1
|
Yazdanpanah-Ardakani K, Niroomand-Oscuii H, Sahebi-Kuzeh Kanan R, Shokri N. Optimization of a centrifugal blood pump designed using an industrial method through experimental and numerical study. Sci Rep 2024; 14:7443. [PMID: 38548818 DOI: 10.1038/s41598-024-57019-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2023] [Accepted: 03/13/2024] [Indexed: 04/02/2024] Open
Abstract
With improved treatment of coronary artery disease, more patients are surviving until heart failure occurs. This leads to an increase in patients needing devices for struggling with heart failure. Ventricular assist devices are known as the mainstay of these devices. This study aimed to design a centrifugal pump as a ventricular assist device. In order to design the pump, firstly, the geometrical parameters of the pump, including the gap distance, blade height, and position of the outlet relative to the blade, were investigated. Finally, the selected configuration, which had all the appropriate characteristics, both hydraulically and physiologically, was used for the rest of the study. The study of the blade, as the main component in energy transfer to the blood, in a centrifugal pump, has been considered in the present study. In this regard, the point-to-point design method, which is used in industrial applications, was implemented. The designer chooses the relationship between the blade angles at each radius in the point-to-point method. The present study selected logarithmic and second-order relations for designing the blade's profile. In total, 58 blades were examined in this study, which differed regarding blade inlet and outlet angles and the relationship between angle and radial position. ANSYS CFX 17.0 software was utilized to simulate blades' performances, and a benchmark pump provided by the US Food and Drug Administration (FDA) was used to validate the numerical simulations. Then, the selected impeller from the numerical investigation was manufactured, and its performance was compared experimentally with the FDA benchmark pump. A hydraulic test rig was also developed for experimental studies. The results showed that among the blades designed in this study, the blade with an input angle of 45° and an output angle of 55°, which is designed to implement a logarithmic relationship, has the best performance. The selected impeller configuration can increase the total head (at least by 20%) at different flow rates compared to the FDA pump.
Collapse
Affiliation(s)
| | | | | | - Nasim Shokri
- Department of Biomedical Engineering, Sahand University of Technology, Tabriz, Iran
| |
Collapse
|
2
|
Hirschhorn M, Catucci N, Day SW, Stevens RM, Tchantchaleishvili V, Throckmorton AL. Channel impeller design for centrifugal blood pump in hybrid pediatric total artificial heart: Modeling, magnet integration, and hydraulic experiments. Artif Organs 2022; 47:680-694. [PMID: 36524792 DOI: 10.1111/aor.14480] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2022] [Revised: 10/10/2022] [Accepted: 12/05/2022] [Indexed: 12/23/2022]
Abstract
BACKGROUND The purpose of this research is to address ongoing device shortfalls for pediatric patients by developing a novel pediatric hybrid total artificial heart (TAH). The valveless magnetically-levitated MCS device (Dragon Heart) has only two moving parts, integrates an axial and centrifugal blood pump into a single device, and will occupy a compact footprint within the chest for the pediatric patient population. METHODS Prior work on the Dragon Heart focused on the development of pump designs to achieve hemodynamic requirements. The impeller of these pumps was shaft-driven and thus could not be integrated for testing. The presented research leverages an existing magnetically levitated axial flow pump and focuses on centrifugal pump development. Using the axial pump diameter as a geometric constraint, a shaftless, magnetically supported centrifugal pump was designed for placement circumferentially around the axial pump domain. The new design process included the computational analysis of more than 50 potential centrifugal impeller geometries. The resulting centrifugal pump designs were prototyped and tested for levitation and no-load rotation, followed by in vitro testing using a blood analog. To meet physiologic demands, target performance goals were pressure rises exceeding 90 mm Hg for flow rates of 1-5 L/min with operating speeds of less than 5000 RPM. RESULTS Three puck-shaped, channel impellers for the centrifugal blood pump were selected based on achieving performance and space requirements for magnetic integration. A quasi-steady flow analysis revealed that the impeller rotational position led to a pulsatile component in the pressure generation. After prototyping, the centrifugal prototypes (3, 4, and 5 channeled designs) demonstrated levitation and no-load rotation. Hydraulic experiments established pressure generation capabilities beyond target requirements. The pressure-flow performance of the prototypes followed expected trends with a dependence on rotational speed. Pulsatile blood flow was observed without pump-speed modulation due to rotating channel passage frequency. CONCLUSION The results are promising in the advancement of this pediatric TAH. The channeled impeller design creates pressure-flow curves that are decoupled from the flow rate, a benefit that could reduce the required controller inputs and improve treatment of hypertensive patients.
