Single step fabrication of antimicrobial fibre mats from a bioengineered protein-based polymer

Elastin-like Polypeptides in Development of Nanomaterials for Application in the Medical Field

Elastin-like polypeptides (ELPs) are biopolymers formed by amino acid sequences derived from tropoelastin. These biomolecules can be soluble below critical temperatures, forming aggregates at higher temperatures, which makes them an interesting source for the design of different nanobiomaterials. These nanobiomaterials can be obtained from heterologous expression in several organisms such as bacteria, fungi, and plants. Thanks to the many advantages of ELPs, they have been used in the biomedical field to develop nanoparticles, nanofibers, and nanocomposites. These nanostructures can be used in multiple applications such as drug delivery systems, treatments of type 2 diabetes, cardiovascular diseases, tissue repair, and cancer therapy. Thus, this review aims to shed some light on the main advances in elastin-like-based nanomaterials, their possible expression forms, and importance to the medical field.

Host Defense Peptide-Mimicking Polymers and Polymeric-Brush-Tethered Host Defense Peptides: Recent Developments, Limitations, and Potential Success

Amphiphilic antimicrobial polymers have attracted considerable interest as structural mimics of host defense peptides (HDPs) that provide a broad spectrum of activity and do not induce bacterial-drug resistance. Likewise, surface engineered polymeric-brush-tethered HDP is considered a promising coating strategy that prevents infections and endows implantable materials and medical devices with antifouling and antibacterial properties. While each strategy takes a different approach, both aim to circumvent limitations of HDPs, enhance physicochemical properties, therapeutic performance, and enable solutions to unmet therapeutic needs. In this review, we discuss the recent advances in each approach, spotlight the fundamental principles, describe current developments with examples, discuss benefits and limitations, and highlight potential success. The review intends to summarize our knowledge in this research area and stimulate further work on antimicrobial polymers and functionalized polymeric biomaterials as strategies to fight infectious diseases.

Engineering Bioactive Scaffolds for Skin Regeneration

Large skin wounds pose a major clinical challenge. Scarcity of donor site and postsurgical scarring contribute to the incomplete or partial loss of function and aesthetic concerns in skin wound patients. Currently, a wide variety of skin grafts are being applied in clinical settings. Scaffolds are used to overcome the issues related to the misaligned architecture of the repaired skin tissues. The current review summarizes the contribution of biomaterials to wound healing and skin regeneration and addresses the existing limitations in skin grafting. Then, the clinically approved biologic and synthetic skin substitutes are extensively reviewed. Next, the techniques for modification of skin grafts aiming for enhanced tissue regeneration are outlined, and a summary of different growth factor delivery systems using biomaterials is presented. Considering the significant progress in biomaterial science and manufacturing technologies, the idea of biomaterial-based skin grafts with the ability for scarless wound healing and reconstructing full skin organ is more achievable than ever.

Production and Purification of Two Bioactive Antimicrobial Peptides Using a Two-Step Approach Involving an Elastin-Like Fusion Tag

Antimicrobial resistance is an increasing global threat, demanding new therapeutic biomolecules against multidrug-resistant bacteria. Antimicrobial peptides (AMPs) are promising candidates for a new generation of antibiotics, but their potential application is still in its infancy, mostly due to limitations associated with large-scale production. The use of recombinant DNA technology for the production of AMPs fused with polymer tags presents the advantage of high-yield production and cost-efficient purification processes at high recovery rates. Owing to their unique properties, we explored the use of an elastin-like recombinamer (ELR) as a fusion partner for the production and isolation of two different AMPs (ABP-CM4 and Synoeca-MP), with an interspacing formic acid cleavage site. Recombinant AMP-ELR proteins were overproduced in Escherichia coli and efficiently purified by temperature cycles. The introduction of a formic acid cleavage site allowed the isolation of AMPs, resorting to a two-step methodology involving temperature cycles and a simple size-exclusion purification step. This simple and easy-to-implement purification method was demonstrated to result in high recovery rates of bioactive AMPs. The minimum inhibitory concentration (MIC) of the free AMPs was determined against seven different bacteria of clinical relevance (Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, and two Burkholderia cenocepacia strains), in accordance with the EUCAST/CLSI antimicrobial susceptibility testing standards. All the bacterial strains (except for Pseudomonas aeruginosa) were demonstrated to be susceptible to ABP-CM4, including a resistant Burkholderia cenocepacia clinical strain. As for Synoeca-MP, although it did not inhibit the growth of Pseudomonas aeruginosa or Klebsiella pneumoniae, it was demonstrated to be highly active against the remaining bacteria. The present work provides the basis for the development of an efficient and up-scalable biotechnological platform for the production and purification of active AMPs against clinically relevant bacteria.

