Phytochemical screening and allelopathic potential of phytoextracts of three invasive grass species

Undoubtedly, it is important to remain vigilant and manage invasive grasses to prevent their spread and mitigate their negative impact on the environment. However, these aggressive plants can also play a beneficial role in certain contexts. For example, several invasive grasses provide valuable forage for livestock and have disease control potential. Therefore, a research experiment was conducted to explore the pros and cons of this approach, not only for surrounding vegetation but also for human and animal disease control. The study is primarily focused on developing livestock feed, plant-derived herbicides, and an understanding of the phytotoxic effects of invasive species. All plant parts of Cenchrus ciliaris L., Polypogon monspeliansis L., and Dicanthium annulatum (Forssk.) Stapf, were tested for their phyto-chemical screening, proximate, and toxicity analysis which was caused by the methanolic extract of these grass species. Qualitative phytochemical screening tests were performed for proximate composition analysis and toxicity assessment essays. The phytochemical analysis revealed the positive results for alkaloids, flavonoids, coumarins, phenols, saponins, and glycosides, while negative for tannins. Comparison of proximate analysis intimated maximum moisture (10.8%) and crude fat (4.1%) in P. monspeliensis, whereas maximum dry matter (84.1%), crude protein (13.95%), crude fiber (11%), and ash (7.2%) in D. annulatum. Five (10, 100, 500, 100, 10,000 ppm) and three (10, 1000, 10,000 ppm) different concentrations of methanolic extract prepared from C. ciliaris, P. monspeliansis, and D. annulatum were used respectively for root inhibition and seed germination essay. Furthermore, three different concentrations (10, 30, 50 mg) of plant fine powder were used for sandwich method test. There was a significant decline in the growth rate of experimental model radish seeds (P > 0.005), and results from sandwich method tests showed suppressed growth of root hairs, inhibiting the anchoring of the radish seed. In comparison, results manifest that; P. monspeliansis indicated an upsurge of inhibition (66.58% at 10,000 ppm), D. annulatum revealed soar germination (75.86% in controlled conditions), and C. ciliaris exhibited dramatic shoot up of inhibition because of sandwich method test (14.02% at 50 mg). In conclusion, although grasses are toxic, it is important to consider the beneficiary account.

Salty and Savoury Snacks Compliance with 2016 and 2019 Sodium Content Targets-Durban Market, South Africa

South Africans consume a significantly high amount of sodium from salty snacks. The study aimed to evaluate savoury snacks (ready-to-eat savoury snacks, flavoured potato crisps and flavoured ready-to-eat, savoury snacks and potato crisps-salt and vinegar only) for compliance with the June 2016 and 2019 target date for sodium reduction as set out by the Department of Health in Regulation 214. It also looked at low-sodium claims made by the evaluated products. The study's research problem is located at the confluence of three critical trends: increasing consumption of sodium-containing salty snacks, increasing sodium-related disease burden and deaths and attempts to regulate sodium intake through regulation as a response. A total sample of 90 products belonging to the above categories was considered. Sodium content information was collected from the selected product packages. The study also applied the Association of Official Analytical Chemists' (AOAC) official method 984.27 in laboratory tests to verify low-sodium claims on the sampled products. The study showed that out of the 90 selected snacks, 26% of the snacks did not meet their 2019 targets, while 4% did not meet their 2016 targets. Fisher's exact tests showed that no snack category had a better inclination toward meeting 2019 tests than others. The laboratory tests showed that 4.4% of the products made a compliant low-sodium content claim (sodium levels below 120 mg Na/100 g), while one made a non-compliant sodium content claim. Among other things, the study recommended increased product compliance monitoring and evaluation, using standardised, rigorous sodium testing and measuring systems, using more consumer-friendly labels and consumer education on sodium labelling.

Physiochemical and Nutritional Characteristics of Ready-to-Use Therapeutic Food Prepared Using Bambara Groundnut-Moringa oleifera Leaf Protein Complex

The utilisation of local raw material in the production of ready-to-use therapeutic food (RUTF) is worthy of exploration for the replacement of full-fat milk, peanut butter, mineral and vitamin mix used in the standard formulation. The objective of this study was to produce snack bars that will meet the protein requirement set by World Health Organisation (WHO) for RUTF (13-16% by weight) using the Bambara groundnut-Moringa oleifera leaf protein complex (BAMOLP). The BAMOnut snack bars were simulated using the mixture preparation procedure in Superpro Designer to determine different proportions of BAMOLP, Moringa oleifera leaf powder, egusi, oats, and millet. Three bars formulated were; BAMOnut-OB3 (BAMOnut Bar enriched with oats and 3% BAMOLP), BAMOnut-MB2 (BAMOnut Bar enriched with millet and 2% BAMOLP), and BAMOnut-OMB5 (BAMOnut Bar enriched with oats, millets, and 5% BAMOLP). The snack bars were assessed for physical, nutritional, proximate and bench-top sensory properties. BAMOnut-OB3 was firmer and less crumbly, with a larger particle size. BAMOnut-OB3 had the lowest water activity, lightest colour and the best amino acid profile. The moisture (4.9%), protein (14.1%), fat (19.3%), carbohydrate (59.7%), and energy (468.6 Kcal/100 g) of BAMOnut-OB3, compare favourably with the requirements for RUTF (2.5% moisture, 13-16% protein, 26-36% fat, 41-58% carbohydrate, and 520-550 Kcal/100 g energy). Local raw materials can be successfully used in the production of RUTF.

