Generation of bioartificial heart tissue by combining a three-dimensional gel-based cardiac construct with decellularized small intestinal submucosa

3D bioprinting for organ and organoid models and disease modeling

INTRODUCTION

3D printing, a versatile additive manufacturing technique, has diverse applications ranging from transportation, rapid prototyping, clean energy, and medical devices.

AREAS COVERED

The authors focus on how 3D printing technology can enhance the drug discovery process through automating tissue production that enables high-throughput screening of potential drug candidates. They also discuss how the 3D bioprinting process works and what considerations to address when using this technology to generate cell laden constructs for drug screening as well as the outputs from such assays necessary for determining the efficacy of potential drug candidates. They focus on how bioprinting how has been used to generate cardiac, neural, and testis tissue models, focusing on bio-printed 3D organoids.

EXPERT OPINION

The next generation of 3D bioprinted organ model holds great promises for the field of medicine. In terms of drug discovery, the incorporation of smart cell culture systems and biosensors into 3D bioprinted models could provide highly detailed and functional organ models for drug screening. By addressing current challenges of vascularization, electrophysiological control, and scalability, researchers can obtain more reliable and accurate data for drug development, reducing the risk of drug failures during clinical trials.

Sterilization and disinfection methods for decellularized matrix materials: Review, consideration and proposal

Sterilization is the process of killing all microorganisms, while disinfection is the process of killing or removing all kinds of pathogenic microorganisms except bacterial spores. Biomaterials involved in cell experiments, animal experiments, and clinical applications need to be in the aseptic state, but their physical and chemical properties as well as biological activities can be affected by sterilization or disinfection. Decellularized matrix (dECM) is the low immunogenicity material obtained by removing cells from tissues, which retains many inherent components in tissues such as proteins and proteoglycans. But there are few studies concerning the effects of sterilization or disinfection on dECM, and the systematic introduction of sterilization or disinfection for dECM is even less. Therefore, this review systematically introduces and analyzes the mechanism, advantages, disadvantages, and applications of various sterilization and disinfection methods, discusses the factors influencing the selection of sterilization and disinfection methods, summarizes the sterilization and disinfection methods for various common dECM, and finally proposes a graphical route for selecting an appropriate sterilization or disinfection method for dECM and a technical route for validating the selected method, so as to provide the reference and basis for choosing more appropriate sterilization or disinfection methods of various dECM.

•

Asepsis is the prerequisite for the experiment and application of biomaterials.

•

Sterilization or disinfection affects physic-chemical properties of biomaterials.

•

Mechanism, advantages and disadvantages of sterilization or disinfection methods.

•

Factors influencing the selection of sterilization or disinfection methods.

•

Selection of sterilization or disinfection methods for decellularized matrix.

Engineering Human Cardiac Muscle Patch Constructs for Prevention of Post-infarction LV Remodeling

Tissue engineering combines principles of engineering and biology to generate living tissue equivalents for drug testing, disease modeling, and regenerative medicine. As techniques for reprogramming human somatic cells into induced pluripotent stem cells (iPSCs) and subsequently differentiating them into cardiomyocytes and other cardiac cells have become increasingly efficient, progress toward the development of engineered human cardiac muscle patch (hCMP) and heart tissue analogs has accelerated. A few pilot clinical studies in patients with post-infarction LV remodeling have been already approved. Conventional methods for hCMP fabrication include suspending cells within scaffolds, consisting of biocompatible materials, or growing two-dimensional sheets that can be stacked to form multilayered constructs. More recently, advanced technologies, such as micropatterning and three-dimensional bioprinting, have enabled fabrication of hCMP architectures at unprecedented spatiotemporal resolution. However, the studies working on various hCMP-based strategies for in vivo tissue repair face several major obstacles, including the inadequate scalability for clinical applications, poor integration and engraftment rate, and the lack of functional vasculature. Here, we review many of the recent advancements and key concerns in cardiac tissue engineering, focusing primarily on the production of hCMPs at clinical/industrial scales that are suitable for administration to patients with myocardial disease. The wide variety of cardiac cell types and sources that are applicable to hCMP biomanufacturing are elaborated. Finally, some of the key challenges remaining in the field and potential future directions to address these obstacles are discussed.

