In Vitro Evaluation of Horizontal Implant Micromovement in Bone Specimen With Contact Endoscopy

Evaluation of the effect of self-cutting and nonself-cutting thread designed implant with different thread depth on variable insertion torques: An histomorphometric analysis in rabbits

PURPOSE

To evaluate of the effect of self-cutting and nonself-cutting thread designed implant with different thread depth on variable insertion torques. To evaluate the bone volume (BV) and bone to implant contact (BIC) in these variables MATERIALS AND METHODS: Mainly two thread design, V-shaped thread which is self-cutting and power thread design, which is nonself-cutting implants were considered for this study with a variation in thread depth of 0.4 and 0.6 mm for both the designs, respectively. A total of 32 CAD designed machined surface implant prototypes were manufactured of 4 mm in diameter and 8 mm in length were made, which were machined surfaced, which was placed in the femur of 16 New Zealand white rabbits. These were categorized under 2 groups; Group 1 and Group 2 with insertion torques of <30 and >50 Ncm, respectively. After 4 weeks of healing, rabbits were sacrificed and histomophometric and histologic analyses were done to evaluate the bone response.

RESULTS

Significantly, more BIC was recorded for high torque implants compared with low torque in power-shaped thread design (P value = .01*). BV for new bone formation was statistically significant for V-shaped thread design in high torque when compared with low torque (P value = .02*).

CONCLUSION

The effect of the depth of the thread design was significant for the power-shaped design in enhancing BIC when compared with V-shaped thread design. With high torque V-shaped thread design had more new bone formation as compared with power-shaped thread design.

Increasing the Stability of Dental Implants: the Concept of Osseodensification

One of the most important factors that affect osseointegration is the primary stability of the implant. Dental implants inserted at the posterior region of the maxilla exhibit the lowest success rates as the low density bone in this area often jeopardize rigid fixation of the implant. Many surgical techniques have been developed to increase the primary stability of an implant placed in low density bone, such as bicortical fixation of the implant, undersized preparation of the implant bed and bone condensation by the use of osteotomes. A new promising technique, named osseodensification, has been recently developed that creates an autograft layer of condensed bone at the periphery of the implant bed by the aid of specially designed burs rotating in a clockwise and anti-clockwise direction. The purpose of this review is to emphasize that implant primary stability is strongly influenced by the surgical technique, to quote and briefly analyse the various surgical procedures laying weight to osseodensification procedure.

In-vitro development of a temporal abutment screw to protect osseointegration in immediate loaded implants

PURPOSE

In this study, a temporal abutment fixation screw, designed to fracture in a controlled way upon application of an occlusal force sufficient to produce critical micromotion was developed. The purpose of the screw was to protect the osseointegration of immediate loaded single implants.

MATERIALS AND METHODS

Seven different screw prototypes were examined by fixing titanium abutments to 112 Mozo-Grau external hexagon implants (MG Osseous®; Mozo-Grau, S.A., Valladolid, Spain). Fracture strength was tested at 30° in two subgroups per screw: one under dynamic loading and the other without prior dynamic loading. Dynamic loading was performed in a single-axis chewing simulator using 150,000 load cycles at 50 N. After normal distribution of obtained data was verified by Kolmogorov-Smirnov test, fracture resistance between samples submitted and not submitted to dynamic loading was compared by the use of Student's t-test. Comparison of fracture resistance among different screw designs was performed by the use of one-way analysis of variance. Confidence interval was set at 95%.

RESULTS

Fractures occurred in all screws, allowing easy retrieval. Screw Prototypes 2, 5 and 6 failed during dynamic loading and exhibited statistically significant differences from the other prototypes.

CONCLUSION

Prototypes 2, 5 and 6 may offer a useful protective mechanism during occlusal overload in immediate loaded implants.

