High graft resorption rates with dense cancellous allograft in anterior cervical discectomy and fusion

Could the Type of Allograft Used for Anterior Cervical Discectomy and Fusion Affect Surgical Outcome? A Comparison Between Cortical Ring Allograft and Cortico-Cancellous Allograft

Backgroud

Allograft is predominantly used interbody spacers for anterior cervical discectomy and fusion (ACDF). The cortico-cancellous allograft has weaker mechanical strength as it is an artificial composite of the cancellous and cortical parts. Additionally, whether utilizing a firmer allograft, such as the cortical ring, leads to better outcomes is unclear. Therefore, we aimed to compare the surgical outcomes of cortical ring and cortico-cancellous allografts in ACDF.

Methods

Patients who underwent ACDF using allograft and were followed up for > 1 year were retrospectively reviewed. Patient characteristics, including fusion rates (assessed by interspinous motion [ISM], intra-graft bone bridging, and extra-graft bone bridging), subsidence, allograft complications (e.g., allograft fracture and resorption), and patient-reported outcome measures (neck pain visual analog scale [VAS], arm pain VAS, and neck disability index), were assessed. Patients were divided into 2 groups based on the allograft used: cortical ring and cortico-cancellous allograft groups. Subgroup analysis was subsequently conducted in single- and multi-level operation groups.

Results

A total of 227 patients were included. Of them, 134 (59.0%) and 93 (41.0%) underwent ACDF using cortical ring and cortico-cancellous allograft, respectively. In single-level operations, the cortico-cancellous allograft significantly frequented allograft resorption (24 / 66, 36.4%) than the cortical ring allograft (1 / 28, 3.7%) (p = 0.001). The cortico-cancellous allograft group demonstrated significantly greater subsidence. However, the fusion rates did not significantly differ between the 2 groups. In multi-level operations, the cortico-cancellous allograft (5 / 27, 18.5%) resulted in a significantly higher fracture rate than the cortical ring allograft (5 / 105, 4.7%) (p = 0.030). The fusion rate at 1-year postoperative assessed using ISM (63.2% vs. 55.5%) and intra-graft bone bridging (66.7% vs. 40.7%) was higher in the cortical ring group; however, the difference was not significant. The patient-reported outcomes at 1-year postoperative did not demonstrate significant intergroup differences both in single- and multi-level operations.

Conclusions

Allograft resorption or fracture occurs more frequently with cortico-cancellous than cortical ring allografts. Despite the frequent occurrence of allograft-related complications with cortico-cancellous allografts, the fusion rate was not significantly affected. Due to the higher rate of allograft resorption or fractures and greater subsidence with cortico-cancellous allografts, cortical ring allografts might yield more stable results in ACDF.

Incidence of Complications With Precontoured Allograft Wedges in Foot and Ankle Surgery

BACKGROUND

Precontoured cancellous allograft wedges have gained popularity in foot and ankle procedures in recent years because of their ease of use and ability to decrease operative time. A high rate of resorption of such wedges was noted anecdotally by the senior authors, particularly in 2022. The purpose of this study was to identify the resorption and complication rates of precontoured allograft wedges over time.

METHODS

A retrospective review was performed of patients who had a precontoured allograft wedge from a single source implanted during foot and ankle surgery between 2017 and 2022 at a single institution. Patient demographics, indication for graft use, and fixation method were obtained from chart review, and differences between patients with and without nonunion were analyzed. Radiographic review was completed to identify patients with graft resorption and/or nonunion.

RESULTS

Of the 334 wedges implanted, 24 grafts (7.2%) resorbed and an additional 10 wedges (2.9%) developed a nonunion without resorption. Resorption was noted as early as 5.7 weeks postoperatively and as late as 36.6 weeks postoperatively. Older patient age, body mass index (BMI) >30, and the Lapidus graft type were significantly associated with greater risk of resorption or nonunion.

CONCLUSION

We observed an overall radiographic complication rate of 10% with the use of precontoured cancellous wedges. Older age, BMI >30, and Lapidus wedge type were associated with increased risk of radiographic complication. Patients should be counseled on the risk of resorption and nonunion, and caution should be exercised when contemplating the use of precontoured allograft cancellous wedges in foot and ankle surgery.

Porous 3D Printed Titanium Cages in Anterior Cervical Discectomy and Fusion are Associated With Less Subsidence, Improved Maintenance of Segmental Lordotic Correction, and Similar Clinical Outcomes as Allograft

STUDY-DESIGN

Retrospective chart review.