Collapse
Affiliation(s)
- Matthew Hirschhorn
- BioCirc Research Laboratory, School of Biomedical Engineering, Science, and Health Systems, Drexel University, Philadelphia, Pennsylvania, USA
| | - Nicholas Catucci
- Drexel Machine Shop, Office of Research and Innovation, Drexel University, Philadelphia, Pennsylvania, USA
| | - Steven W Day
- Department of Biomedical Engineering, Kate Gleason College of Engineering, Rochester Institute of Technology, Rochester, New York, USA
| | - Randy M Stevens
- Pediatrics, College of Medicine, St. Christopher's Hospital for Children, Drexel University, Philadelphia, Pennsylvania, USA
| | - Vakhtang Tchantchaleishvili
- Division of Cardiac Surgery, Department of Surgery, Thomas Jefferson University Hospital, Philadelphia, Pennsylvania, USA
| | - Amy L Throckmorton
- BioCirc Research Laboratory, School of Biomedical Engineering, Science, and Health Systems, Drexel University, Philadelphia, Pennsylvania, USA
| |
Collapse
|
3
|
Ray PK, Das AK, Das PK. Numerical assessment of hemodynamic perspectives of a left ventricular assist device and subsequent proposal for improvisation. Comput Biol Med 2022; 151:106309. [PMID: 36410098 DOI: 10.1016/j.compbiomed.2022.106309] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2022] [Revised: 10/16/2022] [Accepted: 11/13/2022] [Indexed: 11/18/2022]
Abstract
Due to the unavailability of donors, the use of left ventricular assist devices has emerged to be a reliable line of alternative treatment for heart failure. However, ventricular assist devices (VAD) have been associated with several postoperative complications such as thrombosis, hemolysis, etc. Despite considerable improvements in technology, blood trauma due to high shear stress generation has been a major concern that is largely related to the geometrical feature of the VAD. This study aims to establish the design process of a centrifugal pump by considering several variations in the geometrical feature of a base design using the commercial solver ANSYS-CFX. To capture the uncertain behavior of blood as fluid, Newtonian, as well as non-Newtonian (Bird-Carreau model), models are used for flow field prediction. To assess the possibility of blood damage maximum wall shear stress and hemolysis index have been estimated for each operating point. The results of the simulations yield an optimized design of the pump based on parameters like pressure head generation, maximum shear stress, hydraulic efficiency, and hemolysis index. Further, the design methodology and the steps of development discussed in the paper can serve as a guideline for developing small centrifugal pumps handling blood.
Collapse
Affiliation(s)
- Pulak Kumar Ray
- Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India.
| | - Arup Kumar Das
- Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee, India
| | - Prasanta Kumar Das
- Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India.
| |
Collapse
|
4
|
Krisher JA, Malinauskas RA, Day SW. The Effect of Blood Viscosity on Shear-Induced Hemolysis using a Magnetically Levitated Shearing Device. Artif Organs 2022; 46:1027-1039. [PMID: 35030287 DOI: 10.1111/aor.14172] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2021] [Revised: 11/17/2021] [Accepted: 12/30/2021] [Indexed: 11/30/2022]
Abstract
INTRODUCTION Blood contacting medical devices, including rotary blood pumps, can cause shear-induced blood damage that may lead to adverse effects in patients. Due in part to an inadequate understanding of how cell-scale fluid mechanics impact red blood cell membrane deformation and damage, there is currently not a uniformly accepted engineering model for predicting blood damage caused by complex flow fields within ventricular assist devices (VADs). METHODS We empirically investigated hemolysis in a magnetically levitated axial Couette flow device typical of a rotary VAD. The device is able to accurately control the shear rate and exposure time experienced by blood and to minimize the effects of other uncharacterized stresses. Using this device, we explored the effects of both hematocrit and plasma viscosity on shear-induced hemolysis to characterize blood damage based on the viscosity-independent shear rate, rather than on shear stress. RESULTS Over a shear rate range of 20,000-80,000 1/s, the Index of Hemolysis (IH) was found to be dependent upon and well-predicted by shear rate alone. IH was independent of hematocrit, bulk viscosity, or the suspension media viscosity, and less correlated to shear stress (MSE=0.46-0.75) than to shear rate (MSE=0.06-0.09). CONCLUSION This study recommends that future investigations of shear-induced blood damage report findings with respect to the viscosity-neutral term of shear rate, in addition to the bulk whole blood viscosity measured at an appropriate shear rate relevant to the flow conditions of the device.
