Comparison of Poly(l-lactide-co-ɛ-caprolactone) and Poly(trimethylene carbonate) Membranes for Urethral Regeneration: An In Vitro and In Vivo Study

The Regenerative Microenvironment of the Tissue Engineering for Urethral Strictures

Urethral stricture caused by various reasons has threatened the quality of life of patients for decades. Traditional reconstruction methods, especially for long-segment injuries, have shown poor outcomes in treating urethral strictures. Tissue engineering for urethral regeneration is an emerging concept in which special designed scaffolds and seed cells are used to promote local urethral regeneration. The scaffolds, seed cells, various factors and the host interact with each other and form the regenerative microenvironment. Among the various interactions involved, vascularization and fibrosis are the most important biological processes during urethral regeneration. Mesenchymal stem cells and induced pluripotent stem cells play special roles in stricture repair and facilitate long-segment urethral regeneration, but they may also induce carcinogenesis and genomic instability during reconstruction. Nevertheless, current technologies, such as genetic engineering, molecular imaging, and exosome extraction, provide us with opportunities to manage seed cell-related regenerative risks. In this review, we described the interactions among seed cells, scaffolds, factors and the host within the regenerative microenvironment, which may help in determining the exact molecular mechanisms involved in urethral stricture regeneration and promoting clinical trials and the application of urethral tissue engineering in patients suffering from urethral stricture.

Trilayer composite scaffold for urethral reconstruction:in vitroevaluation of mechanical, biological, and angiogenic properties

Regeneration of damaged urethral tissue remains a major challenge in the field of lower urinary tract reconstruction. To address this issue, various synthetic and natural biodegradable biomaterials are currently being explored for the fabrication of scaffolds that promote urethral regeneration and healing. In this study, we present an approach to fabricate a trilayer hybrid scaffold comprising a central layer of poly(lactic acid) (PLA) between two layers of chitosan. The chitosan/PLA/chitosan (CPC) scaffolds were fabricated by a sequential electrospinning process and their properties were evaluated for their suitability for urethral tissue engineering. The physical and biological properties of the CPC scaffolds were evaluated in comparison to electrospun PLA scaffolds and acellular dermis (Alloderm) as controls for a synthetic and a natural scaffold, respectively. Compared to the controls, the CPC scaffolds exhibited higher elastic modulus and ultimate tensile strength, while maintaining extensibility and suture retention strength appropriate for clinical use. The CPC scaffolds displayed significant hydrophilicity, which was associated with a higher water absorption capacity of the chitosan nanofibres. The degradation products of the CPC scaffolds did not exhibit cytotoxicity and promoted wound closure by fibroblastsin vitro. In addition, CPC scaffolds showed increased growth of smooth muscle cells, an essential component for functional regeneration of urethral tissue. Furthermore, in a chicken embryo-based assay, CPC scaffolds demonstrated significantly higher angiogenic potential, indicating their ability to promote vascularisation, a crucial aspect for successful urethral reconstruction. Overall, these results suggest that CPC hybrid scaffolds containing both natural and synthetic components offer significant advantages over conventional acellular or synthetic materials alone. CPC scaffolds show promise as potential candidates for further research into the reconstruction of the urethrain vivo.

Ascorbic Acid 2-Phosphate Releasing Supercritically Foamed Porous Poly-L-Lactide-Co-ε-Caprolactone Scaffold Enhances the Collagen Production of Human Vaginal Stromal Cells: A New Approach for Vaginal Tissue Engineering

BACKGROUND

The reconstructive surgery of vaginal defects is highly demanding and susceptible to complications, especially in larger defects requiring nonvaginal tissue grafts. Thus, tissue engineering-based solutions could provide a potential approach to the reconstruction of vaginal defects.

METHODS

Here, we evaluated a novel porous ascorbic acid 2-phosphate (A2P)-releasing supercritical carbon dioxide foamed poly-L-lactide-co-ε-caprolactone (scPLCLA2P) scaffold for vaginal reconstruction with vaginal epithelial (EC) and stromal (SC) cells. The viability, proliferation, and phenotype of ECs and SCs were evaluated in monocultures and in cocultures on d 1, d 7 and d 14. Furthermore, the collagen production of SCs on scPLCLA2P was compared to that on scPLCL without A2P on d 14.

RESULTS

Both ECs and SCs maintained their viability on the scPLCLA2P scaffold in mono- and coculture conditions, and the cells maintained their typical morphology during the 14-d culture period. Most importantly, the scPLCLA2P scaffolds supported the collagen production of SCs superior to plain scPLCL based on total collagen amount, collagen I and III gene expression results and collagen immunostaining results.