A Four-Year Survival Rate Multicenter Prospective Clinical Study on 377 Implants: Correlations Between Implant Insertion Torque, Diameter, and Bone Quality

The purpose of this study was to evaluate the survival rate and incidence of prosthetic complications in 377 implants with a double octagon connection. Furthermore, the correlations among implant dimensions (diameter and length), bone quality, and insertion torque were investigated. A 4-year multicenter prospective clinical study was designed to evaluate the survival rate of 377 dental implants inserted in 189 patients between January 2004 and April 2010. After an average follow-up of 46 months, the implant survival rate was 99.7%, and the incidence of complication was 0.53%. Moreover, insertion torque was statistically related in a significant way to implant diameter. The connection system seemed to reduce the risk that the prosthetic component screw would loosen. Within the limits of this study, it was observed that a wider diameter corresponded to a higher implant primary stability. Implant length did not seem to be critical in obtaining higher primary stability.

Effect of Model Parameters on Finite Element Analysis of Micromotions in Implant Dentistry

Micromotion between dental implant and bony socket may occur in immediate-loading scenarios. Excessive micromotion surpassing an estimated threshold of approximately 150 μm may result in fibrous encapsulation instead of osseointegration of the implant. As finite element analysis (FEA) has been applied in this field, it was the aim of this study to evaluate the effect of implant-related variables and modeling parameters on simulating micromotion phenomena. Three-dimensional FEA models representing a dental implant within a bony socket were constructed and used for evaluating micromotion (global displacement) and stress transfer (von Mises equivalent stress) at the implant-bone interface when static loads were applied. A parametric study was conducted altering implant geometry (cylinder, screw), direction of loading (axial, horizontal), healing status (immediate implant, osseointegrated implant), and contact type between implant and bone (friction free, friction, rigid). Adding threads to a cylindrically shaped implant as well as changing the contact type between implant and bone from friction free to rigid led to a reduction of implant displacement. On the other hand, reducing the elastic modulus of bone for simulating an immediate implant caused a substantial increase in displacement of the implant. Altering the direction of loading from axial to horizontal caused a change in loading patterns from uniform loading surrounding the whole implant to localized loading in the cervical area. Implant-related and bone-related factors determine the degree of micromotion of a dental implant during the healing phase, which should be considered when choosing a loading protocol.

Biofilm and dental implant: The microbial link

Mouth provides a congenial environment for the growth of the microorganisms as compared to any other part of the human body by exhibiting an ideal nonshedding surface. Dental plaque happens to be a diverse community of the microorganisms found on the tooth surface. Periodontal disease and the peri-implant disease are specific infections that are originating from these resident microbial species when the balance between the host and the microbial pathogenicity gets disrupted. This review discusses the biofilms in relation to the peri-implant region, factors affecting its presence, and the associated treatment to manage this complex microbial colony. Search Methodology: Electronic search of the medline was done with the search words: Implants and biofilms/dental biofilm formation/microbiology at implant abutment interface/surface free energy/roughness and implant, periimplantitis/local drug delivery and dental implant. Hand search across the journals - clinical oral implant research, implant dentistry, journal of dental research, international journal of oral implantology, journal of prosthetic dentistry, perioodntology 2000, journal of periodontology were performed. The articles included in the review comprised of in vivo studies, in vivo (animal and human) studies, abstracts, review articles.

Micromotion of Dental Implants: Basic Mechanical Considerations

Micromotion of dental implants may interfere with the process of osseointegration. Using three different types of virtual biomechanical models, varying contact types between implant and bone were simulated, and implant deformation, bone deformation, and stress at the implant-bone interface were recorded under an axial load of 200 N, which reflects a common biting force. Without friction between implant and bone, a symmetric loading situation of the bone with maximum loading and displacement at the apex of the implant was recorded. The addition of threads led to a decrease in loading and displacement at the apical part, but loading and displacement were also observed at the vertical walls of the implants. Introducing friction between implant and bone decreased global displacement. In a force fit situation, load transfer predominantly occurred in the cervical area of the implant. For freshly inserted implants, micromotion was constant along the vertical walls of the implant, whereas, for osseointegrated implants, the distribution of micromotion depended on the location. In the cervical aspect some minor micromotion in the range of 0.75 μm could be found, while at the most apical part almost no relative displacement between implant and bone occurred.

