Padlock oligonucleotides as a tool for labeling superhelical DNA

Reversible stabilization of DNA/PEI complexes by reducible click-linkage between DNA and polymer. A new polyplex concept for lowering polymer quantity

Nonviral transfection of mammalian cells can be performed with electrostatic complexes (polyplexes) between a plasmid DNA (pDNA) encoding a foreign gene and a cationic polymer. However, an excess of the cationic polymer is required for pDNA condensation and polyplexes formation, which generate in vivo toxicity. Here, we present a new concept of polyplexes preparation aiming to reduce the polymer quantity. pDNA was functionalized with 3,6,9-trioxaundecan-1- {4 - [(2-chloroethyl) ethylamino)] - benzylamino}, 11-azide, and polyethyleneimine (lPEI) with reducible dibenzocyclooctyl (SS-DBCO) groups allowing azide-alkyne cycloaddition between pDNA and lPEI after condensation. The size of polyplexes with DBCO-SS-lPEI was smaller than with lPEI due to a stronger DNA condensation thanks to linkages between polymer and pDNA preventing dissociation until disulfide bridges reduction. In vitro transfection showed that the amount of DBCO-SS-lPEI leading to the most efficient polyplexes was three times lower than lPEI. As expected, toxicity in mice was significantly reduced upon intravenous injection of DBCO-SS-lPEI polyplexes at doses where the lPEI polyplexes killed mice. This is probably due to the high stability of the DBCO-SS-lPEI polyplexes which prevented their aggregation in the pulmonary capillaries. Overall, this new concept of polyplexes with DBCO-SS-lPEI offering the possibility of administering higher doses of polyplexes than lPEI and their ability to pass the pulmonary barrier could be favorably exploited for transfection of distant organs or tissues, such as tumors.

Selective attachment of a microtubule interacting peptide to plasmid DNA via a triplex forming oligonucleotide for transfection improvement

In nonviral gene therapy approaches, the linkage of signal molecules to plasmid DNA (pDNA) is of interest for guiding its delivery to the nucleus. Here, we report its linkage to a peptide (P_79-98) mediating migration on microtubules by using a triplex-forming oligonucleotide (TFO). pDNA of 5 kbp and 21 kbp containing 6 and 36 oligopurine • oligopyrimidine sites (TH), respectively, inserted outside the luciferase gene sequence were used. TFO with a dibenzocyclooctyl (DBCO) group in 3' end comprising some Bridged Nucleic Acid bases was conjugated by click chemistry with the peptide carrying an azide function in the C-terminal end. We found the formation of 6 and 18 triplex with pDNA of 5 kbp and 21 kbp, respectively. A twofold increase of the transfection efficiency was observed in the hind-limbs upon Hydrodynamic Limb Vein (HLV) injection in mice of naked P_79-98 -pDNA of 21 kbp. This work paves the way for the selective equipping of pDNA with intracellular targeting molecules while preserving the full expression of the encoded gene.

Applications of triplex DNA nanostructures in sensor development

Triplex DNA nanostructures are one of the most emerging and fascinating self-assembled nanostructures due to their unique nanoparticle-like organization and inherit characteristics. They have attracted numerous interests recently because of their versatile and powerful utility in diverse areas of science and technology, such as clinical or disease diagnosis and stimuli-based drug delivery. This review addresses particularly the utilization of DNA triplexes in the development of biosensors for detecting nucleic acid; strategies in sensing pH, protein activity, ions, or molecules. Finally, an outlook for potential applications of triplex DNA nanoswitches is provided.

