Safety and Efficacy of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) in Craniofacial Surgery

Machine learning models for predicting configuration of modified knuckle epitope peptides of BMP-2 protein using mesoscale simulation data

The high doses of bone morphogenetic proteins (BMPs) cause undesired side effects in skeletal tissue regeneration. An alternative approach is to use the bioactive knuckle epitope domain of BMP-2 (BMP2-KEP) with an open-arm structure as part of the protein for engineering skeletal tissues. However, the osteogenic activity of this peptide, in the free state, is orders of magnitude lower than the native protein which is attributed to the closed-arm structure of the free peptide. The objective of this work was to develop a quantitative structure activity relationship (QSAR) using different machine learning (ML) models to correlate the different 20-mer sequences of the modified BMP2-KEP to their configurational properties. As the existing structure-property data for osteogenic peptides are insufficient for training ML models, the SIMFIM mesoscale simulation model was used to obtain structural properties, such as radius of gyration (Rg) and end-to-end distance (EtE), of the modified BMP2-KEP sequences to create a database. For ML modeling, the residues in the 20-mer sequences, as the input features of the database, were represented by different amino acid descriptor (AAD) scales. The performances of all the models were compared using the R2 performance metric. Permutation importance and SHAP interaction analysis were done to determine which residue positions and properties had highest contribution to the structural properties of the sequences. These studies led to developing trained and tested QSARs for predicting the structural properties of any modified BMP2-KEP sequence for the purpose of discovering novel 20-mer sequences with open-arm structures.

4-Aminopyridine Promotes BMP2 Expression and Accelerates Tibial Fracture Healing in Mice

BACKGROUND

Delayed bone healing is common in orthopaedic clinical care. Agents that alter cell function to enhance healing would change treatment paradigms. 4-aminopyridine (4-AP) is a U.S. Food and Drug Administration (FDA)-approved drug shown to improve walking in patients with chronic neurological disorders. We recently showed 4-AP's positive effects in the setting of nerve, wound, and even combined multi-tissue limb injury. Here, we directly investigated the effects of 4-AP on bone fracture healing, where differentiation of mesenchymal stem cells into osteoblasts is crucial.

METHODS

All animal experiments conformed to the protocols approved by the Institutional Animal Care and Use Committee at the University of Arizona and Pennsylvania State University. Ten-week-old C57BL/6J male mice (22 to 28 g), following midshaft tibial fracture, were assigned to 4-AP (1.6 mg/kg/day, intraperitoneal [IP]) and saline solution (0.1 mL/mouse/day, IP) treatment groups. Tibiae were harvested on day 21 for micro-computed tomography (CT), 3-point bending tests, and histomorphological analyses. 4-AP's effect on human bone marrow mesenchymal stem cell (hBMSC) and human osteoblast (hOB) cell viability, migration, and proliferation; collagen deposition; matrix mineralization; and bone-forming gene/protein expression analyses was assessed.

RESULTS

4-AP significantly upregulated BMP2 gene and protein expression and gene expression of RUNX2, OSX, BSP, OCN, and OPN in hBMSCs and hOBs. 4-AP significantly enhanced osteoblast migration and proliferation, collagen deposition, and matrix mineralization. Radiographic and micro-CT imaging confirmed 4-AP's benefit versus saline solution treatment in mouse tibial fracture healing (bone mineral density, 687.12 versus 488.29 mg hydroxyapatite/cm3 [p ≤ 0.0021]; bone volume/tissue volume, 0.87 versus 0.72 [p ≤ 0.05]; trabecular number, 7.50 versus 5.78/mm [p ≤ 0.05]; and trabecular thickness, 0.08 versus 0.06 mm [p ≤ 0.05]). Three-point bending tests demonstrated 4-AP's improvement of tibial fracture biomechanical properties versus saline solution (stiffness, 27.93 versus 14.30 N/mm; p ≤ 0.05). 4-AP also increased endogenous BMP2 expression and matrix components in healing callus.

CONCLUSIONS

4-AP increased the healing rate, biomechanical properties, and endogenous BMP2 expression of tibiae following fracture.

LEVEL OF EVIDENCE

Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Bioinstructive 3D-Printed Magnesium-Baghdadite Bioceramic Scaffolds for Bone Tissue Engineering

Current synthetic bioceramic scaffolds often lack bioinstructive ability for effective bone regeneration. We have selected magnesium-doped baghdadite (Mg-BAG) scaffolds, known for their promising osteoinductive and mechanical properties, as the base material and fabricated them using a liquid crystal display 3D printing technique. Building on this foundation, we have advanced the application of ion-assisted plasma polymerization (IAPP) technology, adapted for 3D structures, to develop homogeneous bioinstructive interfaces on these scaffolds for enhanced osteoinductive properties. The IAPP coatings formed under energetic ion bombardment maintained a strong attachment to the Mg-BAG scaffolds after 1 month of incubation at 37 °C in cell culture media. We provided evidence that such robustness of the interfaces is regulated by the coating's growth mechanism on a nanoscale, transitioning from initial island formation to a stable, smooth structure. The coatings enhanced the release of silicon ions from the scaffolds and significantly slowed the release of bone morphogenetic protein 2 (BMP2) over a period of 45 days. In the presence of lower soluble BMP2 concentrations, the biofunctionalized scaffolds demonstrated superior biocompatibility and osteoinductivity compared to those with physisorbed BMP2, as evidenced by sustained cell proliferation and elevated levels of osteogenic gene expression observed in human osteoblast-like cells (HOBs). This research highlights a key evolution of IAPP from traditional 2D substrates to more complex 3D structures and the excellent potential of IAPP bioceramic scaffolds as a next generation of cell-free constructs for bone regeneration applications and beyond.

Long-Term Success of Dental Implants in Atrophic Maxillae: A 3-Year Case Series Using Hydroxyapatite and L-PRF

Dental implants are essential for the prosthetic rehabilitation of edentulous patients, requiring adequate bone volume and density for osseointegration and load support. The posterior region of the maxilla, commonly deficient in bone quality and quantity, represents a clinical challenge. This case series reports an analysis involving 69 dental implants in the atrophic maxilla of nine patients. The procedures adopted combined alloplastic hydroxyapatite grafting and leukocyte platelet-rich fibrin (L-PRF) applied to the alveolar ridge and maxillary sinus lift. With an average follow up of three years after the installation of the prostheses, an implant success rate of 98.5% was observed, showing integration and functional stability. The strategy of combining hydroxyapatite with L-PRF proved to be effective in increasing bone volume and promoting osseointegration. These findings indicate that the technique and biomaterials are viable for rehabilitating atrophic maxillae in the posterior region, offering long-lasting clinical results and a high success rate.

In vivo validation of osteoinductivity and biocompatibility of BMP-2 enriched calcium phosphate cement alongside retrospective description of its clinical adverse events

PURPOSE

Although bone morphogenetic protein-2 (BMP-2) possesses potent osteoinductivity, there have been some concerns on the safety of BMP-2 and BMP-2-incorporated bone substitutes used for bone formation. On the other hand, BMP-2-loaded calcium phosphate cement (BMP-2@CPC) has been developed and used for bone regeneration in oral implantology. Therefore, this study aims to investigate this product's biocompatibility and clinical safety after being used in maxillofacial surgery.

MATERIALS AND METHODS

A rat model was employed to assess the osteoinduction and biocompatibility of BMP-2@CPC. Further, a retrospective investigation was carried out: 110 patients who received BMP-2@CPC treatment after their maxillofacial surgery were recruited to describe relative adverse events.

