Fatal haemothorax following large-bore percutaneous cannulation before liver transplantation

Morbidity and mortality of iatrogenic hemothorax occurring in a cohort of liver transplantation recipients: a multicenter observational study

Hemothorax (HT) is a life-threatening condition, mainly iatrogenic and poorly explored in Liver Transplantation (LT) recipients. The aim of this study is to report and analyze for the first time incidence and outcomes of HT in LT recipients, as well as to suggest a management strategy. Data concerning 7130 consecutive adult liver and liver-kidney transplant recipients were retrospectively collected from ten Transplantation Centers' institutional databases, over a 10-year period. Clinical parameters, management strategies and survival data about post-operative HT were analyzed and reported. Thirty patients developed HT during hospitalization (0.42%). Thoracentesis was found to be the most common cause of HT (16 patients). A non-surgical management was performed in 17 patients, while 13 patients underwent surgery. 19 patients developed thoracic complications after HT treatment, with an overall mortality rate of 50%. The median length of stay in Intensive Care Units was 22 days (IQR_25-75 5-66.5). Postoperative hemothorax is mainly due to iatrogenic causes in LT recipients. Despite rare, it represents a serious complication with a high mortality rate and a challenging medical and surgical management. Its occurrence should always be prevented.

Aspiration of massive free air from a large bore intravenous catheter sheath: A case report

We firstly experienced a rare case demonstrating that massive volume of free air was aspirated from a large bore intravenous catheter sheath of the pulmonary arterial catheter during placement. A 44-year-old male patient underwent the emergency induction of anesthesia for transplantation of liver donated by the brain death subject. After the induction, the central venous and pulmonary artery catheter placement was conducted. The aspiration of venous blood confirmed the intravascular insertion, but massive free air was aspirated when we advanced the sheath proximally. A perforation of subclavian vein and subsequent pneumothorax was strongly suspected. The emergency computed tomography revealed no sign of pneumothorax, pneumomediastinum nor extravasation. The operation was undergone with intensive monitoring and no further adverse complication was observed. The postoperative medical inquiry concluded that the massive free air was not aspirated from extravascular space, for example, thorax or mediastinum through the tip of the sheath, but from the proximal main port of the sheath. When the tip of sheath is occluded by the migration into small vessels, the large negative pressure through side port might easily aspirate the air through the 1-way valve of the main proximal port. Physicians should keep in mind of the structure of the catheter sheath.

Folded large-bore central catheter in the right internal jugular vein as shown by ultrasound: a case report

Central venous catheters are used for various purposes in the operating room. Generally, the use of ultrasound to insert a central venous catheter is rapid and minimally complicated. An advanced venous access (AVA) catheter is used to gain access to the pulmonary artery and facilitate fluid resuscitation through the internal jugular vein. The present report describes a case in which ultrasound was used in a 43-year-old man to avoid complications during insertion of an AVA catheter with a relatively large diameter. The sheath of the catheter was so thin that a dilator was essential to prevent it from folding upon insertion. Despite the use of ultrasound guidance, the AVA catheter sheath became folded within the patient’s internal jugular vein. Mechanical complications of central venous catheter insertion are well known, but folding of a large-bore catheter in the internal jugular vein has rarely been reported.

Brachiocephalic Vein Perforation During Cannulation of Internal Jugular Vein: A Case Report

We report a rare complication of right brachiocephalic vein perforation during ultrasound-guided cannulation of the right internal jugular vein (IJV) in a patient with a tortuous common carotid artery (CCA). We suspect that the tortuous CCA displaced the IJV, which caused misplacement of the J-tip guidewire into the subclavian vein. The stiff dilator sheath introduced over the guidewire then perforated the wall of the brachiocephalic vein, causing massive hemothorax. This was diagnosed by videothoracoscopy. Anesthesiologists should be aware of the possibility of guidewire malposition during IJV catheterization in patients with a tortuous CCA.

Predicting the Dimensions of an Intracardiac Partial-Assist Pump for Percutaneous Delivery by Analytical and Numerical Methods

A minimally invasive ventricular assist device is under development for percutaneous insertion into the left atrium via transseptal access from the right atrium (RA). This study aimed to mathematically describe the vascular anatomy along possible insertion pathways to determine the device's maximum outer dimensions. We developed 2-dimensional mathematical models describing the vascular anatomy to the RA from three access points: subclavian vein (SCV), internal jugular vein (IJV), and femoral vein (FV). All pathways terminated by turning from the superior or inferior vena cava (SVC/IVC) into the RA. The model equations were based on restriction points in the pathways and were solved using anatomic size values 1 SD below published mean values so that the device will accommodate most patients. Vessels were considered rigid so that vessel deformation (and therefore risk) is minimized during device insertion. Maximum device length was calculated for a range of device diameters. The length at the most constraining angle in each turn was the maximum allowable device length. The least restrictive pathway was from the right FV, the turn from the IVC through the atrial septum being the most restrictive point. For a 10-mm diameter device, the length restriction for this pathway was 45 mm, whereas those for the right IJV and SCV were 42 and 21 mm, respectively. Medical device developers can apply these models to determine size specifications of new devices, whereas interventional physicians can apply them to determine if an existing device is appropriate for an individual patient.