Protein-Engineered Polymers Functionalized with Antimicrobial Peptides for the Development of Active Surfaces

Antibacterial resistance is a major worldwide threat due to the increasing number of infections caused by antibiotic-resistant bacteria with medical devices being a major source of these infections. This suggests the need for new antimicrobial biomaterial designs able to withstand the increasing pressure of antimicrobial resistance. Recombinant protein polymers (rPPs) are an emerging class of nature-inspired biopolymers with unique chemical, physical and biological properties. These polymers can be functionalized with antimicrobial molecules utilizing recombinant DNA technology and then produced in microbial cell factories. In this work, we report the functionalization of rPBPs based on elastin and silk-elastin with different antimicrobial peptides (AMPs). These polymers were produced in Escherichia coli, successfully purified by employing non-chromatographic processes, and used for the production of free-standing films. The antimicrobial activity of the materials was evaluated against Gram-positive and Gram-negative bacteria, and results showed that the polymers demonstrated antimicrobial activity, pointing out the potential of these biopolymers for the development of new advanced antimicrobial materials.

Emerging Role of Elastin-Like Polypeptides in Regenerative Medicine

Significance: Wound dressing based on naturally derived polymer provides a useful platform for treatment of skin injuries. Owing to the high mechanical strength and tunable structural and physicochemical properties of human elastin-like polypeptides (ELPs), they may be used as excellent materials for fabricating biocompatible scaffolds and other products for wound management. Recent Advances: Designing recombinant ELPs mimicking natural elastin to fabricate synthetic polymers suitable for human health care has generated significant interest. ELP-based cell-adhesive biopolymers have been used as an alternative for successful sutureless wound closure due to the physicochemical characteristics of the extracellular matrix. Critical Issues: Different systems of ELPs are being developed in the form of scaffolds, films, hydrogels, photo-linkable sheets, and composites linked with various types of growth factors for wound healing application. However, optimizing the quality and safety attributes for specific application needs designing of recombinant ELPs with structural and functional modifications as needed for the intervention. Future Direction: Chronic wounds are difficult to treat as the wound repair process is interrupted by conditions such as excessive inflammation, impaired extracellular matrix formation, and persistent infections. Conventional therapies such as skin substitutes or autologous skin grafts, in many cases, are unable to reestablish tissue homeostasis and proper healing. The development of innovative materials could induce a better regenerative healing response. In this study, we are reviewing different types of elastin-based materials for wound care application and their future prospects in regenerative medicine.

Protein-Based Films Functionalized with a Truncated Antimicrobial Peptide Sequence Display Broad Antimicrobial Activity

The increasing bacterial resistance to antibiotics is driving strong demand for new antimicrobial biomaterials. This work describes the fabrication of free-standing films exhibiting antimicrobial properties by combining, in the same polypeptide chain, an elastin-like recombinamer comprising 200 repetitions of the pentamer VPAVG (A200) and an 18-amino-acid truncated variant of the antimicrobial peptide BMAP-28, termed BMAP-18. The fusion protein BMAP-18A200 was overexpressed and conveniently purified by a simplified and scalable nonchromatographic process. Free-standing films of BMAP-18A200 demonstrated to be stable without requiring cross-linking agents and displayed high antimicrobial activity against skin pathogens including Gram-negative and Gram-positive bacteria as well as unicellular and filamentous fungi. The antimicrobial activity of the films was mediated by direct contact of cells with the film surface, resulting in compromised structural integrity of microbial cells. Furthermore, the BMAP-18A200 films showed no cytotoxicity on normal human cell lines (skin fibroblasts and keratinocytes). All of these results highlight the potential of these biotechnological multifunctional polymers as new drug-free materials to prevent and treat microbial infections.

