled by simple squeeze due to its mechanical robustness. As-prepared aerogels also showed high separation efficiency to separate oils from both oil/water mixtures and oil-in-water emulsions (>96.4%). Interestingly, the oil-loaded absorbent after cleaning with absolute ethanol could be re-dissolved in selected solvents and promptly reconstituted by re-electrospinning and gas-inflation. The reconstituted aerogels were used as fire-new oil absorbents for repeated life cycles. The novel design, low cost and sustainability of the absorbent provides an efficient and environmentally-friendly solution for handling oil spills.

Hygroscopic and cool boron nitride Nanosheets/Regenerated flax fiber material microstructure Dual-Cooling composite fabric

Developing cooling textiles with unidirectional water transport performances and high thermal conductivities is essential for personal thermal and wet comfort in human activities. We report a green, degradable, hygroscopic cooling material and dual-cooling composite fabric (d-CCF). A boron nitride nanosheet/regenerated flax fiber (BNNS/RFF) material with a high thermal conductivity was prepared by dissolving recovered flax fibers with a green, efficient 1-butyl-3-methylimidazole chloride/dimethyl sulfoxide system and adding BNNSs. The 60- wt% BNNS/RFF materials had excellent thermal conductivity and hydrophilicity, the breaking strength reached 120 MPa, and the elongation was 15.8 %. The d-CCF consisted of cool polyester (CPET) yarn (inner layer), CPET/bamboo composite yarn (middle layer), bamboo yarn, and 60- wt% BNNS/RFF (outer layer) with unobstructed heat dissipation and evaporation cooling for effective moisture and thermal management. This d-CCF had distinct advantages, including a high one-way water transport index (468 %), an extremely high evaporation rate (0.3818 g h^-1), inner layer maximum heat flux (0.191 W cm^-2), and outer layer maximum heat flux (0.249 W cm^-2), providing a cooling sensation upon contact. Compared to cotton fabrics, the d-CCF could keep the skin cooler by 2.5 °C. This work provides a strategy to fabricate environmentally friendly BNNS/RFF materials and a facile pathway for cooling textile development for human health management.

From 1D Nanofibers to 3D Nanofibrous Aerogels: A Marvellous Evolution of Electrospun SiO2 Nanofibers for Emerging Applications

One-dimensional (1D) SiO2 nanofibers (SNFs), one of the most popular inorganic nanomaterials, have aroused widespread attention because of their excellent chemical stability, as well as unique optical and thermal characteristics. Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures, manageable dimensions, and modifiable properties, which hold great potential in many cutting-edge applications including aerospace, nanodevice, and energy. In this review, substantial advances in the structural design, controllable synthesis, and multifunctional applications of electrospun SNFs are highlighted. We begin with a brief introduction to the fundamental principles, available raw materials, and typical apparatus of electrospun SNFs. We then discuss the strategies for preparing SNFs with diverse structures in detail, especially stressing the newly emerging three-dimensional SiO2 nanofibrous aerogels. We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement. In addition, we showcase recent applications enabled by electrospun SNFs, with particular emphasis on physical protection, health care and water treatment. In the end, we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.

Broccoli-liked silver phosphate nanoparticles supported on green nanofiber membrane for visible-light driven photodegradation towards water pollutants

In view of the practical application, it is imperative to develop efficient, exercisable, and visible light driven water pollution treatment materials. Herein, a high-efficiency green photocatalytic membrane for water pollution treatment is proposed and fabricated conveniently. Firstly, silver phosphate (Ag₃PO₄) nanoparticles with controlled morphology were prepared by simple liquid-phase precipitation method, and then a hierarchical structured Ag₃PO₄@polylactic acid (PLA) composite nanofiber membrane was prepared by electrospinning. Using electrospun PLA nanofiber membrane as a carrier of photocatalysts can significantly improve the dispersion of Ag₃PO₄nanoparticles, and increase the contact probability with pollutants and photocatalytic activity. The prepared PLA@Ag₃PO₄composite membrane was used to degrade methylene blue (MB) and tetracycline hydrochloride (TC) under visible light irradiation. The results showed that the removal ratio of pollutants on Ag₃PO₄@PLA composite nanofiber membrane was 94.0% for MB and 82.0% for TC, demonstrating an outstanding photocatalytic activity of composite membrane. Moreover, the PLA nanofiber membrane is a self-supported and biodegradable matrix. After five cycles, it can still achieve 88.0% of the initial photocatalytic degradation rate towards MB, showing excellent recyclability. Thus, this composite nanofiber membrane is a high-efficiency and environmental-friendly visible light driven water pollution treatment material that could be used in real applications.