Is Bone Graft or Guided Bone Regeneration Needed When Placing Immediate Dental Implants? A Systematic Review

Bone graft substitutes and dental implant stability in immediate implant surgery: a systematic review and meta-analysis

INTRODUCTION

Implant dentistry is currently being revolutionized by breakthroughs in techniques, technology, and material, there are few systematic reviews and meta-analyses that examine the effects of utilizing different bone graft substitutes in immediate implant placement surgeries.

AIM

The purpose of this research is to systematically review and meta-analyze the effect that different bone graft substitutes have on implant stability when concurrently utilized in patients undergoing immediate implant surgeries.

METHODOLOGY

The PICO criteria were used to construct the focused question, and the systematic review has been outlined as per the PRISMA guidelines. The revised Cochrane risk-of-bias method for randomized trials was used to assess the risk of bias for the selected articles. To derive estimates for the results, random effects meta-analysis was conducted on the selected articles.

RESULTS

The electronic databases were searched and a total of 1583 articles were identified. After title and abstract screening and due to problems in retrieval a further 1358 articles were eliminated. Fifteen articles were finally chosen to be qualified for review. Of which full text evaluation of 5 articles were found to meet the eligibility criteria and were therefore included in the systematic review.

CONCLUSION

This systematic review and meta-analysis on the stability of dental implants and bone graft substitutes in immediate implant surgery, was unable to draw any conclusions and established no statistically significant correlation between the different types of grafts used and implant stability.

Effect of milliamperage on cone-beam computed tomography evaluation of bone grafts around dental implants

Purpose

Bone grafts can be challenging to assess on cone-beam computed tomography (CBCT) examinations due to their discreet appearance and the potential introduction of metallic artifacts from implant screws. This study aimed to evaluate the effect of CBCT milliamperage (mA) on detecting bone graft dehiscence adjacent to titanium (Ti) and zirconia (Zr) implants.

Materials and Methods

Twenty Ti and 20 Zr implants were installed in bovine rib blocks. Gaps of at least 2 mm were created between the implant and the bone and filled with particulate autogenous bone grafts. In half of the blocks, the gap was completely filled, while in the other half, the grafting material was removed up to the third implant thread. CBCT images were acquired at 4, 6.3, and 10 mA and evaluated by 5 observers to detect bone graft dehiscence. The area under the receiver operating characteristic curve, accuracy, sensitivity, and specificity were calculated. These values were then compared across various dental implant materials and mA levels using 2-way analysis of variance with a significance level of 5%.

Results

No statistically significant differences were observed in the diagnostic values for bone graft dehiscence between implant types (P>0.05) or mA settings (P>0.05).

Conclusion

Although a protocol with lower radiation exposure (that is, lower mA) could be employed, the use of CBCT for evaluating bone graft dehiscence adjacent to different types of dental implants should be approached with caution.

Use of Deproteinized Bovine Bone in Association with Calcium Sulphate for Alveolar Socket Preservation

Background: The aim of this retrospective study was to compare the histomorphometry of post-extractive sites previously grafted with deproteinized bovine bone, with or without the association of a calcium sulphate preparation. Methods: The retrospective evaluation comprehended patients previously selected and treated for the extraction of one or more mono-radicular teeth, followed by an implant-prosthetic rehabilitation. Post-extractive sites had been randomly assigned to test or control group, respectively, if deproteinized bovine bone was used in association with a calcium sulphate preparation or alone. In both cases, a collagen membrane was employed to cover the grafted area. After four months, a biopsy of regenerated bone was taken from all grafted sites and then processed for histomorphometric analysis. Results: Of 24 samples analyzed 4 months after extraction, vital bone was present in 62.5% of cases for the test group and in 31.25% for the control group. Acellular bone was respectively found in 5% of cases for the test group and in 32.91% for the control group. Both these differences were statistically significant (p < 0.05) between groups. Conclusions: Calcium sulphate in association with deproteinized bovine bone seems to promote proper vital bone formation, with less acellular bone compared to deproteinized bovine bone used alone. Socket preservation procedures with the use of specific osteoconductive materials improve the maintenance of width and height of remaining bone. Findings of the present study offer clinicians a predictable protocol for preserving vital bone in early healing of post-extraction sites, slowing down the resorption process at the same time.

Horizontal Bone Augmentation with Simultaneous Implant Placement in the Aesthetic Region: A Case Report and Review of the Current Evidence

This study aimed to describe a case of simultaneous guided bone regeneration (GBR) and implant placement in a patient with prior aesthetic implant failure, focusing on achieving optimal aesthetic and functional outcomes, and to perform a literature review of the current evidence. A 38-year-old male presented with an improperly positioned implant at the level of the right upper central (tooth 2.1), leading to aesthetic and functional issues. The initial assessment included a panoramic radiograph revealing marginal bone loss and an enlarged peri-implant space, necessitating implant removal. Following implant removal and provisional restoration, the patient was re-evaluated for subsequent therapeutic treatments. The patient underwent orthodontic treatment to improve mesio-distal spacing, followed by surgical intervention involving GBR and simultaneous implant placement. The GBR procedure utilised bone substitutes and resorbable membranes, with soft tissue augmentation conducted subsequently. The surgical intervention involved local anaesthesia, flap design, defect assessment, and palatally oriented implant placement. GBR was then performed. After six months, implant uncovering and soft tissue augmentation were conducted. The implant was loaded with a screwed restoration following complete hard and soft tissue healing. The patient was monitored every six months for two years, then annually. At the 10-year follow-up, no signs of bone resorption or soft tissue inflammation were observed. This case demonstrated that GBR and simultaneous implant placement, with the application of advanced biomaterials, effectively promoted osseointegration and maintained aesthetic and functional stability over a decade.

