Problems, tricks, and pearls in intramedullary nailing of proximal third tibial fractures

Extra-articular proximal tibia fracture fixation with locked plating versus intramedullary nailing: A meta-analysis

OBJECTIVES

This study compared outcomes of locked plating (LP) versus intramedullary nailing (IMN) techniques for treatment of extra-articular proximal-third tibia fractures.

METHODS

Data Sources: PubMed, Ovid MEDLINE STUDY SELECTION: Studies were included if they compared LP and IMN fixation for proximal one third tibial shaft fractures without articular extension or with simple articular extension into the tibial plateau. Minimum 1 year of clinical and radiographic follow up was used.

DATA EXTRACTION

Outcomes assessed included operative duration, postoperative knee range of motion (ROM), union outcomes (time to union, nonunion, malunion, delayed union), and incidence of postoperative complications (superficial and deep infection, secondary surgical intervention, compartment syndrome).

DATA SYNTHESIS

Separate random-effects meta-analyses were conducted for each outcome. For categorical data, relative risks were used whereas the standardized mean difference was used for continuous variables, with corresponding 95 % confidence intervals.

RESULTS

7 studies were included reporting the outcomes of 319 patients treated with LP and 300 treated with IMN. IMN fixation had significantly shorter time to union (p = 0.049) and lower risk for superficial infection (p = 0.028). However, LP conferred a significantly lower risk for malunion (p = 0.017) and postoperative compartment syndrome (p = 0.018).

CONCLUSION

IMN demonstrated significantly shorter time to union and lower risk of superficial infection when treating extra-articular proximal tibia fractures, while LP fixation demonstrated significantly lower risk for malunion and postoperative compartment syndrome. Although successful results can be achieved with good technique in LP and IMN fixation, a significant complication profile exists with these fractures regardless of construct choice.

LEVEL OF EVIDENCE

Therapeutic Level III.

Effect of fracture level on the residual fracture gap during tibial intramedullary nailing for tibial shaft fractures

INTRODUCTION

The development of fracture gap during intramedullary nailing in tibial fractures is associated with poor fracture fragment contact and increased time to union and complications. This study aimed to evaluate the effect of the fracture level in the development of the fracture gap and the effect of the fracture gap on pain, radiologic and functional outcomes, and complication rate.

MATERIAL AND METHOD

A total of 45 patients who underwent reamed intramedullary nailing due to closed transverse or short oblique tibial shaft fractures were divided into the proximal fracture group and the distal fracture group. The correlations between the visual analog scale (VAS) score, modified radiograph union score for tibias (RUST), and postoperative 1-year lower extremity functional scale scores, residual fracture gap, and time to union were evaluated.

RESULTS

The mean fracture gap amounts in the immediate postoperative anteroposterior and lateral radiographs were 5.6 ± 1.7 and 6.0 ± 1.7 mm in proximal fractures and 0.3 ± 2.4 mm and 0.4 ± 2.3 mm in distal fractures, respectively (p < 0.001 and p < 0.001, respectively). The mean time to union was 21.9 ± 2.9 weeks in the proximal fracture group and 16.7 ± 2.4 weeks in the distal fracture group (p < 0.000). The residual fracture gap amount significantly correlated with the level of fracture (r = 0.811, p < 0.001).

DISCUSSION

Tibial shaft fractures proximal to the isthmus level tend to develop significantly larger fracture gaps than distal fractures. It is associated with increased time to union and radiographic union scores as well as slightly higher complication and reoperation rates.

Avoiding deformity in proximal tibial nailing: risk factors, deformity rules, tips, and tricks

Malalignment is one of the most common problems linked to nailing of proximal tibial fractures. This review will cover technical aspects of intramedullary nailing and will help explain the various risk factors. Deformity rules aid in identifying the likely deformity and help to develop management strategies. Various tools and techniques are discussed which can help optimize the outcome.

Level of Evidence

Therapeutic Level V.

Immediate Weight Bearing as Tolerated Is Safe Following Intramedullary Fixation of Extra-articular Metaphyseal Proximal Tibia Fractures (OTA/AO 41-A)

OBJECTIVES

To determine whether immediate weight bearing after intramedullary fixation of extra-articular proximal tibia fractures (OTA/AO 41A) results in change of alignment before union.