CONCLUSION

This is the first study evaluating the effect of A2P on vaginal tissue engineering, and the results are highly encouraging, indicating that scPLCLA2P has potential as a scaffold for vaginal tissue engineering.

Ascorbic Acid 2-Phosphate-Releasing Supercritical Carbon Dioxide-Foamed Poly(L-Lactide-Co-epsilon-Caprolactone) Scaffolds Support Urothelial Cell Growth and Enhance Human Adipose-Derived Stromal Cell Proliferation and Collagen Production

Tissue engineering can provide a novel approach for the reconstruction of large urethral defects, which currently lacks optimal repair methods. Cell-seeded scaffolds aim to prevent urethral stricture and scarring, as effective urothelium and stromal tissue regeneration is important in urethral repair. In this study, the aim was to evaluate the effect of the novel porous ascorbic acid 2-phosphate (A2P)-releasing supercritical carbon dioxide-foamed poly(L-lactide-co-ε-caprolactone) (PLCL) scaffolds (scPLCLA2P) on the viability, proliferation, phenotype maintenance, and collagen production of human urothelial cell (hUC) and human adipose-derived stromal cell (hASC) mono- and cocultures. The scPLCLA2P scaffold supported hUC growth and phenotype both in monoculture and in coculture. In monocultures, the proliferation and collagen production of hASCs were significantly increased on the scPLCLA2P compared to scPLCL scaffolds without A2P, on which the hASCs formed nonproliferating cell clusters. Our findings suggest the A2P-releasing scPLCLA2P to be a promising material for urethral tissue engineering.

Sources, Selection, and Microenvironmental Preconditioning of Cells for Urethral Tissue Engineering

Urethral stricture is a common urinary tract disorder in men that can be caused by iatrogenic causes, trauma, inflammation, or infection and often requires reconstructive surgery. The current therapeutic approach for complex urethral strictures usually involves reconstruction with autologous tissue from the oral mucosa. With the goal of overcoming the lack of sufficient autologous tissue and donor site morbidity, research over the past two decades has focused on cell-based tissue-engineered substitutes. While the main focus has been on autologous cells from the penile tissue, bladder, and oral cavity, stem cells from sources such as adipose tissue and urine are competing candidates for future urethral regeneration due to their ease of collection, high proliferative capacity, maturation potential, and paracrine function. This review addresses the sources, advantages, and limitations of cells for tissue engineering in the urethra and discusses recent approaches to improve cell survival, growth, and differentiation by mimicking the mechanical and biophysical properties of the extracellular environment.

Electrospun PLGA and PLGA/gelatin scaffolds for tubularized urethral replacement: Studies in vitro and in vivo

To investigate the biocompatibility of polylactic acid-glycolic acid copolymer (PLGA) and PLGA/gelatin scaffolds and their suitability for tubular urethral replacement in a canine model. PLGA and PLGA/gelatin scaffolds was constructed by electrospinning. Microstructural differences between the scaffolds was examined by Scanning electron microscopy (SEM) followed by mechanical properties testing. Biocompatibility of the material was evaluated using SEM 4, 8, 12 and 72 h after PLGA and PLGA/gelatin scaffolds co-culture with urothelial cells. And confocal analysis was also used to showed the cell adhesive and growth at 12 h. Approximately 2 cm of the anterior urethra of twelve dogs were removed and replaced with a scaffold. After the surgery for 1 month performed urethrography and for 3 month perform hematoxylin-eosin (H&E) and Masson. The results indicated that PLGA and PLGA/gelatin scaffolds had a void microfilament structure, similar to that of normal acellular matrix tissue. And the tensile strength was decreased whereas the tensile deformation and suture retention strength was increased in PLGA/gelatin scaffolds compared to that in PLGA scaffolds Urothelial cells grew well on both scaffolds. Postoperatively, animals recovered well and urinated spontaneously. However, urethrography showed varying degrees of urethral strictures in the reconstructed urethras. H&E and Masson showed that multilayer urothelial cells were formed in both the proximal and distal segments of the reconstructed urethras but without continuity. There was a small amount of smooth muscle and blood vessels under the epithelium, but regenerative urothelial cells at the midpoint of the reconstructed segment did not continue. Lots of lymphocyte infiltration was observed under the epithelium, some collagen tissue was deposited under the neo-urethral epithelium were observed. In conclusion, PLGA and PLGA/gelatin scaffolds are not suitable for tubularized urethral replacement in the canine model.