RESULTS

In vivo, BMP-2@CPC showed a significantly higher mean bone volume density and osteoblasts volume density (15 ± 2% and 3 ± 1%)than those of the CPC group (p < 0.05) after being implanted in the dorsal area of rats. Regarding biocompatibility, the mean fibrous tissue volume density was significantly lower in the BMP-2@CPC group (20 ± 5% compared to 31 ± 6%, p = 0.026). The retrospective clinical study showed that only five mild/moderate adverse events were identified in four patients based on the medical records of 110 patients, including swelling, bony mass, and wound dehiscence. This adverse event occurrence was not affected by gender, age, the dose of filled materials, and operations in the study (p > 0.05).

CONCLUSIONS

BMP-2-loaded CPC has osteoinductivity and more promising biocompatibility than pure CPC. However, its degradation is slower than CPC. The safety of BMP-2-loaded CPC with 0.5 or 1 mg BMP-2 is promising in oral maxillofacial surgery.

CLINICAL IMPLICATIONS

This study confirmed the promising safety of this BMP-2 incorporated CPC used in dental clinical practice, which can promote its reassuring application for dental implant placement in bone insufficient areas.

Biomimetic Tissue Engineering Strategies for Craniofacial Applications

Biomimetics is the science of imitating nature's designs and processes to create innovative solutions for various fields, including dentistry and craniofacial reconstruction. In these areas, biomimetics involves drawing inspiration from living organisms/systems to develop new materials, techniques, and devices that closely resemble natural tissue structures and enhance functionality. This field has successfully demonstrated its potential to revolutionize craniofacial procedures, significantly improving patient outcomes. In dentistry, biomimetics offers exciting possibilities for the advancement of new dental materials, restorative techniques, and regenerative potential. By analyzing the structure/composition of natural teeth and the surrounding tissues, researchers have developed restorative materials that mimic the properties of teeth, as well as regenerative techniques that might assist in repairing enamel, dentin, pulp, cementum, periodontal ligament, and bone. In craniofacial reconstruction, biomimetics plays a vital role in developing innovative solutions for facial trauma, congenital defects, and various conditions affecting the maxillofacial region. By studying the intricate composition and mechanical properties of the skull and facial bones, clinicians and engineers have been able to replicate natural structures leveraging computer-aided design and manufacturing (CAD/CAM) and 3D printing. This has allowed for the creation of patient-specific scaffolds, implants, and prostheses that accurately fit a patient's anatomy. This review highlights the current evidence on the application of biomimetics in the fields of dentistry and craniofacial reconstruction.

Efficacy of Demineralized Bone Matrix for Revision Alveolar Bone Grafting in Patients Previously Treated with Bone Morphogenetic Protein 2 (BMP-2)

OBJECTIVE

This study investigates the effectiveness of demineralized bone matrix (DBX) to close alveolar clefts in patients previously treated with bone morphogenic protein-2 (BMP-2) who remained with bone nonunion.

DESIGN

This is an IRB-approved retrospective, single-center study.

SETTING

This study was conducted at a tertiary academic center.

PATIENTS/PARTICIPANTS

We searched for all surgical encounters with the Current Procedural Terminology (CPT) code 42210 from the years 2013-2019. Included patients were diagnosed with cleft alveolus, previous BMP-2 exposure and required revision bone grafting during mixed dentition for persistent alveolar defects.

INTERVENTIONS

17 patients underwent revision alveolar bone grafting (ABG) with either DBX (n = 10) or autograft (n = 7) to repair persistent bony cleft.

MAIN OUTCOME MEASURE(S)

The primary study outcome measured was alveolar bone graft revision failure described as continued alveolar nonunion.

RESULTS

The median age at revision ABG was 13.1 ± 3.3 years, with a mean follow-up time of 4.9 years (1.1-9.2 years). Patients were 53% male, 47% had a unilateral cleft lip and alveolus. 58.8% of patients were treated with DBX in the cleft, 41.2% treated with autograft from iliac crest. Overall, 11.8% (n = 2) of all revisions failed, requiring a second revision. The average time to reoperation was 2.06 years, and both were re-grafted with autograft. There was no statistically significant difference between the type of bone graft source used and the failure rate obtained (P = .1544).

CONCLUSIONS

DBX and autologous iliac crest bone grafts achieve similar alveolar union rates during revision ABG in patients treated with previous BMP-2 to the alveolar cleft.

Sinus floor augmentation using mineralized freeze-dried bone allograft combined with recombinant human bone morphogenetic protein-2 (rhBMP-2): A long-term retrospective study

Background/purpose

The combination of recombinant human bone morphogenetic protein-2 (rhBMP-2) with a carrier material has not been extensively studied. This study aimed to evaluate the clinical, radiological, and histomorphometric outcomes of sinus floor augmentation using a 3:7 mixture of cancellous and cortical freeze-dried bone allografts (mixed AG) combined with rhBMP-2.

Materials and methods

Mixed AG was used for sinus floor augmentation in a total of 21 patients with a residual alveolar bone height <5 mm. Among the total 47 sites, augmentation with and without rhBMP-2 was performed in 26 and 21 sites, respectively. Radiographic parameters were assessed using cone-beam computed tomography. After a six-month healing period, core biopsies were harvested for histomorphometric analysis.

Results

The bone gain after healing was 13.36 ± 3.9 mm and 12.07 ± 3.8 mm in the mixed AG alone and mixed AG with rhBMP-2 groups, respectively. The survival rate of implants in both groups was 100% during the follow-up period. The proportion of newly formed bone was 24.6 ± 10.2% and 39.7 ± 18.3% in the mixed AG alone and mixed AG with rhBMP-2 groups, respectively (P < 0.05). Moreover, the percentage of residual graft material was 21.0 ± 12.2% and 9.6 ± 10.0% in the mixed AG alone and mixed AG with rhBMP-2 groups, respectively (P < 0.05).

Conclusion

Mixed AG combined with rhBMP-2 could be a suitable material for sinus floor augmentation. This combination may reduce the treatment time and improve the predictability of implant placement.

Endothelial SMAD1/5 signaling couples angiogenesis to osteogenesis in juvenile bone

Skeletal development depends on coordinated angiogenesis and osteogenesis. Bone morphogenetic proteins direct bone formation in part by activating SMAD1/5 signaling in osteoblasts. However, the role of SMAD1/5 in skeletal endothelium is unknown. Here, we found that endothelial cell-conditional SMAD1/5 depletion in juvenile mice caused metaphyseal and diaphyseal hypervascularity, resulting in altered trabecular and cortical bone formation. SMAD1/5 depletion induced excessive sprouting and disrupting the morphology of the metaphyseal vessels, with impaired anastomotic loop formation at the chondro-osseous junction. Endothelial SMAD1/5 depletion impaired growth plate resorption and, upon long-term depletion, abrogated osteoprogenitor recruitment to the primary spongiosa. Finally, in the diaphysis, endothelial SMAD1/5 activity was necessary to maintain the sinusoidal phenotype, with SMAD1/5 depletion inducing formation of large vascular loops and elevated vascular permeability. Together, endothelial SMAD1/5 activity sustains skeletal vascular morphogenesis and function and coordinates growth plate remodeling and osteoprogenitor recruitment dynamics in juvenile mouse bone.