Collapse
Affiliation(s)
- James A Krisher
- Kate Gleason College of Engineering, Rochester Institute of Technology
| | | | - Steven W Day
- Kate Gleason College of Engineering, Rochester Institute of Technology
| |
Collapse
|
5
|
Stochastic simulation of the FDA centrifugal blood pump benchmark. Biomech Model Mechanobiol 2021; 20:1871-1887. [PMID: 34191187 DOI: 10.1007/s10237-021-01482-0] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/26/2020] [Accepted: 06/17/2021] [Indexed: 10/21/2022]
Abstract
In the present study, the effect of physical and operational uncertainties on the hydrodynamic and hemocompatibility characteristics of a centrifugal blood pump designed by the U.S. food and drug administration is investigated. Physical uncertainties include the randomness in the blood density and viscosity, while the operational uncertainties are composed of the pump rotational speed, mass flow rate, and turbulence intensity. The non-intrusive polynomial chaos expansion has been employed to conduct the uncertainty quantification analysis. Additionally, to assess each stochastic parameter's influence on the quantities of interest, the sensitivity analysis is utilized through the Sobol' indices. For numerical simulation of the pump's blood flow, the SST [Formula: see text] turbulence model and a power-law model of hemolysis were employed. The pump's velocity field is profoundly affected by the rotational speed in the bladed regions and the mass flow rate in other zones. Furthermore, the hemolysis index is dominantly sensitive to blood viscosity. According to the results, pump hydraulic characteristics (i.e., head and efficiency) show a more robust behavior than the hemocompatibility characteristics (i.e., hemolysis index) regarding the operational and physical uncertainties. Finally, it was found that the probability distribution function of the hemolysis index covers the experimental measurements.
Collapse
|
6
|
YAZDANPANH-ARDAKANI KOHYAR, NIROOMAND-OSCUII HANIEH. COMPUTATIONAL STUDY ON THE PERFORMANCE OF A CENTRIFUGAL LVAD WITH THE IMPELLER DESIGNED BY INDUSTRIAL METHOD: PROPOSING SIMPLE-TO-MANUFACTURE LVAD’S IMPELLERS. J MECH MED BIOL 2021. [DOI: 10.1142/s0219519421500111] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
Although the demand of donor hearts for patients with end-stage heart failure is growing, its supply has remained constant. Ventricular assist devices (VADs) provide a chance of finding donor heart by increasing waiting period. In this study, the main goal is to employ an industrial method (point-by-point method) for designing blades profile with a simplified geometry which can be produced by conventional manufacturing methods. In this study, a centrifugal continuous-flow rotary pump is designed and the effects of components’ different geometries on the left ventricular assist devices (LVADs) function are investigated. Moreover, both hydraulic performance and blood damages (hemolysis index (HI)) caused by the pump are considered as design criteria. ANSYS CFX 17 is used to analyze the performance of the designed LVAD. Additionally, the geometry of components are investigated based on fulfilling the required performance of the LVAD while reducing the blood damage level. Comparing the designed VAD with the commercial ones shows that the designed blade further improves the performance of the centrifugal LVAD. Therefore, designing the impeller’s blade profile with point-by-point method seems to be promising. Simplicity in manufacturing is considered to be a big advantage for a design which also leads to lower manufacturing costs. This study demonstrates how industrial design methods can be employed to design simple-to-manufacture impellers which are suitable for LVADs.
Collapse
|
7
|
Abstract
Introduction Neutrophils display an array of behaviors ranging from rolling and migration to phagocytosis and granule secretion. Several of these behaviors are modulated by the local shear conditions. In the normal circulation, neutrophils experience shear rates from approximately 10-2,000 s-1. However, neutrophils are also exposed to pathological shear levels in natural conditions such as severe stenosis and arteriosclerosis, as well as in blood-contacting devices such as ventricular assist devices (VADs) and hemodialysis machines. The effects of transiently (< 1 sec) exposing neutrophils to abnormally high shear rates (>3,000 s-1) are not well understood. Methods We developed a set of microfluidic devices capable of exposing neutrophils to high shear rates for short durations (100-400 msec). Suspensions of isolated neutrophils were perfused through the devices and their rolling velocities on P-selectin were analyzed before and after shear exposure. Results We observed a significant increase in neutrophil rolling velocities on P-selectin coated regions following transient high shear exposure. The magnitude of the rolling velocity increase was dependent upon the duration of high shear exposure and became statistically significant for exposure times of 310 msec or longer. When polystyrene beads coated with a glycosulfopeptide that mimics the binding region of P-selectin glycoprotein ligand-1 (PSGL-1) were perfused through the devices, no change between the pre-shear and post-shear rolling velocities was observed. Conclusions These results suggest that high shear levels alter normal neutrophil rolling behavior and are important for understanding neutrophil biology in high shear conditions, as well as for improving medical device performance.
