Anticoagulation of Impella with a Bivalirudin Purge Solution

Outcomes of systemic bivalirudin and sodium bicarbonate purge solution for Impella 5.5

BACKGROUND

Impella 5.5 (Abiomed; Danvers, MA) (IMP5) is a commonly used, surgically implanted, tMCS device that requires systemic anticoagulation and purge solution to avoid pump failure. To avoid heparin-induced thrombocytopenia (HIT) from unfractionated heparin (UFH) use, our program has explored the utility of bivalirudin (BIV) for systemic anticoagulation and sodium bicarbonate-dextrose purge solution (SBPS) in IMP5.5.

METHODS

This single center, retrospective study included 34 patients supported on IMP5.5 with BIV based AC and SBPS between December 1st 2020 to December 1st 2021.The efficacy and safety end points were incidence of development of HIT, Tissue Plasminogen Activator (tPA) use for suspected pump thrombosis, stroke, and device failure as well as clinically significant bleeding.

RESULTS

The median duration of IMP5.5 support was 9.8 days (IQR: 6-15). Most patients were bridged to HTX (58%) followed by recovery (27%) and LVAD implantation (15%). Patients were therapeutic on bivalirudin for 64% of their IMP5.5 support. One patient (2.9%) suffered from ischemic stroke and 26.5% (9) patients developed clinically significant bleeding. tPA was administered to 7(21%) patients. One patient in the entire cohort developed HIT.

CONCLUSIONS

Our experience supports the use of systemic BIV and SBPS as a method to avoid heparin exposure in a patient population predisposed to the development of HIT.

What is known in pre-, peri-, and post-procedural anticoagulation in micro-axial flow pump protected percutaneous coronary intervention?

Interest in the use of percutaneous left ventricular assist devices (p-LVADs) for patients undergoing high-risk percutaneous coronary intervention (PCI) is growing rapidly. The Impella™ (Abiomed Inc.) is a catheter-based continuous micro-axial flow pump that preserves haemodynamic support during high-risk PCI. Anticoagulation is required to counteract the activation of the coagulation system by the patient's procoagulant state and the foreign-body surface of the pump. Excessive anticoagulation and the effect of dual antiplatelet therapy (DAPT) increase the risk of bleeding. Inadequate anticoagulation leads to thrombus formation and device dysfunction. The precarious balance between bleeding and thrombosis in patients with p-LVAD support is often the primary reason that patients' outcomes are jeopardized. In this chapter, we will discuss anticoagulation strategies and anticoagulant management in the setting of protected PCI. This includes anticoagulant therapy with unfractionated heparin, direct thrombin inhibitors, DAPT, purge blockage prevention by bicarbonate-based purge solution, and monitoring by activated clotting time, partial thromboplastin time, as well as anti-factor Xa levels. Here, we provide a standardized approach to the management of peri-interventional anticoagulation in patients undergoing protected PCI.

Evaluation of Thrombocytopenia in Patients Receiving Percutaneous Mechanical Circulatory Support With an Impella Device

Evaluate the time course of thrombocytopenia in patients with Impella devices (Abiomed, Danvers, MA).

Impella Management for the Cardiac Intensivist

The Impella mechanical circulatory support (MCS) system is a catheter-based continuous flow cardiac assist device that is widely used in the treatment of cardiogenic shock in medical and surgical cardiac intensive care units. As with all forms of MCS, device-related complications remain a major concern, the incidence of which can be mitigated by adhering to a few fundamental concepts in device management. The purpose of this review is to comprehensively describe our strategy for managing, repositioning, and weaning the Impella catheter.

Use of Sodium Bicarbonate Purge Solution in Impella Devices for Heparin-Induced Thrombocytopenia

Heparin purge solution is recommended to be used in Impella devices to prevent biomaterial buildup and subsequent device dysfunction. The use of sodium bicarbonate purge solution in an Impella device is described in two patients with heparin-induced thrombocytopenia (HIT). The first case details a patient with severe mitral regurgitation and cardiogenic shock who had an Impella CP placed who developed HIT. Heparin purge solution was replaced by sodium bicarbonate purge solution in addition to systemic direct thrombin inhibitor (DTI) initiation. There was no significant change in Impella purge pressure or flow over the 13 days of Impella use. The second case describes a patient who developed an acute myocardial infarction and subsequent cardiogenic shock for which an Impella CP was placed who also developed HIT. Heparin purge solution was replaced by sodium bicarbonate purge solution. There was no significant change in purge pressure, flow, or motor current spikes over 11 days of use. In conclusion, we describe the successful use of a novel sodium bicarbonate purge solution utilized in patients with HIT for Impella management alone and in combination with systemic direct thrombin inhibitor therapy. This resulted in no protein deposition in the device gaps or device dysfunction.

