Torque Test Measurement in Segmental Bone Defects Using Porous Calcium Phosphate Cement Implants

Calcium phosphate cement and locked plate augmentation of distal femoral defects: A biomechanical analysis

PURPOSE

Bone tumors are common in the distal femur and often treated with intralesional curettage. The optimal method of stabilization of large distal femoral defects after curettage remains unclear. The goal of this study is to compare stabilization techniques for large distal femoral defects.

METHODS

Large defects (60 cm³) were milled in the distal lateral metaphysis of 45 adult composite sawbone femurs. The defect was either (1) left untreated or reconstructed with (2) locked plate fixation, (3) calcium phosphate cement packing, or (4) locked plate fixation with calcium phosphate cement packing, or (5) polymethylmethacrylate packing. Each specimen then underwent axial and torsional stiffness testing followed by torsional loading to failure. The data were analyzed using ANOVA with Tukey-Kramer post-hoc analysis.

RESULTS

The calcium phosphate cement filled defect with a locked plate was the stiffest construct in axial and torsional loading as well as the strongest in torque to failure. However, this difference only reached significance with respect to all other groups in torque to failure testing. The calcium phosphate cement filled defect with a locked plate was significantly stiffer than three of the four other groups in both axial and torsional stiffness testing.

CONCLUSIONS

These results indicate that calcium phosphate cement, with or without the addition of locked plate fixation, may provide improved construct stability under time zero testing conditions. This result warrants further testing under cyclic loading condition and consideration for fixation of large femoral metaphyseal defects in future clincal trails.