Ibuprofen Adsorption Study by Langmuir, Freundlich, Temkin and Dubinin-Radushkevich Models Using Nano Zinc Oxide from Mild Hydrothermal Condition

Design of composite chitosan/algae/zeolite by freeze- or air-drying: A comparative adsorbent analysis for optimized removal of brilliant green dye

A bio-composite material was developed that contains chitosan, food-grade algae, and zeolite for the removal of brilliant green (BG) dye. The synthesized bio-composite was dried via two different methods (air-drying; AD, and freeze-drying; FD). The physicochemical characterization of air-dried chitosan-algae-zeolite (Cs-Alg-Zl-AD) and freeze-dried chitosan-algae-zeolite (Cs-Alg-Zl-FD) were investigated by spectroscopy (FTIR, SEM-EDX, and XPS), diffraction (XRD), surface charge via pHpzc, specific surface area (SSA) and elemental analyses. The utilization of Box-Behnken Design (BBD) was intended to optimize the three input variables, which are adsorbent dosage, pH of medium, and contact time. The adsorption optimization process yielded optimal conditions, which were verified through a desirability test and implemented in batch-mode equilibrium experiments. The Cs-Alg-Zl-FD has a higher specific surface area (SSA = 3.29 m2/g) compared to Cs-Alg-Zl-AD (SSA = 1.79 m2/g). The Cs-Alg-Zl-FD shows greater adsorptive removal of BG (98.6 %) over Cs-Alg-Zl-AD (88.6 %), in parallel agreement with differences in the SSA. Moreover, the maximum BG dye adsorption capacities of Cs-Alg-Zl-FD (119.5 mg/g) and Cs-Alg-Zl-AD (108 mg/g) at pH = 8.1 and 25 °C. The Freundlich model fits best with Cs-Alg-Zl-AD while Langmuir and Temkin models account for the Cs-Alg-Zl-FD dye adsorption. The Cs-Alg-Zl-FD shows greater dye adsorption over four adsorption cycles, as compared with the Cs-Alg-Zl-AD.

Adsorption of anionic and cationic dyes in aqueous solution by a sustainable and low-cost activated carbon based on argan solid waste treated with H3PO4

The objective of this work is to study the adsorption capacity of a natural and low-cost material prepared from argan waste treated with H3PO4 towards two dyes of different molecular charges and presenting an acute toxicity, the methyl orange (MO, anionic dye) and the methylene blue (MB, cationic dye). The prepared adsorbent was characterized by SEM, EDX, FTIR, and BET specific surface. These analyses showed the presence of C (42%), O (55%), and P (3%) and a remarkable difference between the morphology of the precursor and that of the obtained material with a specific surface of 475 m2/g and a very porous structure as well as the main functional groups, O-H, C=O, and C-H. The influence of the pH showed a maximum adsorption at pH =2 for MO and at pH = 10 for MB. Investigation of the effect of time on the adsorption of anionic and cationic dyes revealed that the contact time at equilibrium was 240 and 180 min, respectively. The isotherms that best fit the adsorption of MO and MB are the Langmuir model and the Freundlich model respectively. The kinetic study showed that the experimental data are in agreement with the pseudo-second-order model. Regeneration of the saturated material was also studied for the probability of reusing the adsorbent in many experiments. The valorization of argan waste into activated carbon using H3PO4 has allowed to obtain an effective adsorbent for the removal of anionic and cationic dyes and create an added value for environmental sustainability.

Hydrothermal effect of gunningite use Pluronic F127-GELATIN as template and the ibuprofen adsorption performance

The gunningite has been successfully synthesized using Pluronic F127 and gelatin as template via hydrothermal at 100-200 °C for 12-48 h. By scanning electron microscopy, nitrogen adsorption-desorption, and X-ray diffraction, changes in structure, pore size, and morphology due to ibuprofen adsorption were investigated in gunningite. Various hydrothermal (temperature and time) parameters had an influence on the percentage elimination (%) of ibuprofens. Gunningite's specific surface area intensifies from 14.60 to 24.03 m²/g as the longer hydrothermal time. In batch adsorption studies, the resulting sample was conducted to isotherm and kinetic analysis to evaluate the distribution of ibuprofen between the liquid and solid phases. Pseudo-first-order kinetics with an adsorption capacity range of 27-34.5 mg g^-1 were the best fit for the observed data. Consequently, gunningite may be considered a viable adsorbent for the large-scale treatment of water contaminated with ibuprofen and related anti-inflammatory medicines.

Removal of ibuprofen from aqueous media by adsorption: A comprehensive review

Ibuprofen (IBP) is a non-steroidal anti-inflammatory drug released into the environment through hospital and medical effluents, pharmaceutical wastewater and veterinary use. The aim of this paper is to review the empirical findings on the adsorption of IBP from aqueous media. A preliminary ecotoxicological assessment confirmed the environmental risk of IBP in the aqueous environment. Open literature works considered in this review were for the past decade (2010-2020). Carbon-based adsorbents are the best class of adsorbent for the uptake of IBP and the highest reported maximum adsorption capacity (qmax) for IBP is 496.1 mg/g by SWCNTs. The range of adsorption capacities for IBP uptake in this review is between 0.0496 and 496.1 mg/g. The mechanism of uptake is majorly by hydrophobic interactions, π - π stacking, hydrogen bonds, electrostatic interactions and dipole-dipole interaction. IBP uptake was best fit to a wide variety of isotherm models but was well suited to the pseudo-second order kinetics model. The thermodynamics of IBP uptake depends majorly on the nature of the adsorbent and desorption from the solid phase is based on an appropriate choice of the eluent. Knowledge gaps were observed in used adsorbent disposal and process improvement. In the future, interest would increase in scale-up, industrial applications and practical utilisation of the research findings which would help in sustainable water resource management.