Immediate implant placement for chronic peri-apical periodontitis in the molar region: a randomised controlled trial

The aim of this study was to evaluate the feasibility of immediate implantation for chronic peri-apical periodontitis in the molar region. Seventy-four molars were selected and allocated randomly to two groups. The experimental group (n = 38) received immediate implantation by flap surgery and the control group (n = 36) received delayed implantation. CBCT was performed immediately after surgery (T1) and 12 months after the permanent repair (T3). The implant survival rate at T3 was 100% in both groups. There was no significant difference in buccal or lingual vertical marginal bone loss between the groups (P = 0.515, P = 0.736). However, the buccal horizontal margin bone loss was significantly greater in the experimental group: 0.98 ± 0.34 mm vs 0.77 ± 0.27 mm in the control group (P = 0.003). In the experimental group, the highest point of buccal and lingual implant-bone contact increased at T3. The buccal and lingual jump gap widths were 3.21 ± 1.10 mm and 2.92 ± 1.01 mm at T1, and CBCT showed no jump gap around the implants at T3. The clinical outcomes showed immediate implantation to be feasible for chronic peri-apical periodontitis in the molar region.

Bone formation in large/moderate gap after immediate implantation in response to different treatments: a pre-clinical study in the canine posterior mandible

OBJECTIVES

This study aims to investigate different treatments on new bone formation around immediate implants in the canine posterior mandible with varying sized mesial-distal gap.

MATERIALS AND METHODS

The 4th premolar and the 1st molar of six Labrador dogs were extracted from the mandible, and 4 dental implants were placed 1 mm below the level of the buccal bone crest. Moderate/large mesial-distal gaps between the implants and the sockets were treated with one of four methods and divided into the following groups: (1) the blank group, (2) the collagen membrane (CM) group, (3) the deproteinized bovine bone mineral (DBBM) group, and (4) the DBBM + CM group. Sequential fluorescent labeling was performed at 4, 8, and 10 weeks after the operation. After 12 weeks, the dogs were euthanized, and specimens were collected for micro-CT scanning and histological analysis.

RESULTS

The survival rate of immediate implant was 100%. Micro-CT showed significant differences in bone mineral density (BMD) and bone volume fraction (BVF) among groups (P = 0.040, P = 0.009); other indicators were not significantly different among groups. Histological analysis showed the proportion of new bone formation and bone-to-implant contact were not significantly different among groups. No significant difference in bone reduction height around dental implant among four groups and varied mesial-distal gap size.

CONCLUSION

Owing to the restricted sample size, this pilot study lacks conclusive findings. Within the limitation, this study demonstrated that although DBBM significantly increase BMD and BVF, the use of DBBM/CM didn't significantly improve bone formation and healing in extraction sockets around the implants in both moderate and large mesial-distal gap.

CLINICAL RELEVANCE

The use of deproteinized bovine bone in conjunction with collagen is a common practice in immediate implantation procedures in the posterior mandible. However, there is a lack of conclusive evidence regarding the timing and circumstances under which they should be employed.

Healing outcomes of open versus closed flap procedures for collagen membrane coverage following immediate dental implant placements with simultaneous guided tissue regeneration

OBJECTIVE

To compare the outcomes of open healing to complete closure for collagen membrane coverage for immediate implant placements with simultaneous guided bone regeneration (GBR) in two retrospective cohorts.

METHODS

The subjects included 118 patients who received Bio-Gide® collagen membrane coverage for immediate implant placements and GBR in 20 anterior and 98 posterior teeth. For 58 patients, gingival flaps were released to achieve full coverage of collagen membrane (CC group). For 60 patients, no efforts were made to release the gingival flaps and collagen membrane was left exposed for open healing (OH group). Antibiotics and analgesics were prescribed for 7 days after surgery. The width of crestal open wounds were measured after surgery (W0), and at 1, 2 and 16 weeks (W16). Changes in bone mass were assessed by cone-beam computed tomography after implant placement and again at W16. Gingival and bone tissues over the implant cover screws were harvested and assessed for 16 patients in the OH group at W16.

RESULTS

No wound dehiscence occurred in the CC group from W0 to W16. Both the vertical and horizontal bone dimension changes were not significantly different between the OH and CC group. For the OH group, soft tissue was completely healed at W16 when the initial wound widths were ≤6 mm. For those with initial wound widths ≥ 7 mm, the cover screws were exposed in 5/16 patients at W16 but did not affect the final restorations. Tissue staining showed keratinized mucosa and new bone formation above the dental implant in the OH group.

CONCLUSION

Open healing achieved healing outcomes similar to those of complete closure for collagen membrane coverage following immediate implant placements.

CLINICAL SIGNIFICANCE

For immediate implant placement requiring bone grafting and collagen membrane coverage, it is unnecessary to release the gingival flaps or use tissue grafts to achieve full coverage of the crestal wounds. Open healing with exposed membrane could achieve similar outcomes with less pain and swelling.

Is Online Patient-Centered Information About Implant Bone Graft Valid?

Background A dental implant is one of the most commonly used treatments to replace missing teeth. A reasonable number of implant cases necessitate using a bone graft before or at the time of implant placement. This study aims to evaluate the quality and readability of online patient-centered information about implant bone grafts. Methodology This cross-sectional study used Google, Yahoo, and Bing search engines. The keywords were entered to screen 900 websites. The DISCERN, Journal of the American Medical Association (JAMA), and Health on the Net (HON) code tools evaluated the included websites for quality. The Flesch reading-ease score (FRES), Flesch-Kincaid grade level, and simple measure of gobbledygook tests measured readability. Statistical analysis was done using SPSS version 25 (IBM Corp., Armonk, NY, USA). Results A total of 161 websites were included; 65 (40.4%) of the included websites belonged to a university or medical center. Only five (3.1%) websites were exclusively related to dental implant treatments. DISCERN showed moderate quality for 82 (50.9%) websites. There was a statistical difference between commercial and non-profit organization websites. In the JAMA evaluation, currency was the most commonly achieved in 67 (41.6%) websites. For the HON code, four (2.5%) websites were certified. Based on FRES, the most common readability category was "fair difficult," accounting for 64 (39.8%), followed by "standard" in 56 (34.8%) websites. Conclusions The study findings suggest that English-language patient-centered information about implant bone grafts is challenging to comprehend and of low quality. Hence, there is a need to establish websites that provide trustworthy, high-quality information on implant bone grafts.