OBJECTIVES

Investigate radiographic and clinical outcomes of 3D printed titanium cages (3DTC) vs allograft in patients undergoing Anterior cervical discectomy and fusion (ACDF).

METHODS

Consecutive series of patients undergoing ACDF with 3DTC were compared to patients using corticocancellous allograft. Cage subsidence, fusion status, sagittal alignment, and patient-reported-outcomes. Radiographic evaluation was performed on the closing intraoperative x-ray and compared to films at 6-weeks, 6-months, and 1-year. Cage subsidence was calculated based on the amount of settling into superior and inferior endplates compared to the intraoperative x-ray. Fusion was assessed based on < 1 mm of flexion/extension motion. Sagittal alignment parameters and patient-reported-outcomes were measured.

RESULTS

Seventy six-patients/(120 levels) in 3DTC group and 77-patients/(115 levels) in allograft group were evaluated. No significant differences were noted in patient demographics, level fused or the number of levels fused between the groups. The most common level fused was C5-6. 3DTC had a significantly lower subsidence rate at all-time points as compared to allograft (P < .001). 3DTC maintained segmental lordosis better than allograft at all-time points including 1-year postop (P < .001). No significant differences were noted in fusion rate for 3DTC vs allograft at 6-months (P > .05). There were no significant differences in patient-reported-outcomes.

CONCLUSION

3D printed titanium cages had similar patient-reported outcomes and fusion rates as allograft, but less subsidence at all-time points. 3D printed titanium cages better maintained the segmental lordosis at the operative level at all-time points. Although longer term evaluation is needed, based on these results, 3DTC appear to be viable graft options for ACDF that better maintain disc space height and improve segmental lordotic interbody correction.

Comparison of Different Osteobiologics in Terms of Imaging Modalities and Time Frames for Fusion Assessment in Anterior Cervical Discectomy and Fusion: A Systematic Review

STUDY DESIGN

Systematic review.

OBJECTIVES

The study's primary objective was to determine how osteobiologic choice affects fusion rates in patients undergoing anterior cervical discectomy and fusion (ACDF). The study's secondary objectives were to 1) determine the optimal timing of fusion assessment following ACDF and 2) determine if osteobiologic type affects the timing and optimal modality of fusion assessment.

METHODS

A systematic search of PubMed/MEDLINE was conducted for literature published from 2000 through October 2020 comparing anterior fusion in the cervical spine with various osteobiologics. Both comparative studies and case series of ≥10 patients were included.

RESULTS

A total of 74 studies met the inclusion criteria. Seventeen studies evaluated the efficacy of autograft on fusion outcomes, and 23 studies assessed the efficacy of allograft on fusion outcomes. 3 studies evaluated the efficacy of demineralized bone matrix, and seven assessed the efficacy of rhBMP-2 on fusion outcomes. Other limited studies evaluated the efficacy of ceramics and bioactive glasses on fusion outcomes, and 4 assessed the efficacy of stem cell products. Most studies utilized dynamic radiographs for the assessment of fusion. Overall, there was a general lack of supportive data to determine the optimal timing of fusion assessment meaningfully or if osteobiologic type influenced fusion timing.

CONCLUSIONS

Achieving fusion following ACDF appears to remain an intricate interplay between host biology and various surgical factors, including the selection of osteobiologics. While alternative osteobiologics to autograft exist and may produce acceptable fusion rates, limitations in study methodology prevent any definitive conclusions from existing literature.

Speed and quality of interbody fusion in porous bioceramic Al2O3 and polyetheretherketone cages for anterior cervical discectomy and fusion: a comparative study

BACKGROUND

The objective of this prospective randomized monocentric study is to compare the speed and quality of interbody fusion of implanted porous Al₂O₃ (aluminium oxide) cages with PEEK (polyetheretherketone) cages in ACDF (anterior cervical discectomy and fusion).

MATERIALS AND METHODS

A total of 111 patients were enrolled in the study, which was carried out between 2015 and 2021. The 18-month follow-up (FU) was completed in 68 patients with an Al₂O₃ cage and 35 patients with a PEEK cage in one-level ACDF. Initially, the first evidence (initialization) of fusion was evaluated on computed tomography. Subsequently, interbody fusion was evaluated according to the fusion quality scale, fusion rate and incidence of subsidence.

