The k-junction motif in RNA structure

Structure and ion-dependent folding of k-junctions

k-Junctions are elaborated forms of kink turns with an additional helix on the nonbulged strand, thus forming a three-way helical junction. Two were originally identified in the structures of Arabidopsis and Escherichia coli thiamine pyrophosphate (TPP) riboswitches, and another called DUF-3268 was tentatively identified from sequence information. In this work we show that the Arabidopsis and E. coli riboswitch k-junctions fold in response to the addition of magnesium or sodium ions, and that atomic mutations that should disrupt key hydrogen bonding interactions greatly impair folding. Using X-ray crystallography, we have determined the structure of the DUF-3268 RNA and thus confirmed that it is a k-junction. It also folds upon the addition of metal ions, though requiring a 40-fold lower concentration of either divalent or monovalent ions. The key difference between the DUF-3268 and riboswitch k-junctions is the lack of nucleotides inserted between G1b and A2b in the former. We show that this insertion is primarily responsible for the difference in folding properties. Finally, we show that the DUF-3268 can functionally substitute for the k-junction in the E. coli TPP riboswitch such that the chimera can bind the TPP ligand, although less avidly.

Structure and folding of four putative kink turns identified in structured RNA species in a test of structural prediction rules

k-Turns are widespread key architectural elements that occur in many classes of RNA molecules. We have shown previously that their folding properties (whether or not they fold into their tightly kinked structure on addition of metal ions) and conformation depend on their local sequence, and we have elucidated a series of rules for prediction of these properties from sequence. In this work, we have expanded the rules for prediction of folding properties, and then applied the full set to predict the folding and conformation of four probable k-turns we have identified amongst 224 structured RNA species found in bacterial intergenenic regions by the Breaker lab (1). We have analyzed the ion-dependence of folding of the four k-turns using fluorescence resonance energy transfer, and determined the conformation of two of them using X-ray crystallography. We find that the experimental data fully conform to both the predicted folding and conformational properties. We conclude that our folding rules are robust, and can be applied to new k-turns of unknown characteristics with confidence.

Using an L7Ae-Tethered, Hydroxyl Radical-Mediated Footprinting Strategy to Identify and Validate Kink-Turns in RNAs

Kink-turns are important RNA structural modules that facilitate long-range tertiary interactions and form binding sites for members of the L7Ae family of proteins. Present in a wide variety of functional RNAs, kink-turns play key organizational roles in many RNA-based cellular processes, including translation, modification, and tRNA biogenesis. It is important to determine the contribution of kink-turns to the overall architecture of resident RNAs, as these modules dictate ribonucleoprotein (RNP) assembly and function. This chapter describes a site-directed, hydroxyl radical-mediated footprinting strategy that utilizes L7Ae-tethered chemical nucleases to experimentally validate computationally identified kink-turns in any RNA and under a wide variety of conditions. The work plan described here uses the catalytic RNase P RNA as an example to provide a blueprint for using this footprinting method to map RNA-protein interactions in other RNP complexes.

Classification and function of RNA-protein interactions

Almost all RNAs need to interact with proteins to fully exert their functions, and proteins also bind to RNAs to act as regulators. It has now become clear that RNA-protein interactions play important roles in many biological processes among organisms. Despite the great progress that has been made in the field, there is still no precise classification system for RNA-protein interactions, which makes it challenging to further decipher the functions and mechanisms of these interactions. In this review, we propose four different categories of RNA-protein interactions according to their basic characteristics: RNA motif-dependent RNA-protein interactions, RNA structure-dependent RNA-protein interactions, RNA modification-dependent RNA-protein interactions, and RNA guide-based RNA-protein interactions. Moreover, the integration of different types of RNA-protein interactions and the regulatory factors implicated in these interactions are discussed. Furthermore, we emphasize the functional diversity of these four types of interactions in biological processes and disease development and assess emerging trends in this exciting research field. This article is categorized under: RNA Interactions with Proteins and Other Molecules > Protein-RNA Interactions: Functional Implications RNA Interactions with Proteins and Other Molecules > Protein-RNA Recognition RNA Processing > RNA Editing and Modification.