Cone-Beam Computed Tomography (CBCT)-Based Assessment of the Alveolar Bone Anatomy of the Maxillary and Mandibular Molars: Implication for Immediate Implant Placement

Purpose This study aims to examine specific aspects of socket morphology, including buccal and palatal/lingual bone width, interradicular bone (IRB) width, and assessments of root apices and furcation proximity to the vital structures of the maxillary and mandibular first and second molars using cone-beam computed tomography (CBCT). Materials and methods The study involved the analysis of 400 maxillary and mandibular first and second molars. Various measurements were taken to assess socket morphology, including mesiodistal (MD) and buccolingual (BL) width, buccal and lingual bone thickness at 2 mm apical to the alveolar crest, IRB width at 2 mm from the furcation, and the distance between the root apices and furcation to vital structures, such as the floor of the maxillary sinus (FMS) and inferior alveolar nerve (IAN). Results The mesiobuccal (MB) root of the second molar commonly intruded into the sinus, followed by the palatal root of the maxillary first molar. The mean FMS-F distance was 7.17 + 3.98 mm, and it was 7.2 + 2.72 mm for maxillary first and second molars, respectively. The mean IRB width was 2.77 + 0.96 and 2.29 + 0.74 mm for the first and second molars. The mandibular second molar had the shortest distance to the IAN in comparison to the first molar. For maxillary teeth, 7% of the first and 4% of the second molars presented alveolar anatomy adequate for immediate implant placement, compared to 84% and 50% of mandibular first and second molars. Conclusion Understanding the local alveolar bone anatomy of molars and its relationship to vital structures is crucial for the effective planning of implant treatments.

A CBCT Study of Labial Alveolar Bone Thickness in the Maxillary Anterior Region in a Teaching Hospital Population in the Eastern Province of Saudi Arabia

BACKGROUND AND OBJECTIVES

Labial alveolar bone thickness in the maxillary anterior region is the key factor in the placement of implants. Differences in the thickness of the bone are reported among different ethnic groups. Thus, the present study was aimed at assessing labial alveolar bone thickness in the maxillary anterior region in the population of the eastern province of Saudi Arabia.

MATERIALS AND METHODS

The six anterior teeth in each of the 186 CBCT sagittal images were analyzed at three points: Point A from the facial plate at the level of the bone crest to the coronal root third, Point B to the mid-root surface, and Point C to the apical third. Crest height (Point D) was measured as the distance from the CEJ to the alveolar bone crest. The analysis was done using SPSS version 20. A p-value of <0.05 was considered statistically significant.

RESULTS

The bone thickness at any given point (Point A, Point B, or Point C) was less than the preferred bone thickness of 2 mm in all six teeth. The thickness was minimum at Point B, maximum at Point C, and intermediate at Point A. This difference was found to be statistically significant (p-value < 0.05). The crestal height (Point D) was less than 3 mm, and it was not statistically significant. Comparison of bone thickness on the right and left sides for any given point was not statistically significant except at Point A in the central incisor, where it was statistically significant (p-value = 0.035). Gender comparison of bone thickness showed no difference at Point A; however, at Points B and C, it showed statistical significance (p-value < 0.05).

CONCLUSIONS

The alveolar bone thickness being <2 mm in the labial anterior region warns of the importance of the proper assessment of bone during implant placement to have a predictable outcome.

Retrospective analysis of dental implants immediately placed in extraction sockets with periapical pathology: immediate implant placement in infected areas

BACKGROUND

The aim of this study is to examine the survival rates of immediate implants placed in extraction sockets with chronic periapical pathology.

METHODS

69 patients and 124 immediate implants were included in the study. The patients included in the study were examined in 3 groups. Group 1: Patients who underwent tooth extraction with periapical pathology and immediate implant placement. Group 2: patients who underwent tooth extraction with periapical pathology, immediate implant placement and guided bone regeneration. Group 3: Patients who underwent tooth extraction with periapical pathology, sinus lift procedure and immediate implant placement. In statistical analysis, t-test and Anova analysis were used in the evaluation of quantitative data, cross-tables and chi-square (χ2) test were used in the evaluation of classified qualitative data. Statistical significance was determined as p < 0.05.

RESULTS

It was observed that 116 (95.55%) of 124 implants were successful and 8 (4.45%) failed. The success rate was 97.2% in Group 1, 93.5% in Group 2 and 81.8% in Group 3. A significant correlation was found between the study groups and implant success in terms of χ2 test (p = 0.037). A significant relationship was found between smoking and success in terms of the χ2 test (p = 0.015).

CONCLUSIONS

High survival rates are observed for immediate implant placement in sockets with periapical pathology. The success rates observed in guided bone regenerations simultaneously with immediate implant placement are at satisfactory levels. In cases where simultaneous sinus lifting procedures are required, the success rates were observed to be significantly lower. In case of adequate curettage and debridement in sockets with periapical pathology, high implant survival rates are observed. As the complexity of the surgical procedure increases, treatment protocols may progress in safer ways.

Bone dimensional changes after flapless immediate implant placement with and without bone grafting: Randomized clinical trial

INTRODUCTION

Immediate implant in postextraction sockets requires managing the postextraction alveolar resorption. This randomized clinical trial examined vertical and horizontal changes 1-year following flapless immediate implant with and without xenograft at sites with thin labial plate.

METHODS

Forty patients with hopeless teeth in maxillary esthetic zone were randomly assigned to receiving either one immediate implant without bone graft (control) or with bone graft (intervention). Cone beam computed tomography (CBCT) scans were obtained pre-extraction and 1-year postoperatively to measure thickness and dimensional changes of the labial bone.

RESULTS

Cone beam computed tomography measurements revealed that a xenograft, when compared to no xenograft, led to 0.2 mm increased fill of the horizontal gap (95% confidence interval (CI): -1.1, 0.7). In both groups, there was a significant reduction in the labio-palatal bone width after 1 year compared to baseline (P ≤ 0.05). There was no significant difference (P > 0.05) between the xenograft when compared to no xenograft regarding the labio-palatal bone collapse % at 0 mm (-0.2, 95% CI: -4.8, 4.5) and 2 mm apical to the labial crest (1.9, 95% CI: -1.8, 5.6). While at 5 mm the ridge was significantly reduced (P ≤ 0.05) in the no xenograft when compared to xenograft (4.5, 95% CI: 0.7, 8.2). The xenograft when compared to no xenograft, led to 1.1 mm less vertical bone changes (95% CI: 0.4, 1.9). Both groups revealed significant positive correlation between labio-palatal socket dimension and bone formed labial to the implant (P ≤ 0.05). [Correction added on 7 February 2023, after first online publication: In the 8th line of this section, the word "collapse" was changed to "ridge" in this version.] CONCLUSION: This investigation suggested that immediate implants with or without grafting the labial gap preserved alveolar bone dimension and that bone formation labial to the implant was related to initial labio-palatal socket dimension.