Characterization of Tissue Engineered Endothelial Cell Networks in Composite Collagen-Agarose Hydrogels

Scaffolds constitute an important element in vascularized tissues and are therefore investigated for providing the desired mechanical stability and enabling vasculogenesis and angiogenesis. In this study, supplementation of hydrogels containing either Matrigel^TM and rat tail collagen I (Matrigel^TM/rCOL) or human collagen (hCOL) with SeaPlaque^TM agarose were analyzed with regard to construct thickness and formation and characteristics of endothelial cell (EC) networks compared to constructs without agarose. Additionally, the effect of increased rCOL content in Matrigel^TM/rCOL constructs was studied. An increase of rCOL content from 1 mg/mL to 3 mg/mL resulted in an increase of construct thickness by approximately 160%. The high rCOL content, however, impaired the formation of an EC network. The supplementation of Matrigel^TM/rCOL with agarose increased the thickness of the hydrogel construct by approximately 100% while supporting the formation of a stable EC network. The use of hCOL/agarose composite hydrogels led to a slight increase in the thickness of the 3D hydrogel construct and supported the formation of a multi-layered EC network compared to control constructs. Our findings suggest that agarose/collagen-based composite hydrogels are promising candidates for tissue engineering of vascularized constructs as cell viability is maintained and the formation of a stable and multi-layered EC network is supported.

Decellularized Aortic Scaffold Alleviates H2O2-Induced Inflammation and Apoptosis in CD34+ Progenitor Cells While Driving Neovasculogenesis

Bone marrow-derived stem/progenitor cells have been utilized for cardiac or vascular repair after ischemic injury, but they are subject to apoptosis and immune rejection in the ischemic site. Multiple scaffolds were used as delivery tools to transplant stem/progenitor cells; however, these scaffolds did not show intrinsically antiapoptotic or anti-inflammatory properties. Decellularized aortic scaffolds that facilitate cell delivery and tissue repair were prepared by removing cells of patient-derived aortic tissues. Scanning electron microscopy (SEM) showed cells attached well to the scaffold after culturing for 5 days. Live/dead staining showed most seeded cells survived at day 7 on a decellularized aortic scaffold. Ki67 staining demonstrated that decellularized aortic scaffold promoted proliferation of bone marrow-derived CD34+ progenitor cells. Apoptosis of CD34+ progenitor cells induced by H₂O₂ at high concentration was significantly alleviated in the presence of decellularized aortic scaffolds, demonstrating a protective effect against oxidative stress-induced apoptosis. Furthermore, decellularized aortic scaffolds significantly reduced the expression of proinflammatory cytokines (IL-8, GM-CSF, MIP-1β, GRO-α, Entoxin, and GRO) concurrently with an increase in anti-inflammatory cytokines (IL-2 and TGF-β) released from CD34+ progenitor cells when exposed to H₂O₂ at low concentration. Finally, neovascularization was observed by H&E and immunohistochemical staining 14 days after the decellularized aortic scaffolds were subcutaneously implanted in nude mice. This preclinical study demonstrates that the use of a decellularized aortic scaffold possessing antiapoptotic and anti-inflammatory properties may represent a promising strategy for cardiovascular repair after ischemic injury.

Generation of a large-scale vascular bed for the in vitro creation of three-dimensional cardiac tissue

Introduction

The definitive treatment for severe heart failure is transplantation. However, only a small number of heart transplants are performed each year due to donor shortages. Therefore, novel treatment approaches based on artificial organs or regenerative therapy are being developed as alternatives. We have developed a technology known as cell sheet-based tissue engineering that enables the fabrication of functional three-dimensional (3D) tissue. Here, we report a new technique for engineering human cardiac tissue with perfusable blood vessels. Our method involved the layering of cardiac cell sheets derived from human induced pluripotent stem cells (hiPSCs) on a vascular bed derived from porcine small intestinal tissue.

