Functional characterization of GumK, a membrane-associated -glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

Pyruvate Substitutions on Glycoconjugates

Glycoconjugates are the most diverse biomolecules of life. Mostly located at the cell surface, they translate into cell-specific "barcodes" and offer a vast repertoire of functions, including support of cellular physiology, lifestyle, and pathogenicity. Functions can be fine-tuned by non-carbohydrate modifications on the constituting monosaccharides. Among these modifications is pyruvylation, which is present either in enol or ketal form. The most commonly best-understood example of pyruvylation is enol-pyruvylation of N-acetylglucosamine, which occurs at an early stage in the biosynthesis of the bacterial cell wall component peptidoglycan. Ketal-pyruvylation, in contrast, is present in diverse classes of glycoconjugates, from bacteria to algae to yeast-but not in humans. Mild purification strategies preventing the loss of the acid-labile ketal-pyruvyl group have led to a collection of elucidated pyruvylated glycan structures. However, knowledge of involved pyruvyltransferases creating a ring structure on various monosaccharides is scarce, mainly due to the lack of knowledge of fingerprint motifs of these enzymes and the unavailability of genome sequences of the organisms undergoing pyruvylation. This review compiles the current information on the widespread but under-investigated ketal-pyruvylation of monosaccharides, starting with different classes of pyruvylated glycoconjugates and associated functions, leading to pyruvyltransferases, their specificity and sequence space, and insight into pyruvate analytics.

Identification and characterization of six glycosyltransferases involved in the biosynthesis of a new bacterial exopolysaccharide in Paenibacillus elgii

Paenibacillus elgii B69 produces a new xylose-containing exopolysaccharide (EPS) that effectively removes the pollutants from wastewater through flocculation. However, information about the biosynthesis of this EPS is limited. In this study, sequence analysis showed six putative glycosyltransferases (GTs) genes in polysaccharide gene clusters involved in glycosidic linkages of repeating units. Each gene was deleted and phenotypes were examined to understand the functions of these genes. Two of the genes were deleted successfully to encode a priming glucose GT and a side-chain xylose GT, but other genes were unsuccessfully deleted because of the accumulation of toxic intermediate products. The six genes were cloned and expressed in Escherichia coli, and the corresponding enzymes were purified. The activity of GTs was analyzed through mass spectrometry by using the purified membrane fraction as a lipid carrier receptor after a hexasaccharide repeated unit was reconstructed in vitro. The specificities of six different GTs and the building order of the hexasaccharide were characterized. This study provided a basis for future research on the biosynthetic pathway of EPS in Paenibacillus or other genera.

Dissection of exopolysaccharide biosynthesis in Kozakia baliensis

Background

Acetic acid bacteria (AAB) are well known producers of commercially used exopolysaccharides, such as cellulose and levan. Kozakia (K.) baliensis is a relatively new member of AAB, which produces ultra-high molecular weight levan from sucrose. Throughout cultivation of two K. baliensis strains (DSM 14400, NBRC 16680) on sucrose-deficient media, we found that both strains still produce high amounts of mucous, water-soluble substances from mannitol and glycerol as (main) carbon sources. This indicated that both Kozakia strains additionally produce new classes of so far not characterized EPS.

Results

By whole genome sequencing of both strains, circularized genomes could be established and typical EPS forming clusters were identified. As expected, complete ORFs coding for levansucrases could be detected in both Kozakia strains. In K. baliensis DSM 14400 plasmid encoded cellulose synthase genes and fragments of truncated levansucrase operons could be assigned in contrast to K. baliensis NBRC 16680. Additionally, both K. baliensis strains harbor identical gum-like clusters, which are related to the well characterized gum cluster coding for xanthan synthesis in Xanthomanas campestris and show highest similarity with gum-like heteropolysaccharide (HePS) clusters from other acetic acid bacteria such as Gluconacetobacter diazotrophicus and Komagataeibacter xylinus. A mutant strain of K. baliensis NBRC 16680 lacking EPS production on sucrose-deficient media exhibited a transposon insertion in front of the gumD gene of its gum-like cluster in contrast to the wildtype strain, which indicated the essential role of gumD and of the associated gum genes for production of these new EPS. The EPS secreted by K. baliensis are composed of glucose, galactose and mannose, respectively, which is in agreement with the predicted sugar monomer composition derived from in silico genome analysis of the respective gum-like clusters.