Application of Biocompatible Scaffolds in Stem-Cell-Based Dental Tissue Engineering

Tissue engineering as an important field in regenerative medicine is a promising therapeutic approach to replace or regenerate injured tissues. It consists of three vital steps including the selection of suitable cells, formation of 3d scaffolds, and adding growth factors. Mesenchymal stem cells (MSCs) and embryonic stem cells (ESCs) are mentioned as two main sources for this approach that have been used for the treatment of various types of disorders. However, the main focus of literature in the field of dental tissue engineering is on utilizing MSCs. On the other hand, biocompatible scaffolds play a notable role in this regenerative process which is mentioned to be harmless with acceptable osteoinductivity. Their ability in inhibiting inflammatory responses also makes them powerful tools. Indeed, stem cell functions should be supported by biomaterials acting as scaffolds incorporated with biological signals. Naturally derived polymeric scaffolds and synthetically engineered polymeric/ceramic scaffolds are two main types of scaffolds regarding their materials that are defined further in this review. Various strategies of tissue bioengineering can affect the regeneration of dentin-pulp complex, periodontium regeneration, and whole teeth bioengineering. In this regard, in vivo/ex vivo experimental models have been developed recently in order to perform preclinical studies of dental tissue engineering which make it more transferable to be used for clinic uses. This review summarizes dental tissue engineering through its different components. Also, strategies of tissue bioengineering and experimental models are introduced in order to provide a perspective of the potential roles of dental tissue engineering to be used for clinical aims.

Can the Immediate Implantation With Immediate Loading Achieve an Acceptable Esthetic Outcome? A Prospective Observational Clinical Study

The trending protocol in implantology aims at integrating the esthetic on par with function while reducing discomfort and treatment time with optimal results. The purpose of this study was to evaluate the pink esthetic score in sites treated by graftless instant implantation that was boosted by instant provisionalization with a 2 to 3 mm jumping distance. Thirty-five implants were inserted in the extraction sockets of teeth of 29 healthy qualified patients (22 females and 7 males) with an age range of 23 to 60 years [mean±SD age 41.11±9.9 y). Preoperative assessment was complemented clinically and radiographically for each patient. The used system was Medentika dental implant (Germany). Osstell implant stability quotient was used to measure implant stability at the time of surgery (baseline) and at 16 weeks. Four implants in 3 patients failed. The implant survival rate was 88.6%. The protocol of this study produced a significant decrease in the jumping distance which is 2 to 3 mm at cone-beam computed tomography evaluation with satisfactory esthetic outcomes clinically. Further comparative studies with long-term and larger samples are needed to confirm the conclusion of this study.

Dimensional changes of peri-implant tissue following immediate flapless implant placement and provisionalization with or without xenograft in the anterior maxilla: a study protocol for a randomized controlled trial

Background

Dental implant therapy requires the preservation of peri-implant tissue in the cosmetic zone. Various surgical procedures have been presented, including ridge preservation, flapless method, and quick provisionalization. The goal of this research was to assess the buccal bone dimensional changes following immediate flapless implant implantation in the front maxilla, with or without xenografting.

Method and design

Thirty patients who meet the inclusion criteria and have maxillary teeth (numbers 14 to 24) are candidates for the immediate implant with immediate provisionalization. Participants will be assigned randomly to one of two groups: (1) an immediate implant with xenograft and (2) an immediate implant without bone grafting. For 3 months, the temporary prosthesis will be installed shortly before the final restoration. Following temporary prosthesis insertion and 6 months after surgery, a CBCT radiograph will be used to examine bone tissue. Soft tissue will be assessed at three points: baseline, 3 months, and 6 months following implant therapy. Patients’ satisfaction, implant failure, prosthesis failure, and complications will be assessed as secondary outcomes after 6 months.

Discussion

The outcomes of this randomized clinical research will show if buccal bone augmentation with xenograft reduces vertical bone and gingiva recession. The findings and patient-reported outcomes will aid in the selection of therapy alternatives for implant treatment patients.

Trial registration

Iranian Registry of Clinical Trials IRCT20211119053106N1. Registered on 6 December 2021 and Open Science Framework (OSF) on May 20, 2022. Registration DOI https://doi.org/10.17605/OSF.IO/VUGFQ.

The effect of loading time on marginal bone change of implants immediately placed after extraction: a retrospective study

BACKGROUND

The purpose of this study is to compare and analyze the treatment outcomes between two groups which are both immediately placed implant cases, one is immediate loading, and the other is conventional loading group.

METHODS

Medical records of the patients who underwent implant treatment which were immediately placed after tooth extraction were analyzed. Demographic data were collected and by using periapical or panoramic radiographic image, marginal bone level and distant crestal bone level were measured. Marginal bone change over time was analyzed and compared between immediate loading group and conventional loading group.

RESULTS

A total of 71 patients, 112 immediately placed implants after tooth extraction were initially involved. Measuring was done with implants which had not failed (81). 10 implants were had failed and removed. The others were excluded because of follow-up loss, absence of radiographic image, etc. Demographic data were collected, and measured values were averaged at each follow-up and showed in linear graphs.

CONCLUSIONS

In case of immediate implantation of dental implant after extraction, loading time could affect marginal bone level or biological width of the implant. Immediate loading group showed 0.92 mm (mean value) more bone loss compared to conventional loading group at bone-implant contact points 24 months after implantation. At distant crestal points, there was no noticeable difference in bone change pattern between two groups.

Immediate implant placement with or without socket grafting: A systematic review and meta-analysis

OBJECTIVES

To assess the effect of grafting the gap (SG) between the implant surface and alveolar socket on hard and soft tissue changes following single immediate implant placement (IIP).

MATERIALS AND METHODS

Two independent reviewers conducted an electronic literature search in Pubmed, Web of Science, Embase and Cochrane databases as well as a manual search to identify eligible clinical studies up to August 2021. Randomized controlled trials (RCTs) comparing IIP with and without SG were included for a qualitative analysis. Meta-analyses were performed when possible.