DESIGN

Retrospective Review.

SETTING

Level I and Level II Trauma Center.

PATIENTS/PARTICIPANTS

Thirty-seven patients with 37 proximal tibial fractures, all whom could bear weight as tolerated postoperatively. Eighteen fractures were OTA/AO 41-A2, and 19 were OTA/AO 41-A3.

INTERVENTION

Intramedullary nailing of extra-articular proximal tibia fractures.

MAIN OUTCOME MEASUREMENTS

Change in fracture alignment or loss of reduction.

RESULTS

The average change in coronal alignment at the final follow-up was 1.22 ± 1.28 degrees of valgus and 1.03 ± 1.05 degrees of extension in the sagittal plane. Twenty-five patients demonstrated excellent initial alignment, 10 patients demonstrated acceptable initial alignment, and 2 patients demonstrated poor initial alignment. Five patients demonstrated a change in alignment from excellent to acceptable at the final follow-up. No patient went from excellent or acceptable initial alignment to poor final alignment. Five patients required unplanned secondary surgical procedures. Two patients required return to the operating room for soft-tissue coverage procedures, 2 patients required surgical debridement of a postoperative infection, and 1 patient underwent debridement and exchange nailing of an infected nonunion. No patient underwent revision for implant failure or loss of reduction.

CONCLUSION

Immediate weight bearing after intramedullary fixation of extra-articular proximal tibia fractures (OTA/AO 41A) led to minimal change in alignment at final postoperative radiographs.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

A Review of Proximal Tibia Entry Points for Intramedullary Nailing and Validation of The Lateral Parapatellar Approach as Extra-articular

Tibial shaft fractures are the most common long bone injury and are often treated surgically in an attempt to minimize complications. Although treatment options for tibial shaft fractures vary based on factors including open injury, severity of fracture, and soft tissue status, intramedullary nailing in adults has emerged as the preferred definitive option for stabilization. Therefore, the primary purposes of this review and cadaveric study were to evaluate the entry points for reamed tibial nails and the risks, benefits, and advantages of each approach. Due to concerns of violating the joint capsule and the generalized applicability to everyday practice of the extra-articular lateral parapatellar semi-extended technique, the secondary goal of this manuscript was to evaluate whether an intramedullary tibial nail can be consistently placed extra-articularly using the lateral parapatellar technique described by Kubiak et al. and generalizability to surgeons of varying experience.

Bone lengthening with magnetic nails. Experience in patients younger than 18

BACKGROUND AND GOAL

Bone elongation with magnetic endomedullary nails (MEN) has been proposed as an advantageous alternative to other techniques, by eliminating the drawbacks of external fixation. The aim of this work is to analyze the results and assess the complications in a series of patients under the age of 18.

MATERIAL AND METHODS

From 2014 to 2019, 31 elongations (23 femurs, 8 tibias) using MEN (Precice2™) have been performed in 28 patients younger than 18 (15 males and 13 females). In this observational retrospective study, only patients with follow-up longer than 18 months have been included. The average age has been 14.4 years (8-18). The most relevant aspects analyzed have been: previous shortening/deformity, elongation/correction achieved and time to full weight bearing. Complications and re-interventions have also been assessed.

RESULTS

The elongation achieved has been 5.5cm on average (3-8). In 28 elongations (90.3%) the planned goal of lengthening was achieved. The mean healing index was 1.1months/cm. More than half of elongations (55%) presented complications. Although they produced permanent sequelae in only two patients (7.1%), a total of 9 patients required re-intervention (13 operations). No infections were detected.

CONCLUSIONS

Bone lengthening with MEN in individuals younger than 18 has achieved its goal in more than 90% of patients in an effective, accurate and safe manner. The use of MEN in this series has eliminated the need for external fixators and has successfully tutorized the operated segment. The high number of complications detected in this study remains a concern.