Collapse
|
8
|
Scardulla F, Agnese V, Romano G, Di Gesaro G, Sciacca S, Bellavia D, Clemenza F, Pilato M, Pasta S. Modeling Right Ventricle Failure After Continuous Flow Left Ventricular Assist Device: A Biventricular Finite-Element and Lumped-Parameter Analysis. Cardiovasc Eng Technol 2018; 9:427-437. [PMID: 29700783 DOI: 10.1007/s13239-018-0358-x] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/11/2017] [Accepted: 04/21/2018] [Indexed: 01/13/2023]
Abstract
The risk of right ventricle (RV) failure remains a major contraindication for continuous-flow left ventricular assist device (CF-LVAD) implantation in patients with heart failure. It is therefore critical to identify the patients who will benefit from early intervention to avoid adverse outcomes. We sought to advance the computational modeling description of the mechanisms underlying RV failure in LVAD-supported patients. RV failure was studied by computational modeling of hemodynamic and cardiac mechanics using lumped-parameter and biventricular finite element (FE) analysis. Findings were validated by comparison of bi-dimensional speckle-tracking echocardiographic strain assessment of the RV free wall vs. patient-specific computational strain estimations, and by non-invasive lumped-based hemodynamic predictions vs. invasive right heart catheterization data. Correlation analysis revealed that lumped-derived RV cardiac output (R = 0.94) and RV stroke work index (R = 0.85) were in good agreement with catheterization data collected from 7 patients with CF-LVAD. Biventricular FE analysis showed abnormal motion of the interventricular septum towards the left ventricular free wall, suggesting impaired right heart mechanics. Good agreement between computationally predicted and echocardiographic measured longitudinal strains was found at basal (- 19.1 ± 3.0% for ECHO, and - 16.4 ± 3.2% for FEM), apical (- 20.0 ± 3.7% for ECHO, and - 17.4 ± 2.7% for FEM), and mid-level of the RV free wall (- 20.1 ± 5.9% for echo, and - 18.0 ± 5.4% for FEM). Simulation approach here presented could serve as a tool for less invasive and early diagnosis of the severity of RV failure in patients with LVAD, although future studies are needed to validate our findings against clinical outcomes.
Collapse
Affiliation(s)
- Francesco Scardulla
- Dipartimento dell'Innovazione Industriale e Digitale (DIID), Universita' di Palermo, Viale delle Scienze, Palermo, Italy
| | - Valentina Agnese
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy
| | - Giuseppe Romano
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy
| | - Gabriele Di Gesaro
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy
| | - Sergio Sciacca
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy
| | - Diego Bellavia
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy
| | - Francesco Clemenza
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy
| | - Michele Pilato
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy
| | - Salvatore Pasta
- Department for the Treatment and Study of Cardiothoracic Diseases and Cardiothoracic Transplantation, IRCCS-ISMETT, Palermo, Italy. .,Fondazione Ri.MED, Palermo, Italy.
| |
Collapse
|
9
|
Telyshev D, Denisov M, Pugovkin A, Selishchev S, Nesterenko I. The Progress in the Novel Pediatric Rotary Blood Pump Sputnik Development. Artif Organs 2018; 42:432-443. [DOI: 10.1111/aor.13109] [Citation(s) in RCA: 26] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2017] [Revised: 11/23/2017] [Accepted: 12/12/2017] [Indexed: 01/29/2023]
Affiliation(s)
- Dmitry Telyshev
- National Research University of Electronic Technology, Biomedical Systems Department; Zelenograd, Moscow Russia
| | - Maxim Denisov
- National Research University of Electronic Technology, Biomedical Systems Department; Zelenograd, Moscow Russia
| | - Alexander Pugovkin
- National Research University of Electronic Technology, Biomedical Systems Department; Zelenograd, Moscow Russia
| | - Sergey Selishchev
- National Research University of Electronic Technology, Biomedical Systems Department; Zelenograd, Moscow Russia
| | - Igor Nesterenko
- National Research University of Electronic Technology, Biomedical Systems Department; Zelenograd, Moscow Russia
| |
Collapse
|
10
|
Abstract
Purpose Miniaturisation of VADs can offer important benefits, including less invasive implantation techniques and more versatility in patient selection. The aim of this work was to reduce the weight, size, and energy consumption of the Sputnik VAD. Methods The second generation of the Sputnik VAD was developed with a set of changes in construction. The head pressure-flow rate (H-Q) and power consumption-flow rate curves for the Sputnik VADs were measured at different rotational speeds. Computational fluid dynamics (CFD) were used for operating condition simulation and the LVADs were compared under the simulated physiological conditions. Results The slope of the H-Q curves for the Sputnik 1 VAD remains almost invariable over the entire range of the measured flow rate, in contrast to the curves for the Sputnik 2 VAD, which become flat in the high flow-rate region. Despite the design modification, the operating rotor speed remained invariable. The preload sensitivity of the Sputnik VAD is higher than that of the other rotary blood pumps and amounts to 0.111 ± 0.0092 L min−1 mmHg−1. The power consumption for the Sputnik 2 VAD is lower over the entire speed range, except for at 5,000 rpm. Conclusions The pump weight was reduced from 246 to 205 g, the pump length was decreased from 82 to 66 mm, and the pump diameter was decreased from 32 to 29 mm. The total energy consumption of the pump was reduced by 15%.