RESULTS

Out of 3627 records, 15 RCTs were selected and reported on 577 patients who received 604 single immediate implants (IIP + SG: 298 implants in 292 patients; IIP: 306 implants in 285 patients) with a mean follow-up ranging from 4 to 36 months. Two RCTs showed low risk of bias. Meta-analysis revealed 0.59 mm (95% CI [0.41; 0.78], p < 0.001) or 54% less horizontal buccal bone resorption following IIP + SG when compared to IIP alone. In addition, 0.58 mm (95% CI [0.28; 0.88], p < 0.001) less apical migration of the midfacial soft tissue level was found when immediate implants were installed with SG. A trend towards less distal papillary recession was found (MD 0.60 mm, 95% CI [-0.08; 1.28], p = 0.080) when SG was performed, while mesial papillae appeared not significantly affected by SG. Vertical buccal bone changes were also not significantly affected by SG. Insufficient data were available for meta-analyses on horizontal midfacial soft tissue changes, pink esthetic score, marginal bone level changes, probing depth and bleeding on probing. Based on GRADE guidelines, a moderate recommendation for SG following IIP can be made.

CONCLUSION

SG may contribute to horizontal bone preservation and soft tissue stability at the midfacial aspect of immediate implants. Therefore, SG should be considered as an adjunct to IIP in clinical practice.

Effect of carbonate apatite as a bone substitute on oral mucosal healing in a rat extraction socket: in vitro and in vivo analyses using carbonate apatite

Background

Low bone quantity and quality are serious problems that affect the prognosis of implants in the cosmetic field. Therefore, artificial bone substitutes are frequently used. However, whether there is a difference in the effect of either bone substitute on soft tissue healing is unclear given their greatly different absorbability. In this study, we used hydroxyapatite (HAp) and carbonate apatite (CO₃Ap) as bone substitutes to analyze the epithelial and connective tissue healing after tooth extraction.

Methods

In vitro, oral mucosa-derived epithelial cells (OECs) collected from 4-day-old Wistar rats were seeded on HAp or CO₃Ap and evaluated for adhesion, proliferation, migration, apoptosis, and morphology. Fibroblasts (FBs) were also analyzed for their ability to express collagen. In vivo, the extraction of maxillary right first (M1) and second molars (M2) of 6-week-old male Wistar rats was performed, followed by insertion of HAp or CO₃Ap granules into the M1 and M2 sites. The oral mucosal healing process was then evaluated histochemically after 7 and 14 days.

Results

In vitro, high collagen expression by FBs in the CO₃Ap group was observed and the surface analysis showed spreading of the FBs on the CO₃Ap surface. However, the activity of OECs was suppressed on CO₃Ap. Two weeks after CO₃Ap implantation, soft tissue healing was observed, and recovery of the connective tissue was observed on the remaining CO₃Ap.

Conclusions

Our results suggest that the formation of soft tissues, including connective tissue, was promoted by CO₃Ap in the extraction socket within a short period.

Effect of CAD/CAM Guide Plate Combined With Socket-Shield Technique in Immediate Implantation of Anterior Teeth Aesthetic Area and Its Influence on Aesthetics

Purpose

The purpose of this study is to discuss the effect of computer-aided design or computer-aided manufacturing (CAD/CAM) guide plate combined with socket-shield technique (SST) in immediate implantation of anterior teeth aesthetic area and its influence on aesthetics.

Methods

A total of 102 patients with immediate implantation in our hospital from March 2017 to March 2020 were selected. According to different repair methods, patients were divided into conventional group (n = 51) and observation group (n = 51). Traditional immediate implantation was performed in conventional group. The observation group underwent immediate implantation with CAD/CAM guides combined with SST. Immediately after operation and 12 months after operation, the success rate, implant deviation, periodontal index, absorption of labial bone plate, complications, aesthetic effects, and satisfaction of the two groups were observed.

Results

There was no significant difference in the success rate between the two groups (p > 0.05). The implant deviation values in the observation group were all lower than those in the conventional group (p < 0.05). PD, PLI, and SBI in the observation group were all lower than those in the conventional group (p < 0.05). The absorption value of labial bone plate in the observation group were all lower than those in the conventional group (p < 0.05). The total incidence of complications in the observation group (5.88%) was lower than that in the conventional group (19.61%) (p < 0.05). The PES and WES in the observation group were higher than those in the conventional group (p < 0.05). The total satisfaction in the observation group (92.16%) was higher than that in the conventional group (76.47%) (p < 0.05).

Conclusion

: The application of CAD/CAM guide plate combined with SST in immediate implantation of anterior teeth aesthetic area has a good effect, which can improve the accuracy of implantation, improve the periodontal environment, reduce bone resorption, reduce complications, improve aesthetics, and have high patient's satisfaction.

Composite outcome measure (COM) and pocket closure as clinical endpoints following treatment of infra bony defects with Guided tissue regeneration and Open flap debridement

Background

Clinical outcomes of regenerative periodontal therapy has been traditionally assessed using surrogate markers, primarily clinical attachment level (CAL) gain and probing pocket depth (PPD) reduction. This study tried to assess newer clinical endpoints namely pocket closure and composite outcome measure (COM) apart from CAL gain, PPD reduction and gingival recession in patients who underwent guided tissue regeneration (GTR) and compared the same with open flap debridement (OFD) six months post treatment.

Materials and Methods

Records of 58 sites in 48 patients who had undergone GTR (28 sites) and OFD (30 sites) for infrabony defects were evaluated for CAL gain, PPD reduction, change in GR, FMBS, and FMPS at baseline and 6 months after surgery. Pocket closure and COM were used to assess the efficacy of both treatments.

Results

Statistically significant improvements were seen in both the groups except GR from baseline to 6 months. GTR-treated sites showed better improvements with a statistically significant difference in CAL gain after 6 months. Pocket closure and percentage of treatment success and failure in both the groups assessed using a COM were similar and did not differ statistically.

Conclusion

Treatment of infrabony defects with GTR combined with a xenograft offers better CAL gain after 6 months compared to OFD alone and also found that baseline PPD and FMBS were the factors determining pocket closure.