Surface activation with oxygen plasma promotes osteogenesis with enhanced extracellular matrix formation in three-dimensional microporous scaffolds

Various types of synthetic polyesters have been developed as biomaterials for tissue engineering. These materials commonly possess biodegradability, biocompatibility, and formability, which are preferable properties for bone regeneration. The major challenge of using synthetic polyesters is the result of low cell affinity due to their hydrophobic nature, which hinders efficient cell seeding and active cell dynamics. To improve wettability, plasma treatment is widely used in industry. Here, we performed surface activation with oxygen plasma to hydrophobic copolymers, poly(l-lactide-co-trimethylene carbonate), which were shaped in 2D films and 3D microporous scaffolds, and then we evaluated the resulting surface properties and the cellular responses of rat bone marrow stem cells (rBMSC) to the material. Using scanning electron microscopy and Fourier-transform infrared spectroscopy, we demonstrated that short-term plasma treatment increased nanotopographical surface roughness and wettability with minimal change in surface chemistry. On treated surfaces, initial cell adhesion and elongation were significantly promoted, and seeding efficiency was improved. In an osteoinductive environment, rBMSC on plasma-treated scaffolds exhibited accelerated osteogenic differentiation with osteogenic markers including RUNX2, osterix, bone sialoprotein, and osteocalcin upregulated, and a greater amount of collagen matrix and mineral deposition were found. This study shows the utility of plasma surface activation for polymeric scaffolds in bone tissue engineering.

AK, Pennisi CP. Quality of Reporting in Preclinical Urethral Tissue Engineering Studies: A Systematic Review to Assess Adherence to the ARRIVE Guidelines

Preclinical research within the area of urethral tissue engineering has not yet been successfully translated into an efficient therapeutic option for patients. This gap could be attributed, in part, to inadequate design and reporting of the studies employing laboratory animals. In this study, a systematic review was conducted to investigate the quality of reporting in preclinical studies utilizing tissue engineering approaches for urethral repair. The scope was on studies performed in rabbits, published between January 2014 and March 2020. Quality assessment of the data was conducted according to the Animal Research: Reporting of in Vivo Experiments (ARRIVE) guidelines by the scoring of a 38-item checklist in different categories. A total of 28 articles that fulfilled the eligibility criteria were included in the study. The range of ARRIVE score was from 0 to 100, taking into consideration having reported the item in question or not. The mean checklist score was 53%. The items that attained the highest scores included the number of animals utilized, the size of control and experimental groups, and the definition of experimental outcomes. The least frequently reported items included the data regarding the experimental procedure, housing and husbandry, determination and justification of the number of animals, and reporting of adverse events. Surprisingly, full disclosure about ethical guidelines and animal protocol approval was missing in 54% of the studies. No paper stated the sample size estimation. Overall, our study found that a large number of studies display inadequate reporting of fundamental information and that the quality of reporting improved marginally over the study period. We encourage a comprehensive implementation of the ARRIVE guidelines in animal studies exploring tissue engineering for urethral repair, not only to facilitate effective translation of preclinical research findings into clinical therapies, but also to ensure compliance with ethical principles and to minimize unnecessary animal studies.

Genitourinary Tissue Engineering: Reconstruction and Research Models

Tissue engineering is an emerging field of research that initially aimed to produce 3D tissues to bypass the lack of adequate tissues for the repair or replacement of deficient organs. The basis of tissue engineering protocols is to create scaffolds, which can have a synthetic or natural origin, seeded or not with cells. At the same time, more and more studies have indicated the low clinic translation rate of research realised using standard cell culture conditions, i.e., cells on plastic surfaces or using animal models that are too different from humans. New models are needed to mimic the 3D organisation of tissue and the cells themselves and the interaction between cells and the extracellular matrix. In this regard, urology and gynaecology fields are of particular interest. The urethra and vagina can be sites suffering from many pathologies without currently adequate treatment options. Due to the specific organisation of the human urethral/bladder and vaginal epithelium, current research models remain poorly representative. In this review, the anatomy, the current pathologies, and the treatments will be described before focusing on producing tissues and research models using tissue engineering. An emphasis is made on the self-assembly approach, which allows tissue production without the need for biomaterials.