Collapse
|
11
|
Chopski SG, Fox CS, McKenna KL, Riddle ML, Kafagy DH, Stevens RM, Throckmorton AL. Physics-driven impeller designs for a novel intravascular blood pump for patients with congenital heart disease. Med Eng Phys 2016; 38:622-632. [DOI: 10.1016/j.medengphy.2016.03.010] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2015] [Revised: 02/25/2016] [Accepted: 03/28/2016] [Indexed: 01/30/2023]
|
12
|
Myagmar O, Day SW. The Evaluation of Blood Damage in a Left Ventricular Assist Device1. J Med Device 2015. [DOI: 10.1115/1.4030122] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022] Open
Affiliation(s)
- Oyungerel Myagmar
- Mechanical Engineering Department, Rochester Institute of Technology, Rochester, NY 14623
| | - Steven W. Day
- Mechanical Engineering Department, Rochester Institute of Technology, Rochester, NY 14623
| |
Collapse
|
13
|
Chen Z, Mondal NK, Ding J, Gao J, Griffith BP, Wu ZJ. Shear-induced platelet receptor shedding by non-physiological high shear stress with short exposure time: glycoprotein Ibα and glycoprotein VI. Thromb Res 2015; 135:692-8. [PMID: 25677981 DOI: 10.1016/j.thromres.2015.01.030] [Citation(s) in RCA: 42] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2014] [Revised: 01/01/2015] [Accepted: 01/30/2015] [Indexed: 11/17/2022]
Abstract
INTRODUCTION The structural integrity of platelet receptors is essential for platelets to function normally in hemostasis and thrombosis in response to physiological and pathological stimuli. The aim of this study was to examine the shedding of two key platelet receptors, glycoprotein (GP) Ibα and GPVI, after exposed to the non-physiological high shear stress environment which commonly exists in blood contacting medical devices and stenotic blood vessels. MATERIALS AND METHODS In this in vitro experiment, we exposed healthy donor blood in our specially designed blood shearing device to three high shear stress levels (150, 225, 300 Pa) in combination with two short exposure time conditions (0.05 and 0.5 sec.). The expression and shedding of platelet GPIbα and GPVI receptors in the sheared blood samples were characterized using flow cytometry. The ability of platelet aggregation induced by ristocetin and collagen related to GPIbα and GPVI in the sheared blood samples, respectively, was evaluated by aggregometry. RESULTS AND CONCLUSIONS Compared to the normal blood, the surface expression of platelet GPIbα and GPVI in the sheared blood significantly decreased with increasing shear stress and exposure time. Moreover, the platelet aggregation induced by ristocetin and collagen reduced remarkably in a similar fashion. In summary non-physiological high shear stresses with short exposure time can induce shedding of platelet GPIbα and GPVI receptors, which may lead platelet dysfunction and influence the coagulation system. This study may provide a mechanistic insight into the platelet dysfunction and associated bleeding complication in patients supported by certain blood contacting medical devices.
Collapse
Affiliation(s)
- Zengsheng Chen
- Artificial Organs Laboratory, Department of Surgery, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | - Nandan K Mondal
- Artificial Organs Laboratory, Department of Surgery, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | - Jun Ding
- Artificial Organs Laboratory, Department of Surgery, University of Maryland School of Medicine, Baltimore, MD 21201, USA; Department of Mechanical Engineering, University of Maryland, Baltimore County, Baltimore, MD 21250, USA
| | - Jingya Gao
- Department of Chemistry and Biochemistry, School of Science, Siena College, Loudonville, NY 12211, USA
| | - Bartley P Griffith
- Artificial Organs Laboratory, Department of Surgery, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | - Zhongjun J Wu
- Artificial Organs Laboratory, Department of Surgery, University of Maryland School of Medicine, Baltimore, MD 21201, USA.
| |
Collapse
|
14
|
Steady and transient flow analysis of a magnetically levitated pediatric VAD: time varying boundary conditions. Int J Artif Organs 2013; 36:693-9. [PMID: 24254838 DOI: 10.5301/ijao.5000240] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/28/2013] [Indexed: 11/20/2022]
Abstract
A magnetically levitated impeller within a pediatric ventricular assist device operates under highly transient flow conditions. In this study, computational analyses were performed to investigate the hydraulic performance and fluid forces on the impeller under the steady and dynamic flow conditions, including: 1) time-varying boundary conditions (TVBC) considering a pulsed pump flow rate and pulsed left ventricular pressure; 2) transient rotational sliding interfaces (TRSI) to capture virtual blade rotation. Under steady flow conditions, the pressure generation for 0.5-6 l/min over 6000-10000 rpm was 20-140 mmHg; experimental validation agreed to within 6-27%. Under transient flow conditions, the outflow pressure of the pump increased with higher inlet pressure during the TVBC simulation. During TVBC, the pressure rise across the pump decreased as a function of higher flow rates and increased as a function of lower flow rates. The radial fluid forces varied directly with the flow rate by demonstrating larger forces at higher flow rates. For TRSI simulations, pressure fluctuations due the blade passage frequency were found to have 12 peaks per revolution, having magnitude ranges of
0.7 and 1.0 mmHg for 8 000 and 10 000 rpm, respectively. At 8 000 rpm, the fluid forces ranged from 1.15-1.17 N (axial) and 0.02-0.11 N (radial). Transient simulations model implant scenarios more realistically and provide critical information about the fluid conditions in the pump.