Hidden Structural Modules in a Cooperative RNA Folding Transition

Large-scale, cooperative rearrangements underlie the functions of RNA in RNA-protein machines and gene regulation. To understand how such rearrangements are orchestrated, we used high-throughput chemical footprinting to dissect a seemingly concerted rearrangement in P5abc RNA, a paradigm of RNA folding studies. With mutations that systematically disrupt or restore putative structural elements, we found that this transition reflects local folding of structural modules, with modest and incremental cooperativity that results in concerted behavior. First, two distant secondary structure changes are coupled through a bridging three-way junction and Mg²⁺-dependent tertiary structure. Second, long-range contacts are formed between modules, resulting in additional cooperativity. Given the sparseness of RNA tertiary contacts after secondary structure formation, we expect that modular folding and incremental cooperativity are generally important for specifying functional structures while also providing productive kinetic paths to these structures. Additionally, we expect our approach to be useful for uncovering modularity in other complex RNAs.

The kink-turn in the structural biology of RNA

The kink-turn (k-turn) is a widespread structural motif found in functional RNA species. It typically comprises a three-nucleotide bulge followed by tandem trans sugar edge-Hoogsteen G:A base pairs. It introduces a sharp kink into the axis of duplex RNA, juxtaposing the minor grooves. Cross-strand H-bonds form at the interface, accepted by the conserved adenine nucleobases of the G:A basepairs. Alternative acceptors for one of these divides the k-turns into two conformational classes N3 and N1. The base pair that follows the G:A pairs (3b:3n) determines which conformation is adopted by a given k-turn. k-turns often mediate tertiary contacts in folded RNA species and frequently bind proteins. Common k-turn binding proteins include members of the L7Ae family, such as the human 15·5k protein. A recognition helix within these proteins binds in the widened major groove on the outside of the k-turn, that makes specific H-bonds with the conserved guanine nucleobases of the G:A pairs. L7Ae binds with extremely high affinity, and single-molecule data are consistent with folding by conformational selection. The standard, simple k-turn can be elaborated in a variety of ways, that include the complex k-turns and the k-junctions. In free solution in the absence of added metal ions or protein k-turns do not adopt the tightly-kinked conformation. They undergo folding by the binding of proteins, by the formation of tertiary contacts, and some (but not all) will fold on the addition of metal ions. Whether or not folding occurs in the presence of metal ions depends on local sequence, including the 3b:3n position, and the -1b:-1n position (5' to the bulge). In most cases -1b:-1n = C:G, so that the 3b:3n position is critical since it determines both folding properties and conformation. In general, the selection of these sequence matches a given k-turn to its biological requirements. The k-turn structure is now very well understood, to the point at which they can be used as a building block for the formation of RNA nano-objects, including triangles and squares.

Adventures with RNA graphs

The structure of RNA has been a natural subject for mathematical modeling, inviting many innovative computational frameworks. This single-stranded polynucleotide chain can fold upon itself in numerous ways to form hydrogen-bonded segments, imperfect with single-stranded loops. Illustrating these paired and non-paired interaction networks, known as RNA's secondary (2D) structure, using mathematical graph objects has been illuminating for RNA structure analysis. Building upon such seminal work from the 1970s and 1980s, graph models are now used to study not only RNA structure but also describe RNA's recurring modular units, sample the conformational space accessible to RNAs, predict RNA's three-dimensional folds, and apply the combined aspects to novel RNA design. In this article, we outline the development of the RNA-As-Graphs (or RAG) approach and highlight current applications to RNA structure prediction and design.