Tissue engineering: recent advances and review of clinical outcome for urethral strictures

PURPOSE OF REVIEW

Urethrotomy remains the first-line therapy in the treatment of a urethral stricture despite data showing no real chance of a cure after repeated urethrotomies. An anastomotic or an augmentation urethroplasty using oral mucosa can be offered to patients following failed urethrotomy. The potential for a tissue engineered solution as an alternative to native tissue has been explored in recent years and is reviewed in this article.

RECENT FINDINGS

More than 80 preclinical studies have investigated a tissue-engineered approach for urethral reconstruction mostly using decellularized natural scaffolds derived from natural extracellular matrix with or without cell seeding. The animal models used in preclinical testing are not representative of disease processes seen with strictures in man. The available clinical studies are based on small noncontrolled series.

SUMMARY

There is a potential role for tissue engineering to provide a material for substitution urethroplasty and work has demonstrated this. Further work will require a rigorous basic science programme and adequate evaluation of the material prior to its introduction into clinical practice. The research with tissue engineering applied to the urethra has not yet been resulted in a widely available material for clinical use that approaches the efficacy seen with the use of autologous grafts.

Soft, Formstable (Co)Polyester Blend Elastomers

High crystallization rate and thermomechanical stability make polylactide stereocomplexes effective nanosized physical netpoints. Here, we address the need for soft, form-stable degradable elastomers for medical applications by designing such blends from (co)polyesters, whose mechanical properties are ruled by their nanodimensional architecture and which are applied as single components in implants. By careful controlling of the copolymer composition and sequence structure of poly[(L-lactide)-co-(ε-caprolactone)], it is possible to prepare hyperelastic polymer blends formed through stereocomplexation by adding poly(D-lactide) (PDLA). Low glass transition temperature T_g ≤ 0 °C of the mixed amorphous phase contributes to the low Young’s modulus E. The formation of stereocomplexes is shown in DSC by melting transitions T_m > 190 °C and in WAXS by distinct scattering maxima at 2θ = 12° and 21°. Tensile testing demonstrated that the blends are soft (E = 12–80 MPa) and show an excellent hyperelastic recovery R_rec = 66–85% while having high elongation at break ε_b up to >1000%. These properties of the blends are attained only when the copolymer has 56–62 wt% lactide content, a weight average molar mass >140 kg·mol⁻¹, and number average lactide sequence length ≥4.8, while the blend is formed with a content of 5–10 wt% of PDLA. The devised strategy to identify a suitable copolymer for stereocomplexation and blend formation is transferable to further polymer systems and will support the development of thermoplastic elastomers suitable for medical applications.

Frontiers in urethra regeneration: current state and future perspective

Despite the positive achievements attained, the treatment of male urethral strictures and hypospadiases still remains a challenge, particularly in cases of severe urethral defects. Complications and the need for additional interventions in such cases are common. Also, shortage of autologous tissue for graft harvesting and significant morbidity in the location of harvesting present problems and often lead to staged treatment. Tissue engineering provides a promising alternative to the current sources of grafts for urethroplasty. Since the first experiments in urethral substitution with tissue engineered grafts, this topic in regenerative medicine has grown remarkably, as many different types of tissue-engineered grafts and approaches in graft design have been suggested and testedin vivo. However, there have been only a few clinical trials of tissue-engineered grafts in urethral substitution, involving hardly more than a hundred patients overall. This indicates that the topic is still in its inception, and the search for the best graft design is continuing. The current review focuses on the state of the art in urethral regeneration with tissue engineering technology. It gives a comprehensive overview of the components of the tissue-engineered graft and an overview of the steps in graft development. Different cell sources, types of scaffolds, assembling approaches, options for vascularization enhancement and preclinical models are considered.

Current state of urethral tissue engineering

PURPOSE OF REVIEW

Urethrotomy remains the first-line therapy in the treatment of a urethral stricture despite data showing no real chance of a cure after repeated urethroplasties. An anastomotic or an augmentation urethroplasty with oral mucosa should be offered to patients with a failed urethrotomy. The availability of grafts can be a concern for both patients and surgeons. The potential for a tissue-engineered solution has been explored in recent years and is explored in this article.

RECENT FINDINGS

More than 80 preclinical studies have investigated a tissue-engineered approach for urethral reconstruction mostly using decellularized natural scaffolds with or without cell seeding. The animal models used in preclinical testing are not representative of disease processes seen with strictures in man. The available clinical studies were of small sample size and lacked control groups. The choice of biomaterial were mostly acellular matrices derived from natural extracellular matrix. The reported success rates in the pilot clinical studies were highly variable.

