Antimicrobial activity of submicron glass fibres incorporated as a filler to a dental sealer

The Preventive Effect of A Magnetic Nanoparticle-Modified Root Canal Sealer on Persistent Apical Periodontitis

Persistent apical periodontitis is a critical challenge for endodontists. Developing root canal filling materials with continuous antibacterial effects and tightly sealed root canals are essential strategies to avoid the failure of root canal therapy and prevent persistent apical periodontitis. We modified the EndoREZ root canal sealer with the antibacterial material dimethylaminododecyl methacrylate (DMADDM) and magnetic nanoparticles (MNPs). The mechanical properties of the modified root canal sealer were tested. The biocompatibility of this sealer was verified in vitro and in vivo. Multispecies biofilms were constructed to assess the antibacterial effects of the modified root canal sealer. We applied magnetic fields and examined the extent of root canal sealer penetration in vitro and in vivo. The results showed that EndoREZ sealer containing 2.5% DMADDM and 1% MNP had biological safety and apical sealing ability. In addition, the modified sealer could increase the sealer penetration range and exert significant antibacterial effects on multispecies biofilms under an external magnetic field. According to the in vivo study, the apices of the root canals with the sealer containing 2.5% DMADDM and 1% MNP showed no significant resorption and exhibited only a slight increase in the periodontal ligament space, with a good inhibitory effect on persistent apical periodontitis.

Fast self-curing α-tricalcium phosphate/β-dicalcium silicate composites beneficial for root canal sealing treatment

Objectives

α-tricalcium phosphate (α-TCP) and β-dicalcium silicate (β-C2S) have attracted much attention since these two types of self-curing Ca-phosphate and Ca-silicate are valuable biomaterials for bone defect or endodontic therapy. However, the injectable paste of their individual with high liquid/solid ratio is junior for root canal sealing due to very long self-setting time, low pH value and/or much volume shrinkage during paste-to-cement transformation.

Methods

Our studies evaluated the effect of biphasic ratio, liquid/solid ratio and pH condition of aqueous medium on setting time and mechanical strength of this biphasic composite cement, and also the hydroxyapatite re-mineralization potential and anti-microleakage level of the cements with different α-TCP/β-C2S ratio were explored in vitro. A control group free of paste filler was included in the extracted teeth model. Dentine re-mineralization and microleakage degree were observed by scanning electron microscopy and microCT reconstruction analysis.

Results

It indicated that the weak acidic solution with pH value of 6.0 may produce a significantly shorter initial setting time (from 90 min to less 20 min) and expected final setting time (<150 min) for the biphasic composite (2:1 or 1:2) in comparison with the pure β-C2S. Notably, the phasic composites exhibited limited microleakage and induced hydroxyapatite mineralization in the dentine tubules. These hydraulic pastes also produced strong alkaline feature and appreciable compressive resistance (12–18 MPa) after setting for a very short time stage. Moreover, a link between the addition of α-TCP leading to fast re-mineralization reaction was established.

Significance

Our findings suggest that the appreciable self-setting and physicochemical properties adaption to root canal sealability make α-TCP/β-C2S composites as preferential candidates for endodontic treatments.

Strategies toward development of antimicrobial biomaterials for dental healthcare applications

Several approaches for elimination of oral pathogens are being explored at the present time since oral diseases remain prevalent affecting approximately 3.5 billion people worldwide. Need for antimicrobial biomaterials in dental healthcare include but is not restricted to designing resin composites and adhesives for prevention of dental caries. Constant efforts are also being made to develop antimicrobial strategies for clearance of endodontic space prior root canal treatment and for treatment of periimplantitis and periodontitis. This article discusses various conventional and nanotechnology-based strategies to achieve antimicrobial efficacy in dental biomaterials. Recent developments in the design and synthesis of antimicrobial peptides and antifouling zwitterionic polymers to effectively lessen the risks of antimicrobial drug resistance are also outlined in this review. Further, the role of contemporary strategies such as use of smart biomaterials, ionic solvent-based biomaterials and quorum quenchers incorporated biomaterials in the elimination of dental pathogens are described in detail. Lastly, we mentioned the approach of using polymers to print custom-made three-dimensional antibacterial dental products via additive manufacturing technologies. This review provides a critical perspective on the chemical, biomimetic, and engineering strategies intended for developing antimicrobial biomaterials that have the potential to substantially improve the dental health.