Different mechanical properties in Seldinger guide wires

Background and Aims:

Most central venous catheters are placed using Seldinger guide wires. EN ISO 11070 is the guideline for testing guide wire flexing performance and tensile strength, and we can safely assume that guide wires in use meet these requirements. Unfortunately, EN ISO 11070 guidelines do not reflect the clinical requirements and we continue to see mechanical failures and their associated complications.

Material and Methods:

This in vitro study was performed in an accredited laboratory. With regard to flexing, we: (1) Established the minimum flexing performance needed to meet clinical requirements, (2) developed flexing performance tests which mimic clinical requirement, and (3) evaluated the mechanical properties of various guide wires relative to these requirements. With regard to tensile strength, we used the testing method prescribed in ISO 11070, but did not end the test at 5 Newton (N). We continued until the guide wire was damaged, or we reached maximum tractive force. We then did a wire-to-wire comparison. We examined two basic wire constructions, monofil and core and coil.

Results:

Tensile strength: All wires tested, except one, met EN ISO 11070 requirements for 5 N tensile strength. The mean of the wire types tested ranged from 15.06 N to 257.76 N. Flexing performance: None of the wires kinked. The monofil had no evidence of bending. Two core/coil wires displayed minor bending (angle 1.5°). All other wires displayed bending angles between 22.5° and 43.0°.

Conclusion:

We recommend that: (1) Clinicians use guide wires with high-end mechanical properties, (2) EN ISO 11070 incorporate our flexing test into their testing method, raise the flexing requirement to kink-proof, (3) and raise the tensile strength requirement to a minimum of 30 N, and (3) all manufacturers and suppliers be required to display mechanical properties of all guide wire, and guide wire kits sold.

A significant complication that occurred during insertion of dual guidewires into the right internal jugular vein for central venous catheterization

We report a significant complication that occurred during double guidewire insertion. The first guidewire (GW1) was inserted under ultrasonographic guidance, whereas the second guidewire (GW2) was inserted by the landmark-based method. Subsequently, GW2 penetrated and entangled with GW1, which caused difficulty in removing both guidewires. A dilator was used to dilate the puncture site, allowing simultaneous removal of both guidewires with minimal invasion. The first guidewire was found to be pointing in a cranial direction, indicating the manner in which the second guidewire's puncture needle had penetrated it. Thus, when double cannulation is performed, guidewire position should be confirmed.

Mechanical properties of Seldinger guidewires

BACKGROUND

Almost all central venous catheters are placed using the Seldinger technique. Despite the introduction of ISO 11070 in 1998, we continue to see mechanical wire failures and their associated complications.

METHODS

Seven different wire types were tested regarding their tensile strength and eight different types for their flexing performance. For each wire type six wires were assessed. Tensile strength was examined using the test method described in ISO 11070, but the test did not end at 10 N. For flexing performance testing a new apparatus, closely mimicking clinical requirements, was designed.Wires were scanned digitally after testing for measurement and analysis.

RESULTS

All wire types tested, except one, consistently met ISO 11070 requirements for 10 N tensile strength. The maximum tension the wires were able to withstand ranged from 15.06 N to 257.76 N.None of the wires kinked. The monofil wires had no evidence of bending. Two core and coil wires displayed minor bending (angle 1.5°). All other wires displayed bending angles between 22.5° and 43.0°. The degree of bending was also dependent on the angle between the dilator and wire.

CONCLUSION

The mechanical properties of different types of guidewires show considerable differences, not detected with current ISO 11070 based testing. Uncovering those may allow set up of clinical trials to examine whether regular use of wires with high-end mechanical properties could reduce CVC insertion-related complication rates.

