CHARACTERIZATION OF A LANTHANUM BROMIDE DETECTOR FOR EYE LENS DOSIMETRY AT THE CANDU NUCLEAR POWER PLANTS BASED ON DIRECT MEASUREMENTS OF THE GAMMA-RAY SPECTRA

High-rate Gamma Spectrometry Using a LaBr3(Ce) Scintillator with a Fast Pulse Shaping

ABSTRACT

The performance of a LaBr3(Ce) gamma spectrometer at high count rates was investigated up to an input count rate of 1.3 Mcps. In order to make its pulse processing faster, a preamplifier provided by the detector manufacturer was eliminated, and the signal from the photomultiplier tube was fed directly to a digital pulse processing system. To accomplish both fast pulse processing and good energy resolution, the pulse-shaping parameters were optimized at a low count rate of 1.5 kcps, and then measurements were carried out at various count rates. Input count rates ranging from 1.5 kcps to 21 kcps were produced using a set of 137Cs resin sources, while higher rates between 45 kcps and 1.3 Mcps were produced using a 1.2-GBq 137Cs source. The spectrometer showed an excellent performance for the input rate up to 150 kcps, while the dead time increased rapidly for the input rates above 150 kcps. The system dead time has been improved greatly by eliminating the preamplifier.

Optimization and characterization of a coincidence beta-ray spectrometer

Aimed at beta spectrometry and dosimetry for mixed beta-gamma fields, a Si-plastic scintillator coincidence beta-ray spectrometer has been developed. The spectrometer collects pure beta-ray spectra by rejecting the gamma-ray detection events through coincidence. Both pulse height and arrival time of each detection event were recorded in list mode by a compact digital processing system. Spectral measurements were carried out using mixed beta-gamma fields from 90Sr/90Y and 137Cs sources for various beta and gamma count rates to evaluate the system performance. Coincidence beta spectra were collected for four fixed beta count rates (7.3-241 cps) from 90Sr/90Y while the gamma count rate from 137Cs was varied from 500 to 8000 cps. The coincidence beta spectrum was stable and unperturbed by the gamma detection events for most measurements while notable perturbation was observed in the low energy region when the beta to gamma count ratio is very low.

Current status of eye-lens dosimetry in Canada

For occupational exposures in planned exposure situations International Commission on Radiological Protection (ICRP) publication 118 recommends an equivalent dose limit for the lens of the eye of 20 mSv yr^-1averaged over five years with no single year exceeding 50 mSv. This constitutes a reduction from the previous limit of 150 mSv yr^-1. The Canadian nuclear regulator, the Canadian Nuclear Safety Commission, responded to the ICRP recommendation by initiating amendments to theRadiation Protection Regulationsthrough a discussion paper which was published for comment by interested stakeholders in 2013. The revised equivalent dose limit of 50 mSv in a one-year dosimetry period for nuclear energy workers came into effect in January 2021. This paper presents the outcome of discussions with Canadian stakeholders in diverse fields of radiological work which focused on the implementation of the reduced occupational equivalent dose limit for the lens of the eye in their respective workplaces. These exchanges highlighted the existing practices for monitoring doses to the lens of the eye and identified current technological gaps. The exchanges also identified that, in many cases, the lens of the eye dose is anticipated to be well within the new dose limit despite some of the gaps in technology. The paper also presents the monitoring and eye-lens dose assessment solutions that are available based on different methods for eye-lens monitoring; presented together with criteria for their use.

Eye lens dosimetry in Canadian CANDU nuclear power plants based on operational dosimetric quantities Hp(10) and Hp(0.07)

In this article, we present a methodology for performing eye lens dosimetry in CANDU nuclear power plants using an existing and highly accurate Harshaw 4-element TLD-700 dosemeter. This dosemeter, which has been specially designed for Ontario Power Generation (OPG) and Bruce Power (BP), measures the deep and shallow personal dose equivalent quantities H_p(10) and H_p(0.07), respectively. Using these measured personal dose equivalent quantities and applying a beta-ray strength scaling factor to the H_p(0.07) measurement in particular, we have developed an algorithm that can be used to calculate the dose to the lens of the eye in mixed beta-gamma fields. This scaling factor has been developed and is primarily based on results obtained from extensive collaborative study, performed by Ontario Power Generation (OPG), Bruce Power (BP) and McMaster University, through Candu Owners Group (COG) support (Bohra et al., 2021; Laranjeiro et al., 2020). Furthermore, scaling factor F, also includes effects of protective glass eyewear and results from Whole body dosimetry intercomparison exercises. The algorithm to calculate eye lens dose at CANDU power plants has been developed, based on this scaling factor and operational dosimetric quantities H_p(10) and H_p(0.07).

Quantification of pure beta spectra in mixed beta gamma fields as part of eye lens dosimetry at CANDU power plants

To address the issue of eye lens dosimetry in nuclear industry, we initiated the project to quantify the beta and gamma-ray source term in CANDU power plants and to convert this source term into dosimetric quantities of interest, such as eye lens dose and personal dose equivalents H_p(10), H_p(0.07). This way, the eye lens dose can be compared with dosimetric operational quantities to evaluate whether independent dosimetry is required for eye lens protection, or present dosimetry is adequate.