Gold nanocrystal labels provide a sequence-to-3D structure map in SAXS reconstructions

Small-angle x-ray scattering (SAXS) is a powerful technique to probe the structure of biological macromolecules and their complexes under virtually arbitrary solution conditions, without the need for crystallization. While it is possible to reconstruct molecular shapes from SAXS data ab initio, the resulting electron density maps have a resolution of ~1 nm and are often insufficient to reliably assign secondary structure elements or domains. We show that SAXS data of gold-labeled samples significantly enhance the information content of SAXS measurements, allowing the unambiguous assignment of macromolecular sequence motifs to specific locations within a SAXS structure. We first demonstrate our approach for site-specifically internally and end-labeled DNA and an RNA motif. In addition, we present a protocol for highly uniform and site-specific labeling of proteins with small (~1.4 nm diameter) gold particles and apply our method to the signaling protein calmodulin. In all cases, the position of the small gold probes can be reliably identified in low-resolution electron density maps. Enhancing low-resolution measurements by site-selective gold labeling provides an attractive approach to aid modeling of a large range of macromolecular systems.

Using sequence signatures and kink-turn motifs in knowledge-based statistical potentials for RNA structure prediction

Kink turns are widely occurring motifs in RNA, located in internal loops and associated with many biological functions including translation, regulation and splicing. The associated sequence pattern, a 3-nt bulge and G-A, A-G base-pairs, generates an angle of ∼50° along the helical axis due to A-minor interactions. The conserved sequence and distinct secondary structures of kink-turns (k-turn) suggest computational folding rules to predict k-turn-like topologies from sequence. Here, we annotate observed k-turn motifs within a non-redundant RNA dataset based on sequence signatures and geometrical features, analyze bending and torsion angles, and determine distinct knowledge-based potentials with and without k-turn motifs. We apply these scoring potentials to our RAGTOP (RNA-As-Graph-Topologies) graph sampling protocol to construct and sample coarse-grained graph representations of RNAs from a given secondary structure. We present graph-sampling results for 35 RNAs, including 12 k-turn and 23 non k-turn internal loops, and compare the results to solved structures and to RAGTOP results without special k-turn potentials. Significant improvements are observed with the updated scoring potentials compared to the k-turn-free potentials. Because k-turns represent a classic example of sequence/structure motif, our study suggests that other such motifs with sequence signatures and unique geometrical features can similarly be utilized for RNA structure prediction and design.

Opportunities and Challenges in RNA Structural Modeling and Design

We describe opportunities and challenges in RNA structural modeling and design, as recently discussed during the second Telluride Science Research Center workshop organized in June 2016. Topics include fundamental processes of RNA, such as structural assemblies (hierarchical folding, multiple conformational states and their clustering), RNA motifs, and chemical reactivity of RNA, as used for structural prediction and functional inference. We also highlight the software and database issues associated with RNA structures, such as the multiple approaches for motif annotation, the need for frequent database updating, and the importance of quality control of RNA structures. We discuss various modeling approaches for structure prediction, mechanistic analysis of RNA reactions, and RNA design, and the complementary roles that both atomistic and coarse-grained approaches play in such simulations. Collectively, as scientists from varied disciplines become familiar and drawn into these unique challenges, new approaches and collaborative efforts will undoubtedly be catalyzed.

The solution structural ensembles of RNA kink-turn motifs and their protein complexes

With the growing number of crystal structures of RNA and RNA-protein complexes, a critical next step is understanding the dynamic solution behavior of these entities in terms of conformational ensembles and energy landscapes. To this end, we have used X-ray scattering interferometry (XSI) to probe the ubiquitous RNA kink-turn motif and its complexes with the canonical kink-turn binding protein L7Ae. XSI revealed that the folded kink-turn is best described as a restricted conformational ensemble. The ions present in solution alter the nature of this ensemble, and protein binding can perturb the kink-turn ensemble without collapsing it to a unique state. This study demonstrates how XSI can reveal structural and ensemble properties of RNAs and RNA-protein complexes and uncovers the behavior of an important RNA-protein motif. This type of information will be necessary to understand, predict and engineer the behavior and function of RNAs and their protein complexes.