Conclusions

By comparative sugar monomer and genome analysis, the polymeric substances secreted by K. baliensis can be considered as unique HePS. Via genome sequencing of K. baliensis DSM 14400 + NBRC 16680 we got first insights into the biosynthesis of these novel HePS, which is related to xanthan and acetan biosynthesis. Consequently, the present study provides the basis for establishment of K. baliensis strains as novel microbial cell factories for biotechnologically relevant, unique polysaccharides.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-016-0572-x) contains supplementary material, which is available to authorized users.

Binding of the substrate UDP-glucuronic acid induces conformational changes in the xanthan gum glucuronosyltransferase

GumK is a membrane-associated glucuronosyltransferase of Xanthomonas campestris that is involved in xanthan gum biosynthesis. GumK belongs to the inverting GT-B superfamily and catalyzes the transfer of a glucuronic acid (GlcA) residue from uridine diphosphate (UDP)-GlcA (UDP-GlcA) to a lipid-PP-trisaccharide embedded in the membrane of the bacteria. The structure of GumK was previously described in its apo- and UDP-bound forms, with no significant conformational differences being observed. Here, we study the behavior of GumK toward its donor substrate UDP-GlcA. Turbidity measurements revealed that the interaction of GumK with UDP-GlcA produces aggregation of protein molecules under specific conditions. Moreover, limited proteolysis assays demonstrated protection of enzymatic digestion when UDP-GlcA is present, and this protection is promoted by substrate binding. Circular dichroism spectroscopy also revealed changes in the GumK tertiary structure after UDP-GlcA addition. According to the obtained emission fluorescence results, we suggest the possibility of exposure of hydrophobic residues upon UDP-GlcA binding. We present in silico-built models of GumK complexed with UDP-GlcA as well as its analogs UDP-glucose and UDP-galacturonic acid. Through molecular dynamics simulations, we also show that a relative movement between the domains appears to be specific and to be triggered by UDP-GlcA. The results presented here strongly suggest that GumK undergoes a conformational change upon donor substrate binding, likely bringing the two Rossmann fold domains closer together and triggering a change in the N-terminal domain, with consequent generation of the acceptor substrate binding site.

Bacterial exopolysaccharides: biosynthesis pathways and engineering strategies

Bacteria produce a wide range of exopolysaccharides which are synthesized via different biosynthesis pathways. The genes responsible for synthesis are often clustered within the genome of the respective production organism. A better understanding of the fundamental processes involved in exopolysaccharide biosynthesis and the regulation of these processes is critical toward genetic, metabolic and protein-engineering approaches to produce tailor-made polymers. These designer polymers will exhibit superior material properties targeting medical and industrial applications. Exploiting the natural design space for production of a variety of biopolymer will open up a range of new applications. Here, we summarize the key aspects of microbial exopolysaccharide biosynthesis and highlight the latest engineering approaches toward the production of tailor-made variants with the potential to be used as valuable renewable and high-performance products for medical and industrial applications.

Biophysical characterization of the outer membrane polysaccharide export protein and the polysaccharide co-polymerase protein from Xanthomonas campestris

This study investigated the structural and biophysical characteristics of GumB and GumC, two Xanthomonas campestris membrane proteins that are involved in xanthan biosynthesis. Xanthan is an exopolysaccharide that is thought to be a virulence factor that contributes to bacterial in planta growth. It also is one of the most important industrial biopolymers. The first steps of xanthan biosynthesis are well understood, but the polymerization and export mechanisms remain unclear. For this reason, the key proteins must be characterized to better understand these processes. Here we characterized, by biochemical and biophysical techniques, GumB, the outer membrane polysaccharide export protein, and GumC, the polysaccharide co-polymerase protein of the xanthan biosynthesis system. Our results suggested that recombinant GumB is a tetrameric protein in solution. On the other hand, we observed that both native and recombinant GumC present oligomeric conformation consistent with dimers and higher-order oligomers. The transmembrane segments of GumC are required for GumC expression and/or stability. These initial results provide a starting point for additional studies that will clarify the roles of GumB and GumC in the xanthan polymerization and export processes and further elucidate their functions and mechanisms of action.

