Improved bioresorbable microporous intravascular stents for gene therapy

Polymeric Biodegradable Stent Insertion in the Esophagus

Esophageal stent insertion has been used as a well-accepted and effective alternative to manage and improve the quality of life for patients diagnosed with esophageal diseases and disorders. Current stents are either permanent or temporary and are fabricated from either metal or plastic. The partially covered self-expanding metal stent (SEMS) has a firm anchoring effect and prevent stent migration, however, the hyperplastic tissue reaction cause stent restenosis and make it difficult to remove. A fully covered SEMS and self-expanding plastic stent (SEPS) reduced reactive hyperplasia but has a high migration rate. The main advantage that polymeric biodegradable stents (BDSs) have over metal or plastic stents is that removal is not require and reduce the need for repeated stent insertion. But the slightly lower radial force of BDS may be its main shortcoming and a post-implant problem. Thus, strengthening support of BDS is a content of the research in the future. BDSs are often temporarily effective in esophageal stricture to relieve dysphagia. In the future, it can be expect that biodegradable drug-eluting stents (DES) will be available to treat benign esophageal stricture, perforations or leaks with additional use as palliative modalities for treating malignant esophageal stricture, as the bridge to surgery or to maintain luminal patency during neoadjuvant chemoradiation.

Surface modification of metallic cardiovascular stents by strongly adhering aliphatic polyester coatings

This article reports on a novel two-step strategy for the coating of cardiovascular stents by strongly adhering biocompatible and biodegradable aliphatic polyesters. First, a precoating of poly(ethylacrylate) (PEA) was electrografted onto the metallic substrate by cathodic reduction of the parent monomer in dimethylformamide (DMF). The electrodeposition of PEA, in a good solvent of it, was confirmed by both Infra-red and Raman spectroscopies. The pendant ester groups of PEA were then chemically reduced into aluminum alkoxides, able to initiate the ring-opening polymerization (ROP) of either D,L-lactide (LA) or epsilon-caprolactone (CL). Growth of biodegradable PLA or PCL coatings from the adhering precoating was confirmed by both Infra-red and Raman spectroscopies, and directly observed by scanning electron microscopy (SEM). This type of coating can act as an anchoring layer for the subsequent casting of drug-loaded polyester films allowing the controlled release of antiproliferative agents for the treatment of in-stent restenosis.

Endovascular restorative neurosurgery: a novel concept for molecular and cellular therapy of the nervous system

The amalgam of molecular biology and neurosurgery offers immense promise for neurorestoration and the management of neurodegenerative deficiencies, developmental disorders, neoplasms, stroke, and trauma. This article summarizes present strategies for and impediments to gene therapy and stem cell therapy of the central nervous system and advances the concept of a potential new approach, namely endovascular restorative neurosurgery. The objectives of gene transfer to the central nervous system are efficient transfection of host cells, selective sustained expression of the transgene, and lack of toxicity or immune excitation. The requisite elements of this process are the identification of candidate diseases, the construction of vehicles for gene transfer, regulated expression, and physical delivery. In the selection of target disorders, the underlying genetic events to be overcome, as well as their spatial and temporal distributions, must be considered. These factors determine the requirements for the physical dispersal of the transgene, the duration of transgene expression, and the quantity of transgene product needed to abrogate the disease phenotype. Vehicles for conveying the transgene to the central nervous system include viral vectors (retroviruses, lentiviruses, adenoviruses, adeno-associated viruses, and herpes simplex virus), liposomes, and genetically engineered cells, including neural stem cells. Delivery of the transgene into the brain presents several challenges, including limited and potentially risky access through the cranium, sensitivity to volumetric changes, restricted diffusion, and the blood-brain barrier. Genetic or cellular therapeutic agents may be injected directly into the brain parenchyma (via stereotaxy or craniotomy), into the cerebrospinal fluid (in the ventricles or cisterns), or into the bloodstream (intravenously or intra-arterially). The advantages of the endovascular route include the potential for widespread distribution, the ability to deliver large volumes, limited perturbation of neural tissue, and the feasibility of repeated administration.