Trends of regenerative tissue engineering for oral and maxillofacial reconstruction in veterinary medicine

Oral and maxillofacial (OMF) defects are not limited to humans and are often encountered in other species. Reconstructing significant tissue defects requires an excellent strategy for efficient and cost-effective treatment. In this regard, tissue engineering comprising stem cells, scaffolds, and signaling molecules is emerging as an innovative approach to treating OMF defects in veterinary patients. This review presents a comprehensive overview of OMF defects and tissue engineering principles to establish proper treatment and achieve both hard and soft tissue regeneration in veterinary practice. Moreover, bench-to-bedside future opportunities and challenges of tissue engineering usage are also addressed in this literature review.

The Use of Functional Biomaterials in Aesthetic and Functional Restoration in Orbital Surgery

The integration of functional biomaterials in oculoplastic and orbital surgery is a pivotal area where material science and clinical practice converge. This review, encompassing primary research from 2015 to 2023, delves into the use of biomaterials in two key areas: the reconstruction of orbital floor fractures and the development of implants and prostheses for anophthalmic sockets post-eye removal. The discussion begins with an analysis of orbital floor injuries, including their pathophysiology and treatment modalities. It is noted that titanium mesh remains the gold standard for orbital floor repair due to its effectiveness. The review then examines the array of materials used for orbital implants and prostheses, highlighting the dependence on surgeon preference and experience, as there are currently no definitive guidelines. While recent innovations in biomaterials show promise, the review underscores the need for more clinical data before these new materials can be widely adopted in clinical settings. The review advocates for an interdisciplinary approach in orbital surgery, emphasizing patient-centered care and the potential of biomaterials to significantly enhance patient outcomes.

NIR light-facilitated bone tissue engineering

In the last decades, near-infrared (NIR) light has attracted considerable attention due to its unique properties and numerous potential applications in bioimaging and disease treatment. Bone tissue engineering for bone regeneration with the help of biomaterials is currently an effective means of treating bone defects. As a controlled light source with deeper tissue penetration, NIR light can provide real-time feedback of key information on bone regeneration in vivo utilizing fluorescence imaging and be used for bone disease treatment. This review provides a comprehensive overview of NIR light-facilitated bone tissue engineering, from the introduction of NIR probes as well as NIR light-responsive materials, and the visualization of bone regeneration to the treatment of bone-related diseases. Furthermore, the existing challenges and future development directions of NIR light-based bone tissue engineering are also discussed. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement.

Bone Tissue Engineering (BTE) of the Craniofacial Skeleton, Part II: Translational Potential of 3D-Printed Scaffolds for Defect Repair

Computer-aided design/computer-aided manufacturing and 3-dimensional (3D) printing techniques have revolutionized the approach to bone tissue engineering for the repair of craniomaxillofacial skeletal defects. Ample research has been performed to gain a fundamental understanding of the optimal 3D-printed scaffold design and composition to facilitate appropriate bone formation and healing. Benchtop and preclinical, small animal model testing of 3D-printed bioactive ceramic scaffolds augmented with pharmacological/biological agents have yielded promising results given their potential combined osteogenic and osteoinductive capacity. However, other factors must be evaluated before newly developed constructs may be considered analogous alternatives to the "gold standard" autologous graft for defect repair. More specifically, the 3D-printed bioactive ceramic scaffold's long-term safety profile, biocompatibility, and resorption kinetics must be studied. The ultimate goal is to successfully regenerate bone that is comparable in volume, density, histologic composition, and mechanical strength to that of native bone. In vivo studies of these newly developed bone tissue engineering in translational animal models continue to make strides toward addressing regulatory and clinically relevant topics. These include the use of skeletally immature animal models to address the challenges posed by craniomaxillofacial defect repair in pediatric patients. This manuscript reviews the most recent preclinical animal studies seeking to assess 3D-printed ceramic scaffolds for improved repair of critical-sized craniofacial bony defects.

Hydrogel Microparticles for Bone Regeneration

Hydrogel microparticles (HMPs) stand out as promising entities in the realm of bone tissue regeneration, primarily due to their versatile capabilities in delivering cells and bioactive molecules/drugs. Their significance is underscored by distinct attributes such as injectability, biodegradability, high porosity, and mechanical tunability. These characteristics play a pivotal role in fostering vasculature formation, facilitating mineral deposition, and contributing to the overall regeneration of bone tissue. Fabricated through diverse techniques (batch emulsion, microfluidics, lithography, and electrohydrodynamic spraying), HMPs exhibit multifunctionality, serving as vehicles for drug and cell delivery, providing structural scaffolding, and functioning as bioinks for advanced 3D-printing applications. Distinguishing themselves from other scaffolds like bulk hydrogels, cryogels, foams, meshes, and fibers, HMPs provide a higher surface-area-to-volume ratio, promoting improved interactions with the surrounding tissues and facilitating the efficient delivery of cells and bioactive molecules. Notably, their minimally invasive injectability and modular properties, offering various designs and configurations, contribute to their attractiveness for biomedical applications. This comprehensive review aims to delve into the progressive advancements in HMPs, specifically for bone regeneration. The exploration encompasses synthesis and functionalization techniques, providing an understanding of their diverse applications, as documented in the existing literature. The overarching goal is to shed light on the advantages and potential of HMPs within the field of engineering bone tissue.

Bioactive Scaffolds as a Promising Alternative for Enhancing Critical-Size Bone Defect Regeneration in the Craniomaxillofacial Region

Reconstruction of critical-size bone defects (CSDs) in the craniomaxillofacial (CMF) region remains challenging. Scaffold-based bone-engineered constructs have been proposed as an alternative to the classical treatments made with autografts and allografts. Scaffolds, a key component of engineered constructs, have been traditionally viewed as biologically passive temporary replacements of deficient bone lacking intrinsic cues to promote osteogenesis. Nowadays, scaffolds are functionalized, giving rise to bioactive scaffolds promoting bone regeneration more effectively than conventional counterparts. This review focuses on the three approaches most used to bioactivate scaffolds: (1) conferring microarchitectural designs or surface nanotopography; (2) loading bioactive molecules; and (3) seeding stem cells on scaffolds, providing relevant examples of in vivo (preclinical and clinical) studies where these methods are employed to enhance CSDs healing in the CMF region. From these, adding bioactive molecules (specifically bone morphogenetic proteins or BMPs) to scaffolds has been the most explored to bioactivate scaffolds. Nevertheless, the downsides of grafting BMP-loaded scaffolds in patients have limited its successful translation into clinics. Despite these drawbacks, scaffolds containing safer, cheaper, and more effective bioactive molecules, combined with stem cells and topographical cues, remain a promising alternative for clinical use to treat CSDs in the CMF complex replacing autografts and allografts.

Bone Graft Substitutes and Enhancement in Craniomaxillofacial Surgery

Critical-sized bone defects are a reconstructive challenge, particularly in the craniomaxillofacial (CMF) skeleton. The "gold standard" of autologous bone grafting has been the work horse of reconstruction in both congenital and acquired defects of CMF skeleton. Autologous bone has the proper balance of the protein (or organic) matrix and mineral components with no immune response. Organic and mineral adjuncts exist that offer varying degrees of osteogenic, osteoconductive, osteoinductive, and osteostimulative properties needed for treatment of critical-sized defects. In this review, we discuss the various mostly organic and mostly mineral bone graft substitutes available for autologous bone grafting. Primarily organic bone graft substitutes/enhancers, including bone morphogenic protein, platelet-rich plasma, and other growth factors, have been utilized to support de novo bone growth in setting of critical-sized bone defects. Primarily mineral options, including various calcium salt formulation (calcium sulfate/phosphate/apatite) and bioactive glasses have been long utilized for their similar composition to bone. Yet, a bone graft substitute that can supplant autologous bone grafting is still elusive. However, case-specific utilization of bone graft substitutes offers a wider array of reconstructive options.