Radiographic cortical thickness parameters as predictors of rotational alignment in proximal tibial shaft fractures: a cadaveric study

AIM

The treatment of tibial fractures with an intramedullary nail is an established procedure. However, torsional control remains challenging using intraoperatively diagnostic tools. Radiographic tools such as the Cortical Step Sign (CSS) and the Diameter Difference Sign (DDS) may serve as tools for diagnosing a relevant malrotation. The aim of this study was to investigate the effect of torsional malalignment on CSS and DDS parameters and to construct a prognostic model to detect malalignment.

METHODS

A proximal tibial shaft fracture was set in human tibiae. Torsion was set stepwise from 0° to 30° in external and internal torsion. Images were obtained with a C-arm and transferred to a PC for measuring the medical cortical thickness (MCT), lateral cortical thickness (LCT), tibial diameter (TD) in AP and the anterior cortical thickness (ACT) as well as the posterior cortical thickness (PCT) and the transverse diameter (TD) of the proximal and the distal main fragment.

RESULTS

There were significant differences between the various degrees of torsion for each of the absolute values of the examined variables. The parameters with the highest correlation were TD, LCT and ACT. A model combining ACT, LCT, PCT and TD lateral was most suitable model in identifying torsional malalignment. The best prediction of clinically relevant torsional malalignment, namely 15°, was obtained with the TD and the ACT.

CONCLUSION

This study shows that the CSS and DDS are useful tools for the intraoperative detection of torsional malalignment in proximal tibial shaft fractures and should be used to prevent maltorsion.

The Drape Tower: A "Hands-Free" Draping Technique for Intraoperative Lateral Fluoroscopy Views

Maintaining surgical field sterility during fracture surgery is critical for reducing the likelihood of postoperative infection. Lateral fluoroscopic views are frequently obtained by rotating the emitter under the bed and up immediately adjacent to the sterile field on the side of the injured limb. Contamination can be prevented by sterilely covering the emitter with each rotation from the upright to the lateral positions. Here, we describe a novel draping setup, which maintains fluoroscopic coverage in a "hands-free" manner. The technique uses widely available materials and allows the surgeon to proceed with surgery without the need for additional hands to manage the drape.

The standard sagittal starting point and entry angle for tibia intramedullary nails results in malreduction of proximal tibial fractures

INTRODUCTION

The aim of this study was to determine the sagittal starting point and entry angle necessary for anatomic reduction in proximal tibial fractures and to compare reductions obtained using a standard versus modified sagittal entry angle.

METHODS

Extra-articular proximal tibial fracture sawbone models were divided into three groups. The first group was used to determine the sagittal starting point and entry angle necessary for an anatomic reduction by inserting nails into the distal fragment and then reducing the proximal fragment over the nail. The second and third groups had nails inserted through the standard coronal and sagittal starting point using the standard sagittal entry angle (parallel to the anterior cortex) versus a more posteriorly directed modified sagittal entry angle (directed at the center of the tibia at the level of the tibia tubercle prominence). Fracture gapping and translation in the sagittal plane were measured for each group.

RESULTS

Anatomic reduction was only possible with a sagittal starting point that was too posterior for actual use. The standard sagittal entry angle resulted in greater posterior fracture translation and less anterior fracture gapping then the modified sagittal entry angle, 10.6 ± 1.1 versus 1.6 ± 2.8 mm (p < 0.01) and 1.3 ± 0.5 versus 5.3 ± 2.5 mm (p = 0.01), respectively.

CONCLUSION

Anatomic reduction was not achieved with the standard sagittal starting point and entry angle. Considering these finding, surgeons should have a low threshold to utilize adjunct reduction methods for these injuries.

Intramedullary Nailing and Minimally Invasive Percutaneous Plate Osteosynthesis in Treatment of Displaced Clavicular Mid-shaft Fractures: A Prospective Study

OBJECTIVE

To compare the difference between MIPO and IMN methods in the treatment of displaced clavicular mid-shaft fractures.

METHODS

A total 163 patients were consecutively enrolled and randomly divided into the MIPO group or the IMN group. Clinical characteristics and outcomes including age, gender, causes of fractures, and AO/OTA type as well as hospitalization time, healing time, and postoperative complications were analyzed. Constant-Murley scores and DASH scores were used for assessment of shoulder joint and upper extremity function, respectively.