Antibacterial Properties of Nanoparticles in Dental Restorative Materials. A Systematic Review and Meta-Analysis

Background and Objectives: Nanotechnology has become a significant area of research focused mainly on increasing the antibacterial and mechanical properties of dental materials. The aim of the present systematic review and meta-analysis was to examine and quantitatively analyze the current evidence for the addition of different nanoparticles into dental restorative materials, to determine whether their incorporation increases the antibacterial/antimicrobial properties of the materials. Materials and Methods: A literature search was performed in the Pubmed, Scopus, and Embase databases, up to December 2018, following PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) guidelines for systematic reviews and meta-analyses. Results: A total of 624 papers were identified in the initial search. After screening the texts and applying inclusion criteria, only 11 of these were selected for quantitative analysis. The incorporation of nanoparticles led to a significant increase (p-value <0.01) in the antibacterial capacity of all the dental materials synthesized in comparison with control materials. Conclusions: The incorporation of nanoparticles into dental restorative materials was a favorable option; the antibacterial activity of nanoparticle-modified dental materials was significantly higher compared with the original unmodified materials, TiO₂ nanoparticles providing the greatest benefits. However, the high heterogeneity among the articles reviewed points to the need for further research and the application of standardized research protocols.

Effects of Ag/ZnO nanocomposite at sub-minimum inhibitory concentrations on virulence factors of Streptococcus mutans

OBJECTIVE

Streptococcus mutans (S. mutans), the main pathogen of dental caries, could be well killed by Ag/ZnO nanocomposite. However, effects on virulence factors remain to be elucidated. This study investigated effects of Ag/ZnO at sub-minimum inhibitory concentrations (sub-MICs) on virulence factors of S. mutans and related genes expressions.

DESIGN

Effects of Ag/ZnO on the growth of S. mutans was investigated by growth curves and MTT staining method. The influence of Ag/ZnO at sub-MICs on biofilm formation was measured by the crystal violet staining method and observed by a scanning electron microscopy. Adherence, cell-surface hydrophobicity, acidogenicity and extracellular polysaccharides (EPS) of S. mutans after treatment by Ag/ZnO at sub-MICs were also investigated. Virulence factors related genes expressions after treated by Ag/ZnO at 1/2 MIC was conducted by the quantitative real-time PCR (qRT-PCR) method.

RESULTS

Sub-MICs of Ag/ZnO exhibited a dose-dependent inhibition on the virulence factors of S. mutans. Specially, Ag/ZnO at 1/2 MIC decreased 69.00 % biofilm formation, 31.78 % sucrose-independent and 48.08 % sucrose-dependent adherence, 69.44 % cell-surface hydrophobicity and 72.45 % water-soluble and 90.60 % water-insoluble EPS. Furthermore, the expression of virulence factors related genes was significantly suppressed by Ag/ZnO at 1/2 MIC.

CONCLUSIONS

Ag/ZnO at sub-MICs inhibited multiple virulence factors of S. mutans through downregulating the related genes. Ag/ZnO nanocomposite could be used for prevention of dental caries at low dosage.

In vitro biofilm formation on different ceramic biomaterial surfaces: Coating with two bactericidal glasses

OBJECTIVES

To compare biofilm formation on the surface of different ceramic biomaterials to be used in implant dentistry.