Methods

For the vascular bed, a segment of porcine small intestine was harvested together with a branch of the superior mesenteric artery and a branch of the superior mesenteric vein. The small intestinal tissue was incised longitudinally, and the mucosa was resected. Human cardiomyocytes derived from hiPSCs were co-cultured with endothelial cells and fibroblasts on a temperature-responsive dish and harvested as a cardiac cell sheet. A triple-layer of cardiac cell sheets was placed onto the vascular bed, and the resulting construct was subjected to perfusion culture in a bioreactor system.

Results

The cardiac tissue on the vascular bed pulsated spontaneously and synchronously after one day of perfusion culture. Electrophysiological recordings revealed regular action potentials and a beating rate of 105 ± 13/min (n = 8). Furthermore, immunostaining experiments detected partial connection of the blood vessels between the vascular bed and cardiac cell sheets.

Conclusions

We succeeded in engineering spontaneously beating 3D cardiac tissue in vitro using human cardiac cell sheets and a vascular bed derived from porcine small intestine. Further development of this method might allow the fabrication of functional cardiac tissue that could be used in the treatment of severe heart failure.

Formation of three-dimensional tubular endothelial cell networks under defined serum-free cell culture conditions in human collagen hydrogels

Implementation of tubular endothelial cell networks is a prerequisite for 3D tissue engineering of constructs with clinically relevant size as nourishment of cells is challenged by the diffusion limit. In vitro generation of 3D networks is often achieved under conditions using serum containing cell culture medium and/or animal derived matrices. Here, 3D endothelial cell networks were generated by using human umbilical vein endothelial cells (HUVECs) in combination with human adipose tissue derived stromal cells (hASCs) employing human collagen I as hydrogel and decellularized porcine small intestinal submucosa as starter matrix. Matrigel/rat tail collagen I hydrogel was used as control. Resulting constructs were cultivated either in serum-free medium or in endothelial growth medium-2 serving as control. Endothelial cell networks were quantified, tested for lumen formation, and interaction of HUVECs and hASCs. Tube diameter was slightly larger in constructs containing human collagen I compared to Matrigel/rat tail collagen I constructs under serum-free conditions. All other network parameters were mostly similar. Thereby, the feasibility of generating 3D endothelial cell networks under serum-free culture conditions in human collagen I as hydrogel was demonstrated. In summary, the presented achievements pave the way for the generation of clinical applicable constructs.

Myocardial Tissue Engineering for Regenerative Applications

PURPOSE OF REVIEW

This review provides an overview of the current state of tissue-engineered heart repair with a special focus on the anticipated modes of action of tissue-engineered therapy candidates and particular implications as to transplant immunology.

RECENT FINDINGS

Myocardial tissue engineering technologies have made tremendous advances in recent years. Numerous different strategies are under investigation and have reached different stages on their way to clinical translation. Studies in animal models demonstrated that heart repair requires either remuscularization by delivery of bona fide cardiomyocytes or paracrine support for the activation of endogenous repair mechanisms. Tissue engineering approaches result in enhanced cardiomyocyte retention and sustained remuscularization, but may also be explored for targeted paracrine or mechanical support. Some of the more advanced tissue engineering approaches are already tested clinically; others are at late stages of pre-clinical development. Process optimization towards cGMP compatibility and clinical scalability of contractile engineered human myocardium is an essential step towards clinical translation. Long-term allograft retention can be achieved under immune suppression. HLA matching may be an option to enhance graft retention and reduce the need for comprehensive immune suppression. Tissue-engineered heart repair is entering the clinical stage of the translational pipeline. Like in any effective therapy, side effects must be anticipated and carefully controlled. Allograft implantation under immune suppression is the most likely clinical scenario. Strategies to overcome transplant rejection are evolving and may further boost the clinical acceptance of tissue-engineered heart repair.