Primary stability and PES/WES evaluation for immediate implants in the aesthetic zone: a pilot clinical double-blind randomized study

The use of immediate implants in the aesthetic area is a technique widely used in modern implantology. The characteristics of the patient, the implant, and the surgical procedure used may influence the final results. The aim was to assess whether the implant design affects primary (P.S.) and secondary stability (S.S.), bone level (B.L.), and PES/WES evaluation. Twenty implants with two different designs (n = 10) were immediately placed and randomly located in the upper anterior maxilla with no grafting material. Implant-Stability-Quotient (ISQ), B.L., and Pink-Esthetic-Score/White-Esthetic-Score (PES/WES) were evaluated. Shapiro–Wilk normality test was performed to determine the sample normality, as the data did not follow a normal distribution, the Wilcoxon-Mann–Whitney test was applied (p < 0.05). ISQ was determined at placement (PS): control 59.1 (C.I.54.8–63.3); experimental 62.2(C.I.60.1–64.2) and three months after placement (SS): control 62.2.1 (C.I.53.3–71.0); experimental 67.2(C.I.65.8–68.5). The BL was measured at three months after placement: control 0.38 mm (C.I.− 0.06 to  + 0.83); experimental 0.76 mm (C.I.0.33–1.19) and at 12 months post-loading: control 0.07 mm (C.I.− 0.50–0.65); experimental 0.90 mm (C.I.0.38–1.42). PES/WES values were evaluated for the control group: 15 (C.I.12.68–17.32), and for the experimental group 15.20 (C.I.11.99–18.41). No significant differences were shown between both implant designs. A good grade of osseointegration and primary/secondary stability was achieved, as well as proper maintenance of crestal bone and adequate PES/WES scores. The criteria for selection for the ideal patient for immediate implant placement is essential.

ClinicalTrials Protocol ID: NCT04343833.

Efficacy of bone-substitute materials use in immediate dental implant placement: A systematic review and meta-analysis

OBJECTIVE

To assess the efficacy of using a bone substitute material (BSM) in the fixture-socket gap in patients undergoing tooth extraction and immediate implant placement.

MATERIALS AND METHODS

MEDLINE, EMBASE, and CENTRAL databases were searched for randomized controlled trials (RCTs). RCTs were screened for eligibility, and data were extracted by two authors independently. Risk of bias (ROB) was assessed using Cochrane's ROB tool 2.0. Primary outcomes were implant failure, overall complications, and soft-tissue esthetics. Secondary outcomes were vertical buccal bone resorption, vertical interproximal bone resorption, horizontal buccal bone resorption, and mid-buccal mucosal recession. Meta-analysis was performed using random-effects model with generic inverse variance weighing. GRADE was used to grade the certainty of the evidence.

RESULTS

After screening 19 544 potentially eligible references, 20 RCTs were included in this review, with a total of 848 patients (916 sites). Most included RCTs were deemed of some concerns (53%) or at low (38%) risk of bias, except for overall complications (high ROB). Implant failure did not differ significantly RR = 0.92 (confidence intervals [CI] 0.34 to 2.46) between using a BSM compared with not using a BSM (NoBSM). BSM use resulted in less horizontal buccal bone resorption (MD = -0.52 mm [95% CI -0.74 to -0.30]), a higher esthetic score (MD = 1.49 [95% CI 0.46 to 2.53]), but also more complications (RR = 3.50 [95% CI 1.11 to 11.1] compared with NoBSM. Too few trials compared types of BSMs against each other to allow for pooled analyses. The certainty of the evidence was considered moderate for all outcomes except implant failure (low), overall complications (very low), and vertical interproximal bone resorption (very low).

CONCLUSION

BSM use during immediate implant placement reduces horizontal buccal bone resorption and improves the periimplant soft-tissue esthetics. Although BSM use increases the risk of predominantly minor complications.

Efficacy of different surgical techniques for peri-implant tissue preservation in immediate implant placement: a systematic review and meta-analysis

INTRODUCTION

Preserving peri-implant tissues after immediate implant placement (IIP), especially in aesthetic zones, is a topic of interest.

OBJECTIVES

This systematic review investigated the effects of currently available surgical procedures for preserving peri-implant tissue or ensuring dimensional stability following immediate implant placement.

MATERIALS AND METHODS

The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement's guidelines were followed, and articles were sought on the PubMed and Cochrane databases with no date restrictions. Only randomised clinical trials that evaluated changes in soft and hard tissues around immediately placed implants were included. Statistical analyses were performed, and the studies´ quality was assessed using the Cochrane Collaboration tool. The agreement between reviewers was assessed based on Cohen's kappa statistics.

RESULTS

Of the 14 studies that met the inclusion criteria, 11 were analysed in the meta-analysis (kappa = 0.814; almost perfect agreement). The use of connective tissue grafts resulted in a significantly greater improvement of the facial gingival level (MD = -0.51; 95% CI: -0.76 to -0.31; p = < .001), and the placement of bone grafts significantly reduced the horizontal resorption of the buccal bone (MD = -0.59; 95% CI: -0.78 to -0.39; p < .001).

CONCLUSION

Connective tissue grafts and bone grafts positively influence tissue preservation around immediately placed implants. Neither the flapless technique nor palatal implant positioning resulted in significant improvements to any of the investigated parameters. Additional longitudinal studies are required.

CLINICAL RELEVANCE

This meta-analysis is useful for discerning the effects of soft tissue augmentation, bone grafting, the flapless technique, and palatal implant positioning on preserving peri-implant tissues after immediate implant placement.

Immediate dental implant placement with or without autogenous bone graft: A comparative study

Introduction

Immediate dental implants are the most accepted contemporary treatment option for the replacement of missing teeth. One pitfall of immediate implant use, however, is the inevitable residual space that remains between the implant and the socket wall, called the jumping distance, which may lead to bone resorption and formation of a bony defect, decreasing the implant stability. When this jumping distance is more than 2 mm, use of bone grafts is recommended. However, the use of grafts when the jumping distance is <2 mm is not defined in the literature.

Aim

To evaluate the peri-implant hard and soft tissue changes following immediately placed implants with a jumping distance of 2 mm with or without autogenous bone grafts.

Settings

The study was conducted between January 2016 and December 2017 in the Department of Oral and Maxillofacial Surgery.