Biodegradable Polyglycolide Endovascular Coils Promote Wall Thickening and Drug Delivery in a Rat Aneurysm Model

OBJECTIVE

We designed biodegradable polyglycolide coils (BPCs) and compared the histopathological response to the coils with that to platinum Guglielmi detachable coils (GDCs), after insertion into ligated common carotid arteries (CCAs) of adult rats. BPCs were also tested for use in local drug delivery.

METHODS

Segments (4-mm) of unmodified BPCs, unmodified GDCs, or BPCs coated with Type I bovine collagen and recombinant human vascular endothelial growth factor-165 (500 μg/ml) were inserted into ligated CCAs of adult rats for 14 days, and specimens were compared with contralateral CCA control specimens.

RESULTS

Arterial segments with BPCs exhibited substantially increased wall thickening, compared with GDCs (0.33 mm versus 0.10 mm, P < 0.005), which reduced the luminal diameter by 40%, relative to untreated contralateral control specimens (P < 0.05, n = 6). Arterial segments with BPCs also exhibited a marked reduction (P < 0.05, n = 6) in luminal area (0.72 ± 0.93 mm2), with marked cellular proliferation within the coil diameter, indicating coil integration. Arterial segments with collagen/recombinant human vascular endothelial growth factor-coated BPCs also exhibited a marked 2.9-fold increase (P < 0.005, n = 5) in wall thickness (0.29 ± 0.11 mm) and a 34% reduction in luminal diameter, compared with contralateral control vessels. There was marked proliferation of cells within the coil lumen of vessels treated with BPCs with collagen/recombinant human vascular endothelial growth factor.

CONCLUSION

In this feasibility study, BPCs enhanced the vascular response of CCA segments, compared with GDCs, and were also suitable for local protein delivery to the vessel lumen, under conditions of stasis and arterial pressurization of vascular cells.

Topic review: surface modifications enhancing biological activity of guglielmi detachable coils in treating intracranial aneurysms

BACKGROUND

Endovascular therapy with Guglielmi detachable coils is an accepted treatment option for patients with intracranial aneurysms. However, an emerging technology in the realm of endovascular tools is the use of traditional Guglielmi detachable coils with biologically active substances complexed to the coil surface to enhance aneurysm occlusion.

METHODS

We review the literature and current trends in modified Guglielmi detachable coils. Surface modifications with extracellular matrix proteins, growth factors, ion impregnation, and genetically altered cells have been used in animal studies to improve the cellular response of Guglielmi detachable coils. Similarly, coronary artery stents have been modified in several different ways to maintain vessel patency, contrary to the goal of endovascular therapy. We comparatively reviewed this literature to add insight into the evolution of the research on modified Guglielmi detachable coils.

CONCLUSIONS

Guglielmi detachable coil modifications have the potential to enhance aneurysm obliteration with directed cellular responses. This may allow aneurysm occlusion with coils in less time than untreated coils, thus decreasing the risks of aneurysm enlargement and hemorrhage.

Materials and biomaterials for interventional radiology

Devices used in interventional radiology have significantly developed in the past few years. In order to understand the trends of this development, we analyzed how new interventional devices are progressively incorporating materials having original physical properties, and how developers are today progressively turning towards biomaterials, with respect to the new regulatory environment, and the requirements of biocompatibility.

Biocompatibility aspects of new stent technology

Stent implantation represents a major step forward since the introduction of coronary angioplasty. As indications continue to expand, better understanding of the early and late biocompatibility issues appears critical. Persisting challenges to the use of intracoronary stents include the prevention of early thrombus formation and late neointima development. Different metals and designs have been evaluated in animal models and subsequently in patients. Polymer coatings have been proposed to improve the biocompatibility of metallic stents or to serve as matrix for drug delivery and they are currently undergoing clinical studies. The promises of a biodegradable stent have not yet been fulfilled although encouraging results have recently been reported. Continuous low dose-rate brachytherapy combining the scaffolding effect of the stent with localized radiation therapy has witnessed the development and early clinical testing of radioactive stents. The combined efforts of basic scientists and clinicians will undoubtedly contribute to the improvement of stent biocompatibility in the future.