Vascular access for hemodialysis: current perspectives

A well-functioning vascular access (VA) is a mainstay to perform an efficient hemodialysis (HD) procedure. There are three main types of access: native arteriovenous fistula (AVF), arteriovenous graft, and central venous catheter (CVC). AVF, described by Brescia and Cimino, remains the first choice for chronic HD. It is the best access for longevity and has the lowest association with morbidity and mortality, and for this reason AVF use is strongly recommended by guidelines from different countries. Once autogenous options have been exhausted, prosthetic fistulae become the second option of maintenance HD access alternatives. CVCs have become an important adjunct in maintaining patients on HD. The preferable locations for insertion are the internal jugular and femoral veins. The subclavian vein is considered the third choice because of the high risk of thrombosis. Complications associated with CVC insertion range from 5% to 19%. Since an increasing number of patients have implanted pacemakers and defibrillators, usually inserted via the subclavian vein and superior vena cava into the right heart, a careful assessment of risk and benefits should be taken. Infection is responsible for the removal of about 30%-60% of HD CVCs, and hospitalization rates are higher among patients with CVCs than among AVF ones. Proper VA maintenance requires integration of different professionals to create a VA team. This team should include a nephrologist, radiologist, vascular surgeon, infectious disease consultant, and members of the dialysis staff. They should provide their experience in order to give the best options to uremic patients and the best care for their VA.

Central vein perforation during tunneled dialysis catheter insertion: principles of acute management

Central venous perforation during dialysis catheter insertion is a potentially fatal complication. Prompt recognition and judicious initial steps are important in optimizing the outcome. The purpose of this manuscript is to illustrate the imaging features and steps in initial management.

Loss of guide wire: a lesson learnt review of literature

Catheterization of central veins is a routine technique which is widely used in emergency department and medical intensive care units. Seldinger's technique is widely used to place central venous and arterial catheters and is generally considered safe. The technique does have multiple potential risks. Guide wire-related complications are rare but potentially serious. We describe a case of a lost guide wire during central venous catheter (CVC) insertion followed by a review of the literature of this topic. Measures which can be taken to prevent such complications are explained in detail as well as recommended steps to remedy errors should they occur.

Complications related to invasive hemodynamic monitors during adult liver transplantation

The rate of complications directly related to invasive monitors during liver transplantation (LT) was reviewed in 1206 consecutive adult LTs performed over 8.6 yr (1/1/2004-7/31/2012). The designated anesthesiologists placed intra-operative monitors, including two arterial catheters (via the radial and the right femoral arteries), central venous catheters (a 9 Fr. catheter and an 18 Fr. veno-venous bypass [VVB] return cannula in an internal jugular vein), a pulmonary artery catheter, and a transesophageal echocardiography (TEE) probe. A 17 Fr. VVB drainage cannula was placed via the left femoral vein. No Clavien-Dindo Grade V (death) or Grade IV (organ dysfunction) complication was identified. Nine Grade III complications (requiring surgical intervention) and 15 Grade II complications (conservative treatment) were noted. Seven (0.58% in 1206 cases) were related to a femoral arterial line with Grade III of four; seven (0.58%) were due to VVB return cannula in the femoral vein with Grade III of one; four (0.33%) were related to central venous catheters with Grade III of two; four (0.33%) were due to a TEE probe with Grade III of two; and two minor complications (0.17%) that were related to a radial arterial line. No complication was observed with a pulmonary arterial catheter. Current invasive monitors placed during LT have an acceptable risk.

Comparison of the central venous pressure from internal jugular vein and the pressure measured from the peripherally inserted antecubital central catheter (PICCP) in liver transplantation recipients

Background

Unlike its use during stable conditions, central venous pressure (CVP) monitoring from a peripherally inserted central venous catheter (PICC) has not often been used in surgeries with significant hemodynamic alterations. The aim of this study was to evaluate the feasibility of measuring PICC pressure (PICCP) as an alternative to measuring centrally inserted central catheter pressure (CICCP) in adult liver transplantation (LT) patients.

Methods

We measured PICCP and CICCP simultaneously during each main surgical period in adult LT. Statistical analysis was performed using simple linear regression analysis to observe whether changes in PICCP paralleled by simultaneous changes in CICCP. Correlation analysis and Bland-Altman analysis were used to determine the degree of agreement between the two devices. Differences were considered statistically significant when P values were less than 0.05.

Results

A total of 1342 data pairs were collected from 35 patients. The PICCPs and CICCPs were highly correlated overall (r = 0.970, P < 0.001) as well as at each period measured. The differences among each period were not clinically significant (0.33 mmHg for pre-anhepatic, 0.32 mmHg for anhepatic, -0.15 mmHg for reperfusion, and -0.10 mmHg for neohepatic periods). The overall mean difference was 0.14 mmHg (95% confidence interval: 0.09-0.19) and PICCP tended to give a higher reading by between 0.09 and 0.19 mmHg overall. The limit of agreement was -1.74 to 2.02 overall.