Subjects and Methods

This was a prospective, single-center, two-arm, parallel, randomized study on patients undergoing replacement of missing anterior teeth with immediate implants. There were two groups: the study group which received bone graft and the control group which did not receive any graft. Temporary prosthesis was placed following implant placement which was replaced with definitive prosthesis 4 months later. Patients were followed up for a period of 9 months. The alveolar bone loss was evaluated radiologically using cone-beam computed tomography, and pain, suppuration, mobility, and periodontal probing depth were evaluated clinically.

Results

There were 16 participants in the study group and 17 in the control group. The alveolar bone loss was greater in the study group; however, pain, suppuration, and mobility showed no difference between the groups.

Conclusion

The immediate implants placed with or without bone grafts had similar alveolar hard and soft tissue changes when the jumping distance was <2 mm.

Current Trends in Research on Bone Regeneration: A Bibliometric Analysis

Background

Bone regeneration is a frequent research topic in clinical studies, but macroscopic studies on the clinical application of bone regeneration are rare. We conducted a bibliometric analysis, using international databases, to explore the clinical application and mechanism of bone regeneration, to highlight the relevant research hotspots and prospects. Material and Methods. Scientific reports on bone regeneration published during 2009–2019 were retrieved from PubMed. VOSviewer for cooccurrence keywords and authorship analysis. BICOMB software was used to retrieve high-frequency words and construct a text/coword matrix. The matrix was inputted into gCLUTO software, managed by biclustering analysis, in order to identify hotspots, which could achieve mountain and matrix visualizations. The matrix was also analyzed by using Ucinet 6 software for social network analysis. A strategic diagram was used for further analysis of the research hotspots of bone regeneration by “SCIMAT” software. We searched the Web of Science for relevant articles.

Results

Eighty-nine high-frequency major MeSH terms were obtained from 10237 articles and were divided into 5 clusters. We generated a network visualization map, an overlay visualization mountain map, and a social network diagram. Then, the MeSH terms were subdivided into 7 categories according to each diagram; current research hotspots were identified as scaffold, drug effect, osseointegration in dental implant, guided bone regeneration, factors impacting bone regeneration, treatment of bone and tissue loss, and bone regeneration in dental implants.

Conclusion

BICOMB, VOSviewer, and other bibliometric tools revealed that dental implants, scaffolds, and factors impacting bone regeneration are hot research topics, while scaffolds also hold promise from the perspective of bone tissue regeneration.

Clinical and Radiographic Evaluation of Simultaneous Alveolar Ridge Augmentation by Means of Preformed Titanium Meshes at Dehiscence-Type Peri-Implant Defects: A Prospective Pilot Study

Background: bone augmentation by means of manually shaped titanium mesh is an established procedure to regenerate atrophic alveolar ridges and recreate a proper contour of the peri-implant bone anatomy. Conversely, current literature on the use of preformed titanium meshes instead of traditional grids remains lacking. Therefore, the aim of the present prospective study was to evaluate the use of preformed titanium mesh to support bone regeneration simultaneously to implant placement at dehiscence-type defects from clinical, radiological, and patient-related outcomes. Methods: 8 implants showing buccal dehiscence defects were treated with preformed titanium mesh directly fixed to flat abutments screwed to the implant. Intrasurgical clinical measurements and radiographic evaluations by means of cone-beam computed tomography scans were performed to assess the horizontal bone gain after 8 months from the augmentation surgery. Biological and patient-centered outcomes were also evaluated.; Results: clinically, a mean horizontal bone gain of 4.95 ± 0.96 mm, and a mean horizontal thickness of the buccal plate of 3.25 ± 0.46 mm were found. A mean horizontal bone gain of 5.06 ± 0.88 mm associated with a mean horizontal thickness of the buccal plate of 3.45 ± 0.68 mm were observed radiographically. From a macroscopic aspect, the remodeled graft appeared well integrated with the host bone. Well vascularized newly formed bone-like tissue was observed in intimate contact with the implants. Conclusions: preformed titanium mesh may be effective in supporting simultaneous horizontal bone regeneration at dehiscence-type peri-implant defects. Titanium mesh exposure still remain an issue in this type of surgery.

Immediate implant placement in anterior teeth with grafting material of autogenous tooth bone vs xenogenic bone

Background

The aim of the study was to compare the efficacy of the autogenous tooth bone and xenogenic bone grafted in immediate implant placement with bone defect.

Methods

Thirty patients whose compromised anterior teeth need immediate implant placement were enrolled. Autogenous tooth bone made from the extracted teeth by chair-side or the xenogenic bone were used to repaired bone defect. Clinical examination, radiographic assessment about the horizontal bone change in the level of 0 mm, 3 mm and 6 mm below the implant neck and the marginal bone loss were made immediately, 6 and 12 months after implant placement. Questionnaire of the feelings about the surgery were made at the time of removing the sutures.

Results

All implants achieved the success criteria without any complications at the follow-up period. The percent of the horizontal bone change and the marginal bone loss at 6 and 12 months were almost the same between two groups (P > .05). The horizontal bone loss at the first or the latter 6 months was almost the same (P > .05). But the horizontal bone loss at the 6 mm level was less than the 0 mm and 3 mm levels at 6 and 12 months (P < .05). Meanwhile patients seem more satisfied with the autogenous tooth bone derived from the questionnaire.

Conclusion

The bone volume change in the facial part of the implant after immediate placement is almost the same between two groups. Providing clinical evidence that the autogenous tooth bone made from compromised tooth can be an acceptable bone graft material.

Bioceramic cement in the filling of bone defects in rats

Purpose

To evaluate PBS^®MCIMMO cement in the filling of bone defects.

Methods

Thirty-six adult male Wistar rats were divided into three groups of twelve individuals each (group 1, group 2 and group 3). In all groups, a bone failure in the femur was induced, 2.0 mm wide and 7.0 mm deep. In group 1, the PBS^®MCIMMO cement was applied to the bone defect produced and a titanium implant (CONNECTION^®) 1.5 mm thick and 6 mm long was installed. In group 2, only the PBS^® CIMMO cement was installed. In group 3, only bone failure was performed. Kruskal Wallis tests were performed to compare the mean area among the three groups.

Results

In all comparisons, significance was observed for group 2 (p = 0.0014–0.0026).

Conclusion

The PBS^®CIMMO cement induced bone neoformation, and integration between the newly formed bone, cement, and implant was observed.

