Characterisation of radioactive waste products associated with plant decommissioning

TCAD simulation for alpha-particle spectroscopy using SIC Schottky diode

There is a growing requirement of alpha spectroscopy in the fields context of environmental radioactive contamination, nuclear waste management, site decommissioning and decontamination. Although silicon-based alpha-particle detection technology is mature, high leakage current, low displacement threshold and radiation hardness limits the operation of the detector in harsh environments. Silicon carbide (SiC) is considered to be excellent material for radiation detection application due to its high band gap, high displacement threshold and high thermal conductivity. In this report, an alpha-particle-induced electron-hole pair generation model for a reverse-biased n-type SiC Schottky diode has been proposed and verified using technology computer aided design (TCAD) simulations. First, the forward-biased I-V characteristics were studied to determine the diode ideality factor and compared with published experimental data. The ideality factor was found to be in the range of 1.4-1.7 for a corresponding temperature range of 300-500 K. Next, the energy-dependent, alpha-particle-induced EHP generation model parameters were optimised using transport of ions in matter (TRIM) simulation. Finally, the transient pulses generated due to alpha-particle bombardment were analysed for (1) different diode temperatures (300-500 K), (2) different incident alpha-particle energies (1-5 MeV), (3) different reverse bias voltages of the 4H-SiC-based Schottky diode (-50 to -250 V) and (4) different angles of incidence of the alpha particle (0°-70°).The above model can be extended to other (wide band-gap semiconductor) device technologies useful for radiation-sensing application.

Activity and radiation protection studies for the W-Ta target of CSNS

The Chinese government initiated a conceptual design for the project of China Spallation Neutron Source (CSNS), which consists of an H-linear accelerator, a rapid cycling synchrotron accelerating the beam to 1.6 GeV, a target station converting proton beam into lower energy (<1 eV) neutron beam optimised to instruments for neutron scattering applications. The facility operates at 25-Hz repetition rate with an initial beam power of 100 kW. In the target station, the target-moderator-reflector (TMR) components are exposed to the intensive fluxes of high-energy hadrons and become highly radioactive as a result of long-time irradiation. In this paper, the activity of the TMR components are calculated using the Monte Carlo code system LAHET&MCNP4C&CINDER'90. Comparisons of some results with that simulated by FLUKA code are also performed. Detailed analyses of the radionuclides and their characters in the tantalum clad tungsten target (W-Ta target) are important for the radiation protection of the CSNS target station. The shielding design of the service cell for the decay gamma ray induced from the W-Ta target and its vessel shows that the ambient dose rate decreases exponentially with increasing heavy concrete thickness. And 80 cm thickness of heavy concrete for each side of the service cell can satisfy the safety requirement.