RESULTS

Signs of incipient fusion at 3 months were detected in 22% of cases with the Al₂O₃ cage and 37.1% with the PEEK cage. At 12-month FU, the fusion rate was 88.2% for Al₂O₃ and 97.1% for PEEK cages, and at the final FU at 18 months, 92.6% and 100%, respectively. The incidence of subsidence was observed to be 11.8% and 22.9% of cases with Al₂O₃ and PEEK cages, respectively.

CONCLUSIONS

Porous Al₂O₃ cages demonstrated a lower speed and quality of fusion in comparison with PEEK cages. However, the fusion rate of Al₂O₃ cages was within the range of published results for various cages. The incidence of subsidence of Al₂O₃ cages was lower compared to published results. We consider the porous Al₂O₃ cage as safe for a stand-alone disc replacement in ACDF.

Morphologic Change of CorticoCancellous Allograft Used for Anterior Cervical Discectomy and Fusion

STUDY DESIGN

Retrospective cohort study.

OBJECTIVE

The aim of this study was to evaluate the incidence and clinical implications of graft morphologic changes in corticocancellous allografts used for anterior cervical discectomy and fusion (ACDF), such as graft resorption or fracture.

SUMMARY OF BACKGROUND DATA

Although cortico-cancellous allograft is one of the most commonly used interbody spacer for ACDF, clinical implications of allograft resorption or fracture is unclear.

METHODS

One-hundred and thirty-eight consecutive patients who underwent ACDF for degenerative cervical myelopathy or radiculopathy were retrospectively reviewed. Patients with allograft morphologic changes, including graft resorption and fracture (morphologic change group), were compared with patients without morphologic changes (unchanged group). Furthermore, operated segments with morphologic changes were compared with unchanged segments. Patient characteristics, cervical lordosis, segmental lordosis, fusion, subsidence, neck pain visual analogue scale (VAS), arm pain VAS, and neck disability index (NDi) scores were evaluated.

RESULTS

Ninety patients (149 segments) were included in the study. Allograft resorption or fracture was detected in 46 (51.1%) patients and 81 (54.3%) segments, respectively. The fusion rate of morphologic change segments was significantly lower than that of the unchanged segments (P < 0.001). Furthermore, segments with morphologic changes had significantly higher rates of subsidence compared to unchanged segments ( P < 0.001). Segmental lordosis at the final follow-up was significantly smaller in the morphologic change segments ( P < 0.001). Neck pain VAS, arm pain VAS, and NDI scores did not demonstrate significant intergroup differences.

CONCLUSION

Corticocancellous allograft demonstrated a high rate of graft morphologic change (54.3%). Graft resorption or fracture was associated with increased pseudarthrosis, subsidence, and decreased postoperative segmental lordosis; however, the clinical results were not significantly affected. Caution is needed when choosing to use corticocancellous allografts for ACDF due to the high rate of graft resorption or fracture and the negative implications of these risks.

Nonunion Rates After Anterior Cervical Discectomy and Fusion: Comparison of Polyetheretherketone vs Structural Allograft Implants

BACKGROUND

Although advances in implant materials, such as polyetheretherketone (PEEK), have been developed aimed to improve outcome after anterior cervical discectomy and fusion (ACDF), it is essential to confirm whether these changes translate into clinically important sustained benefits.

OBJECTIVE

To compare the radiographic and clinical outcomes of patients undergoing up to 3-level ACDF with PEEK vs structural allograft implants.

METHODS

In this cohort study, radiographic and symptomatic nonunion rates were compared in consecutive patients who underwent 1 to 3 level ACDF with allograft or PEEK implant. Prospectively collected clinical data and patient-reported outcome (PRO) scores were compared between the allograft and PEEK groups. Regression analysis was performed to determine the predictors of nonunion.

RESULTS

In total, 194 of 404 patients met the inclusion criteria (79% allograft vs 21% PEEK). Preoperative demographic variables were comparable between the 2 groups except for age. The rate of radiographic nonunion was higher with PEEK implants (39% vs 27%, P = .0035). However, a higher proportion of nonunion in the allograft cohort required posterior instrumentation (14% vs 3%, P = .039). Patients with multilevel procedures and PEEK implants had up to 5.8 times the risk of radiographic nonunion, whereas younger patients, active smokers, and multilevel procedures were at higher risk of symptomatic nonunion.

CONCLUSION

Along with implant material, factors such as younger age, active smoking status, and the number of operated levels were independent predictors of fusion failure. Given the impact of nonunion on PRO, perioperative optimization of modifiable factors and surgical planning are essential to ensure a successful outcome.