Expression, purification and biochemical characterization of GumI, a monotopic membrane GDP-mannose:glycolipid 4-{beta}-D-mannosyltransferase from Xanthomonas campestris pv. campestris

We describe the first biochemical characterization of the gumI gene product, an essential protein for xanthan polysaccharide synthesis. Cellular fractionation experiments reveal the presence of a protein associated with the membrane fraction, even in the absence of the other proteins responsible for the synthesis of glycolipid intermediates and the proteins involved in the polymerization and transport of the xanthan chains. By alkaline buffer extraction and detergent phase partitioning, GumI was categorized as a monotopic membrane protein. GumI was overexpressed in Escherichia coli, solubilized and purified in an active and stable form using a simple and reproducible two-step procedure. The purified recombinant GumI is a nonprocessive β-mannosyltransferase that uses GDP-Man as a donor substrate and glucuronic acid-β-1,2-mannose-α-1,3-glucose-β-1,4-glucose-PP-polyisoprenyl as an acceptor. We also established the optimal biochemical conditions for GumI enzymatic activity. Sequence analysis revealed the presence of a conserved domain for glycosyltransferases (GTs) of the GT-B superfamily and homologous proteins in several prokaryote organisms. On the basis of this biochemical characterization, GumI may represent the founding member of a new GT family in the Carbohydrate-Active EnZymes classification.

Characterization and synthetic application of a novel beta1,3-galactosyltransferase from Escherichia coli O55:H7

A beta1,3-galactosyltransferase (WbgO) was identified in Escherichia coli O55:H7. Its function was confirmed by radioactive activity assay and structure analysis of the disaccharide synthesized with the recombinant enzyme. WbgO requires a divalent metal ion, either Mn(2+) or Mg(2+), for its activity and is active between pH 6.0-8.0 with a pH optimum of 7.0. N-acetylglucosamine (GlcNAc) and oligosaccharides with GlcNAc at the non-reducing end were shown to be its preferred substrates and it can be used for the synthesis of type 1 glycan chains from these substrates. Together with a recombinant bacterial GlcNAc-transferase, benzyl beta-lacto-N-tetraoside was synthesized with the purified WbgO to demonstrate the synthetic utility of WbgO.

High-yield expression and purification of a monotopic membrane glycosyltransferase

Membrane proteins are essential to many cellular processes. However, the systematic study of membrane protein structure has been hindered by the difficulty in obtaining large quantities of these proteins. Protein overexpression using Escherichia coli is commonly used to produce large quantities of protein, but usually yields very little membrane protein. Furthermore, optimization of the expressing conditions, as well as the choice of detergent and other buffer components, is thought to be crucial for increasing the yield of stable and homogeneous protein. Herein we report high-yield expression and purification of a membrane-associated monotopic protein, the glycosyltransferase monoglucosyldiacylglycerol synthase (alMGS), in E. coli. Systematic optimization of protein expression was achieved through controlling a few basic expression parameters, including temperature and growth media, and the purifications were monitored using a fast and efficient size-exclusion chromatography (SEC) screening method. The latter method was shown to be a powerful tool for fast screening and for finding the optimal protein-stabilizing conditions. For alMGS it was found that the concentration of detergent was just as important as the type of detergent, and a low concentration of n-dodecyl-beta-D-maltoside (DDM) (approximately 1x critical micelle concentration) was the best for keeping the protein stable and homogeneous. By using these simply methods to optimize the conditions for alMGS expression and purification, the final expression level increase by two orders of magnitude, reaching 170 mg of pure protein per litre culture.

Mutational analysis of the gum gene cluster required for xanthan biosynthesis in Xanthomonas oryzae pv oryzae

Genome sequence analysis of Xanthomonas oryzae pv. oryzae has revealed a cluster of 12 ORFs that are closely related to the gum gene cluster of Xanthomonas campestris pv. campestris. The gum gene cluster of X. oryzae encodes proteins involved in xanthan production; however, there is little experimental evidence supporting this. In this study, biochemical analyses of xanthan produced by a defined set of X. oryzae gum mutant strains allowed us to preliminarily assign functions to most of the gum gene products: biosynthesis of the pentasaccharide repeating unit for GumD, GumM, GumH, GumK, and GumI, xanthan polymerization and transport for GumB, GumC, GumE, and GumJ, and modification of the pentasaccharide repeating unit for GumF, GumG, and GumL. In addition, we found that the exopolysaccharides are essential but not specific for the virulence of X. oryzae.