Current Status of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) in Maxillofacial Surgery: Should It Be Continued?

Recombinant human bone morphogenetic protein-2 (rhBMP-2) has shown potential in maxillofacial surgery owing to its osteoinductive properties. However, concerns about its safety and high cost have limited its widespread use. This review presents the status of rhBMP-2 use in maxillofacial surgery, focusing on its clinical application, efficacy, safety, and limitations. Studies have demonstrated rhBMP-2's potential to reduce donor site morbidity and increase bone height in sinus and ridge augmentation; however, it may not outperform autogenous bone grafts. In medication-related osteonecrosis of the jaw treatment, rhBMP-2 has been applied adjunctively with promising results, although its long-term safety requires further investigation. However, in maxillofacial trauma, its application is limited to the restoration of large defects. Safety concerns include postoperative edema and the theoretical risk of carcinogenesis. Although postoperative edema is manageable, the link between rhBMP-2 and cancer remains unclear. The limitations include the lack of an ideal carrier, the high cost of rhBMP-2, and the absence of an optimal dosing regimen. In conclusion, rhBMP-2 is a promising graft material for maxillofacial surgery. However, it has not yet become the gold standard owing to safety and cost concerns. Further research is required to establish long-term safety, optimize dosing, and develop better carriers.

Revolutionizing bone regeneration: advanced biomaterials for healing compromised bone defects

In this review, we explore the application of novel biomaterial-based therapies specifically targeted towards craniofacial bone defects. The repair and regeneration of critical sized bone defects in the craniofacial region requires the use of bioactive materials to stabilize and expedite the healing process. However, the existing clinical approaches face challenges in effectively treating complex craniofacial bone defects, including issues such as oxidative stress, inflammation, and soft tissue loss. Given that a significant portion of individuals affected by traumatic bone defects in the craniofacial area belong to the aging population, there is an urgent need for innovative biomaterials to address the declining rate of new bone formation associated with age-related changes in the skeletal system. This article emphasizes the importance of semiconductor industry-derived materials as a potential solution to combat oxidative stress and address the challenges associated with aging bone. Furthermore, we discuss various material and autologous treatment approaches, as well as in vitro and in vivo models used to investigate new therapeutic strategies in the context of craniofacial bone repair. By focusing on these aspects, we aim to shed light on the potential of advanced biomaterials to overcome the limitations of current treatments and pave the way for more effective and efficient therapeutic interventions for craniofacial bone defects.

Recent development in multizonal scaffolds for osteochondral regeneration

Osteochondral (OC) repair is an extremely challenging topic due to the complex biphasic structure and poor intrinsic regenerative capability of natural osteochondral tissue. In contrast to the current surgical approaches which yield only short-term relief of symptoms, tissue engineering strategy has been shown more promising outcomes in treating OC defects since its emergence in the 1990s. In particular, the use of multizonal scaffolds (MZSs) that mimic the gradient transitions, from cartilage surface to the subchondral bone with either continuous or discontinuous compositions, structures, and properties of natural OC tissue, has been gaining momentum in recent years. Scrutinizing the latest developments in the field, this review offers a comprehensive summary of recent advances, current hurdles, and future perspectives of OC repair, particularly the use of MZSs including bilayered, trilayered, multilayered, and gradient scaffolds, by bringing together onerous demands of architecture designs, material selections, manufacturing techniques as well as the choices of growth factors and cells, each of which possesses its unique challenges and opportunities.

Three-Dimensional Printing Bioceramic Scaffolds Using Direct-Ink-Writing for Craniomaxillofacial Bone Regeneration

Defects characterized as large osseous voids in bone, in certain circumstances, are difficult to treat, requiring extensive treatments which lead to an increased financial burden, pain, and prolonged hospital stays. Grafts exist to aid in bone tissue regeneration (BTR), among which ceramic-based grafts have become increasingly popular due to their biocompatibility and resorbability. BTR using bioceramic materials such as β-tricalcium phosphate has seen tremendous progress and has been extensively used in the fabrication of biomimetic scaffolds through the three-dimensional printing (3DP) workflow. 3DP has hence revolutionized BTR by offering unparalleled potential for the creation of complex, patient, and anatomic location-specific structures. More importantly, it has enabled the production of biomimetic scaffolds with porous structures that mimic the natural extracellular matrix while allowing for cell growth-a critical factor in determining the overall success of the BTR modality. While the concept of 3DP bioceramic bone tissue scaffolds for human applications is nascent, numerous studies have highlighted its potential in restoring both form and function of critically sized defects in a wide variety of translational models. In this review, we summarize these recent advancements and present a review of the engineering principles and methodologies that are vital for using 3DP technology for craniomaxillofacial reconstructive applications. Moreover, we highlight future advances in the field of dynamic 3D printed constructs via shape-memory effect, and comment on pharmacological manipulation and bioactive molecules required to treat a wider range of boney defects.

Application of rhBMP in spinal fusion surgery: any correlation of cancer incidence? A systematic review and meta-analysis

PURPOSE

Safety concerns regarding the application of bone morphogenetic proteins (BMPs) have been highlighted in recent years. It is noted that both BMP and their receptors being identified as a trigger for cancer growth. Here, we aimed to determine the safety and efficacy of BMP for spinal fusion surgery.

METHODS

We conducted this systematic review on topics of spinal fusion surgery with rhBMP application from three database (PubMed, EuropePMC, and Clinicaltrials.gov) with MeSH phrases such as "rh-BMP," "rhBMP," "spine surgery," "spinal arthrodesis," and "spinal fusion" were searched (using the Boolean operators "and" and "or"). Our research includes all articles, as long as published in English language. In the face of disagreement between the two reviewers, we discussed it together until all authors reached a consensus. The primary key outcome of our study is the incidence of cancer following rhBMP implantation.

RESULTS

Our study included a total of 8 unique studies (n = 37,682). The mean follow-up varies among all studies, with the longest follow-up is 66 months. Our meta-analysis showed that exposure to rhBMP in spinal surgery did increase the risk of cancers (RR 1.85, 95%CI [1.05, 3.24], p = 0.03).

CONCLUSIONS

Our study found that rhBMP was not associated with the increased risk of cancer incidence within the rhBMP cohort. Still, we did face several limitations, in which further studies are needed to confirm the result of our meta-analysis.

Advances in In Vitro and In Vivo Bioreactor-Based Bone Generation for Craniofacial Tissue Engineering

Craniofacial reconstruction requires robust bone of specified geometry for the repair to be both functional and aesthetic. While native bone from elsewhere in the body can be harvested, shaped, and implanted within a defect, using either an in vitro or in vivo bioreactors eliminates donor site morbidity while increasing the customizability of the generated tissue. In vitro bioreactors utilize cells harvested from the patient, a scaffold, and a device to increase mass transfer of nutrients, oxygen, and waste, allowing for generation of larger viable tissues. In vivo bioreactors utilize the patient's own body as a source of cells and of nutrient transfer and involve the implantation of a scaffold with or without growth factors adjacent to vasculature, followed by the eventual transfer of vascularized, mineralized tissue to the defect site. Several different models of in vitro bioreactors exist, and several different implantation sites have been successfully utilized for in vivo tissue generation and defect repair in humans. In this review, we discuss the specifics of each bioreactor strategy, as well as the advantages and disadvantages of each and the future directions for the engineering of bony tissues for craniofacial defect repair.