Collapse
|
15
|
A new design and computational fluid dynamics study of an implantable axial blood pump. AUSTRALASIAN PHYSICAL & ENGINEERING SCIENCES IN MEDICINE 2013; 36:417-22. [PMID: 24203793 DOI: 10.1007/s13246-013-0225-x] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/18/2013] [Accepted: 10/21/2013] [Indexed: 10/26/2022]
Abstract
Considering small thoracic space, using implantable ventricular assist device requires reduction in a pump size. Among many available blood pumps, axial blood pumps have attracted greatly because of their small size. In this article, a new miniature axial blood pump has been designed and studied which can be easily implanted in the human body. In this design, the pump overall length decreased by a little increasing in the pump diameter, and new blade geometry is used to produce a streamlined, idealized, and nonobstructing blood flow path in the pump. By means of computational fluid dynamic, the flow pattern through the pump has been predicted and overall pump performance and efficiency has been computed. Also, to ensure a reliable VAD design, two methods for checking wall shear stress were used to confirm that this pump wouldn't cause serious blood damage.
Collapse
|
16
|
Development of a radial ventricular assist device using numerical predictions and experimental haemolysis. Med Eng Phys 2013; 35:1197-203. [PMID: 23384537 DOI: 10.1016/j.medengphy.2012.12.008] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2011] [Revised: 11/28/2012] [Accepted: 12/24/2012] [Indexed: 11/24/2022]
Abstract
The objective of this study was to demonstrate the potential of Computational Fluid Dynamics (CFD) simulations in predicting the levels of haemolysis in ventricular assist devices (VADs). Three different prototypes of a radial flow VAD have been examined experimentally and computationally using CFD modelling to assess device haemolysis. Numerical computations of the flow field were computed using a CFD model developed with the use of the commercial software Ansys CFX 13 and a set of custom haemolysis analysis tools. Experimental values for the Normalised Index of Haemolysis (NIH) have been calculated as 0.020 g/100 L, 0.014 g/100 L and 0.0042 g/100 L for the three designs. Numerical analysis predicts an NIH of 0.021 g/100 L, 0.017 g/100 L and 0.0057 g/100 L, respectively. The actual differences between experimental and numerical results vary between 0.0012 and 0.003 g/100 L, with a variation of 5% for Pump 1 and slightly larger percentage differences for the other pumps. The work detailed herein demonstrates how CFD simulation and, more importantly, the numerical prediction of haemolysis may be used as an effective tool in order to help the designers of VADs manage the flow paths within pumps resulting in a less haemolytic device.
Collapse
|
17
|
Fraser KH, Taskin ME, Griffith BP, Wu ZJ. The use of computational fluid dynamics in the development of ventricular assist devices. Med Eng Phys 2011; 33:263-80. [PMID: 21075669 PMCID: PMC3053072 DOI: 10.1016/j.medengphy.2010.10.014] [Citation(s) in RCA: 147] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2010] [Revised: 10/12/2010] [Accepted: 10/15/2010] [Indexed: 02/06/2023]
Abstract
Progress in the field of prosthetic cardiovascular devices has significantly contributed to the rapid advancements in cardiac therapy during the last four decades. The concept of mechanical circulatory assistance was established with the first successful clinical use of heart-lung machines for cardiopulmonary bypass. Since then a variety of devices have been developed to replace or assist diseased components of the cardiovascular system. Ventricular assist devices (VADs) are basically mechanical pumps designed to augment or replace the function of one or more chambers of the failing heart. Computational Fluid Dynamics (CFD) is an attractive tool in the development process of VADs, allowing numerous different designs to be characterized for their functional performance virtually, for a wide range of operating conditions, without the physical device being fabricated. However, VADs operate in a flow regime which is traditionally difficult to simulate; the transitional region at the boundary of laminar and turbulent flow. Hence different methods have been used and the best approach is debatable. In addition to these fundamental fluid dynamic issues, blood consists of biological cells. Device-induced biological complications are a serious consequence of VAD use. The complications include blood damage (haemolysis, blood cell activation), thrombosis and emboli. Patients are required to take anticoagulation medication constantly which may cause bleeding. Despite many efforts blood damage models have still not been implemented satisfactorily into numerical analysis of VADs, which severely undermines the full potential of CFD. This paper reviews the current state of the art CFD for analysis of blood pumps, including a practical critical review of the studies to date, which should help device designers choose the most appropriate methods; a summary of blood damage models and the difficulties in implementing them into CFD; and current gaps in knowledge and areas for future work.
