Combined particle-image velocimetry and force analysis of the three-dimensional fluid-structure interaction of a natural owl wing

The role of leading-edge serrations in controlling the flow over owls' wing

We studied the effects of leading-edge serrations on the flow dynamics developed over an owl wing model. Owls are predatory birds. Most owl species are nocturnal, with some active during the day. The nocturnal ones feature stealth capabilities that are partially attributed to their wing microfeatures. One of these microfeatures is small rigid combs (i.e. serrations) aligned at an angle with respect to the incoming flow located at the wings' leading-edge region of the primaries. These serrations are essentially passive flow control devices that enhance some of the owls' flight characteristics, such as aeroacoustics and, potentially, aerodynamics. We performed a comparative study between serrated and non-serrated owl wing models and investigated how the boundary layer over these wings changes in the presence of serrations over a range of angles of attack. Using particle image velocimetry, we measured the mean and turbulent flow characteristics and analyzed the flow patterns within the boundary layer region. Our experimental study suggests that leading-edge serrations modify the boundary layer over the wing at all angles of attack, but not in a similar manner. At low angles of attack (<20°), the serrations amplified the turbulence activity over the wing planform without causing any significant change in the mean flow. At 20° angle of attack, the serrations act to suppress existing turbulence conditions, presumably by causing an earlier separation closer to the leading-edge region, thus enabling the flow to reattach prior to shedding downstream into the wake. Following the pressure Hessian equation, turbulence suppression reduces the pressure fluctuations gradients. This reduction over the wing would weaken, to some extent, the scattering of aerodynamic noise in the near wake region.

A Comparison of Aerodynamic Parameters in Two Subspecies of the American Barn Owl (Tyto furcata)

Simple Summary

Morphology and function depend on the ecological niche in which an animal lives. Barn owls, occurring on all continents, occupy a nocturnal niche. These birds prey mainly on small rodents but include other small vertebrates and invertebrates in the diet. The size of the barn-owl species and subspecies varies considerably. The American continent harbors the species Tyto furcata. The body mass of the subspecies in North America (T.f.pratincola) is about a factor of two higher than that of the subspecies living on the Galapagos archipelago (T.f.puncatissima). We asked how this difference translates into aerodynamic parameters. The key question was whether there is so-called similarity scaling or not. In other words, whether important aerodynamic parameters scale according to body mass. This is called isometric scaling. Deviation from isometric scaling is called allometric scaling. If we use the subspecies from the continent as a reference, we find that the Galapagos barn owl has relatively larger wings than expected from isometric scaling. This translates into a lower wing loading in punctatissima than in pratincola. A lower wing loading means higher maneuverability. We speculate that the higher maneuverability allows the Galapagos owl to catch smaller prey, especially insects.

Abstract

Aerodynamic parameters, such as wing loading, are important indicators of flight maneuverability. We studied two subspecies of the American Barn owl (Tyto furcata), the North American subspecies, T.f.pratincola, and the Galapagos subspecies, T.f.punctatissima, with respect to aerodynamic parameters and compared our findings with those in other owl and bird species. The body mass of T.f.pratincola is about two times higher than that of T.f.punctatissima. Wing loading between the two subspecies scales allometrically. Wing loading in T.f.pratincola is about 50% higher than in T.f.punctatissima. The scaling of wing length is not statistically different from the prediction for isometric scaling. By contrast, the wing chord in T.f.punctatissima is larger than predicted by isometric scaling, as is the wing area. The scaling of wing loading observed here for T.f.punctatissima differs considerably from the scaling in other owl and bird species as available in the literature. We speculate that the allometric scaling helps T.f.punctatissima to catch smaller prey such, as insects that are found in many pellets of T.f.punctatissima, despite the fact that in both subspecies, small rodents make up most of the diet.

Integrity of and damage to wings, feather vanes and serrations in barn owls

The silent flight of owls is well known. It has served as role model for the designs of new airplane wings and ventilators. One of the structural features that underlies silent flight is the serrated leading edge of the wing that is mainly formed by the tenth primary flight feather (P10). We examined here how much the wings, the P10 feather and the serrations in different populations of barn owls reflect the intact situation. First, when the P10 feather molts, no or fewer serrations are present. Furthermore, damage to feathers and serrations may occur. Damage may be due to several factors like broken feather tips, lost rami, barbules, or broken tips of serrations. The latter may cause a narrowing of the outer vane of the P10 feather. We quantitatively assessed damage by counting the number of wings with missing or broken primary feathers, the number of wings with a narrowed outer vane of the P10 feather, and the number of serrations with reduced length. Considerable damage occurred on wings and feathers on both the macroscopic and microscopic levels. The observed damage most likely influences flight performance. More damage occurred in Galapagos barn owls than in North American and European barn owls. The Galapagos population may be more vulnerable than the other populations because it may at least temporarily be in a bad nutritional state and, thus, postpone molt.

Distribution of the characteristics of barbs and barbules on barn owl wing feathers

Owls are known for the development of a silent flight. One conspicuous specialization of owl wings that has been implied in noise reduction and that has been demonstrated to change the aerodynamic behavior of the wing is a soft dorsal wing surface. The soft surface is a result of changes in the shape of feather barbs and barbules in owls compared with other bird species. We hypothesized that as the aerodynamic characteristics of a wing change along its chordwise and spanwise direction, so may the shape of the barbs and barbules. Therefore, we examined in detail the shapes of the barbs and barbules in chordwise and spanwise directions. The results showed changes in the shapes of barbs and barbules at the anterior and distal parts of the wing, but not at more posterior parts. The increased density of hook radiates at the distalmost wing position could serve to stiffen that vane part that is subject to the highest forces. The change of pennulum length in the anterior part of the wing and the uniformity further back could mean that a soft surface may be especially important in regions where flow separation may occur.

Features of owl wings that promote silent flight

Owls are an order of birds of prey that are known for the development of a silent flight. We review here the morphological adaptations of owls leading to silent flight and discuss also aerodynamic properties of owl wings. We start with early observations (until 2005), and then turn to recent advances. The large wings of these birds, resulting in low wing loading and a low aspect ratio, contribute to noise reduction by allowing slow flight. The serrations on the leading edge of the wing and the velvet-like surface have an effect on noise reduction and also lead to an improvement of aerodynamic performance. The fringes at the inner feather vanes reduce noise by gliding into the grooves at the lower wing surface that are formed by barb shafts. The fringed trailing edge of the wing has been shown to reduce trailing edge noise. These adaptations to silent flight have been an inspiration for biologists and engineers for the development of devices with reduced noise production. Today several biomimetic applications such as a serrated pantograph or a fringed ventilator are available. Finally, we discuss unresolved questions and possible future directions.