Structure and mechanism of GumK, a membrane-associated glucuronosyltransferase

Xanthomonas campestris GumK (beta-1,2-glucuronosyltransferase) is a 44-kDa membrane-associated protein that is involved in the biosynthesis of xanthan, an exopolysaccharide crucial for this bacterium's phytopathogenicity. Xanthan also has many important industrial applications. The GumK enzyme is the founding member of the glycosyltransferase family 70 of carbohydrate-active enzymes, which is composed of bacterial glycosyltransferases involved in exopolysaccharide synthesis. No x-ray structures have been reported for this family. To better understand the mechanism of action of the bacterial glycosyltransferases in this family, the x-ray crystal structure of apo-GumK was solved at 1.9 angstroms resolution. The enzyme has two well defined Rossmann domains with a catalytic cleft between them, which is a typical feature of the glycosyltransferase B superfamily. Additionally, the crystal structure of GumK complexed with UDP was solved at 2.28 angstroms resolution. We identified a number of catalytically important residues, including Asp157, which serves as the general base in the transfer reaction. Residues Met231, Met273, Glu272, Tyr292, Met306, Lys307, and Gln310 interact with UDP, and mutation of these residues affected protein activity both in vitro and in vivo. The biological and structural data reported here shed light on the molecular basis for donor and acceptor selectivity in this glycosyltransferase family. These results also provide a rationale to obtain new polysaccharides by varying residues in the conserved alpha/beta/alpha structural motif of GumK.

Characterization of two beta-1,3-glucosyltransferases from Escherichia coli serotypes O56 and O152

The O antigens of outer membrane-bound lipopolysaccharides (LPS) in gram-negative bacteria are oligosaccharides consisting of repeating units with various structures and antigenicities. The O56 and O152 antigens of Escherichia coli both contain a Glc-beta1-3-GlcNAc linkage within the repeating unit. We have cloned and identified the genes (wfaP in O56 and wfgD in O152) within the two O-antigen gene clusters that encode glucosyltransferases involved in the synthesis of this linkage. A synthetic substrate analog of the natural acceptor substrate undecaprenol-pyrophosphate-lipid [GlcNAc-alpha-PO3-PO3-(CH2)11-O-phenyl] was used as an acceptor and UDP-Glc as a donor substrate to demonstrate that both wfgD and wfaP encode glucosyltransferases. Enzyme products from both glucosyltransferases were isolated by high-pressure liquid chromatography and analyzed by nuclear magnetic resonance. The spectra showed the expected Glc-beta1-3-GlcNAc linkage in the products, confirming that both WfaP and WfgD are forms of UDP-Glc: GlcNAc-pyrophosphate-lipid beta-1,3-glucosyltransferases. Both WfaP and WfgD have a DxD sequence, which is proposed to interact with phosphate groups of the nucleotide donor through the coordination of a metal cation, and a short hydrophobic sequence at the C terminus that may help to associate the enzymes with the inner membrane. We showed that the enzymes have similar properties and substrate recognition. They both require a divalent cation (Mn2+ or Mg2+) for activity, are deactivated by detergents, have a broad pH optimum, and require the pyrophosphate-sugar linkage in the acceptor substrate for full activity. Substrates lacking phosphate or pyrophosphate linked to GlcNAc were inactive. The length of the aliphatic chain of acceptor substrates also contributes to the activity.

