Co-deposition of gas hydrate and oil wax from water-in-crude oil emulsion saturated with CO2

Evolution of morphology and cohesive force of hydrate particles in the presence/absence of wax

In the exploitation of deep-sea oil and gas resources, the multiphase production and transportation process is frequently plagued by pipeline blockage issues. Especially when hydrates and wax coexist simultaneously, the viscosity and plugging tendency of multiphase flow systems will synergistically increase. Understanding the evolution of morphology of hydrate particles and the agglomeration characteristics of hydrate particles in the presence or absence of wax crystals is crucial to flow assurance industry. With the assistance of a visualized reactor equipped with a three axis moving platform, microscopic images of cyclopentane hydrate during hydrate growth were obtained, and the cohesive force between hydrate particles was measured. It was found that during the hydrate growth on wax-free water droplets, the untransformed water inside the particles gradually wetted the surface of the particle. With the increase in temperature and contact time, the shell of hydrate particles changed from solid and rough to smooth and moist. The cohesive force measured in this work ranges from 3.14 ± 0.52 to 11.77 ± 0.68 mN m⁻¹ with different contact times and temperature. When the contact time was 0 s and 10 s, the cohesive force between particles increased first and then stabilized with temperature. When the contact time was 20 s, the cohesive force was greater than the first two cases and showed an overall stable trend. An interesting phenomenon was also discerned: a large water bridge between particles formed during their separation process. For the wax-containing system, it required a longer time for water droplets to be converted into hydrate particles than that for wax-free systems. After wax participated in hydrate growth, hydrate particles showed the properties of elasticity and stickiness, which resulted in a larger liquid bridge between hydrate particles after their contact. It was suggested that wax crystal would alter the shell structure of hydrate particles, and change the surface properties of hydrate particles and the formation process of the liquid bridge, leading to significant and rapid increase in the cohesive force.

In the exploitation of deep-sea oil and gas resources, the multiphase production and transportation process is frequently plagued by pipeline blockage issues.

Investigation on Hydrate Growth at the Oil-Water Interface: In the Presence of Wax and Surfactant

Natural gas hydrates can readily form in deep-water-oil production processes and pose a great threat to subsea pipeline flow assurance. The usage of surfactants and hydrate antiagglomerants is a common strategy to prevent hydrate hazards. In water/wax-containing oil systems, hydrate coexisting with wax could lead to more complex and risky transportation conditions. Moreover, the effectiveness of surfactants and hydrate antiagglomerants in the presence of wax should be further evaluated. In this work, for the purpose of investigating how wax and surfactants could affect hydrate growth at the oil-water interface, a series of microexperiments was conducted in an atmospheric visual cell where the nucleation and growth of hydrates took place on a water droplet surrounded by wax-containing oils. On the basis of the experimental phenomena observed using a microscope, the formation of a hydrate shell by lateral growth, the collapse of a water droplet after hydrate initial formation, and the formation of hollow-conical hydrate crystals were identified. These experimental phenomena were closely related to the concentration of wax and surfactant used in each case. In addition, it was shown that the effectiveness of the surfactant could be weakened by wax molecules. Moreover, there existed a critical wax content above which the effectiveness of the surfactant was greatly reduced and the critical wax content gradually increased with increasing surfactant concentration. This work could provide guidance for hydrate management in wax-containing systems.

Investigation on Hydrate Growth at the Oil-Water Interface: In the Presence of Wax and Kinetic Hydrate Inhibitor

In oil industry, the coexistence of hydrate and wax can result in a severe challenge to subsea flow assurance. In order to study the effects of wax on hydrate growth at the oil-water interface, a series of microexperiments were conducted in a self-made reactor, where hydrates gradually nucleated and grew on the surface of a water droplet immersed in wax-containing oil. According to the micro-observations, hydrate shells formed at the oil-water interface in the absence of kinetic hydrate inhibitor (KHI). The roughness and growth rate of hydrate shells were analyzed, and the effects of wax were investigated. In addition, vertical growth of the hydrate shell was observed in the presence of wax, and a mechanism was proposed for illustration. In the presence of KHI, small hydrate crystals formed separately at the oil-water interface instead of hydrate shells. The presence of KHI reduced the growth rate of hydrates and changed the wettability of hydrates. Moreover, the presence of wax showed no obvious effect on the effectiveness of KHI under experimental conditions.