The Kink Turn, a Key Architectural Element in RNA Structure

Kink turns (k-turns) are widespread structural elements that introduce an axial bend into duplex RNA with an included angle of 50°. These mediate key tertiary interactions and bind specific proteins including members of the L7Ae family. The standard k-turn comprises a three-nucleotide bulge followed by G·A and A·G pairs. The RNA kinks by an association of the two minor grooves, stabilized by the formation of a number of key cross-strand hydrogen bonds mostly involving the adenine bases of the G·A and A·G pairs. The k-turns may be divided into two conformational classes, depending on the receptor for one of these hydrogen bonds. k-turns become folded by one of three different processes. Some, but not all, k-turns become folded in the presence of metal ions. Whether or not a given k-turn is folded under these conditions is determined by its sequence. We present a set of rules for the prediction of folding properties and the structure adopted on local sequence.

The L7Ae protein binds to two kink-turns in the Pyrococcus furiosus RNase P RNA

The RNA-binding protein L7Ae, known for its role in translation (as part of ribosomes) and RNA modification (as part of sn/oRNPs), has also been identified as a subunit of archaeal RNase P, a ribonucleoprotein complex that employs an RNA catalyst for the Mg²⁺-dependent 5′ maturation of tRNAs. To better understand the assembly and catalysis of archaeal RNase P, we used a site-specific hydroxyl radical-mediated footprinting strategy to pinpoint the binding sites of Pyrococcus furiosus (Pfu) L7Ae on its cognate RNase P RNA (RPR). L7Ae derivatives with single-Cys substitutions at residues in the predicted RNA-binding interface (K42C/C71V, R46C/C71V, V95C/C71V) were modified with an iron complex of EDTA-2-aminoethyl 2-pyridyl disulfide. Upon addition of hydrogen peroxide and ascorbate, these L7Ae-tethered nucleases were expected to cleave the RPR at nucleotides proximal to the EDTA-Fe–modified residues. Indeed, footprinting experiments with an enzyme assembled with the Pfu RPR and five protein cofactors (POP5, RPP21, RPP29, RPP30 and L7Ae–EDTA-Fe) revealed specific RNA cleavages, localizing the binding sites of L7Ae to the RPR's catalytic and specificity domains. These results support the presence of two kink-turns, the structural motifs recognized by L7Ae, in distinct functional domains of the RPR and suggest testable mechanisms by which L7Ae contributes to RNase P catalysis.

A critical base pair in k-turns that confers folding characteristics and correlates with biological function

Kink turns (k-turns) are widespread elements in RNA that mediate tertiary contacts by kinking the helical axis. We have found that the ability of k-turns to undergo ion-induced folding is conferred by a single base pair that follows the conserved A·G pairs, that is, the 3b·3n position. A Watson–Crick pair leads to an inability to fold in metal ions alone, while 3n=G or 3b=C (but not both) permits folding. Crystallographic study reveals two hydrated metal ions coordinated to O6 of G3n and G2n of Kt-7. Removal of either atom impairs Mg²⁺-induced folding in solution. While SAM-I riboswitches have 3b·3n sequences that would predispose them to ion-induced folding, U4 snRNA are strongly biased to an inability to such folding. Thus riboswitch sequences allow folding to occur independently of protein binding, while U4 should remain unfolded until bound by protein. The empirical rules deduced for k-turn folding have strong predictive value.

The k-turn is a widespread RNA element that adopts a kinked structure that mediates tertiary contacts and frequently binds specific proteins. Here, McPhee et al. show that the ability of a given k-turn to fold in the presence of metal ions alone—or to otherwise require protein binding—is attributable to a specific base pair.

The K-turn motif in riboswitches and other RNA species

The kink turn is a widespread structure motif that introduces a tight bend into the axis of duplex RNA. This generally functions to mediate tertiary interactions, and to serve as a specific protein binding site. K-turns or closely related structures are found in at least seven different riboswitch structures, where they function as key architectural elements that help generate the ligand binding pocket. This article is part of a Special Issue entitled: Riboswitches.