Tissue Engineering of Vein Valves Based on Decellularized Natural Matrices

Valvular repair or transplantation, designed to restore the venous valve function of the legs, has been proposed as treatment in chronic venous insufficiency. Available grafts or surgeries have provided limited durability so far. Generating venous valve substitutes by means of tissue engineering could be a solution. We generated decellularized jugular ovine vein conduits containing valves (oVVC) after reseeding with ovine endothelial cells differentiated from peripheral blood-derived endothelial cells (oPBEC), cultivated in vitro corresponding to the circulatory situation in the lower leg at rest and under exertion. oVVC were decellularized by detergent treatment. GFP-labeled oPBEC were seeded onto the luminal side of the decellularized oVVC and cultivated under static-rotational conditions for 6 h (group I) and 12 h (group II), respectively. Reseeded matrices of group I were exposed to continuous low flow conditions (“leg at rest”). The tissues of group II were exposed to a gradually increasing flow (“leg under effort”). After 5 days, the grafts of group I revealed a uniform luminal endothelial cell coverage of the examined areas of the venous walls and adjacent venous valve leaflets. In group II, the cell coverage on luminal areas of the venous wall parts was found to be nearly complete. The endothelial cell coverage of adjacent venous valve leaflets was revealed to be less dense and confluent. Endothelial cells cultured on acellular vein tissues of both groups were distinctly orientated uniformly in the flow direction, clearly creating a stable and flow-orientated layer. Thus, an endothelium could successfully be reestablished on the luminal surface of a decellularized venous valve by seeding peripheral blood endothelial cells and culturing under different conditions.

Modulation of cardiomyocyte activity using pulsed laser irradiated gold nanoparticles

Can photothermal gold nanoparticle mediated laser manipulation be applied to induce cardiac contraction? Based on our previous work, we present a novel concept of cell stimulation. A 532 nm picosecond laser was employed to heat gold nanoparticles on cardiomyocytes. This leads to calcium oscillations in the HL-1 cardiomyocyte cell line. As calcium is connected to the contractility, we aimed to alter the contraction rate of native and stem cell derived cardiomyocytes. A contraction rate increase was particularly observed in calcium containing buffer with neonatal rat cardiomyocytes. Consequently, the study provides conceptual ideas for a light based, nanoparticle mediated stimulation system.

Viability and proliferation of endothelial cells upon exposure to GaN nanoparticles

Nanotechnology is a rapidly growing and promising field of interest in medicine; however, nanoparticle-cell interactions are not yet fully understood. The goal of this work was to examine the interaction between endothelial cells and gallium nitride (GaN) semiconductor nanoparticles. Cellular viability, adhesion, proliferation, and uptake of nanoparticles by endothelial cells were investigated. The effect of free GaN nanoparticles versus the effect of growing endothelial cells on GaN functionalized surfaces was examined. To functionalize surfaces with GaN, GaN nanoparticles were synthesized on a sacrificial layer of zinc oxide (ZnO) nanoparticles using hydride vapor phase epitaxy. The uptake of GaN nanoparticles by porcine endothelial cells was strongly dependent upon whether they were fixed to the substrate surface or free floating in the medium. The endothelial cells grown on surfaces functionalized with GaN nanoparticles demonstrated excellent adhesion and proliferation, suggesting good biocompatibility of the nanostructured GaN.

Fabrication of Biodegradable Synthetic Vascular Networks and Their Use as a Model of Angiogenesis

One of the greatest challenges currently faced in tissue engineering is the incorporation of vascular networks within tissue-engineered constructs. The aim of this study was to develop a technique for producing a perfusable, 3-dimensional, cell-friendly model of vascular structures that could be used to study the factors affecting angiogenesis and vascular biology in engineered systems in more detail. Initially, biodegradable synthetic pseudovascular networks were produced via the combination of robocasting and electrospinning techniques. The internal surfaces of the vascular channels were then recellularized with human dermal microvascular endothelial cells (HDMECs) with and without the presence of human dermal fibroblasts (HDFs) on the outer surface of the scaffold. After 7 days in culture, channels that had been reseeded with HDMECs alone demonstrated irregular cell coverage. However, when using a co-culture of HDMECs inside and HDFs outside the vascular channels, coverage was found to be continuous throughout the internal channel. Using this cell combination, collagen gels loaded with vascular endothelial growth factor were deposited onto the outer surface of the scaffold and cultured for a further 7 days. After this, endothelial cell outgrowth from within the channels into the collagen gel was observed, showing that the engineered vasculature maintains its capacity for angiogenesis. Furthermore, the HDMECs appeared to have formed perfusable tubules within the gel. These results show promising steps towards the development of an in vitro platform for studying angiogenesis and vascular biology in a tissue engineering context.