Use of Incinerated Eggshells to Produce Pidan

Preserved eggs (pidans) are used in traditional Chinese cuisines. However, the alkaline conditions and metal ions generated during its preparation have caused some concerns. This study developed an innovative process for pidan processing using incinerated eggshell powder, an abundant by-product that can generate a highly alkaline solution and provide calcium ions (Ca2+). Either 0.5, 3, or 5% of the eggshell powder solution was used for basic pickling. Different combinations of ZnSO4 (0.175%), MgCl2 (0.08%), and CuSO4 (0.16%) were added. Duck eggs were pickled for 25 days at 25–27 °C, followed by 14 days of ripening. The pidan processed in 5% eggshell powder containing 0.175% ZnSO4 demonstrated the closest physiochemical and sensory characteristics to commercial pidans. Thus, the results offer a new technique to manufacture pidans and reduce the harmful impact of metal ions on human health and the environment.

In-Country Method Validation of a Paper-Based, Smartphone-Assisted Iron Sensor for Corn Flour Fortification Programs

Food fortification in low-income settings is limited due to the lack of simple quality control sensing tools. In this study, we field validated a paper-based, smartphone-assisted colorimetric assay (Nu3Px) for the determination of iron in fortified flours against the gold standard method, atomic emission spectrometry (AES). Samples from commercial brands (n = 6) were collected from supermarkets, convenience stores, and directly from companies in Mexico and characterized using both Nu3Px and AES. Nu3Px’s final error parameters were quantified (n = 45) via method validation final experiments (replication and comparison of methods experiment). Qualitative pilot testing was conducted, assessing Nu3Px’s accept/reject batch decision making (accept ≥ 40 μg Fe/g flour; reject < 40 μg Fe/g flour) against Mexico’s fortification policy. A modified user-centered design process was followed to develop and evaluate an alternative sampling procedure using affordable tools. Variation of iron content in Mexican corn flours ranged from 23% to 39%. Nu3Px’s random error was 12%, and its bias was 1.79 ± 9.99 μg Fe/g flour. Nu3Px had a true mean difference from AES equal to 0 and similar variances. AES and Nu3Px made similar classifications based on Mexico’s policy. Using simple, affordable tools for sampling resulted in similar output to the traditional sampling preparation (r = 0.952, p = 0.01). The affordable sample preparation kit has similar precision to using analytical tools. The sample preparation kit coupled with the smartphone app and paper-based assay measure iron within the performance parameters required for the application to corn flour fortification programs, such as in the case of Mexico.

A Review of Analytical Methods for Calcium Salts and Cholecalciferol in Dietary Supplements

Dietary supplements composed by the combination of a calcium salt with cholecalciferol (vitamin D₃) are widely used for improving bone health in conditions caused by the deficiency of these compounds in the body. Historically, these supplements have been linked to quality and safety issues. In the case of calcium salts, the presence of potentially toxic contaminants such as lead (Pb) has already been alerted by health authorities from different countries. Meanwhile, cholecalciferol is very unstable under inadequate manufacturing and storage conditions. The content of both compounds in commercial dietary supplements is often found to be in disagreement with the label claims, which can lead to a deficient or excessive nutrient intake by consumers. In this scenario, analyzing these compounds is still a difficult and time-consuming task, which usually requires specific pretreatment procedures and multiple analytical methods due to the inorganic nature of calcium and the organic nature of cholecalciferol. Therefore, this article reviews the analytical methods, described in official compendia and scientific literature, for the determination of calcium salts and cholecalciferol in dietary supplement formulations. We also approached the sample preparation procedures highly required due to the matrix complexity of these materials.

Workflow towards the generation of bioactive hydrolysates from porcine products by combining in silico and in vitro approaches

Food-derived bioactive peptides have generated an increasing interest in the field of health and well-being research. They can act either against the metabolic syndrome, participate in regulating the oxidation balance or act on the immune system. The aim of this study is to develop a workflow to generate bioactive peptides from three porcine offals namely, heart, liver, and lung and one muscle the Longissimus Dorsi, by combining in silico and in vitro approaches. Bioinformatics tools (e.i. BIOPEP and Uniprot) permitted to orientate the choice of enzymes for generating abundant bioactive peptides from the four studied porcine products. With papain and subtilisin, the main bioactivities potentially released were ACE inhibitors, DPP4 inhibitors and antioxidant peptides. An in vitro validation study using papain and subtilisin demonstrated high DPP4 inhibitors and antioxidant bioactivities for the generation of peptides. This work allowed: i) the identification of all proteins that composed porcine heart, liver, lung and LD muscle that could be useful for the scientific community, ii) the development of a workflow to select most abundant proteins in a product while considering abundance factors and iii) the potential of porcine meat and offals to generate DPP4 inhibitors and antioxidant peptides. However, there is still a need in developing new tools in order to face limitations of mass spectrometry for the identification of peptides with less than six amino acids. Such a work may contribute to the development of the circular economy and the innovative creation of value-added products from animal production.

