Exploring light confinement in laser-processed LYSO:Ce for photon counting CT application

Detection performance of pixelated lutetium-yttrium oxyorthosilicate (LYSO) scintillators for high-resolution photon-counting CT imaging

High-resolution photon-counting detector (PCD) computed tomography (CT) imaging is increasingly used for several applications. Recent technological advances in CT instrumentation have introduced various types of radiation detectors. Therefore, this work aims at evaluating the lutetium-yttrium oxyorthosilicate (LYSO) scintillator for use in PCD CT from a detector point of view. To do so, a mini-CT prototype was designed and constructed based on the pixelated LYSO blocks. The detector comprises four 10 × 10 linearly arranged LYSO blocks coupled with four position-sensitive photomultiplier tubes. The prototype utilizes a point gamma-ray source along with a cone-beam collimator. An in-home MATLAB-based data processing software package was also developed for storing the list-mode data, event positioning, and energy windowing. A set of experiments were conducted to assess the performance of the constructed energy-resolved LYSO:Ce detector for mini-CT imaging. The results show good crystal identification for all blocks with a maximum peak-to-valley ratio of 3.48. In addition, the findings confirm that the developed detector is position-sensitive. The 20% energy window provides an optimal performance by simultaneously providing good crystal identification and a scatter removal factor of 0.71. A 96% uniformity was also observed when the detector was irradiated with a uniform flood. The spatial resolution of the mini-CT prototype in the x- and y-directions was calculated to be 0.9 and 0.93 mm, respectively, corrected for a magnification factor of 2.5. It is concluded that the pixelated LYSO crystal is a promising alternative to the current detectors and would be the scintillator of choice for high-resolution PCD CT imaging tasks.

Silicon photomultiplier-based scintillation detectors for photon-counting CT: A feasibility study

PURPOSE

The implementation of photon-counting detectors is widely expected to be the next breakthrough in X-ray computed tomography (CT) instrumentation. A small number of prototype scanners equipped with direct-conversion detectors based on room-temperature semiconductors, such as CdTe and CdZnTe (CZT), are currently installed at medical centers. Here, we investigate the feasibility of using silicon photomultiplier (SiPM)-based scintillation detectors in photon-counting computed tomography (PCCT) scanners, as a potential alternative to CdTe and CZT detectors.

METHODS

We introduce a model that allows us to compute the expected energy resolution as well as the expected pulse shape and associated rate capability of SiPM-based PCCT detectors. The model takes into account SiPM saturation and optical crosstalk, because these phenomena may substantially affect the performance of SiPM-based PCCT detectors with sub-mm pixels. We present model validation experiments using a single-pixel detector consisting of a 0.9 × 0.9 × 1.0 mm³ LuAP:Ce scintillation crystal coupled to a 1 × 1 mm² SiPM. We subsequently use the validated model to compute the expected performance of the fast scintillators LYSO:Ce, LuAP:Ce, and LaBr₃ :Ce, coupled to currently available SiPMs, as well as to a more advanced SiPM prototype with improved dynamic range, for sub-mm pixel sizes.

RESULTS

The model was found to be in good agreement with the validation experiments, both with respect to energy resolution and pulse shape. It shows how saturation progressively degrades the energy resolution of detectors equipped with currently available SiPMs as the pixel size decreases. Moreover, the expected pulse duration is relatively long (~200 ns) with these SiPMs. However, when LuAP:Ce and LaBr₃ :Ce are coupled to the more advanced SiPM prototype, the pulse duration improves to less than 60 ns, which is in the same order of magnitude as pulses from CdTe and CZT detectors. It follows that sufficient rate capability can be achieved with pixel sizes of 400 μm or smaller. Moreover, LaBr₃ :Ce detectors can provide an energy resolution of 11.5%-13.5% at 60 keV, comparable to CdTe and CZT detectors.

CONCLUSIONS

This work provides first evidence that it may be feasible to develop SiPM-based scintillation detectors for PCCT that can compete with CdTe and CZT detectors in terms of energy resolution and rate capability.

A layered single-side readout depth of interaction time-of-flight-PET detector

We are exploring a scintillator-based PET detector with potential of high sensitivity, depth of interaction (DOI) capability, and timing resolution, with single-side readout. Our design combines two previous concepts: (1) multiple scintillator arrays stacked with relative offset, yielding inherent DOI information, but good timing performance has not been demonstrated with conventional light sharing readout. (2) Single crystal array with one-to-one coupling to the photodetector, showing superior timing performance compared to its light sharing counterparts, but lacks DOI. The combination, where the first layer of a staggered design is coupled one-to-one to a photodetector array, may provide both DOI and timing resolution and this concept is here evaluated through light transport simulations. Results show that: (1) unpolished crystal pixels in the staggered configuration yield better performance across all metrics compared to polished pixels, regardless of readout scheme. (2) One-to-one readout of the first layer allows for accurate DOI extraction using a single threshold. The number of multi pixel photon counter (MPPC) pixels with signal amplitudes exceeding the threshold corresponds to the interaction layer. This approach was not possible with conventional light sharing readout. (3) With a threshold of 2 optical photons, the layered approach with one-to-one coupled first layer improves timing close to the MPPC compared to the conventional one-to-one coupling non-DOI detector, due to effectively reduced crystal thickness. Single detector timing resolution values of 91, 127, 151 and 164 ps were observed per layer in the 4-layer design, to be compared to 148 ps for the single array with one-to-one coupling. (4) For the layered design with light sharing readout, timing improves with increased MPPC pixel size due to higher signal per channel. In conclusion, the combination of straightforward DOI determination, good timing performance, and relatively simple design makes the proposed concept promising for DOI-Time-of-Flight PET detectors.