PDGF inhibits BMP2-induced bone healing

Bone regeneration depends on a pool of bone/cartilage stem/progenitor cells and signaling mechanisms regulating their differentiation. Using in vitro approach, we have shown that PDGF signaling through PDGFRβ inhibits BMP2-induced osteogenesis, and significantly attenuates expression of BMP2 target genes. We evaluated outcomes of treatment with two anabolic agents, PDGF and BMP2 using different bone healing models. Targeted deletion of PDGFRβ in αSMA osteoprogenitors, led to increased callus bone mass, resulting in improved biomechanical properties of fractures. In critical size bone defects BMP2 treatment increased proportion of osteoprogenitors, while the combined treatment of PDGF BB with BMP2 decreased progenitor number at the injury site. BMP2 treatment induced significant bone formation and increased number of osteoblasts, while in contrast combined treatment with PDGF BB decreased osteoblast numbers. This is in vivo study showing that PDGF inhibits BMP2-induced osteogenesis, but inhibiting PDGF signaling early in healing process does not improve BMP2-induced bone healing.

Endothelial SMAD1/5 signaling couples angiogenesis to osteogenesis during long bone growth

Skeletal development depends on coordinated angiogenesis and osteogenesis. Bone morphogenetic proteins direct bone development by activating SMAD1/5 signaling in osteoblasts. However, the role of SMAD1/5 in skeletal endothelium is unknown. Here, we found that endothelial cell-conditional SMAD1/5 depletion in juvenile mice caused metaphyseal and diaphyseal hypervascularity, resulting in altered cancellous and cortical bone formation. SMAD1/5 depletion induced excessive sprouting, disrupting the columnar structure of the metaphyseal vessels and impaired anastomotic loop morphogenesis at the chondro-osseous junction. Endothelial SMAD1/5 depletion impaired growth plate resorption and, upon long term depletion, abrogated osteoprogenitor recruitment to the primary spongiosa. Finally, in the diaphysis, endothelial SMAD1/5 activity was necessary to maintain the sinusoidal phenotype, with SMAD1/5 depletion inducing formation of large vascular loops, featuring elevated endomucin expression, ectopic tip cell formation, and hyperpermeability. Together, endothelial SMAD1/5 activity sustains skeletal vascular morphogenesis and function and coordinates growth plate remodeling and osteoprogenitor recruitment dynamics during bone growth.

[Advantages and disadvantages of bone graft materials activated by BMP-2 and constructs carrying its gene]

In the review gene constructs and proteins used to impart osteoinductive properties to bone graft materials are compared. On the basis of clinical and experimental data the experience and prospects of their application in maxillofacial surgery and dentistry are described. Information about complications associated with the use of bone morphogenetic protein-2 (BMP-2) and vectors carrying its gene is provided.

Bioactive Porous Particles as Biological and Physical Stimuli for Bone Regeneration

Even though bony defects can be recovered to their original condition with full functionality, critical-sized bone injuries continue to be a challenge in clinical fields due to deficiencies in the scaffolding matrix and growth factors at the injury region. In this study, we prepared bone morphogenetic protein-2 (BMP-2)-loaded porous particles as a bioactive bone graft for accelerated bone regeneration. The porous particles with unique leaf-stacked morphology (LSS particles) were fabricated by a simple cooling procedure of hot polycaprolactone (PCL) solution. The unique leaf-stacked structure in the LSS particles provided a large surface area and complex release path for the sufficient immobilization of BMP-2 and sustained release of BMP-2 for 26 days. The LSS was also recognized as a topographical cue for cell adhesion and differentiation. In in vitro cell culture and in vivo animal study using a canine mandible defect model, BMP-2-immobilized LSS particles provided a favorable environment for osteogenic differentiation of stem cells and bone regeneration. In vitro study suggests a dual stimulus of bone mineral-like (leaf-stacked) structure (a physical cue) and continuously supplied BMP-2 (a biological cue) to be the cause of this improved healing outcome. Thus, LSS particles containing BMP-2 can be a promising bioactive grafting material for effective new bone formation.

CTR9 drives osteochondral lineage differentiation of human mesenchymal stem cells via epigenetic regulation of BMP-2 signaling

Cell fate determination of human mesenchymal stem/stromal cells (hMSCs) is precisely regulated by lineage-specific transcription factors and epigenetic enzymes. We found that CTR9, a key scaffold subunit of polymerase-associated factor complex (PAFc), selectively regulates hMSC differentiation to osteoblasts and chondrocytes, but not to adipocytes. An in vivo ectopic osteogenesis assay confirmed the essentiality of CTR9 in hMSC-derived bone formation. CTR9 counteracts the activity of Enhancer Of Zeste 2 (EZH2), the epigenetic enzyme that deposits H3K27me3, in hMSCs. Accordingly, CTR9 knockdown (KD) hMSCs gain H3K27me3 mark, and the osteogenic differentiation defects of CTR9 KD hMSCs can be partially rescued by treatment with EZH2 inhibitors. Transcriptome analyses identified bone morphology protein-2 (BMP-2) as a downstream effector of CTR9. BMP-2 secretion, membrane anchorage, and the BMP-SMAD pathway were impaired in CTR9 KD MSCs, and the effects were rescued by BMP-2 supplementation. This study uncovers an epigenetic mechanism engaging the CTR9-H3K27me3-BMP-2 axis to regulate the osteochondral lineage differentiation of hMSCs.

Carrier systems for bone morphogenetic proteins: An overview of biomaterials used for dentoalveolar and maxillofacial bone regeneration

Different types of biomaterials have been used to fabricate carriers to deliver bone morphogenetic proteins (BMPs) in both dentoalveolar and maxillofacial bone regeneration procedures. Despite that absorbable collagen sponge (ACS) is considered the gold standard for BMP delivery, there is still some concerns regarding its use mainly due to its poor mechanical properties. To overcome this, novel systems are being developed, however, due to the wide variety of biomaterial combination, the heterogeneous assessment of newly formed tissue, and the intended clinical applications, there is still no consensus regarding which is more efficient in a particular clinical scenario. The combination of two or more biomaterials in different topological configurations has allowed specific controlled-release patterns for BMPs, improving their biological and mechanical properties compared with classical single-material carriers. However, more basic research is needed. Since the BMPs can be used in multiple clinical scenarios having different biological and mechanical needs, novel carriers should be developed in a context-specific manner. Thus, the purpose of this review is to gather current knowledge about biomaterials used to fabricate delivery systems for BMPs in both dentoalveolar and maxillofacial contexts. Aspects related with the biological, physical and mechanical characteristics of each biomaterial are also presented and discussed.

•

Strategies for bone formation and regeneration are a major concern in dentistry.

•

Topical delivery of bone morphogenetic proteins (BMPs) allows rapid bone formation.

•

BMPs requires proper carrier system to allow controlled and sustained release.

•

Carrier should also fulfill mechanical requirements of bone defect sites.

•

By using complex composites, it would be possible to develop new carriers for BMPs.