Development of a Paper-Based Sensor Compatible with a Mobile Phone for the Detection of Common Iron Formulas Used in Fortified Foods within Resource-Limited Settings

A lack of quality control tools limits the enforcement of fortification policies. In alignment with the World Health Organization’s ASSURED criteria (affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free, and deliverable), a paper-based assay that interfaces with a smartphone application for the quantification of iron fortificants is presented. The assay is based on the Ferrozine colorimetric method. The reaction started after deposition of the 5 µL aqueous sample and drying. After developing color, pixel intensity values were obtained using a smartphone camera and image processing software or a mobile application, Nu3px. From these values, the actual iron concentration from ferrous sulfate and ferrous fumarate was calculated. The limits of detection, quantification, linearity, range, and errors (systematic and random) were ascertained. The paper-based values from real samples (wheat flour, nixtamalized corn flour, and infant formula) were compared against atomic emission spectroscopy. The comparison of several concentrations of atomic iron between the spectrophotometric and paper-based assays showed a strong positive linear correlation (y = 47.01x + 126.18; R² = 0.9932). The dynamic range (5.0–100 µg/mL) and limit of detection (3.691 µg/mL) of the paper-based assay are relevant for fortified food matrices. Random and systematic errors were 15.9% and + 8.65 µg/g food, respectively. The concept can be applied to limited-resource settings to measure iron in fortified foods.

Quantification of fatty acid and mineral levels of selected seeds, nuts, and oils in Northern Ghana

The purpose of this study was to identify locally available foods that can be utilized by Northern Ghanaians to improve child growth status. An assortment of seeds, nuts and oils were collected from a local market, packaged in plastic containers, and shipped to the US for all analyses. Fatty acids (FAs) were extracted and derivatized to FA methyl esters prior to quantification by GC/MS. ANOVA were conducted on FA concentrations and Tukey's post hoc test was used to compare FA content. Food grade oils, particularly palm oil and shea butter, contained higher saturated and monounsaturated FAs than seeds or nuts. Soybean, was significantly higher in the essential omega-3 FA alpha-linolenic acid (2.98 mg/g), whereas neri seed (68.4 mg/g) and fermented dawadawa (seed; 56.3 mg/g) had significantly higher amounts of total polyunsaturated FAs than all other foods. Iron levels in soybean (353 mg/kg), neri (282 mg/kg) and fermented dawadawa (165 mg/kg) were also the highest of all foods. Together, these foods may be useful for future intervention to curb stunting and iron-deficiency anemia.

Evaluation of X-ray fluorescence spectroscopy as a method for the rapid and direct determination of sodium in cheese

Cheese manufacturers indirectly determine Na in cheese by analysis of Cl using the Volhard method, assuming that all Cl came from NaCl. This method overestimates the actual Na content in cheeses when Na replacers (e.g., KCl) are used. A direct and rapid method for Na detection is needed. X-ray fluorescence spectroscopy (XRF), a mineral analysis technique used in the mining industry, was investigated as an alternative method of Na detection in cheese. An XRF method for the detection of Na in cheese was developed and compared with inductively coupled plasma optical emission spectroscopy (ICP-OES; the reference method for Na in cheese) and Cl analyzer. Sodium quantification was performed by multi-point calibration with cheese standards spiked with NaCl ranging from 0 to 4% Na (wt/wt). The Na concentration of each of the cheese standards (discs: 30mm×7mm) was quantified by the 3 methods. A single laboratory method validation was performed; linearity, precision, limit of detection, and limit of quantification were determined. An additional calibration graph was created using cheese standards made from natural or process cheeses manufactured with different ratios of Na:K. Both Na and K calibration curves were linear for the cheese standards. Sodium was quantified in a variety of commercial cheese samples. The Na data obtained by XRF were in agreement with those from ICP-OES and Cl analyzer for most commercial natural cheeses. The XRF method did not accurately determine Na concentration for several process cheese samples, compared with ICP-OES, likely due to the use of unknown types of Na-based emulsifying salts (ES). When a calibration curve was created for process cheese with the specific types of ES used for this cheese, Na content was successfully predicted in the samples. For natural cheeses, the limit of detection and limit of quantification for Na that can be determined with an acceptable level of repeatability, precision, and trueness was 82 and 246mg/100g of cheese, respectively. Calibration graphs should be created with standards that reflect the concentration range, ratio, and salt type present in the cheeses. This XRF method can be successfully used for the rapid and direct measurement of Na content in a wide variety of natural cheeses. Commercial process cheese manufacturers use proprietary blends of ES. We did find that the XRF technique worked for process cheese when the calibration graphs were created with the specific types of ES actually used.