Heart Regeneration with Embryonic Cardiac Progenitor Cells and Cardiac Tissue Engineering

Myocardial infarction (MI) is the leading cause of death worldwide. Recent advances in stem cell research hold great potential for heart tissue regeneration through stem cell-based therapy. While multiple cell types have been transplanted into MI heart in preclinical studies or clinical trials, reduction of scar tissue and restoration of cardiac function have been modest. Several challenges hamper the development and application of stem cell-based therapy for heart regeneration. Application of cardiac progenitor cells (CPCs) and cardiac tissue engineering for cell therapy has shown great promise to repair damaged heart tissue. This review presents an overview of the current applications of embryonic CPCs and the development of cardiac tissue engineering in regeneration of functional cardiac tissue and reduction of side effects for heart regeneration. We aim to highlight the benefits of the cell therapy by application of CPCs and cardiac tissue engineering during heart regeneration.

Tissue-engineered mitral valve: morphology and biomechanics †

OBJECTIVES

The present study aimed at developing tissue-engineered mitral valves based on cell-free ovine mitral allografts.

METHODS

The ovine mitral valves (OMVs) (n = 46) were harvested in the local slaughter house. They were decellularized using detergent solutions and DNase. The effectiveness of decellularization was assessed by histological (haematoxylin-eosin, Movat's pentachrome) and immunofluorescent staining (for DNA and α-Gal), and DNA-quantification. To reveal the receptiveness of decellularized tissue to endothelial cells (ECs), the valve leaflets were reseeded with ovine ECs, derived from endothelial progenitor cells in vitro. For assessment of biomechanical properties, uniaxial tensile tests were carried out.

RESULTS

Histology and immunofluorescent staining revealed absence of cell nuclei in decellularized leaflets, chordae and papillary muscles. According to the software for immunofluorescence analysis, reduction in DNA and α-Gal was 99.9 and 99.6%, respectively. DNA-quantification showed 71.2% reduction in DNA content without DNase and 96.4% reduction after DNase treatment. Decellularized leaflets were comparable with native in ultimate tensile strain (native, 0.34 ± 0.09 mm/mm, vs decellularized, 0.44 ± 0.1 mm/mm; P = 0.09), and elastin modulus (native, 0.39 ± 0.27, vs decellularized, 0.57 ± 0.55, P = 0.46), had increased ultimate tensile stress (native, 1.23 ± 0.35 MPa, vs decellularized 2.12 ± 0.43 MPa; P = 0.001) and collagen modulus (native, 5.5 ± 1.26, vs decellularized, 8.29 ± 2.9; P = 0.04). After EC seeding, immunofluorescent staining revealed a monolayer of CD31-, eNOS- and vWF-positive cells on the surface of the leaflet, as well as a typical cobble-stone morphology of those cells.

CONCLUSIONS

Decellularization of ovine mitral valve results in a mitral valves scaffold with mechanical properties comparable with native tissue, and a graft surface, which can be repopulated by endothelial cells.

Tissue engineering approaches to heart repair

The heart is a large organ containing many cell types, each of which is necessary for normal function. Because of this, cardiac regenerative medicine presents many unique challenges. Because each of the many types of cells within the heart has unique physiological and electrophysiological characteristics, donor cells must be well matched to the area of the heart into which they are grafted to avoid mechanical dysfunction or arrhythmia. In addition, grafted cells must be functionally integrated into host tissue to effectively repair cardiac function. Because of its size and physiological function, the metabolic needs of the heart are considerable. Therefore grafts must contain not only cardiomyocytes but also a functional vascular network to meet their needs for oxygen and nutrition. In this article we review progress in the use of pluripotent stem cells as a source of donor cardiomyocytes and highlight current unmet needs in the field. We also examine recent tissue engineering approaches integrating cells with various engineered materials that should address some of these unmet needs.