Displacement of dental implants in trabecular bone under a static lateral load in fresh bovine bone

AIM

The study aims to provide objective data for the displacement of titanium screw implants in trabecular bone specimens. One hundred Semados implants (Bego, Bremen, Germany) were inserted in bovine type IV bone specimens. All implants had a diameter of 3.75 mm; 50 implants had a length of 8.5 mm and 50 implants had a length of 15 mm. Insertion torque was determined at intervals of 10, 20, and 30 Ncm. Implants were loaded horizontally with 10, 20, and 30 N for 2 seconds. An indicator strip was attached to the implant abutment to allow direct observation of implant movement relative to the bone surface. Horizontal displacement was assessed with an accuracy of measurement of 10 µm. Seven implants got lost by visible loosening. Degree of displacement was subject to evaluation with all others. Those implants showed a mean displacement of 59 µm for 10 N (n = 100), 173 µm for 20 N (n = 99), and 211 µm for 30 N (n = 93). The mean displacement of 15-mm implants (16, 37, 51 µm) was significantly lower compared with 8.5-mm implants (103, 311, 396 µm) corresponding to 10, 20, and 30 N as lateral loads.

CONCLUSIONS

Displacement of screw implants in trabecular bone can be detected and visualized using commercially available endoscopes with a high magnification. A lateral load of 20 N indicates a mean displacement of over 100 µm and therefore results in a critical displacement.

Influence of surgical technique, implant shape and diameter on the primary stability in cancellous bone

Achievement of primary stability during surgical placement of dental implants is one of the most important factors for successful osseointegration depending on various anatomical, surgical and implant-related factors. Resonance frequency analysis (RFA) has been shown as a non-invasive and objective technique for measuring the stability of implants. The aim of this study was to evaluate the effect of some surgical and implant-related factors in enhancing primary stability and to estimate a correlation between RFA and insertion torque (IT) in proximal regions of cow ribs representing cancellous bone. Fifteen implant beds were prepared in the most proximal region of six fresh cow ribs. Ninety implants with three different shapes and two different diameters were placed with two different surgical techniques, and the primary stability was compared using RFA and IT. Significantly higher RFA and IT values were achieved when under-dimensioned drilling was used as the surgical method (P<0·01); significantly higher IT values were obtained with the use of wider implants (P<0·01) and partially conical Astra Tech implants showed the highest IT values (P<0·01). When all the implants were considered, significant correlations between the IT and RFA values were noted (%40·6, P<0·05). Partially conical implants with a wide diameter to be placed with the modified surgical technique proposed appear to be useful in enhancing the primary stability in cancellous bone.

Implant micromotion is related to peak insertion torque and bone density

OBJECTIVES

Measuring peak insertion torque in relation to different bone densities, the present study seeks to determine whether micromotion at the interface is related to primary stability achieved by increasing insertion torque.

MATERIAL AND METHODS

A total of 120 Ti-Bone implants were placed in fresh bovine bone samples representing three density categories: hard, normal and soft (HNS). Five groups of peak insertion torque (20, 35, 45, 70 and 100 N/cm) were evaluated in the three bone density categories noted. Customized electronic equipment connected to a PC was used to register the peak and other insertion torque data. A loading device, consisting of a digital force gauge and a digital micrometer, was used to measure the micromovements of the implant during the application of 20, 25 and 30 N lateral forces. The data were analyzed for statistical significance by ANOVA and Spearman's rank correlation coefficient tests.

RESULTS

A statistically significant difference between implant micromobility placed with different levels of torque and in different bone densities was demonstrated by ANOVA. Spearman's rank correlation coefficient showed a high dependency between the peak insertion torque and the observed micromovement. Particularly, in soft bone, it was not possible to achieve more than 35 N/cm of peak insertion torque.

CONCLUSIONS

Results showed that increasing the peak insertion torque reduces the level of implant micromotion. In addition, micromotion in soft bone was found to be consistently high, which could lead to the failure of osseointegration. Thus, immediate functional loading of implants in soft bone should be considered with caution.