RESULTS

In this study, 82 cases received MIPO and 81 cases received IMN. The mean operation time, mean bleeding volume, mean hospitalization time, and mean healing time showed no significant difference between the MIPO and IMN groups. At 3 months after surgery, Constant-Murley scores were significantly higher and DASH scores were significantly lower in the MIPO group than the IMN group. No significant difference was observed for both indexes at 6 months. The fracture nonunion rate was significantly lower in the MIPO group. No significant difference was found in other complications.

CONCLUSION

Both methods were effective for the treatment of displaced clavicular mid-shaft fractures. However, the MIPO method might be better for recovery of shoulder and upper extremity function in the short term and might have a lower nonunion rate.

Use of a Novel Tibial Traction Triangle for Intramedullary Nailing of Tibia Fractures

Malalignment after intramedullary nailing of proximal and distal tibia fractures remains a significant problem. We describe the use of a novel device to ease treatment of tibia fractures that undergo intramedullary nailing. The tibial traction triangle is simple and easy to use and allows for better reductions, leading to lower rates of malalignment. A prospective series of 11 patients is presented.

Infrapatellar vs. suprapatellar approach to obtain an optimal insertion angle for intramedullary nailing of tibial fractures

BACKGROUND

During intramedullary nailing of tibial fractures, the insertion angle of the nail is of great importance. When the nail impacts the posterior cortex due to a large insertion angle with a dorsal target course, higher insertion forces are needed, and the danger of iatrogenic fractures increases. Accordingly, the insertion direction should be as parallel as possible to the longitudinal axis of the tibia. We aimed to confirm the hypothesis that intramedullary nailing of tibial fractures can be performed with smaller insertion angles via a suprapatellar approach rather than infrapatellar approach.

METHODS

In 19 human bodies of donors with intact tibiae, we performed intramedullary nailing by both a suprapatellar and an infrapatellar approach. The correct entry point was determined by fluoroscopy. Subsequently, the medullary canal was reamed up to a diameter of 10 mm, and a 9 mm polytetrafluorethylen tube was inserted instead of a tibia nail. The angle between the proximal aspect of the tube and the longitudinal axis of the tibia was measured using a computer-assisted surgery system.

RESULTS

The angle between the proximal aspect of the inserted tube, simulating the tibial nail, and the longitudinal tibial axis was significantly larger when using the infrapatellar approach.

CONCLUSIONS

We achieved an insertion angle significantly more parallel to the longitudinal axis when using a suprapatellar approach for intramedullary nailing of tibial fractures. Thereby, both the risk of iatrogenic fracture of the posterior cortex and apex anterior angulation of the short proximal fragment can be reduced during intramedullary nailing of tibial fractures.

Intramedullary Nail and Plate Combination Fixation for Complex Distal Tibia Fractures: When and How?

Intramedullary nail and plate combination techniques have been described mostly for use in the proximal tibia. However, the nail and plate combination technique can also be used in the distal tibia, to counteract the deforming forces that cause construct failure and nonunion. In this article, we review pertinent anatomy and biomechanics and offer case examples that highlight the indications and applications of the nail and plate combination technique for distal tibia fractures.

Suprapatellar nailing of tibial fractures-Indications and technique

Intramedullary nailing is the standard procedure for surgical treatment of closed and Gustilo-Anderson Grade I-II° open fractures of the tibial shaft. The use of intramedullary nailing for the treatment of proximal metaphyseal tibia fractures is frequently followed by postoperative malalignment, whereas plate osteosynthesis is associated with higher rates of postoperative infection. Intramedullary nailing of tibial fractures is generally performed through an infrapatellar approach. The injured extremity must be positioned at a minimum of 90° of flexion in the knee joint to achieve optimal exposure of the correct entry point. The tension of the quadriceps tendon causes a typical apex anterior angulation of the proximal fragment. The suprapatellar approach improves reduction of the fracture and reduces the occurrence of malalignment during intramedullary nailing of extra-articular proximal tibial fractures. The knee is positioned in 20° of flexion to neutralise traction forces secondary to the quadriceps muscle, thus preventing an apex anterior angulation of the proximal fragment. An additional advantage of the technique is that it allows the surgeon to avoid or minimise further soft tissue damage because of the distance between the optimal incision point and the usual area of soft tissue damage.