Collapse
Affiliation(s)
- Katharine H Fraser
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | | | | | | |
Collapse
|
18
|
Zhang Y, Xue S, Gui XM, Sun HS, Zhang H, Zhu XD, Hu SS. A novel integrated rotor of axial blood flow pump designed with computational fluid dynamics. Artif Organs 2007; 31:580-5. [PMID: 17584484 DOI: 10.1111/j.1525-1594.2007.00425.x] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Due to the smaller size, smaller artificial surface, and higher efficiency, axial blood pumps have been widely applied in clinic in recent years. However, because of its high rotor speed, axial flow pump always has a high risk for hemolysis, which the red blood cells devastated by the shearing of tip clearance flow. We reported a novel design with the integrated blade-shroud structure that was expected to solve this problem by abolishing the radial clearance between blade and casing designed with the techniques of computational fluid dynamics (CFD). However, the numerical simulation result of the newly designed structure showed an unexpected backflow (where flow velocity is reverse of the main flow direction) at the blade tip. In order to eliminate this backflow, four flow passes were attempted, and the expansion angles (which reflect the radial amplification of the flow pass, on the meridional section, and should be defined as the angle between the center line of the flow pass and the axial direction) of the blades of the integrated rotor are 0 degrees, 8 degrees, 15 degrees, and 20 degrees, respectively. In the CFD result, it could be easily found as the expansion angles increased, the backflow was restrained gradually, and was eliminated at last. After numerous "cut and try" circles, the pump model was finally optimized. The numerical simulation of this model also showed a stable hydraulic characteristic.
Collapse
Affiliation(s)
- Yan Zhang
- Research Center for Cardiovascular Regenerative Medicine, Fuwai Hospital, China
| | | | | | | | | | | | | |
Collapse
|
19
|
Abstract
The axial blood pump with a magnetically suspended impeller is superior to other artificial blood pumps because of its small size. In this article, the distributions of velocity, path line, pressure, and shear stress in the straightener, the rotor, and the diffuser of the axial blood pump, as well as the gap zone were obtained using the commercial software, Fluent (version 6.2). The main focus was on the flow field of the blood pump. The numerical results showed that the axial blood pump could produce 5.14 L/min of blood at 100 mm Hg through the outlet when rotating at 11,000 rpm. However, there was a leakage flow of 1.06 L/min in the gap between the rotor cylinder and the pump housing, and thus the overall flow rate the impeller could generate was 6.2 L/min. The numerical results showed that 75% of the scalar shear stresses (SSs) were less than 250 Pa, and 10% were higher than 500 Pa within the whole pump. The high SS region appeared around the blade tip where a large variation of velocity direction and magnitude was found, which might be due to the steep angle variation at the blade tip. Because the exposure time of the blood cell at the high SS region within the pump was relatively short, it might not cause serious damage to the blood cells, but the improvement of blade profile should be considered in the future design of the axial pump.
Collapse
Affiliation(s)
- Leok Poh Chua
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore.
| | | | | | | |
Collapse
|
20
|
Zhu X, Zhang M, Zhang G, Liu H. Numerical investigation on hydrodynamics and biocompatibility of a magnetically suspended axial blood pump. ASAIO J 2007; 52:624-9. [PMID: 17117050 DOI: 10.1097/01.mat.0000242161.50276.1e] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022] Open
Abstract
A newly designed magnetically suspended axial blood pump is presented, in which a 5 degrees-of-freedom rotor is suspended by using two conical active magnetic bearings, each with a four-pole stator. The preferred configuration could provide a rather large moment of inertia to increase the rotating stability of the suspended rotor in the pump. The hydrodynamic performance and internal flow fields in the pump are investigated by computational fluid dynamics. The pump head flow characteristics and the efficiency-Q curves at various rotating speeds are obtained, and the detailed flow fields in the pump are determined numerically. The distribution of shear stress, including Reynolds shear stress, is studied and discussed. Also, special attention is given to the small clearance between the rotor and the pump shell where the reversed secondary flow is formed and can flush out the clearance to avoid the flow stagnations. The secondary flow as well as the magnetic bearings can reduce thrombus in the pump. To check the biocompatibility of the pump further, the hemolysis indexes of the pump are estimated on the basis of the computed results.