Strategies for recombinant production of antimicrobial peptides with pharmacological potential

INTRODUCTION

The need to develop new drugs for the control of pathogenic microorganisms has redoubled efforts to prospect for antimicrobial peptides (AMPs) from natural sources and to characterize its structure and function. These molecules present a broad spectrum of action against different microorganisms and frequently present promiscuous action, with anticancer and immunomodulatory activities. Furthermore, AMPs can be used as biopharmaceuticals in the treatment of hospital-acquired infections and other serious diseases with relevant social and economic impacts.Areas covered: The low yield and the therefore difficult extraction and purification process in AMPs are problems that limit their industrial application and scientific research. Thus, optimized heterologous expression systems were developed to significantly boost AMP yields, allow high efficiency in purification and structural optimization for the increase of therapeutic activity.Expert opinion: This review provides an update on recent developments in the recombinant production of ribosomal and non-ribosomal synthesis of AMPs and on strategies to increase the expression of genes encoding AMPs at the transcriptional and translational levels and regulation of the post-translational modifications. Moreover, there are detailed reports of AMPs that have already reached marketable status or are in the pipeline under advanced stages of preclinical testing.

Elastins-Based Antimicrobial Particles for Delivery of Bioactive Compounds

In the development of drug delivery systems, researchers pursue multifunctionality to target more complex problems, while maintaining biocompatibility and high encapsulation efficiency. Herein, we describe the preparation of noncytotoxic particles with intrinsic antimicrobial properties able to entrap bioactive compounds. The particles are composed of a recombinantly produced elastin-like recombinamer functionalized with an antimicrobial peptide, and are spontaneously formed in mild conditions by exploiting the thermoresponsiveness of the elastin-like portion. This chapter provides advice and methods for the preparation of the self-assembled antimicrobial particles, the evaluation of antimicrobial activity and cytotoxicity, and the basis to set up the methodology for the encapsulation of bioactive compounds.

Thermo-Mechanical Behaviour of Human Nasal Cartilage

The aim of this study was to undergo a comprehensive analysis of the thermo-mechanical properties of nasal cartilages for the future design of a composite polymeric material to be used in human nose reconstruction surgery. A thermal and dynamic mechanical analysis (DMA) in tension and compression modes within the ranges 1 to 20 Hz and 30 °C to 250 °C was performed on human nasal cartilage. Differential scanning calorimetry (DSC), as well as characterization of the nasal septum (NS), upper lateral cartilages (ULC), and lower lateral cartilages (LLC) reveals the different nature of the binding water inside the studied specimens. Three peaks at 60–80 °C, 100–130 °C, and 200 °C were attributed to melting of the crystalline region of collagen matrix, water evaporation, and the strongly bound non-interstitial water in the cartilage and composite specimens, respectively. Thermogravimetric analysis (TGA) showed that the degradation of cartilage, composite, and subcutaneous tissue of the NS, ULC, and LLC take place in three thermal events (~37 °C, ~189 °C, and ~290 °C) showing that cartilage releases more water and more rapidly than the subcutaneous tissue. The water content of nasal cartilage was estimated to be 42 wt %. The results of the DMA analyses demonstrated that tensile mode is ruled by flow-independent behaviour produced by the time-dependent deformability of the solid cartilage matrix that is strongly frequency-dependent, showing an unstable crystalline region between 80–180 °C, an amorphous region at around 120 °C, and a clear glass transition point at 200 °C (780 kJ/mol). Instead, the unconfined compressive mode is clearly ruled by a flow-dependent process caused by the frictional force of the interstitial fluid that flows within the cartilage matrix resulting in higher stiffness (from 12 MPa at 1 Hz to 16 MPa at 20 Hz in storage modulus). The outcomes of this study will support the development of an artificial material to mimic the thermo-mechanical behaviour of the natural cartilage of the human nose.