SUMMARY

The research with tissue engineering of the urethra has not yet been translated into a clinically available material. This is an area where much more research is needed and we would conclude that it is an area of unmet clinical need where users of tissue-engineered urethra in the future need to carry out a rigorous basic science programme and need to be cautious in drawing conclusions based on initial experience and report on long-term clinical results.

Gelatin-polytrimethylene carbonate blend based electrospun tubular construct as a potential vascular biomaterial

The present work details the fabrication of electrospun tubular scaffolds based on the biocompatible and unexploited blend of gelatin and polytrimethylene carbonate (PTMC) as a media (middle layer of blood vessel) equivalent for blood vessel regeneration. An attempt to resemble the media stimulated the selection of gelatin as a matrix (substitution for collagen) with the inclusion of the biodegradable elastomer PTMC (substitution for elastin). -The work highlights the variation of electrospinning parameters and its assiduous selection based on fiber diameter distribution and pore size distribution to obtain smooth microfibers and micropores which is reported for the first time for this blend. Electrospun conduits of gelatin-PTMC blend had fibers sized 6-8 μm and pores sized ~100-150 μm. Young's modulus of 0.40 ± 0.045 MPa was observed, resembling the tunica media of the native artery (~0.5 MPa). An evaluation of the surface properties, topography, and mechanical properties validated its physical requirements for inclusion in a vascular graft. Preliminary biological tests confirmed its minimal in-vitro toxicity and in-vivo biocompatibility. MTT assay (indirect) elucidated cell viability above 70% with scaffold extract, considered to be non-toxic according to the EN ISO-10993-5/12 protocol. The in-vivo subcutaneous implantation in rat showed a marked reduction in macrophages within 15 days revealing its biocompatibility and its possibility for host integration. This comprehensive study presents for the first time the potential of microporous electrospun gelatin and PTMC blend based tubular construct as a potential biomaterial for vascular tissue engineering. The proposed media equivalent included in a bilayer or trilayer polymeric construct can be a promising off-shelf vascular graft.

Urethroplasty with a bilayered poly-D,L-lactide-co-ε-caprolactone scaffold seeded with allogenic mesenchymal stem cells

Reconstructive surgery for urethral defects employing tissue-engineered scaffolds represents an alternative treatment for urethroplasty. The aim of this study was to compare the therapeutic efficacy of the bilayer poly-D,L-lactide/poly-ε-caprolactone (PL-PC) scaffold seeded with allogenic mesenchymal stem cells (MSCs) for urethra reconstruction in a rabbit model with conventional urethroplasty employing an autologous buccal mucosa graft (BG). The inner layer of the scaffold based on poly-D,L-lactic acid (PL) was seeded with MSCs, while the outer layer, prepared from poly-ε-caprolactone, protected the surrounding tissues from urine. To track the MSCs in vivo, the latter were labeled with superparamagnetic iron oxide nanoparticles. In rabbits, a dorsal penile defect was reconstructed employing a BG or a PL-PC graft seeded with nanoparticle-labeled MSCs. In the 12-week follow-up period, no complications were detected. Subsequent histological analysis demonstrated biointegration of the PL-PC graft with surrounding urethral tissues. Less fibrosis and inflammatory cell infiltration were observed in the experimental group as compared with the BG group. Nanoparticle-labeled MSCs were detected in the urothelium and muscular layer, co-localizing with the urothelium cytokeratin marker AE1/AE3, indicating the possibility of MSC differentiation into neo-urothelium. Our results suggest that a bilayer MSCs-seeded scaffold could be efficiently employed for urethroplasty.

Enhancement of the crystallization and biocompatibility of poly(TMC-b-(LLA-ran-GA)) by poly(lactide) stereocomplex

A series of poly(1,3-trimethylene carbonate-b-(l-lactide-ran-glycolide)) (PTLG) with the three-armed PDLA and PLLA stereoblock copolymer (sc-PLA) acting as the nucleating agent was prepared via the solution-casting method.