Esthetic Rehabilitation of Maxillary Anterior Teeth, Including an Immediate Provisionalization with an Implant-Supported Fixed Dental Prosthesis

This report describes the case of a patient who required rehabilitation of their maxillary anterior teeth following a traumatic injury through a physical altercation. The decision was made to extract the maxillary central incisors and maxillary right lateral incisor, perform immediate implantation on the maxillary right lateral incisor and left central incisor areas, and place a three-unit immediate provisional restoration. Predesigned virtual teeth enabled efficient fabrication of the immediate provisional restoration following the implant placement. After a sufficient healing period with periodic check-ups, final impressions were made using a digital approach, with meticulous care taken to preserve the gingival architecture around the sites of rehabilitation. Thus, the custom abutments and definitive restoration were placed without eliciting an uncomfortable feeling in the patient. Both esthetic and functional outcomes were satisfactory. Reduced soft tissue volume around the implant restoration was observed, primarily within the two months post-extraction/implantation, based on superimposition of the serial scan data. Soft tissue volume changes in the present case suggest the need for controlled clinical studies of three-dimensional changes of gingival contours after extraction and/or implantation.

Validity of a regenerative procedure for a minor bone defect with immediate implant placement: a systematic review and meta-analysis

OBJECTIVE

This systematic review evaluates implant survival and the change in the width of the horizontal ridge following immediate implant placement with or without a regenerative procedure.

MATERIALS AND METHODS

An electronic search of MEDLINE, EMBASE, and the LILACS database of the Cochrane Central Register of controlled trials was performed, along with a manual search, up to April 2018. Randomized controlled trials (RCTs) and quasi-randomized controlled clinical trials (CCTs) with >10 subjects were eligible for this systematic review. A meta-analysis of the risk difference in implant failure between the regenerative and non-regenerative procedure groups was performed using a fixed-effect model. In addition, a meta-analysis of the change in alveolar bone width was conducted using a fixed-effect model.

RESULTS

Seven studies (six RCTs and one CCT) were included. A meta-analysis of three studies found no statistically significant risk difference in implant failure between the regenerative procedure and non-regenerative procedure groups. A meta-analysis of four studies showed that horizontal shrinkage of the alveolar ridge in the site of immediate implant placement was statistically significantly lower with the regenerative procedure than without it (<1 year follow up studies: weighted mean difference (WMD) 0.75 mm, 95% confidence interval 0.41-1.09, p < .00001; ≥1 year follow up study: WMD 1.22, 95% confidence interval 0.52-1.91, p = .00006; total: WMD 0.84 mm, 95% confidence interval 0.53-1.14, p < .00001).

CONCLUSION

Within the study limitations, immediate implant placement with a regenerative procedure showed similar implant survival and less shrinkage of the ridge width than immediate implant placement without a regenerative procedure. Due to the high risk of bias and small sample sizes of the included studies, further clinical studies are warranted to draw definitive conclusions.

Effect of guided bone regeneration on immediately placed implants: Meta-analyses with at least 12 months follow up after functional loading

INTRODUCTION

Immediate implant placement (IIP) into fresh extraction socket is a favorable treatment option. If successfully managed, it reduces the overall treatment time, and increases patient's satisfaction. Surgical and restorative factors affect IIP success rates. In this systematic review we evaluate the effect of guided bone regeneration (GBR) at the time of IIP on crestal bone level (CBL) changes after at least 12-months of functional loading.

METHODS

Reviewers conducted an independent search of the National Center for Biotechnology Information PubMed, Medline, and the Cochrane Collaboration Library from 1966 to January 2017 following the inclusion criteria. A hand search of bibliographies of reviews and clinical trials related to IIP was also performed. This study looked into CBL changes around IIP primarily and further extracted the data to conduct three meta-analysis of "IIP using GBR versus IIP without GBR", "IIP using bone graft alone versus IIP using bone graft with membrane" and "IIP using GBR versus conventional implant placement" which were further subdivided to provide more detailed information for each. Four reviewers independently assessed the study data and methodologic quality using data extraction and assessment forms.

RESULTS

The electronic search identified 714 potential studies and the hand search retrieved 55 studies. Crestal bone level (CBL) changes were determined in three meta-analyses. The results revealed a mean difference in CBL changes of 0.179 ± 0.174 mm  in favor of IIP without GBR when compared with implant with GBR. However, IIP with bone graft and membrane showed better results when compared with IIP with bone graft alone [CBL changes of 0.532 ± 0.572 mm]. CBL preservation was noted in IIP with GBR versus conventional implant placement [CBL changes of - 0.001 ± 0.049 mm].

CONCLUSIONS

Meta-analyses showed minimal difference in CBL around IIP with bone graft versus without bone graft and with IIP with GBR compared with conventional implant placement. However, IIP with bone graft and membrane reported better CBL preservation compared with IIP with bone graft alone. Nonetheless, these results should be interpreted with caution because of moderate heterogeneity between studies.

Experiment of GBR for repair of peri-implant alveolar defects in beagle dogs

To guide barrier membrane choice in the treatment of peri-implant alveolar bone defects, we evaluated guided bone regeneration (GBR) using titanium (Ti) mesh or Bio-Gide membrane, independently or in combination, for repair of alveolar bone defects in Beagle dogs. Six months after extraction of the mandibular premolars and first molars from three beagle dogs, we inserted implants assigned into 3 groups and covered with the following membrane combinations: Group A: Implant + Bio-Oss + Ti-mesh, Group B: Implant + Bio-Oss + Bio-Gide, and Group C: Implant + Bio-Oss + Ti-mesh + Bio-Gide. At 6 months, micro-CT revealed that bone volume/total volume (BV/TV), trabecular number (Tb.N), and trabecular thickness (Tb.Th) was significantly greater in Group C than the other two groups, while trabecular separation (Tb.Sp) was significantly lower, suggesting improved bone regeneration. The distance between bands of three fluorescent tracking dyes was significantly greater in Group C, indicating faster deposition of new bone. The Bio-Oss particles were ideally integrated with newly deposited bone and bone thickness was significantly larger in Group C. These findings suggest that combination of Bio-Gide membrane and titanium mesh can effectively repair peri-implant alveolar bone defects, achieving enhanced bone regeneration compared to titanium mesh or Bio-Gide alone, and therefore providing a novel treatment concept for clinical implant surgery.