Paediatric CT optimisation utilising Catphan® 600 and age-specific anthropomorphic phantoms

The optimisation of paediatric CT examinations in Scotland: phase one; benchmarking current performance

To benchmark the dose from paediatric head and chest examinations on computed tomography (CT) scanners throughout Scotland, to identify scanners that may require optimisation and to provide optimisation advice based on the protocols from better performing scanners. Anthropomorphic phantoms corresponding to 1, 5 and 10 year olds were sent to 50 CT scanners around Scotland. Head and chest examinations were undertaken by local staff using local techniques on each scanner with each phantom, and details of the protocols used were recorded. Computed tomography dose index (CTDI)_voland dose length product (DLP) were recorded post-scan. There is a significant variation in performance throughout Scotland. For head examinations, the highest DLP is 13 times the lowest for an equivalent sized phantom. For chest examinations, the highest is 128 times the lowest for an equivalent sized phantom. The wide range of CT dose measurements indicates the potential for variation in image quality across Scotland. Feedback has been provided to all participating sites on their individual results compared to the national data set. Specific feedback was provided where relevant on potential considerations for optimisation. Scanners that may be undertaking paediatric CT head and chest examinations in a sub-optimal manner throughout Scotland have been identified along with those aspects of a scan protocol that are most likely to lead to sub-optimal performance.

A comprehensive assessment of physical image quality of five different scanners for head CT imaging as clinically used at a single hospital centre-A phantom study

Nowadays, given the technological advance in CT imaging and increasing heterogeneity in characteristics of CT scanners, a number of CT scanners with different manufacturers/technologies are often installed in a hospital centre and used by various departments. In this phantom study, a comprehensive assessment of image quality of 5 scanners (from 3 manufacturers and with different models) for head CT imaging, as clinically used at a single hospital centre, was hence carried out. Helical and/or sequential acquisitions of the Catphan-504 phantom were performed, using the scanning protocols (CTDI_vol range: 54.7–57.5 mGy) employed by the staff of various Radiology/Neuroradiology departments of our institution for routine head examinations. CT image quality for each scanner/acquisition protocol was assessed through noise level, noise power spectrum (NPS), contrast-to-noise ratio (CNR), modulation transfer function (MTF), low contrast detectability (LCD) and non-uniformity index analyses. Noise values ranged from 3.5 HU to 5.7 HU across scanners/acquisition protocols. NPS curves differed in terms of peak position (range: 0.21–0.30 mm^-1). A substantial variation of CNR values with scanner/acquisition protocol was observed for different contrast inserts. The coefficient of variation (standard deviation divided by mean value) of CNR values across scanners/acquisition protocols was 18.3%, 31.4%, 34.2%, 30.4% and 30% for teflon, delrin, LDPE, polystyrene and acrylic insert, respectively. An appreciable difference in MTF curves across scanners/acquisition protocols was revealed, with a coefficient of variation of f_50%/f_10% of MTF curves across scanners/acquisition protocols of 10.1%/7.4%. A relevant difference in LCD performance of different scanners/acquisition protocols was found. The range of contrast threshold for a typical object size of 3 mm was 3.7–5.8 HU. Moreover, appreciable differences in terms of NUI values (range: 4.1%-8.3%) were found. The analysis of several quality indices showed a non-negligible variability in head CT imaging capabilities across different scanners/acquisition protocols. This highlights the importance of a physical in-depth characterization of image quality for each CT scanner as clinically used, in order to optimize CT imaging procedures.

Pediatric Computed Tomography Dose Optimization Strategies: A Literature Review

INTRODUCTION

Computed tomography (CT) dose optimization is an important issue in radiography because CT is the largest contributor to medical radiation dose and its use is increasing. However, CT dose optimization for pediatric patients could be more challenging than their adult counterparts. The purpose of this literature review was to identify and discuss the current pediatric CT dose saving techniques. Optimized pediatric protocols were also proposed.

METHODS

A comprehensive literature search was conducted using the Medline, ProQuest Health and Medical Complete, PubMed, ScienceDirect, Scopus, Springer Link, and Web of Science databases and the keywords CT, pediatric, optimization, protocol, and radiation dose to identify articles focusing on pediatric CT dose optimization strategies published between 2004 and 2014.

RESULTS AND SUMMARY

Seventy-seven articles were identified in the literature search. Strategies for optimizing a range of scan parameters and technical considerations including tube voltage and current, iterative reconstruction, diagnostic reference levels, bowtie filters, scout view, pitch, scan collimation and time, overscanning, and overbeaming for pediatric patients with different ages and body sizes and compositions were discussed. An example of optimized pediatric protocols specific to age and body size for the 64-slice CT scanners was devised. It is expected that this example could provide medical radiation technologists, radiologists, and medical physicists with ideas to optimize their pediatric protocols.