Porous poly-l-lactide-co-ɛ-caprolactone scaffold: a novel biomaterial for vaginal tissue engineering

The surgical reconstruction of functional neovagina is challenging and susceptible to complications. Therefore, developing tissue engineering-based treatment methods for vaginal defects is important. Our aim was to develop and test a novel supercritical carbon dioxide foamed poly-l-lactide-co-ɛ-caprolactone (scPLCL) scaffold for vaginal reconstruction. The scaffolds were manufactured and characterized for porosity (65 ± 4%), pore size (350 ± 150 µm) and elastic modulus (2.8 ± 0.4 MPa). Vaginal epithelial (EC) and stromal cells (SC) were isolated, expanded and characterized with flow cytometry. Finally, cells were cultured with scPLCL scaffolds in separate and/or co-cultures. Their attachment, viability, proliferation and phenotype were analysed. Both cell types strongly expressed cell surface markers CD44, CD73 and CD166. Strong expression of CD326 was detected with ECs and CD90 and CD105 with SCs. Both ECs and SCs attached and maintained viability on scPLCL. Further, scPLCL supported the proliferation of especially ECs, which also maintained epithelial phenotype (cytokeratin expression) during 14-day assessment period. Interestingly, ECs expressed uroplakin (UP) Ia, UPIb and UPIII markers; further, UPIa and UPIII expression was significantly higher on ECs cultured on scPLCL than on cell culture plastic. In conclusion, the scPLCL is potential scaffold for vaginal tissue engineering and the results of this study further illustrate the excellent biocompatibility of PLCL.

Porous poly-l-lactide-co-ɛ-caprolactone scaffold: a novel biomaterial for vaginal tissue engineering

The surgical reconstruction of functional neovagina is challenging and susceptible to complications. Therefore, developing tissue engineering-based treatment methods for vaginal defects is important. Our aim was to develop and test a novel supercritical carbon dioxide foamed poly-l-lactide-co-ɛ-caprolactone (scPLCL) scaffold for vaginal reconstruction. The scaffolds were manufactured and characterized for porosity (65 ± 4%), pore size (350 ± 150 µm) and elastic modulus (2.8 ± 0.4 MPa). Vaginal epithelial (EC) and stromal cells (SC) were isolated, expanded and characterized with flow cytometry. Finally, cells were cultured with scPLCL scaffolds in separate and/or co-cultures. Their attachment, viability, proliferation and phenotype were analysed. Both cell types strongly expressed cell surface markers CD44, CD73 and CD166. Strong expression of CD326 was detected with ECs and CD90 and CD105 with SCs. Both ECs and SCs attached and maintained viability on scPLCL. Further, scPLCL supported the proliferation of especially ECs, which also maintained epithelial phenotype (cytokeratin expression) during 14-day assessment period. Interestingly, ECs expressed uroplakin (UP) Ia, UPIb and UPIII markers; further, UPIa and UPIII expression was significantly higher on ECs cultured on scPLCL than on cell culture plastic. In conclusion, the scPLCL is potential scaffold for vaginal tissue engineering and the results of this study further illustrate the excellent biocompatibility of PLCL.

Repair of urethral defects by an adipose mesenchymal stem cell‑porous silk fibroin material

The aim of the present study was to determine whether it was possible to repair urethral defects with a material of adipose mesenchymal stem cells (ADMSCs)-porous silk fibroin (SF). A total of 39 male New Zealand white rabbits were randomly divided into a control group, an SF group and a bromodeoxyuridine (BrdU)-labeled ADMSCs-SF group (SSF group; n=13/group). Defects were made by resecting the posterior urethral wall. The defects in the SF and SSF groups were repaired using SF and BrdU-labeled ADMSCs-SF materials respectively. Then the anterior wall was sutured, and the urethral catheter was retained for 3 weeks following surgery. The catheter was rinsed with nitrofurazone once a day. The cells with positive expressions of factor VIII related antigen (FVIII-RAg), α-smooth muscle actin (α-SMA) and pan-cytokeratin (AE1/AE3) were detected by immunohistochemical assay, and the distributions of BrdU positive cells and macrophages were observed. Urethrography was performed prior to and following surgery. All rabbits had normal urethral morphologies prior to surgery. The incidence rates of postoperative complications in the control, SF and SSF groups were 76.92 (7/13), 23.07 (3/13) and 15.38% (2/13), respectively (P<0.05). The number of positive macrophages in the SSF group was significantly lower than that of the SF group 4 weeks following surgery (P<0.05). In the SSF group, BrdU positive cells were scattered within the SF material following surgery, primarily at the intersection between the SF material and the urethra. The number of FVIII-RAg positive cells in the SSF and SF groups were significantly different (P<0.05), which were also significantly higher than that of control group (P<0.01). The number of α-SMA positive cells in the SSF and SF groups were significantly different (P<0.05), and these values also significantly exceeded those exhibited by the control group (P<0.01). In addition, the SSF and SF groups had positive staining of AE1/AE3. Similar to normal urethral mucosa, the cytoplasm was stained brownish yellow (P<0.05). It is thus feasible to repair urethral defects using ADMSCs-SF material.