METHODS

In vitro biofilm formation was investigated from mixtures of standard reference strains of Streptococcus oralis, Veillonella parvula, Actinomyces naeslundii, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis. Sterile ceramic calcium hydroxyapatite discs (HA) as control, sterile Al₂O₃/Ce-TZP nanocomposite sandblasted discs (material A1) and sterile Al₂O₃/Ce-TZP nanocomposite sandblasted discs and coated with two types of antimicrobial glasses (materials A2 and A3) were used. Biofilms were grown on the four surfaces and evaluated after 12, 24, 48 and 72 h of incubation. Biofilms were examined by confocal laser scanning microscopy (CLSM). In addition, counts of live bacterial cells of the target species A. actinomycetemcomitans, F. nucleatum and P. gingivalis were calculated by quantitative polymerase chain reaction (qPCR) combined with propidium monoazide (PMA). For data analysis, bacterial counts were compared with a multivariate general lineal model.

RESULTS

Using CLSM, cell vitality decreased in A2 and A3. With qPCR-PMA, significant differences in vitality were observed forA. actinomycetemcomitans in A3 after 48 and 72 h of incubation. With respect to the development of the biofilms, a significant increase in counts on HA and materials A1 and A2 was observed for A. actinomycetemcomitans and F. nucleatum. Conversely, for P. gingivalis, no differences were found for HA and materials A1 and A2.

SIGNIFICANCE

Differences in biofilm formation were detected among the different tested materials. The ceramic material A3 has an effect on the vitality of A. actinomycetemcomitans growing in an in vitro biofilm model.

Dissolution and Phosphate-Induced Transformation of ZnO Nanoparticles in Synthetic Saliva Probed by AGNES without Previous Solid-Liquid Separation. Comparison with UF-ICP-MS

The variation over time of free Zn²⁺ ion concentration in stirred dispersions of ZnO nanoparticles (ZnO NPs) prepared in synthetic saliva at pH 6.80 and 37 °C was followed in situ (without solid-liquid separation step) with the electroanalytical technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping). Under these conditions, ZnO NPs are chemically unstable due to their reaction with phosphates. The initial stage of transformation (around 5-10 h) involves the formation of a metastable solid (presumably ZnHPO₄), which later evolves into the more stable hopeite phase. The overall decay rate of ZnO NPs is significantly reduced in comparison with phosphate-free background solutions of the same ionic strength and pH. The effective equilibrium solubilities of ZnO (0.29-0.47 mg·L^-1), as well as conditional excess-ligand stability constants and fractional distributions of soluble Zn species, were determined in the absence and presence of organic components. The results were compared with the conventional ultrafiltration and inductively coupled plasma-mass spectrometry (UF-ICP-MS) methodology. AGNES proves to be advantageous in terms of speed, reproducibility, and access to speciation information.

Effect of the Medium Composition on the Zn2+ Lixiviation and the Antifouling Properties of a Glass with a High ZnO Content

The dissolution of an antimicrobial ZnO-glass in the form of powder and in the form of sintered pellets were studied in water, artificial seawater, biological complex media such as common bacterial/yeast growth media (Luria Bertani (LB), yeast extract, tryptone), and human serum. It has been established that the media containing amino acids and proteins produce a high lixiviation of Zn²⁺ from the glass due to the ability of zinc and zinc oxide to react with amino acids and proteins to form complex organic compounds. The process of Zn²⁺ lixiviation from the glass network has been studied by X-ray photoelectron spectroscopy (XPS). From these results we can state that the process of lixiviation of Zn²⁺ from the glass network is similar to the one observed in sodalime glasses, where Na⁺ is lixiviated to the media first and the fraction of Zn that acts as modifiers (~2/3) is lixiviated in second place. After the subsequent collapse of the outer surface glass layer (about 200-300 nm thick layer) the dissolution process starts again. Antifouling properties against different bacteria (S. epidermidis, S. aureus, P. aeruginosa, E. coli, and M. lutea) have also been established for the glass pellets.