CEBA: A new heterobifunctional reagent for plasmid DNA functionalization by click chemistry

Here, we report the synthesis of 3,6,9-trioxaundecan-1-{4-[(2-Chloroethyl)Ethylamino)]-Benzylamino},11-Azide (CEBA). CEBA alkylates the N7 of guanine of DNA thanks its chloroethyl group and can be coupled by a strain-promoted azide-alkyne cycloaddition to an alkynylated molecule. The optimization of the alkylation level of pDNA reveals that the expression of the encoded gene is preserved when it is randomly modified with at most 1 CEBA molecule per 150 bp. We show that the azido group of CEBA allows the linkage via click chemistry of CEBA-pDNA with a fluorophore or a peptide containing a dibenzocyclooctyne (DBCO) function. This new heterobifunctional reagent opens new ways to equip pDNA easily with signal molecules including peptides and nucleic acids without side products providing great interest for non-viral gene therapy.

A capture approach for supercoiled plasmid DNA using a triplex-forming oligonucleotide

Proteins that recognize and bind specific sites in DNA are essential for regulation of numerous biological functions. Such proteins often require a negative supercoiled DNA topology to function correctly. In current research, short linear DNA is often used to study DNA–protein interactions. Although linear DNA can easily be modified, for capture on a surface, its relaxed topology does not accurately resemble the natural situation in which DNA is generally negatively supercoiled. Moreover, specific binding sequences are flanked by large stretches of non-target sequence in vivo. Here, we present a straightforward method for capturing negatively supercoiled plasmid DNA on a streptavidin surface. It relies on the formation of a temporary parallel triplex, using a triple helix forming oligonucleotide containing locked nucleic acid nucleotides. All materials required for this method are commercially available. Lac repressor binding to its operator was used as model system. Although the dissociation constants for both the linear and plasmid-based operator are in the range of 4 nM, the association and dissociation rates of Lac repressor binding to the plasmid-based operator are ∼18 times slower than on a linear fragment. This difference underscores the importance of using a physiologically relevant DNA topology for studying DNA–protein interactions.

High-resolution epifluorescence and time-of-flight secondary ion mass spectrometry chemical imaging comparisons of single DNA microarray spots

DNA microarray assay performance is commonly compromised by spot-spot probe and signal variations as well as heterogeneity within printed microspots. Accurate metrics for captured DNA target signal rely upon uniform spot distribution of both probe and target DNA to yield reliable hybridized signal. While often presumed, this is neither easily achieved nor often proven experimentally. High-resolution imaging techniques were used to determine spot heterogeneity in identical DNA array microspots comprising varied ratios of unlabeled and dye-labeled DNA probes contact-printed onto commercial arraying surfaces. Epifluorescence imaging data for individual array microspots were correlated with time-of-flight secondary ion mass spectrometry (TOF-SIMS) chemical state imaging of the same spots. Epifluorescence imaging intensity distinguished varying DNA density distributed both within a given spot and from spot to spot. TOF-SIMS chemical analysis confirmed these heterogeneous printed DNA distributions by tracking bound Cy3 dye, DNA base, and phosphate specific ion fragments often correlating to fluorescence patterns within identical spots. TOF-SIMS ion fragments originating from probe DNA and Cy3 dye are enriched in microspot centers, correlating with high fluorescence intensity regions. Both TOF-SIMS and epifluorescence support Marangoni flow effects on spot drying, with high-density DNA-Cy3 located in spot centers and nonhomogeneous DNA distribution within printed spots. Microspot image dimensional analysis results for DNA droplet spreading show differing DNA densities across printed spots. The study directly supports different DNA probe chemical and spatial microenvironments within spots that yield spot-spot signal variations known to affect DNA target hybridization efficiencies and kinetics. These variations critically affect probe-target duplex formation and DNA array signal generation.

Specific and reversible photochemical labeling of plasmid DNA using photoresponsive oligonucleotides containing 3-cyanovinylcarbazole

To develop a covalent and specific labeling method for single- and double-stranded plasmid DNA, photoresponsive oligonucleotide containing 3-cyanovinylcarbazole nucleoside was adopted. Single- and double-stranded plasmid DNA was successfully labeled/de-labeled with Cy3 and/or biotin by photoirradiation.