Antimicrobial polylysine decorated nano-structures prepared through polymerization induced self-assembly (PISA)

Polylysine decorated diblock copolymer nano-objects are prepared by polymerization-induced self-assemblyviaRAFT dispersion polymerization of 2-hydroxypropyl methacrylate. Antimicrobial properties of the resulting nano-objects evaluated using a gram positive bacteria.

Combining Catalyst-Free Click Chemistry with Coaxial Electrospinning to Obtain Long-Term, Water-Stable, Bioactive Elastin-Like Fibers for Tissue Engineering Applications

Elastic fibers are a fundamental requirement for tissue-engineered equivalents of physiologically elastic native tissues. Here, a simple one-step electrospinning approach is developed, combining i) catalyst-free click chemistry, ii) coaxial electrospinning, and iii) recombinant elastin-like polymers as a relevant class of biomaterials. Water-stable elastin-like fibers are obtained without the use of cross-linking agents, catalysts, or harmful organic solvents. The fibers can be directly exposed to an aqueous environment at physiological temperature and their morphology maintained for at least 3 months. The bioactivity of the fibers is demonstrated with human vascular cells and the potential of the process for vascular tissue engineering is shown by fabricating small-diameter tubular fibrous scaffolds. Moreover, highly porous fluffy 3D constructs are obtained without the use of specially designed collectors or sacrificial materials, further supporting their applicability in the biomedical field. Ultimately, the strategy that is developed here may be applied to other click systems, contributing to expanding their potential in medical technology.

Bioactive scaffolds based on elastin-like materials for wound healing

Wound healing is a complex process that, in healthy tissues, starts immediately after the injury. Even though it is a natural well-orchestrated process, large trauma wounds, or injuries caused by acids or other chemicals, usually produce a non-elastic deformed tissue that not only have biological reduced properties but a clear aesthetic effect. One of the main drawbacks of the scaffolds used for wound dressing is the lack of elasticity, driving to non-elastic and contracted tissues. In the last decades, elastin based materials have gained in importance as biomaterials for tissue engineering applications due to their good cyto- and bio-compatibility, their ease handling and design, production and modification. Synthetic elastin or elastin like-peptides (ELPs) are the two main families of biomaterials that try to mimic the outstanding properties of natural elastin, elasticity amongst others; although there are no in vivo studies that clearly support that these two families of elastin based materials improve the elasticity of the artificial scaffolds and of the regenerated skin. Within the next pages a review of the different forms (coacervates, fibres, hydrogels and biofunctionalized surfaces) in which these two families of biomaterials can be processed to be applied in the wound healing field have been done. Here, we explore the mechanical and biological properties of these scaffolds as well as the different in vivo approaches in which these scaffolds have been used.

Synthesis, Self-Assembly, and Biomedical Applications of Antimicrobial Peptide-Polymer Conjugates

Antimicrobial peptides (AMPs) have been attracting much attention due to their excellent antimicrobial efficiency and low rate in driving antimicrobial resistance (AMR), which has been increasing globally to alarming levels. Conjugation of AMPs into functional polymers not only preserves excellent antimicrobial activities but reduces the toxicity and offers more functionalities, which brings new insight toward developing multifunctional biomedical materials such as hydrogels, polymer vesicles, polymer micelles, and so forth. These nanomaterials have been exhibiting excellent antimicrobial activity against a broad spectrum of bacteria including multidrug-resistant (MDR) ones, high selectivity, and low cytotoxicity, suggesting promising potentials in wound dressing, implant coating, antibiofilm, tissue engineering, and so forth. This Perspective seeks to highlight the state-of-the-art strategy for the synthesis, self-assembly, and biomedical applications of AMP-polymer conjugates and explore the promising directions for future research ranging from synthetic strategies, multistage and stimuli-responsive antibacterial activities, antifungi applications, and potentials in elimination of inflammation during medical treatment. It also will provide perspectives on how to stem the remaining challenges and unresolved problems in combating bacteria, including MDR ones.