Experimental and numerical determination of the mechanical response of teeth with reinforced posts

Comparative Evaluation of Different Post Materials on Stress Distribution in Endodontically Treated Teeth Using the Finite Element Analysis Method: A Systematic Review

The aim of this systematic review is to summarize and conclude findings to reveal the stress ranges developed by various post materials by finite element analysis. This, in turn, aids in the selection of better post material clinically. The electronic databases PubMed and Google Scholar were searched in this review by using specific inclusion and exclusion criteria. Among 14586 articles, 22 articles were included in this systematic review, as they satisfied the eligibility criteria. The search covered all articles published from 1997 to December 2021. All records identified were retrieved and imported into the Rayyan bibliographic software, which is a systematic review screening software. Later, data extraction and analysis of 22 articles were done. Twenty-two articles, which were all finite element analysis studies, were included. Among these, 18 studies used maxillary central incisor scanned models, two studies used a maxillary canine model, and the remaining two used the mandibular premolar model for finite element analysis. All these tooth models are restored with post models made of different materials. This systematic review revealed a difference in stress distribution in endodontically treated teeth when using different post materials. Among 22 studies, 15 studies evaluated glass fiber posts and the results showed that they induce less stress on restored endodontically treated teeth when compared to other posts, with maximum stress concentration at the cervical third of the root. Prefabricated posts like stainless steel and Titanium showed more stress on the restored tooth structure with stress concentration at the cervical and apical third of the root. Prefabricated zirconia also showed more stress on the restored tooth with maximum stress concentration at the middle third of the root.

Effect of fibre posts, bone losses and fibre content on the biomechanical behaviour of endodontically treated teeth: 3D-finite element analysis

The aim of this work was to evaluate the stress distribution inside endodontically treated teeth restored with different posts (glass fibre, carbon fibre and steel posts) under different loading conditions by using a 3D-finite element analysis. The effect of masticatory and impact forces on teeth with different degrees of bone loss was analysed. The model consists of: dentine, post, cement, gutta-percha, core and crown. Four simulations were conducted with two static forces (170N horizontal and 100N oblique) and two sections constrained: 1mm (alveolar bone position in a normal periodontium) and 6mm (middle of root) below the crown. Von Mises and the principal stresses were evaluated and analysed with a 3-way ANOVA and Tukey test (α=0.05) and the effect of fibre percentage analysed. Significant differences were found among the stress values for all conditions (p<0.05). Impact load was always responsible for the most critical situation especially when the bone loss was more evident. The system with steel posts showed the highest principal stresses at the post-cement interface with horizontal load and top constraints (compressive stress of 121MPa and tensile stress of 115MPa). The use of glass posts provides a more homogeneous behaviour of the system with lower stresses. Higher fibre percentages gave higher stress in the posts. Moreover, larger bone losses are responsible for important increase in stress. Thus, this work demonstrated that periodontal disease has an important role in the success of tooth restoration after endodontic therapy, influencing the choice of post material and depth.

Inclusion of the periodontal ligament in studies on the biomechanical behavior of fiber post-retained restorations: An in vitro study and three-dimensional finite element analysis

Endodontically treated teeth are known to have reduced structural strength. Periodontal ligament may influence fracture resistance. The purpose of this study was to assess the influence of including the periodontal ligament in biomechanical studies about endodontically treated and restored teeth. Forty human maxillary central incisors were treated endodontically and randomly divided into four groups: non-crowned (with and without an artificial ligament) and crowned (with and without an artificial ligament) with glass-ceramic crowns. All groups received prefabricated glass-fiber posts and a composite resin core. Specimens were tested, under a flexural-compressive load, until failure occurred. The failure mode was registered for all specimens. The failure loads were recorded and analyzed using an analysis of variance test (p < 0.05). These results were compared with those predicted by a finite element model. The analysis of variance did not show significant differences between the use of crown on the failure load (p = 0.331) and the use of periodontal ligament (p = 0.185). A cohesive mode in crown appeared in crowned teeth and in core in non-crowned groups. For non-crowned teeth, adhesive failure occurred along the cement-enamel junction with a slight tendency in specimens without periodontal ligament. Furthermore, an unfavorable failure mode affects partially the root with no differences regarding non-crown specimens. In crowned teeth, the tendency was an adhesive failure along the cement-enamel junction. The model predicted a distribution of the safety factor consistent with these results. This study showed that inclusion of periodontal ligament is not particularly important on biomechanical behavior of post-retained restorations. However, we recommend its inclusion in fatigue studies.

Experimental strength of restorations with fibre posts at different stages, with and without using a simulated ligament

The aim of this study was to analyse the strength and failure mode of teeth restored with fibre posts under retention and flexural-compressive loads at different stages of the restoration and to analyse whether including a simulated ligament in the experimental setup has any effect on the strength or the failure mode. Thirty human maxillary central incisors were distributed in three different groups to be restored with simulation of different restoration stages (1: only post, 2: post and core, 3: post-core and crown), using Rebilda fibre posts. The specimens were inserted in resin blocks and loaded by means of a universal testing machine until failure under tension (stage 1) and 50º flexion (stages 2-3). Half the specimens in each group were restored using a simulated ligament between root dentine and resin block and the other half did not use this element. Failure in stage 1 always occurred at the post-dentine interface, with a mean failure load of 191·2 N. Failure in stage 2 was located mainly in the core or coronal dentine (mean failure load of 505·9 N). Failure in stage 3 was observed in the coronal dentine (mean failure load 397·4 N). Failure loads registered were greater than expected masticatory loads. Fracture modes were mostly reparable, thus indicating that this post is clinically valid at the different stages of restoration studied. The inclusion of the simulated ligament in the experimental system did not show a statistically significant effect on the failure load or the failure mode.