Conjugation of a 3-(1H-phenanthro[9,10-d]imidazol-2-yl)-1H-indole intercalator to a triplex oligonucleotide and to a three-way junction

A new intercalating nucleic acid monomer M comprising a 4-(1-indole)-butane-1,2-diol moiety was synthesized via a classical alkylation reaction of indole-3-carboxaldehyde followed by a condensation reaction with phenanthrene-9,10-dione in the presence of ammonium acetate to form a phenanthroimidazole moiety linked to the indole ring. Insertion of the new intercalator as a bulge into a Triplex Forming Oligonucleotide resulted in good thermal stability of the corresponding Hoogsteen-type triplexes. Molecular modeling supports the possible intercalating ability of M. Hybridisation properties of DNA/DNA and RNA/DNA three-way junctions (TWJ) with M in the branching point were also evaluated by their thermal stability at pH 7. DNA/DNA TWJ showed increase in thermal stability compared to wild type oligonucleotides whereas this was not the case for RNA/DNA TWJ.

Labeling DNA for single-molecule experiments: methods of labeling internal specific sequences on double-stranded DNA

This review is a practical guide for experimentalists interested in specifically labeling internal sequences on double-stranded (ds) DNA molecules for single-molecule experiments. We describe six labeling approaches demonstrated in a single-molecule context and discuss the merits and drawbacks of each approach with particular attention to the amount of specialized training and reagents required. By evaluating each approach according to criteria relevant to single-molecule experiments, including labeling yield and compatibility with cofactors such as Mg(2+), we provide a simple reference for selecting a labeling method for given experimental constraints. Intended for non-specialists seeking accessible solutions to DNA labeling challenges, the approaches outlined emphasize simplicity, robustness, suitability for use by non-biologists, and utility in diverse single-molecule experiments.

Sequence-specific covalent labelling of DNA

Sequence-specific DNA modification is of significance for applications in bio- and nano-technology, medical diagnostics and fundamental life sciences research. Preferentially, labelling should be performed covalently, which avoids doubts about label dissociation from the DNA under various conditions. Several methods to label native DNA have been developed in the last two decades. Triple-helix-forming oligodeoxynucleotides and hairpin polyamides that bind DNA sequences specifically in the major and minor groove respectively were used as targeting devices for subsequent covalent labelling. In addition, enzyme-directed labelling approaches utilizing nicking endonucleases in combination with DNA polymerases or DNA methyltransferases have been employed. This review summarizes various techniques useful for functionalization of long native DNA.

Interfacial behavior of a hairpin DNA probe immobilized on gold surfaces

Neutron reflection has been used in combination with electrochemical and quartz microbalance techniques to characterize a mixed monolayer of thiolated hairpin ss-DNA and 4-mercaptobutan-1-ol monolayer self-assembled on gold before and after hybridization with a cDNA target. Neutron reflection has revealed the opening of the stem-loop configuration of the probe associated with helix formation. This change in conformation correlates to the modification of the electron-transfer resistance associated with the [Fe(CN)6](3-/4-) redox marker present in solution.

The triple helix: 50 years later, the outcome

Triplex-forming oligonucleotides constitute an interesting DNA sequence-specific tool that can be used to target cleaving or cross-linking agents, transcription factors or nucleases to a chosen site on the DNA. They are not only used as biotechnological tools but also to induce modifications on DNA with the aim to control gene expression, such as by site-directed mutagenesis or DNA recombination. Here, we report the state of art of the triplex-based anti-gene strategy 50 years after the discovery of such a structure, and we show the importance of the actual applications and the main challenges that we still have ahead of us.