The genome of Xanthomonas campestris pv. campestris B100 and its use for the reconstruction of metabolic pathways involved in xanthan biosynthesis

The complete genome sequence of the Xanthomonas campestris pv. campestris strain B100 was established. It consisted of a chromosome of 5,079,003bp, with 4471 protein-coding genes and 62 RNA genes. Comparative genomics showed that the genes required for the synthesis of xanthan and xanthan precursors were highly conserved among three sequenced X. campestris pv. campestris genomes, but differed noticeably when compared to the remaining four Xanthomonas genomes available. For the xanthan biosynthesis genes gumB and gumK earlier translational starts were proposed, while gumI and gumL turned out to be unique with no homologues beyond the Xanthomonas genomes sequenced. From the genomic data the biosynthesis pathways for the production of the exopolysaccharide xanthan could be elucidated. The first step of this process is the uptake of sugars serving as carbon and energy sources wherefore genes for 15 carbohydrate import systems could be identified. Metabolic pathways playing a role for xanthan biosynthesis could be deduced from the annotated genome. These reconstructed pathways concerned the storage and metabolization of the imported sugars. The recognized sugar utilization pathways included the Entner-Doudoroff and the pentose phosphate pathway as well as the Embden-Meyerhof pathway (glycolysis). The reconstruction indicated that the nucleotide sugar precursors for xanthan can be converted from intermediates of the pentose phosphate pathway, some of which are also intermediates of glycolysis or the Entner-Doudoroff pathway. Xanthan biosynthesis requires in particular the nucleotide sugars UDP-glucose, UDP-glucuronate, and GDP-mannose, from which xanthan repeat units are built under the control of the gum genes. The updated genome annotation data allowed reconsidering and refining the mechanistic model for xanthan biosynthesis.

Qualitative and comparative proteomic analysis ofXanthomonas campestris pv.campestris 17

The bacterium Xanthomonas campestris pathovar campestris (XCC) 17 is a local isolate that causes crucifer black rot disease in Taiwan. In this study, its proteome was separated using 2-DE and the well-resolved proteins were excised, trypsin digested, and analyzed by MS. Over 400 protein spots were analyzed and 281 proteins were identified by searching the MS or MS/MS spectra against the proteome database of the closely related XCC ATCC 33913. Functional categorization of the identified proteins matched 141 (50%) proteins to 81 metabolic pathways in the Kyoto Encyclopedia of Genes and Genomes (KEGG) database. In addition, we performed a comparative proteome analysis of the pathogenic strain 17 and an avirulent strain 11A to reveal the virulence-related proteins. We detected 22 up-regulated proteins in strain 17 including the degrading enzymes EngXCA, HtrA, and PepA, which had been shown to have a role in pathogenesis in other bacteria, and an anti-host defense protein, Ohr. Thus, further functional studies of these up-regulated proteins with respect to their roles in XCC pathogenicity are suggested.

Transcriptional analysis of the gum gene cluster from Xanthomonas oryzae pathovar oryzae

Genome sequence analysis of Xanthomonas oryzae pv. oryzae KACC10331 provides insight into the X. oryzae gum gene cluster that is composed of 14 open-reading frames (ORFs), designated gumB, -C, -D, -E, -F, -G, -H, -I, -J, -K, -L, -M, XOO3167, and -N. We analyzed the transcriptional linkage of the X. oryzae gum gene cluster by using RT-PCR. Analyses of the gum gene cluster by RT-PCR with the wild-type and mutant strains, which carried a deletion of the promoter-like region upstream of gumB or an insertion of the rrnB transcriptional terminator into the gumF gene, revealed that the ORFs of this gene cluster were transcribed as polycistronic mRNA, from gumB to gumN, and the secondary promoter was located upstream of gumG. Taken together, these results suggest that the genes of this cluster constitute an operon expressed from overlapping transcripts.

Crystallization and preliminary crystallographic characterization of GumK, a membrane-associated glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

GumK is a membrane-associated inverting glucuronosyltransferase that is part of the biosynthetic route of xanthan, an industrially important exopolysaccharide produced by Xanthomonas campestris. The enzyme catalyzes the fourth glycosylation step in the pentasaccharide-P-P-polyisoprenyl assembly, an oligosaccharide diphosphate lipid intermediate in xanthan biosynthesis. GumK has marginal homology to other glycosyltransferases (GTs). It belongs to the CAZy family GT 70, for which no structure is currently available, and indirect biochemical evidence suggests that it also belongs to the GT-B structural superfamily. Crystals of recombinant GumK from X. campestris have been grown that diffract to 1.9 A resolution. Knowledge of the crystal structure of GumK will help in understanding xanthan biosynthesis and its regulation and will also allow a subsequent rational approach to enzyme design and engineering. The multiwavelength anomalous diffraction approach will be used to solve the phase problem.