Long-Term Radiographic and Functional Outcomes of Patients With Absence of Radiographic Union at 2 Years After Single-Level Anterior Cervical Discectomy and Fusion

STUDY DESIGN

Retrospective radiographic investigation.

OBJECTIVE

To evaluate the long-term radiographic and functional outcomes of patients in whom there is absence of radiographic union at 2 years after single-level anterior cervical discectomy and fusion (ACDF).

METHODS

Thirty-one patients were evaluated at standard postoperative time intervals per index trial protocol. Plain film radiographic fusion criteria at the arthrodesis level was defined as interspinous motion (ISM) <1 mm with corresponding motion at a non-arthrodesed superjacent level ISM ≥4 mm. Radiographs and functional outcome measures were acquired at each follow-up visit. Delayed union was defined as lack of radiographic union by 24 months.

RESULTS

Nine patients demonstrated radiographic evidence of delayed radiographic union at 24 months. Of those 9 patients, 5 patients demonstrated evidence of union during the follow-up period to 72 months. Despite the absence of radiographic union based on our criteria, 3 of the 4 remaining patients reported remarkable improvements in pain scores and functional outcomes.

CONCLUSIONS

The natural history of delayed union at 24 months after ACDF was still favorable despite the prolonged delay in union. The majority of patients (5 of 9) without radiographic union at 24 months did proceed to radiographic union by final follow-up. In addition, patients that did not meet our criteria for fusion maintained postoperative improvements in patient-reported outcome scores. In summary, our study patients undergoing a single-level ACDF with asymptomatic radiographic delayed union at 24 months can expect maintained improvements in postoperative patient-reported outcomes scores and can still progress to successful radiographic fusion.

Structural Allograft Versus PEEK Implants in Anterior Cervical Discectomy and Fusion: A Systematic Review

STUDY DESIGN

Systematic literature review.

OBJECTIVE

Our primary objective was to compare reported fusion rates after anterior cervical discectomy and fusion (ACDF) using structural allograft versus polyetheretherketone (PEEK) interbody devices in patients with cervical spine degeneration. Our secondary objectives were to compare differences in rates of subsidence and reoperation and in patient-reported outcomes between the 2 groups.

METHODS

Through a systematic review of the English-language literature using various databases, we identified 4702 articles. After we applied inclusion and exclusion criteria, 14 articles (7 randomized controlled trials, 4 prospective studies, and 3 retrospective studies) reporting fusion rates of structural allograft or PEEK interbody devices were eligible for our analysis. No randomized controlled trials compared outcomes of structural allograft versus PEEK interbody devices. Extracted data included authors, study years, study designs, sample sizes, patient ages, duration of follow-up, types of interbody devices used, fusion rates, definition of fusion, reoperation rates, subsidence rates, and patient-reported outcomes.

RESULTS

Fusion rates were 82% to 100% for allograft and 88% to 98% for PEEK interbody devices. The reported data were insufficient to perform meta-analysis. Structural allograft had the highest reported rate of reoperation (14%), and PEEK interbody devices had the highest reported subsidence rate (18%). Patient-reported outcomes improved in both groups. There was insufficient high-quality evidence to compare the associations of various PEEK modifications with fusion rates.

CONCLUSION

Fusion rates were similar between structural allograft and PEEK interbody devices when used for ACDF for cervical spine degeneration. Currently, there is insufficient high-quality evidence to assess associations of PEEK modifications with fusion rates.

LEVEL OF EVIDENCE

II.

Bone Graft Substitutes in Single- or Double-Level Anterior Cervical Discectomy and Fusion: A Systematic Review

STUDY DESIGN

Systematic review OBJECTIVE.: To undertake a systematic review of published literature to evaluate efficacy of bone graft substitutes on radiographic and clinical outcomes in single- or double-level anterior cervical discectomy and fusion (ACDF) for degenerative disease.

SUMMARY OF BACKGROUND DATA

ACDF is one of the most common spinal surgeries completed in the United States. Today bone graft substitutes including ceramic-based synthetic bone grafts, allografts, bone morphogenetic proteins (BMPs), mesenchymal stem cells, and bone marrow aspirate are widely used to enhance fusions; even though the efficacy of these substitutes is poorly defined. Critical evaluation of these products is necessary to optimize radiographic and clinical outcomes for ACDF in degenerative disease.