The Osteoinductive Potential of Partially Demineralized Bone Matrix and the Possibility of Its Use in Clinical Practice

Today autografts are considered to be an optimal material for bone grafting. However, the collection of material and its clinical use is associated with several serious drawbacks, and therefore, in reconstructive surgery, a search for alternative treatment approaches is being conducted. A bone transplant from another person (allo-osteoplasty) is the most natural and logical option for replacing an autobone. Since 1965, allogeneic implants of a partially demineralized bone matrix combining osteoinductive and osteoconductive action have been used in clinical practice. However, the clinical results of the use of this material turned out to be ambiguous, which is due, first of all, to the significant variability of the osteoplastic potential of its various samples. For this reason, in clinical practice, sometimes preference is given to samples of non-demineralized allobone, which retain its structure longer. In this paper, we consider factors affecting the osteoinductive activity of a partially demineralized bone matrix, related both to the technological issues of its preparation and to the clinical conditions of use. Issues of the possible improvement of this material were discussed with a view to its further use in medical practice.

A Retrospective Study on Mandibular Reconstruction Following Excision of Canine Acanthomatous Ameloblastoma

The successful excision of a locally invasive tumor such as canine acanthomatous ameloblastoma (CAA) typically results in a mandibular contour-derforming, critical-size defect that alters the jaw kinematics, and may affect the patient's quality of life. In this case series, we describe our experience using the regenerative approach of a titanium locking plate and compression resistant matrix infused with rhBMP-2 for the immediate or delayed reconstruction following mandibulectomy for the excision of mandibular CAA in 11 dogs. Surgical planning included computed tomography (CT), with and without contrast, in all cases, and 3D-printed models in four cases. Tumor-free surgical margins were achieved in all dogs. Clinical and diagnostic imaging follow-up (mean, 23.1 months) were performed in-person (11 cases) and with CT/cone-beam computed tomography in most cases, with standard radiography (3 cases) and telemedicine being utilized in 5 cases. At 2 weeks postoperatively, hard tissue was palpable at the defect. Follow-up imaging at 1 month postoperatively revealed evidence of bridging new bone with a heterogeneous appearance, that remodeled over 3–6 months to bone of a similar size, shape and trabecular pattern as native bone. Histological evaluation of regenerated bone was available in two cases, and was supportive of our clinical and imaging findings of normal remodeled bone. Clinically, all dogs returned to a normal lifestyle, rapidly resumed eating and drinking, and exhibited normal occlusion. Complications included wound dehiscence in one dog and self-limiting exuberant bone formation in two dogs. Tumor regrowth, failure of the implant or fracture of the regenerated bone were not observed. We conclude that the mandibular reconstruction using a regenerative approach is safe, feasible, and results in restoration of mandibular contour in dogs following segmental and bilateral rostral mandibulectomy for benign but invasive oral tumors such as CAA.

Effects of Channels and Micropores in Honeycomb Scaffolds on the Reconstruction of Segmental Bone Defects

The reconstruction of critical-sized segmental bone defects is a key challenge in orthopedics because of its intractability despite technological advancements. To overcome this challenge, scaffolds that promote rapid bone ingrowth and subsequent bone replacement are necessary. In this study, we fabricated three types of carbonate apatite honeycomb (HC) scaffolds with uniaxial channels bridging the stumps of a host bone. These HC scaffolds possessed different channel and micropore volumes. The HC scaffolds were implanted into the defects of rabbit ulnar shafts to evaluate the effects of channels and micropores on bone reconstruction. Four weeks postoperatively, the HC scaffolds with a larger channel volume promoted bone ingrowth compared to that with a larger micropore volume. In contrast, 12 weeks postoperatively, the HC scaffolds with a larger volume of the micropores rather than the channels promoted the scaffold resorption by osteoclasts and bone formation. Thus, the channels affected bone ingrowth in the early stage, and micropores affected scaffold resorption and bone formation in the middle stage. Furthermore, 12 weeks postoperatively, the HC scaffolds with large volumes of both channels and micropores formed a significantly larger amount of new bone than that attained using HC scaffolds with either large volume of channels or micropores, thereby bridging the host bone stumps. The findings of this study provide guidance for designing the pore structure of scaffolds.

Mineralization in a Critical Size Bone-Gap in Sheep Tibia Improved by a Chitosan-Calcium Phosphate-Based Composite as Compared to Predicate Device

Deacetylated chitin derivatives have been widely studied for tissue engineering purposes. This study aimed to compare the efficacy of an injectable product containing a 50% deacetylated chitin derivative (BoneReg-Inject™) and an existing product (chronOS Inject^®) serving as a predicate device. A sheep model with a critical size drill hole in the tibial plateau was used. Holes of 8 mm diameter and 30 mm length were drilled bilaterally into the proximal area of the tibia and BoneReg-Inject™ or chronOS Inject^® were injected into the right leg holes. Comparison of resorption and bone formation in vivo was made by X-ray micro-CT and histological evaluation after a live phase of 12 weeks. Long-term effects of BoneReg-Inject™ were studied using a 13-month live period. Significant differences were observed in (1) amount of new bone within implant (p < 0.001), higher in BoneReg-Inject^TM, (2) signs of cartilage tissue (p = 0.003), more pronounced in BoneReg-Inject^TM, and (3) signs of fibrous tissue (p < 0.001), less pronounced in BoneReg-Inject^TM. Mineral content at 13 months postoperative was significantly higher than at 12 weeks (p < 0.001 and p < 0.05, for implant core and rim, respectively). The data demonstrate the potential of deacetylated chitin derivatives to stimulate bone formation.

Guided bone regeneration with and without rhBMP-2: 17-year results of a randomized controlled clinical trial

Objectives

To assess long‐term outcomes of implants placed in conjunction with guided bone regeneration (GBR) with or without recombinant human bone morphogenetic protein‐2 (rhBMP‐2).

Materials and Methods

Eleven patients with at least two lateral bone defects (split‐mouth design) received a total of 34 implants. The defects were treated with a xenogenic bone substitute with (test) or without (control) rhBMP‐2 and covered with a collagen membrane. Eight patients could be reexamined after at least 17 years. Wilcoxon signed‐rank tests were performed to assess differences between test and control groups.

Results

The implant survival rate was 100% for all test and control sites. Mean marginal bone levels were 2.51 mm (SD ±1.64) (mesial test), 1.83 mm (SD ±0.93) (mesial control) (p = .055), 2.36 mm (SD ±1.70) (distal test), and 2.13 mm (SD ±0.84) (distal control) (p = 1.000). Compared with the mean values at baseline, a mean bone loss of 1.16 mm (SD ±1.60) (test) and 0.70 mm (SD ±1.02) (control) was found. The mean buccal bone gain after 17 years was 5.38 mm (test) and 3.14 mm (control) based on the comparison between the measurements at the cone beam CT after 17 years and the data from the intraoperative measurements at baseline. Further, mean values for (i) bone thickness ranged from 1.36 to 3.09 mm (test) and 1.18 to 3.39 mm (control) and for (ii) mucosal thickness of 1.24 mm (test) and 1.26 mm (control).

Conclusion

Implants placed in conjunction with GBR applying a xenogenic bone substitute and a collagen membrane with and without the addition of rhBMP‐2 demonstrate excellent clinical and radiographic results after at least 17 years.