Labeling of unique sequences in double-stranded DNA at sites of vicinal nicks generated by nicking endonucleases

We describe a new approach for labeling of unique sequences within dsDNA under nondenaturing conditions. The method is based on the site-specific formation of vicinal nicks, which are created by nicking endonucleases (NEases) at specified DNA sites on the same strand within dsDNA. The oligomeric segment flanked by both nicks is then substituted, in a strand displacement reaction, by an oligonucleotide probe that becomes covalently attached to the target site upon subsequent ligation. Monitoring probe hybridization and ligation reactions by electrophoretic mobility retardation assay, we show that selected target sites can be quantitatively labeled with excellent sequence specificity. In these experiments, predominantly probes carrying a target-independent 3′ terminal sequence were employed. At target labeling, thus a branched DNA structure known as 3′-flap DNA is obtained. The single-stranded terminus in 3′-flap DNA is then utilized to prime the replication of an externally supplied ssDNA circle in a rolling circle amplification (RCA) reaction. In model experiments with samples comprised of genomic λ-DNA and human herpes virus 6 type B (HHV-6B) DNA, we have used our labeling method in combination with surface RCA as reporter system to achieve both high sequence specificity of dsDNA targeting and high sensitivity of detection. The method can find applications in sensitive and specific detection of viral duplex DNA.

[Carrier detection in families affected by Duchenne/Becker muscular dystrophy]

Duchenne/Becker muscular dystrophy is a severe, recessive, X-linked neuromuscular disease with an incidence of 1/3500 (Duchenne type) and 1/30,000 (Becker type) in newborn boys. The gene responsible for the Duchenne/Becker muscular dystrophy phenotype is located at Xp21 and its 427 kD protein product is called dystrophin. Deletions, point mutations and rarely duplications can occur almost anywhere in the DMD gene, which makes the molecular diagnosis difficult. Multiple polymerase chain reactions detect 95% of deletions in affected males [2, 4], but are not suitable for carrier detection in female relatives. Southern-blot analysis with six different cDNA probes covers the whole 14 kb dystrophin transcript and allows the detection of female carriers by comparing the intensity of the signals corresponding to the different exons. This method is time consuming compared to the newly introduced multiple ligation-dependent probe amplification method. Multiple ligation-dependent probe amplification is a method suitable for relative quantification of several DNA sequences in one reaction. The authors report results on 93 cases where the carrier status was analysed simultaneously by cDNA hybridisation and multiple ligation-dependent probe amplification technique. In 42 cases the carrier state was confirmed and in this carrier population the authors additionally detected two cases with duplication, two cases with one copy of the whole dystrophin gene and three manifest carrier females. On the basis of these results the MLPA technique, which has been newly introduced in Hungary, proved to be a sensitive and quick method for the detection of carrier state in the DMD/BMD disease. Moreover, the exact deletion or duplication border can be detected and as a result, prediction on the phenotype can be given. This will provide the right therapeutic intervention for the affected patients in the future.

Fluorescence-based detection of short DNA sequences under non-denaturing conditions

The ability of peptide nucleic acid (PNA) to open up duplex DNA in a highly sequence-specific manner makes it possible to detect short DNA sequences on the background of or within genomic DNA under non-denaturing conditions. To do so, chosen marker sites in double-stranded DNA are locally opened by a pair of PNA openers, thus transforming one strand within the target region (20-30 bp) into the single-stranded form. Onto this accessible DNA sequence a circular oligonucleotide probe is assembled, which serves as a template for rolling circle amplification (RCA). Both homogeneous and heterogeneous assay formats are investigated, as are different formats for fluorescence-based amplicon detection. Our recent data with immobilized analytes suggest that marker sequences in plasmid and bacterial chromosomal DNA can be successfully detected.

Multiple topological labeling for imaging single plasmids

Sequence-specific labeling methods for double-stranded DNA are required for mapping protein binding sites or specific DNA structures on circular DNA molecules by high-resolution imaging techniques such as electron and atomic force microscopies. Site-specific labeling can be achieved by ligating a DNA fragment to a stem-loop-triplex-forming oligonucleotide, thereby forming a topologically linked complex. The superhelicity of the plasmid is not altered and the process can be applied to two different target sites simultaneously, using DNA fragments of different sizes. Observation of the labeled plasmids by electron microscopy revealed that, under conditions where the triple helices were stable, the two labels were located at 339+/-34 bp from one another, in agreement with the distance between the two target sequences for triple helix formation (350 bp). Under conditions where the triple helices were not stable, the short DNA fragments could slide away from their target site. The concomitant attachment of two different stable labels makes it possible, for the first time to our knowledge, to label a circular DNA molecule and obtain information on its direction. In addition to its potential applications as a tool for structural investigations of single DNA molecules and their interactions with proteins, this DNA labeling method may also prove useful in biotechnology and gene therapy.

