Characteristics of dosemeter types for skin dose measurements in practice

A practical method for skin dose estimation in interventional cardiology based on fluorographic DICOM information

A practical method for skin dose estimation for interventional cardiology patients has been developed to inform pre-procedure planning and post-procedure patient management. Absorbed dose to the patient skin for certain interventional radiology procedures can exceed thresholds for deterministic skin injury, requiring documentation within the patient notes and appropriate patient follow-up. The primary objective was to reduce uncertainty associated with current methods, particularly surrounding field overlap. This was achieved by considering rectangular field geometry incident on a spherical patient model in a polar coordinate system. The angular size of each field was quantified at surface of the sphere, i.e. the skin surface. Computer-assisted design software enabled the modelling of a sufficient dataset that was subsequently validated with radiochromic film. Modelled overlap was found to agree with overlap measured using film to within 2.2° ± 2.0°, showing that the overall error associated with the model was < 1 %. Mathematical comparison against exposure data extracted from procedural Digital Imaging and Communication in Medicine files was used to generate a graphical skin dose map, demonstrating the dose distribution over a sphere centred at the interventional reference point. Dosimetric accuracy of the software was measured as between 3.5 and 17 % for different variables.

A silicon strip detector dose magnifying glass for IMRT dosimetry

PURPOSE

Intensity modulated radiation therapy (IMRT) allows the delivery of escalated radiation dose to tumor while sparing adjacent critical organs. In doing so, IMRT plans tend to incorporate steep dose gradients at interfaces between the target and the organs at risk. Current quality assurance (QA) verification tools such as 2D diode arrays, are limited by their spatial resolution and conventional films are nonreal time. In this article, the authors describe a novel silicon strip detector (CMRP DMG) of high spatial resolution (200 microm) suitable for measuring the high dose gradients in an IMRT delivery.

METHODS

A full characterization of the detector was performed, including dose per pulse effect, percent depth dose comparison with Farmer ion chamber measurements, stem effect, dose linearity, uniformity, energy response, angular response, and penumbra measurements. They also present the application of the CMRP DMG in the dosimetric verification of a clinical IMRT plan.

RESULTS

The detector response changed by 23% for a 390-fold change in the dose per pulse. A correction function is derived to correct for this effect. The strip detector depth dose curve agrees with the Farmer ion chamber within 0.8%. The stem effect was negligible (0.2%). The dose linearity was excellent for the dose range of 3-300 cGy. A uniformity correction method is described to correct for variations in the individual detector pixel responses. The detector showed an over-response relative to tissue dose at lower photon energies with the maximum dose response at 75 kVp nominal photon energy. Penumbra studies using a Varian Clinac 21EX at 1.5 and 10.0 cm depths were measured to be 2.77 and 3.94 mm for the secondary collimators, 3.52 and 5.60 mm for the multileaf collimator rounded leaf ends, respectively. Point doses measured with the strip detector were compared to doses measured with EBT film and doses predicted by the Philips Pinnacle treatment planning system. The differences were 1.1% +/- 1.8% and 1.0% +/- 1.6%, respectively. They demonstrated the high temporal resolution capability of the detector readout system, which will allow one to investigate the temporal dose pattern of IMRT and volumetric modulated are therapy (VMAT) deliveries.

CONCLUSIONS

The CMRP silicon strip detector dose magnifying glass interfaced to a TERA ASIC DAQ system has high spatial and temporal resolution. It is a novel and valuable tool for QA in IMRT dose delivery and for VMAT dose delivery.

The ICRU (International Commission on Radiation Units and Measurements): its contribution to dosimetry in diagnostic and interventional radiology

The ICRU (International Commission on Radiation Units and Measurements was created to develop a coherent system of quantities and units, universally accepted in all fields where ionizing radiation is used. Although the accuracy of dose or kerma may be low for most radiological applications, the quantity which is measured must be clearly specified. Radiological dosimetry instruments are generally calibrated free-in-air in terms of air kerma. However, to estimate the probability of harm at low dose, the mean absorbed dose for organs is used. In contrast, at high doses, the likelihood of harm is related to the absorbed dose at the site receiving the highest dose. Therefore, to assess the risk of deterministic and stochastic effects, a detailed knowledge of absorbed dose distribution, organ doses, patient age and gender is required. For interventional radiology, where the avoidance of deterministic effects becomes important, dose conversion coefficients are generally not yet developed.