Newly developed ventricular assist device with linear oscillatory actuator

Development of a miniature motor-driven pulsatile LVAD driven by a fuzzy controller

We have been developing a small, lightweight motor-driven pulsatile left ventricular assist device (LVAD) with a ball screw. The motor-driven LVAD consists of a brushless DC motor and a ball screw. The attractive magnetic force between Nd-Fe-B magnets (with a diameter of 5 mm and a thickness of 1.5 mm) mounted in holes in a silicone rubber sheet (thickness 2 mm) and an iron plate adhered onto the a diaphragm of the blood pump can provide optimum active blood filling during the pump filling phase. The LVAD has a stroke volume of 55 ml and an overall volume of 285 ml; it weighs 360 g. The controller mainly consists of a fuzzy logic position and velocity controller to apply doctors' and engineers' knowledge to control the LVAD. Each unit of the controller consists of a functionally independent program module for easy improvement of the controller's performance. The LVAD was evaluated in in vitro experiments using a mock circulation. A maximum pump outflow of 5.1 l/min was obtained at a drive rate of 95 bpm against an afterload of 95 mmHg, and active filling using the attractive magnetic force provided a pump output of 3.6 l/min at a drive rate of 75 bpm under a preload of 0 mmHg. The operating efficiency of the LVAD was measured at between 8% and 10.5%. While the LVAD can provide adequate pump outflow for cardiac assistance, further upgrading of the software and improvement of the blood pump are required to improve pump performance and efficiency.

Pulsatile blood pump with a linear drive actuator

The main purpose of this study was to develop an implantable direct-electromagnetic left ventricular assist system driven by a linear actuator (linear LVAS). The linear LVAS is a pulsatile pump with a pusher plate that is driven directly by a linear oscillatory actuator (LOA) without any movement converters. This prototype pump unit with a LOA was 100 mm in diameter, 50 mm in thickness, and weighed 740 g. The full-fill/full-eject driving method was applied to the control algorithm. In addition, a mechanism to detect and release sucking was realized to overcome this problem that accompanies the active-filling type of VAS. The performance of the linear LVAS was evaluated in a long-term animal experiment using a goat (56 kg). The goat survived for 42 days. The reason why we terminated this experiment was that thrombus was found in the pump. There was no frictional debris found around the LOA. The linear LVAS did not exhibit electrical or mechanical problems during the first animal experiment.

The Japanese Artificial Organs Scene: Current Status

Artificial organs and regenerative medicine are the subjects of very active research and development (R&D) in Japan and various artificial organs are widely used in patients. Results of the R&D are presented at the annual conference of the Japanese Society for Artificial Organs (JSAO). Progress in the fields of artificial organs and regenerative medicine are reviewed annually in the Japanese Journal of Artificial Organs. The official English-language journal of JSAO, Journal of Artificial Organs, also publishes many original articles by Japanese researchers. Although the annual conference and the publications of JSAO provide the world with update information on artificial organs and regenerative medicine in Japan, the information is not always understood appropriately in the rest of the world, mainly due to language problems. This article therefore introduces the current status of artificial organs and regenerative medicine in Japan. Artificial hearts and metabolic support systems are reviewed here and other interesting areas such as regenerative medicine can be found elsewhere.