Site-specific labeling of supercoiled DNA

Visualization of site-specific labels in long linear or circular DNA allows unambiguous identification of various local DNA structures. Here we describe a novel and efficient approach to site-specific DNA labeling. The restriction enzyme SfiI binds to DNA but leaves it intact in the presence of calcium and therefore may serve as a protein label of 13 bp recognition sites. Since SfiI requires simultaneous interaction with two DNA recognition sites for stable binding, this requirement is satisfied by providing an isolated recognition site in the DNA target and an additional short DNA duplex also containing the recognition site. The SfiI/DNA complexes were visualized with AFM and the specificity of the labeling was confirmed by the length measurements. Using this approach, two sites in plasmid DNA were labeled in the presence of a large excess of the helper duplex to compete with the formation of looped structures of the intramolecular synaptic complex. We show that the labeling procedure does not interfere with the superhelical tension-driven formation of alternative DNA structures such as cruciforms. The complex is relatively stable at low and high pH (pH 5 and 9) making the developed approach attractive for use at conditions requiring the pH change.

Stem-loop oligonucleotides as tools for labelling double-stranded DNA

We report on a sequence-specific double-stranded DNA labelling strategy in which a stem-loop triplex forming oligonucleotide (TFO) is able to encircle its DNA target. Ligation of this TFO to either a short hairpin oligonucleotide or a long double-stranded DNA fragment leads to the formation of a topological complex. This process requires the hybridization of both extremities of the TFO to each other on a few base pairs. The effects of different factors on the formation of these complexes have been investigated. Efficient complex formation was observed using both GT or TC TFOs. The stem-loop structure enhances the specificity of the complex. The topologically linked TFO remains associated with its target even under conditions that do not favour triple-helix formation. This approach is sufficiently sensitive for detection of a 20-bp target sequence at the subfemtomolar level. This study provides new insights into the mechanics and properties of stem-loop TFOs and their complexes with double-stranded DNA targets. It emphasizes the interest of such molecules in the development of new tools for the specific labelling of short DNA sequences.

Marking of specific sequences in double-stranded DNA molecules--SNP detection and direct observation

In this study, we describe a simple method to mark specific sequences in double-stranded DNA molecules. For the marking, we used two specifically designed oligonucleotides, one of which is complementary to the sequence to be marked and the other, serving as a splint, to make the marking stable and detectable by subsequent various analytical means. In the presence of the two deoxyoligonucleotides, whereas RecA protein-mediated reaction converts the sequence to be marked to a regional triple-stranded structure with the complementary (probing) oligonucleotide, DNA ligase transforms it to a stable multi- (possibly quintuple) stranded structure with the splint oligonucleotide. The whole marking process is simple and completed in a single reaction mixture. Because RecA protein makes the marking to proceed with high fidelity, we were able to mark (detect) SNPs in complex genomes like human's. Furthermore, the structure of the marked sequence is stable and quite distinct enough to be readily detectable by biochemical means or direct observation by scanning probe microscopy.

Ligand-mediated transcription elongation control using triplex-based padlock oligonucleotides

Triplex-forming oligonucleotides (TFOs) provide useful tools for the artificial regulation of gene expression at the transcriptional level. They can become topologically linked to their DNA target upon circularization, thereby forming very stable triple helical structures. These "padlock oligonucleotides" are able to interfere with transcription elongation when their target site is located in the transcribed region of a gene. In vitro transcription experiments showed that a bacterial RNA polymerase was stopped at the site of triple-helix formation, whereas expression of a reporter gene was inhibited in live cells. In both cases, the padlock oligonucleotide was more efficient at inhibiting transcription elongation than a linear TFO, and the inhibition was observed only in the presence of a triplex stabilizing agent. These results provide new insights into the ligand-modulated locking of padlock oligonucleotides around their DNA target.