Conclusions

These findings suggest that PICCP can be a reasonable alternative to CICCP in situations of dynamic systemic compliance and preload, as well as under stable hemodynamic conditions.

Guidewire-Related Complications during Central Venous Catheter Placement: A Case Report and Review of the Literature

Seldinger's technique is widely used to place central venous and arterial catheters and is generally considered safe. The technique does have multiple potential risks. Guidewire-related complications are rare but potentially serious. We describe a case of a lost guidewire during central venous catheter insertion followed by a review of the literature of this topic. Measures which can be taken to prevent such complications are explained in detail as well as recommended steps to remedy errors should they occur.

Application of positive end-expiratory pressure in a case with large laceration on the superior vena cava

Iatrogenic injury is a difficult situation for a surgeon. Being successful in saving a patient at risk is the major concern in this situation. Once an iatrogenic injury to the superior vena cava (SVC) is found, increasing the intrathoracic pressure is theoretically able to overcome the venous pressure and to alleviate or even stop bleeding from injury. A 76-year-old female patient, who had suffered from end-stage diabetic nephropathy, developed tension hemothorax during insertion of the cuffed hemodialysis catheter. The successful course of resuscitation without emergent operation or endovascular repair is presented here.

Life-threatening hemothorax resulting from right brachiocephalic vein perforation during right internal jugular vein catheterization

We present a life-threatening case of hemothorax resulting from right brachiocephalic vein perforation during right internal jugular vein catheterization. We considered that the guidewire had punctured the right brachiocephalic vein extraluminally and the catheter inserted over the guidewire had enlarged the size of the perforation. Despite the use of proper technique, an angle-tip guidewire may perforate the venous wall. Therefore, when there is negative aspiration after central venous catheterization, it is important to perform an emergency chest radiograph before proceeding with surgery; it is also important not to use an angle-tip guidewire.

Case report: managing a knotted Seldinger wire in the subclavian vein during central venous cannulation

PURPOSE

To describe the successful removal of a knotted Seldinger wire from a subclavian vein, and review the design and structure of guidewires to formulate recommendations to minimize complications associated with the Seldinger technique.

CLINICAL FEATURES

An 81-yr-old patient suffered from an intravascular knotting of a Seldinger wire during subclavian venous cannulation. We describe a technique for successful removal of knotted guidewire under fluoroscopic guidance using the vessel dilator of a central venous cannulation kit. In this case, the technique was successful without associated immediate or delayed complications. Although central venous cannulation with the Seldinger technique is a commonly performed procedure, it may result in numerous complications, including kinking, and rarely complete knotting of the guidewire.

CONCLUSIONS

A thorough understanding of procedural complications and physical characteristics of the guidewire is vital in order to ensure patient safety when using the Seldinger technique for central venous cannulation. We have reviewed the relevant literature for guidewire design and structure, associated complications, and provide recommendations for safe use of guidewires.

Complications associated with percutaneous placement of venous return cannula for venovenous bypass in adult orthotopic liver transplantation

Percutaneous large bore cannula placement during orthotopic liver transplantation (OLT) for use in venovenous bypass (VVB) has been reported to be a rapid and simple technique. It is, however, a technique that carries its own risks. The aim of the study was to investigate the incidence of complications related to the placement of a percutaneous venous return cannula and subsequent VVB in OLT. A retrospective review of 360 consecutive adult OLT patients during a period of 18 months (January 1, 2003 to June 30, 2004) was performed. The percutaneous venous cannula (18 Fr) was placed by an attending transplant anesthesiologist. The cannulation was attempted in 326 patients (90.6%). No cannulation was attempted on the subclavian veins. Internal jugular venous cannula placement was attempted but aborted in 6 patients (1.8%) due to technical difficulties. In 320 patients who received an internal jugular venous cannula, 313 (97.8%) underwent OLT without complication. The remaining 7 patients (2.2%) had complications. The operation was delayed for 1 patient due to suspected hemomediastinum. The other 6 complications were related to VVB: air embolism (2 patients), low flow rate (2 patients), hypotension (1 patient), and atrial fibrillation (1 patient). Successful OLT was eventually carried out in all the 7 patients and no mortality associated with internal jugular venous cannula placement or VVB was noted. In conclusion, percutaneous placement of a large bore venous return cannula for VVB during adult OLT can be performed with acceptable risk using a flexible 18-Fr cannula via the right internal jugular vein (IJV) by experienced attending transplant anesthesiologists.