A Clinical Study on the Effect of Different Ratios of Recombinant Human Bone Morphogenetic Protein-2 Compound to Autogenous Bone on Cervical Interbody Fusion Based on Smart Healthcare

With an increasing elderly population worldwide, the incidence of spine degenerative diseases with neck and shoulder pain as the main symptom is rising obviously, which has now become one of the important and difficult problems in sociomedical science. This study was to explore the effects of different ratios of recombinant human bone morphogenetic protein-2 (rhBMP-2) compound to the autogenous bone on cervical interbody fusion. 90 cervical degeneration patients with the need of surgical treatment admitted to our hospital from January 2019 to January 2020 were selected as the research objects and equally divided into group A, group B, and group C according to the order of admission, with 30 cases in each group and the ratios of rhBMP-2 compound to autogenous bone being 2 : 1, 1 : 1, and 1 : 2 respectively, and standard anterior cervical diskectomy and fusion (ACDF) treatment was performed to all patients to compare their surgery-related indexes, the Japanese Orthopaedic Association (JOA) score, the visual analog scale (VAS) score, the effect of cervical interbody fusion, and the postoperative complication rate (CR). Compared with group A and group C, group B achieved the significantly better surgery-related indexes (P < 0.05), significantly higher postoperative JOA scores (P < 0.05), significantly lower postoperative neck and upper limb VAS scores (P < 0.05), significantly better effect of cervical interbody fusion (P < 0.05), and significantly lower postoperative CR (P < 0.05). 1 : 1 is the best ratio of rhBMP-2 compound to the autogenous bone, for it can optimize patients' perioperative indexes, reduce the postoperative pain, lower the possibility of complications, and improve the effect of cervical interbody fusion, which should be promoted and applied in practice.

Ectopic Laryngeal Ossification after Bone Morphogenetic Protein-2

We report two cases of ectopic bone formation in the head and neck following treatment with recombinant human bone morphogenetic protein-2 (rhBMP-2). Surgical pathologic data, laryngoscopy imaging, CT imaging, and patient medical history were obtained. First, we report osseous metaplasia in the vocal fold in a 67-year-old male following mandibular dental implants with rhBMP-2; second, a case of severe bony overgrowth of the larynx and fusion to the anterior cervical spine (ACS) in a 73-year-old male following multiple anterior cervical discectomies and fusions with rhBMP-2. Ectopic bone formation following rhBMP-2 has been previously reported. Adverse events like local swelling and edema leading to dysphagia and even airway obstruction after cervical spine application of rhBMP-2 have also been widely reported. Due to the uncommon nature of abnormal bony growth in soft tissue areas of the head and neck and the previously documented adverse effects of rhBMP-2 use, especially in the cervical spine, we consider the two unusual case presentations of ectopic bony formation highly likely to be linked with rhBMP-2. We urge awareness of the adverse effects caused by rhBMP-2, and urge caution in dosing.

Comparison of Bone Regeneration in Different Forms of Bovine Bone Scaffolds with Recombinant Human Bone Morphogenetic Protein-2

The aim of this study was to compare the bone regeneration ability of particle and block bones, acting as bone scaffolds, with recombinant human bone morphogenetic protein (rhBMP)-2 and evaluate them as rhBMP-2 carriers. Demineralized bovine bone particles, blocks, and rhBMP-2 were grafted into the subperiosteal space of a rat calvarial bone, and the rats were randomly divided into four groups: particle, block, P (particle)+BMP, and B (block)+BMP groups. The bone volume of the B+BMP group was significantly higher than that of the other groups (p < 0.00), with no significant difference in bone mineral density. The average adipose tissue volume of the B+BMP group was higher than that of the P+BMP group, although the difference was not significant. Adipose tissue formation was observed in the rhBMP-2 application group. Histologically, the particle and B+BMP groups showed higher formation of a new bone. However, adipose tissue and void spaces were also formed, especially in the B+BMP group. Hence, despite the formation of a large central void space, rhBMP-2 could be effectively used with block bone scaffolds and showed excellent new bone formation. Further studies are required to evaluate the changes in adipose tissue.

Monobloc Distraction and Facial Bipartition Distraction with External Devices

Monobloc and bipartition advancement by external distraction plays a major role in the treatment of syndromic craniosynostosis. They can reverse the associated facial deformity and play a role in the management of ocular exposure, intracranial hypertension, and upper airway obstruction. Facial bipartition distraction corrects the intrinsic facial deformities of Apert syndrome. Both procedures are associated with relatively high complication rates principally related to ascending infection and persistent cerebrospinal fluid leaks. Modern perioperative management has resulted in a significant decline in complications. External distractors allow fine tuning of distraction vectors and improve outcome but are less well tolerated than internal distractors.

Three-Dimensionally-Printed Bioactive Ceramic Scaffolds: Construct Effects on Bone Regeneration

BACKGROUND/PURPOSE

The utilization of three-dimensionally (3D)-printed bioceramic scaffolds composed of beta-tricalcium phosphate in conjunction with dipyridamole have shown to be effective in the osteogenesis of critical bone defects in both skeletally immature and mature animals. Furthermore, previous studies have proven the dura and pericranium's osteogenic capacity in the presence of 3D-printed scaffolds; however, the effect galea aponeurotica on osteogenesis in the presence of 3D scaffolds remains unclear.

METHOD/DESCRIPTION

Critical-sized (11 mm) bilateral calvarial defects were created in 35-day old rabbits (n = 7). Two different 3D scaffolds were created, with one side of the calvaria being treated with a solid nonporous cap and the other with a fully porous cap. The solid cap feature was designed with the intention of preventing communication of the galea and the ossification site, while the porous cap permitted such communication. The rabbits were euthanized 8 weeks postoperatively. Calvaria were analyzed using microcomputed tomography, 3D reconstruction, and nondecalcified histologic sectioning in order assess differences in bone growth between the two types of scaffolding.

RESULTS

Scaffolds with the solid (nonporous) cap yielded greater percent bone volume (P = 0.012) as well as a greater percent potential bone (P = 0.001) compared with the scaffolds with a porous cap. The scaffolds with porous caps also exhibited a greater percent volume of soft tissue (P < 0.001) presence. There were no statistically significant differences detected in scaffold volume.

CONCLUSION

A physical barrier preventing the interaction of the galea aponeurotica with the scaffold leads to significantly increased calvarial bone regeneration in comparison with the scaffolds allowing for this interaction. The galea's interaction also leads to more soft tissue growth hindering the in growth of bone in the porous-cap scaffolds.

Osseointegration evaluation of UHMWPE and PEEK-based scaffolds with BMP-2 using model of critical-size cranial defect in mice and push-out test

It the present study the push-out mechanical test was adopted for mouse model of implantation in critical-size cranial defects to evaluate the effectiveness of implant-skull fusion. As implants, disks of porous ultra-high molecular weight polyethylene (UHMWPE) and polyetheretherketone (PEEK) with hydroxylapatite (HA) with and without loading of recombinant bone morphogenetic protein-2 (BMP-2) were used. Implantation results were evaluated using histology and micro-computed tomography (micro-CT). In the case of both UHMWPE/HA and PEEK/HA, BMP-2 loading resulted in a significant increase in the amount of bone tissue in the implantation area, especially at the edges of the defect, and an increase in the value of BV/TV (bone volume/tissue volume) during micro-CT. There was a high correlation of BV/TV values with the maximum load and elastic modulus measured during the puch-out test. The maximum load values showed good convergence within the groups and are comparable to the maximum load values obtained by other authors in the rat model of implantation in critical-size cranial defects. An adapted push-out test can be used to evaluate the quality of osseointegration of the implanted materials.