METHODS

A systematic literature review of 22 published articles was conducted. All articles reported results on patients who underwent a single- or double-level ACDF performed using a bone graft substitute and reported results on radiographic fusion rates at least 6 months after surgery.

RESULTS

All studies using BMP showed 100% fusion rate despite length of the study or whether additional bone graft substitutes were used. Use of only ceramic-based synthetics had the lowest fusion rate, 80.5%. Use of only mesenchymal stem cells resulted in an average fusion rate of 87.7%. When used alone, allograft resulted in an average fusion rate of 87.3%. This was significantly influenced by one outlier, Kim et al, which when removed, increased the fusion rate to 93.5%. Clinical outcomes were improved postoperatively irrespective of the graft used, although dysphagia was significantly greater in studies using BMP (P < 0.001).

CONCLUSION

Allograft alone has the lowest cost with similar fusion rates and clinical outcomes compared to other bone graft substitutes. Physicians should consider this when choosing to use bone graft substitutes for routine ACDFs.

LEVEL OF EVIDENCE

4.

Fivefold higher rate of pseudarthrosis with polyetheretherketone interbody device than with structural allograft used for 1-level anterior cervical discectomy and fusion

In BriefThe authors examined fusion rates after single-level anterior cervical discectomy and fusion, comparing use of a structural allograft with use of polyetheretherketone (PEEK) interbody devices packed with bone graft. The results demonstrate superior results of structural allograft in terms of arthrodesis rates and reoperation rates. Currently, reimbursement rates substantially favor the use of PEEK and other synthetic devices, which the authors believe should be changed based on the results of this study.

Anterior Cervical Discectomy and Fusion Outcomes over 10 Years: A Prospective Study

STUDY DESIGN

Prospective cohort study with >10-year follow-up.

OBJECTIVE

To assess the long-term, >10-year clinical outcomes of anterior cervical discectomy and fusion (ACDF) and to compare outcomes based on primary diagnosis of disc herniation, stenosis or advanced degenerative disc disease (DDD), number of levels treated, and preexisting adjacent level degeneration.

SUMMARY OF BACKGROUND DATA

ACDF is a proven treatment for patients with stenosis and disc herniation and results in significantly improved short- and intermediate-term outcomes. Motion preservation treatments may result in improved long-term outcomes but need to be compared to long-term ACDF outcomes reference.

METHODS

Patients who had disc herniation, stenosis, and DDD and underwent ACDF with or without decompression were prospectively enrolled and followed for a minimum of 10 years with outcome assessment at various intervals. All 159 consecutive patients had autogenous tricortical iliac crest bone graft and plate instrumentation used. Outcomes included visual analog scale for neck and arm pain. pain drawing, Oswestry Disability Index, and self-assessment of procedure success. Preoperative adjacent-level disc degeneration, pseudarthrosis, and secondary operations were analyzed.

RESULTS

For all diagnostic groups, significant outcomes improvement was seen at all follow-up periods for all scales relative to preoperative scores. Outcomes were not related to age, gender, number of levels treated, and minimally to preexisting degeneration at the adjacent level. The use of narcotic pain medication decreased substantially. Neurological deficits almost all resolved. Patient self-reported success ranged from 85% to 95%. Over the long term, additional surgery for pseudarthrosis (10%) occurred in the early follow-up period, and for adjacent segment degeneration (21%), which occurred linearly during the >10-year follow-up period.

CONCLUSION

ACDF leads to significantly improved outcomes for all primary diagnoses and was sustained for >10 years' follow-up. Secondary surgeries were performed for pseudarthrosis repair and for symptomatic adjacent-level degeneration.

LEVEL OF EVIDENCE

2.

Posterolateral Spinal Fusion in Rabbits Using a RP-based PLGA/ TCP/Col/BMSCs-OB Biomimetic Grafting Material