Collapse
Affiliation(s)
- Xianran Zhu
- School of Energy and Power Engineering, Xi'an Jiaotong University, China
| | | | | | | |
Collapse
|
21
|
Wang R, Lacour-Gayet FG, Lanning CJ, Rech BA, Kilfoil PJ, Hertzberg J, Shandas R. Initial Experience With the Development and Numerical and In Vitro Studies of A Novel Low-Pressure Artificial Right Ventricle for Pediatric Fontan Patients. ASAIO J 2006; 52:682-92. [PMID: 17117059 DOI: 10.1097/01.mat.0000249038.69048.3c] [Citation(s) in RCA: 17] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022] Open
Abstract
The Fontan operation, an efficient palliative surgery, is performed for patients with single-ventricle pathologies. The total cavopulmonary connection is a preferred Fontan procedure in which the superior and inferior vena cava are connected to the left and right pulmonary artery. The overall goal of this work is to develop an artificial right ventricle that can be introduced into the inferior vena cava, which would act to reverse the deleterious hemodynamics in post-Fontan patients. We present the initial design and computational analysis of a micro-axial pump, designed with the particular hemodynamics of Fontan physiology in mind. Preliminary in vitro data on a prototype pump are also presented. Computational studies showed that the new design can deliver a variety of advantageous operating conditions, including decreased venous pressure through proximal suction, increased pressure rise across the pump, increased pulmonary flows, and minimal changes in superior vena cava pressures. In vitro studies on a scaled prototype showed trends similar to those seen computationally. We conclude that a micro-axial flow pump can be designed to operate efficiently within the low-pressure, low-flow environment of cavopulmonary flows. The results provide encouragement to pursue this design to for in vitro studies and animal studies.
Collapse
Affiliation(s)
- Rui Wang
- Department of Mechanical Engineering, University of Colorado, Boulder, Colorado, USA
| | | | | | | | | | | | | |
Collapse
|
22
|
Untaroiu A, Wood HG, Allaire PE, Throckmorton AL, Day S, Patel SM, Ellman P, Tribble C, Olsen DB. Computational Design and Experimental Testing of a Novel Axial Flow LVAD. ASAIO J 2005; 51:702-10. [PMID: 16340354 DOI: 10.1097/01.mat.0000186126.21106.27] [Citation(s) in RCA: 32] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022] Open
Abstract
Thousands of cardiac failure patients per year in the United States could benefit from long-term mechanical circulatory support as destination therapy. To provide an improvement over currently available devices, we have designed a fully implantable axial-flow ventricular assist device with a magnetically levitated impeller (LEV-VAD). In contrast to currently available devices, the LEV-VAD has an unobstructed blood flow path and no secondary flow regions, generating substantially less retrograde and stagnant flow. The pump design included the extensive use of conventional pump design equations and computational fluid dynamics (CFD) modeling for predicting pressure-flow curves, hydraulic efficiencies, scalar fluid stress levels, exposure times to such stress, and axial fluid forces exerted on the impeller for the suspension design. Flow performance testing was completed on a plastic prototype of the LEV-VAD for comparison with the CFD predictions. Animal fit trials were completed to determine optimum pump location and cannulae configuration for future acute and long-term animal implantations, providing additional insight into the LEV-VAD configuration and implantability. Per the CFD results, the LEV-VAD produces 6 l/min and 100 mm Hg at a rotational speed of approximately 6300 rpm for steady flow conditions. The pressure-flow performance predictions demonstrated the VAD's ability to deliver adequate flow over physiologic pressures for reasonable rotational speeds with best efficiency points ranging from 25% to 30%. The CFD numerical estimations generally agree within 10% of the experimental measurements over the entire range of rotational speeds tested. Animal fit trials revealed that the LEV-VAD's size and configuration were adequate, requiring no alterations to cannulae configurations for future animal testing. These acceptable performance results for LEV-VAD design support proceeding with manufacturing of a prototype for extensive mock loop and initial acute animal testing.
Collapse
Affiliation(s)
- Alexandrina Untaroiu
- Departments of Mechanical and Aerospace Engineering, Virginia Artificial Heart Institute, University of Virginia, Charlottesville, VA 22904, USA.
| | | | | | | | | | | | | | | | | |
Collapse
|
23
|
Song X, Throckmorton AL, Wood HG, Allaire PE, Olsen DB. Transient and quasi-steady computational fluid dynamics study of a left ventricular assist device. ASAIO J 2005; 50:410-7. [PMID: 15497378 DOI: 10.1097/01.mat.0000136507.57707.0f] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022] Open
Abstract
The HeartQuest continuous flow left ventricle assist device (LVAD) with a magnetically levitated impeller operates under highly transient flow conditions. Due to insertion of the in-flow cannula into the apex of the left ventricle, the inlet flow rate is transient because of ventricular contraction, and the pump's asymmetric circumferential configuration with five rotating blades forces blood intermittently through the pump to the great arteries. These two transient conditions correspond to time varying boundary conditions and transient rotational sliding interfaces in computational fluid dynamics (CFD). CFD was used to investigate the pump's performance under these dynamic flow conditions. A quasi-steady analysis was also conducted to evaluate the difference between the steady and transient analyses and demonstrate the significance of transient analysis, especially for transient rotational sliding interfaces transient simulations. This transient flow analysis can be applied generally in the design process of LVADs; it provides more reliable fluid forces and moments on the impeller for successful design of the magnetic suspension system and motor.
Collapse
Affiliation(s)
- Xinwei Song
- Department of Mechanical and Aerospace Engineering, University of Virginia, Charlottesville, Virginia 22904, USA
| | | | | | | | | |
Collapse
|