Sequence-specific fluorescent labeling of double-stranded DNA observed at the single molecule level

Fluorescent labeling of a short sequence of double-stranded DNA (dsDNA) was achieved by ligating a labeled dsDNA fragment to a stem-loop triplex forming oligonucleotide (TFO). After the TFO has wound around the target sequence by ligand-induced triple helix formation, its extremities hybridize to each other, leaving a dangling single-stranded sequence, which is then ligated to a fluorescent dsDNA fragment using T4 DNA ligase. A non-repeated 15 bp sequence present on lambda DNA was labeled and visualized by fluorescence microscopy after DNA combing. The label was found to be attached at a specific position located at 4.2 +/- 0.5 kb from one end of the molecule, in agreement with the location of the target sequence for triple helix formation (4.4 kb from one end). In addition, an alternative combing process was noticed in which a DNA molecule becomes attached to the combing slide from the label rather than from one of its ends. The method described herein provides a new tool for the detection of very short sequences of dsDNA and offers various perspectives in the micromanipulation of single DNA molecules.

Earrings and padlocks for the double helix: topological labeling of duplex DNA

Concatenation of hybridization probe with DNA target is crucial for highly localized detection of targeted sequences and might also be used in various gene-therapy applications. Several approaches based on the attachment of a circular oligonucleotide to designated DNA sites have been proposed. Recently, earring-like probes provide a true topological linkage between a probe and the target, thus allowing the DNA labeling by essentially immobile tags. The latest development in this direction takes advantage of oligonucleotide uptake by supercoiled DNA and is an important step forward.

Site-specific labeling of supercoiled DNA at the A+T rich sequences

Progress in structural biology studies of supercoiled DNA and its complexes with regulatory proteins depends on the availability of reliable and routine procedures for site-specific labeling of circular molecules. For this, we made use of oligonucleotide uptake by plasmid DNA under negative superhelical tension. Subsequent circularization of the oligonucleotide label facilitated by an oligonucleotide scaffold results in its threading between the two strands of duplex DNA. Several lines of evidence, including direct AFM mapping of the label, show that the circular oligonucleotide is stably localized at its target, an A+T rich region. The specific binding mode when the oligonucleotide threads the double helix results in a DNA kink that tends to occupy an apical position in a plectonemically wound supercoiled DNA, similar to the positioning of an A-tract bend. Site-specific labels may allow visualization techniques, such as electron and atomic force microscopies, to reliably map protein binding sites, identify local alternative structures in supercoiled DNA, and monitor structural dynamics of DNA molecules in real time. Site-specific oligonucleotide reactions with DNA may also have application in biotechnology and gene therapy.

Coupling of a targeting peptide to plasmid DNA using a new type of padlock oligonucleotide

We have recently described a new method for attaching padlock oligonucleotides to supercoiled plasmid DNA at specific sequences. A variant of this method has been developed in order to allow the coupling of targeting moieties to plasmids using a convenient strategy. After sequence-specific winding around the double-stranded target DNA sequence by ligand-induced triple helix formation, the extremities of a triplex-forming oligonucleotide hybridize to each other, leaving a dangling single-stranded sequence, which is then ligated to a hairpin oligonucleotide using T4 DNA ligase. Any targeting moiety may be attached to the hairpin oligonucleotide. This strategy was used to attach an NLS peptide to a luciferase-expressing plasmid. Despite the presence of the padlock oligonucleotide, the reporter gene was efficiently expressed after transfection of the plasmid in HeLa or T24 cells, using either cationic lipids or cationic polymers as transfecting agents. However, no increase in gene expression could be observed as a result of peptide attachment. Nevertheless, the coupling strategy described in this paper may find applications as a tool for plasmid functionalization in other targeting experiments, and may lead to the development of improved vectors for gene therapy.