Three-dimensional highly porous poly(DL-lactic-co-glycolic acid)/ tricalcium phosphate (PLGA/TCP) scaffolds were fabricated using a rapid prototyping technique (RP). The 3D rhombic lamellar PLGA/TCP carriers (20 mm × 20 mm × 3 mm) subsequently were coated with collagen type I (Col) to produce PLGA/TCP/Col composites. Both the RP-based PLGA/TCP scaffolds and the PLGA/TCP/Col composites were observed by scanning electron microscopy. Forty New Zealand white rabbits were equally randomized into 2 groups (group A and group B) and bilaterally underwent posterolateral intertransverse process arthrodesis at the L4—L5 level using the following graft materials: In group A, PLGA/TCP/Col/BMSCs-OB composites (on the right side, group A1, n = 20) and autogenous iliac bone grafts (on the left side, group A2, n = 20) were used; In group B, PLGA/TCP scaffolds plus fresh autogenous bone marrow (on the right side, group B1, n = 20) and PLGA/TCP scaffolds alone (on the left side, group B2, n = 20) were utilized. In group A1, rabbit bone marrow stromal cells (BMSCs) were isolated and cultured under the osteogenic conditions (BMSCs-OB). Structural PLGA/TCP/Col composites then were efficiently loaded with BMSCs-OB and cultured 5 days to make PLGA/TCP/ Col/BMSCs-OB biomaterials. Rabbits were sacrificed after 12-week follow-up and the spinal fusion were evaluated by a general observation, a manual palpation test, histological analyses and radiography. As a result, RP established PLGA/TCP scaffolds with appropriate biomaterial properties including satisfactory microstructure, inter-connectivity and porosity. Modifications to the structural highly porous PLGA/TCP scaffolds with Col (PLGA/TCP/Col) essentially increased the affinity of the carriers to seeding cells. In group A1, radiological evaluation revealed strong ability of new bone formation and bony fusion in the implanted sites and histological analyses showed highly cellular bone marrow between the newly formed trabecular bone was present in the fusion mass. In group A2, there was a reduced amount of newly formed bone. In group B1, only a few bony fusions were obtained. In group B2, PLGA/TCP scaffolds were biocompatible and biodegradable; whereas, no newly formed bone or bony fusion was found. Twelve weeks after surgery, spinal fusion rates in groups of A1, A2, B1, and B2 were 70.0%(14/20), 45.0%(9/20), 15.8%(3/19), and 0%(0/19), respectively. The rates of fusion were significantly higher in groups of A1 and A2 compared with groups of B1 and B2 (p<0.01), and there was no significant difference of fusion rate between group A1 and group A2 (p>0.05). Therefore, RP-based 3D PLGA/TCP/Col/BMSCs-OB biomaterial holds promise as a bone grafting substitute for spinal fusion. Our attempts may provide a novel method for biofabrication of the bionic construct.

Intervertebral Spinal Fusion Using a RP-based PLGA/TCP/bBMP Biomimetic Grafting Material

Three-dimensional highly porous poly(DL-lactic-co-glycolic acid)/tricalcium phosphate (PLGA/TCP) scaffolds were synthesized via a rapid prototyping (RP) technique. Bovine bone morphogenetic protein (bBMP) was loaded into the biopolymer scaffolds (PLGA/TCP/bBMP). Both the PLGA/TCP scaffolds and the PLGA/TCP/bBMP composites were evaluated by scanning electron microscopy. Lumbar intervertebral body fusion at L2~3 and L4~5 levels were performed on 15 goats using one of the following graft materials: RP synthesized PLGA/TCP scaffolds (group A), PLGA/TCP/bBMP composites (group B), and autogenous iliac bone graft (group C). All animals were sacrificed 24 weeks after surgery and the spine fusions evaluated by manual palpation tests, histological analyses, and radiography. In group A, the histological analyses showed that the PLGA/TCP scaffolds were biocompatible and biodegradable; however, no new bone was found. In group B, highly cellular bone marrow between the new trabecular bone was present in the fusion mass. In group C, there was a lesser amount of new bone. Twenty-four weeks after surgery, the fusion rate of lumbar intervertebral body fusion in group A, B, and C was 10% (1/10), 80% (8/10), and 50% (5/10), respectively. The fusion rate was significantly higher in group B compared with groups of A and C (p<0.01). Based on these results, extracted bBMP can be loaded in vitro into RP-based highly porous structural PLGA/TCP scaffolds to fabricate new graft composites that appear to be more effective for intervertebral spinal fusions. This biomimetic artificial grafting material holds promise as a tool for spine surgery.

Bone graft substitutes in anterior cervical discectomy and fusion

Anterior cervical discectomy with fusion is a common surgical procedure for patients suffering pain and/or neurological deficits and unresponsive to conservative management. For decades, autologous bone grafted from the iliac crest has been used as a substrate for cervical arthrodesis. However patient dissatisfaction with donor site morbidity has led to the search for alternative techniques. We present a literature review examining the progress of available grafting options as assessed in human clinical trials, considering allograft-based, synthetic, factor- and cell-based technologies.