Extraction socket grafting using recombinant human bone morphogenetic protein-2-clinical implications and histological observations

Objectives

Rehabilitation of edentulous ridges to promote the insertion of dental implants has been the key indicator for retaining osseous structures since tooth extraction. Recombinant Bone Morphogenetic Protein-2(rhBMP-2) is exploited for bone augmentation due to its osteoinductive capacity. The objective of the study to determine the effectiveness of bone induction for implant placement by rhBMP-2 delivered on beta-tricalcium phosphate graft (β-TCP) and PRF following tooth extraction.

Results

Minimal changes in the width of the crestal bone relative to baseline values were found three months after socket grafting. A bone loss in the mesiodistal and buccolingual aspects of 0.6 ± 0.13 mm and 0.5 ± 0.13 mm was found, respectively. While drilling before the implant placement, the bone's clinical hardness evaluated through tactile was analogous to drilling into spruce or white pine wood. Total radiographic bone filling was seen in 3 months and no additional augmentation was needed during implant placement. Besides, histology shows no residual graft of bone particles. Therefore, the data from this study demonstrated that the novel combination of rhBMP-2 + β-TCP mixed with PRF has an effect on de novo bone formation and can be recommended for socket grafting before implant placement.

Progress and Prospects of Polymer-Based Drug Delivery Systems for Bone Tissue Regeneration

Despite the high regenerative capacity of bone tissue, there are some cases where bone repair is insufficient for a complete functional and structural recovery after damage. Current surgical techniques utilize natural and synthetic bone grafts for bone healing, as well as collagen sponges loaded with drugs. However, there are certain disadvantages associated with these techniques in clinical usage. To improve the therapeutic efficacy of bone tissue regeneration, a number of drug delivery systems based on biodegradable natural and synthetic polymers were developed and examined in in vitro and in vivo studies. Recent studies have demonstrated that biodegradable polymers play a key role in the development of innovative drug delivery systems and tissue engineered constructs, which improve the treatment and regeneration of damaged bone tissue. In this review, we discuss the most recent advances in the field of polymer-based drug delivery systems for the promotion of bone tissue regeneration and the physical-chemical modifications of polymers for controlled and sustained release of one or more drugs. In addition, special attention is given to recent developments on polymer nano- and microparticle-based drug delivery systems for bone regeneration.

A multifaceted biomimetic interface to improve the longevity of orthopedic implants

The rise of additive manufacturing has provided a paradigm shift in the fabrication of precise, patient-specific implants that replicate the physical properties of native bone. However, eliciting an optimal biological response from such materials for rapid bone integration remains a challenge. Here we propose for the first time a one-step ion-assisted plasma polymerization process to create bio-functional 3D printed titanium (Ti) implants that offer rapid bone integration. Using selective laser melting, porous Ti implants with enhanced bone-mimicking mechanical properties were fabricated. The implants were functionalized uniformly with a highly reactive, radical-rich polymeric coating generated using a unique combination of plasma polymerization and plasma immersion ion implantation. We demonstrated the performance of such activated Ti implants with a focus on the coating's homogeneity, stability, and biological functionality. It was shown that the optimized coating was highly robust and possessed superb physico-chemical stability in a corrosive physiological solution. The plasma activated coating was cytocompatible and non-immunogenic; and through its high reactivity, it allowed for easy, one-step covalent immobilization of functional biomolecules in the absence of solvents or chemicals. The activated Ti implants bio-functionalized with bone morphogenetic protein 2 (BMP-2) showed a reduced protein desorption and a more sustained osteoblast response both in vitro and in vivo compared to implants modified through conventional physisorption of BMP-2. The versatile new approach presented here will enable the development of bio-functionalized additively manufactured implants that are patient-specific and offer improved integration with host tissue. STATEMENT OF SIGNIFICANCE: Additive manufacturing has revolutionized the fabrication of patient-specific orthopedic implants. Although such 3D printed implants can show desirable mechanical and mass transport properties, they often require surface bio-functionalities to enable control over the biological response. Surface covalent immobilization of bioactive molecules is a viable approach to achieve this. Here we report the development of additively manufactured titanium implants that precisely replicate the physical properties of native bone and are bio-functionalized in a simple, reagent-free step. Our results show that covalent attachment of bone-related growth factors through ion-assisted plasma polymerized interlayers circumvents their desorption in physiological solution and significantly improves the bone induction by the implants both in vitro and in vivo.

The efficacy of rhBMP-2 loaded hydrogel composite on bone formation around dental implants in mandible bone defects of minipigs

Background

In dental or orthopedic surgery, bone substitutes are inserted with implants to promote osteogenesis and enhance osseointegration. The purpose of this research was to evaluate the efficacy of rhBMP-2 (recombinant human bone morphogenetic protein-2) loaded hydrogel composite for bone formation around dental implant in minipig mandible bone defect models.

Methods

We made bone defects with a diameter of 4 mm in minipig mandibles and inserted implants of the same size, to mimic the cases of inserting the screws in the bone defect or poor-quality bone. The rhBMP-2 (300 μg) loaded hydrogel composite (0.5 cc) inserted in the bone defect with the implant in the rhBMP-2 group. After 4 weeks, the mandibles were harvested to evaluate the new bone mass around implants using plain radiographs, micro-CT, and histology.

Results

The micro-CT analysis result showed that the quantity of new bone generation around the implant in the rhBMP-2 group was greater than that in the other groups. Comparing the ratios of bone to implant area in three groups by histology, the amount of newly formed bone in the rhBMP-2 group was the most.

Conclusion

The rhBMP-2 loaded hydrogel composite promotes osteogenesis around dental implant in minipig mandible bone defect, and enhance osseointegration between the dental implant and host bone.

Is Reconstruction of Large Mandibular Defects Using Bioengineering Materials Effective?

PURPOSE

Clinical tissue engineering has revolutionized surgery by improving surgical efficiency and decreasing the risks associated with traditional bone graft procurement techniques. Compared with autogenous bone grafts, composite tissue-engineered grafts fulfill the principles of osteoconduction, osteoinduction, and osteogenesis and provide adequate bone volume for maxillofacial reconstruction with less morbidity. The present study aimed to demonstrate the effectiveness, as defined by our success criteria, of a composite tissue-engineered bone graft in the reconstruction of mandibular defects.

PATIENTS AND METHODS

We implemented a retrospective case series and enrolled a sample of patients with mandibular defects that had been reconstructed using allogeneic bone combined with recombinant human bone morphogenic protein-2 and bone marrow aspirate concentrate at our institution during a 5-year period. The success criteria were as follows: 1) bone union, defined as a homogenous radiopaque pattern continuous with native bone without mandibular mobility; and 2) volume of grafted bone adequate for implant placement, defined as at least 1.0 cm (height) by 0.8 cm (width). Clinical examinations and computed tomography scans were performed at 6 months postoperatively. Descriptive statistics were computed for each variable.

RESULTS

From 2014 to 2019, tissue engineering reconstruction was used in 31 patients with and 3 patients without mandibular continuity defects, for a total of 34 patients. The median follow-up was 6 months. The mean length of the continuity defects was 5.5 cm (range, 1.0 to 12.5). Of the 30 patients with mandibular continuity defects, 27 achieved success according to our criteria, with an average gained height of 2.12 ± 0.64 cm and width of 1.53 ± 0.46 cm. Of the 34 patients, 1 was lost to follow-up, and treatment failed in 3 patients.

CONCLUSIONS

Although the use of autogenous graft remains the reference standard, the evolving science behind clinical tissue engineering has resulted in an effective treatment modality for complex head and neck defects with less morbidity and graft material equal to that of autogenous bone.