Heparin-Induced Thrombocytopenia under Mechanical Circulatory Support by Large Impella for Acute Cardiogenic Shock

Despite the critical feature of heparin-induced thrombocytopenia (HIT) for patients on mechanical circulatory support, reports on its incidence and outcome are still scarce. Thus, we report on clinical features of HIT in patients under Impella 5.0 or 5.5 (Abiomed Inc., Danvers, MA, USA) (Impella 5+) support for acute cardiogenic shock (CS) by focusing on observed thrombotic events. Between November 2018 and December 2020, a total of 56 consecutive patients were enrolled in a single-center retrospective study. A total of 21 patients (37.5%) were tested for HIT, and 6 (10.7%) proved positive for HIT at 10.5 ± 2.89 days after the first heparin administration during current admission. Interestingly, thrombocyte counts dropped under Impella support in all groups (all cases, no HIT test, and HIT negative group: p < 0.001, HIT-positive group: p = 0.001). All HIT-positive patients were switched from heparin to argatroban. HIT-associated thrombotic events were observed in two cases resulting in Impella dysfunction due to pump thrombosis (n = 1) and left ventricular (LV) thrombus formation (n = 1). Under large Impella support, the prevalence of HIT was relatively high. Further, thrombocytopenia does not deliver a high specificity in the setting of Impella 5+ support. Considering HIT manifestation, a routine HIT test may be considered to avoid critical thrombotic adverse events.

Optimizing anticoagulation for patients receiving Impella support

Anticoagulation of patients treated with the Impella percutaneous mechanical circulatory support (MCS) devices is complex and lacks consistency across centers, potentially increasing the risk of complications. In order to optimize safety and efficacy, an expert committee synthesized all available evidence evaluating anticoagulation for patients receiving Impella support in order to provide consensus recommendations for the management of anticoagulation with these devices. The evidence synthesis led to the creation of 42 recommendations to improve anticoagulation management related to the use of the Impella devices. Recommendations address purge solution management, intravenous anticoagulation, monitoring, evaluation and management of heparin-induced thrombocytopenia (HIT), and management during combination MCS support. The use of a heparinized, dextrose-containing purge solution is critical for optimal device function, and a bicarbonate-based purge solution may be an alternative in certain situations. Likewise, intravenous (ie, systemic) anticoagulation with heparin is often necessary, although evidence supporting the optimal assay and target range for monitoring the level of anticoagulation is generally lacking. Patients treated with an Impella MCS device may develop HIT, which is more difficult to evaluate and treat in this setting. Lastly, the use of Impella with extracorporeal membrane oxygenation or for biventricular support creates additional anticoagulation challenges.

Use of an argatroban systemic infusion and purge solution in a patient with a percutaneous ventricular assist device with suspected heparin-induced thrombocytopenia

DISCLAIMER

In an effort to expedite the publication of articles , AJHP is posting manuscripts online as soon as possible after acceptance. Accepted manuscripts have been peer-reviewed and copyedited, but are posted online before technical formatting and author proofing. These manuscripts are not the final version of record and will be replaced with the final article (formatted per AJHP style and proofed by the authors) at a later time.

PURPOSE

Thrombocytopenia can occur when using an Impella percutaneous ventricular assist device (pVAD), and heparin-induced thrombocytopenia (HIT) is often suspected. Data on heparin- and anticoagulant-free purge solutions in these devices are limited. Previous case reports have described argatroban-based purge solutions, both with and without systemic argatroban, at varying concentrations in patients with known or suspected HIT.

SUMMARY

A 33-year-old male was transferred to our institution and emergently initiated on life support with venoarterial extracorporeal membrane oxygenation (ECMO), an Impella pVAD, and continuous venovenous hemofiltration to receive an urgent aortic valve replacement. Over the next several days, the patient's platelet count declined with a nadir of 17 × 10 3/µL on hospital day 13. The patient's 4T score for probability of HIT was calculated as 4. All heparin products were discontinued on hospital day 15, and the patient was initiated on systemic infusion with argatroban 1,000 µg/mL at a rate of 0.2 µg/kg/min with a purge solution of argatroban 0.05 mg/mL. The systemic infusion remained at a rate of 0.2 µg/kg/min, and the total argatroban dose was, on average, less than 0.25 µg/kg/min. On hospital day 21, the patient was transferred to another institution.

CONCLUSION

Systemic infusion and a purge solution with argatroban were used in a patient with an Impella pVAD with multisystem organ dysfunction and suspected HIT. The patient achieved therapeutic activated partial thromboplastin times without adjustment of the systemic argatroban infusion and did not experience bleeding or thrombosis. Further studies concerning the safety and effectiveness of argatroban-based purge solutions in patients with pVADs are needed.

Outcomes of systemic anticoagulation with bivalirudin for Impella 5.0

Temporary mechanical circulatory support (tMCS) devices are used for the management of cardiogenic shock. The Impella 5.0 (Abiomed; Danvers, MA) (IMP5) is a commonly used, surgically implanted, tMCS device that requires systemic anticoagulation and purge solution to avoid pump failure. To avoid heparin-induced thrombocytopenia (HIT) from unfractionated heparin (UFH) use, our program has explored the utility of bivalirudin (BIV) for systemic anticoagulation in IMP5. This single center, retrospective study included patients supported on IMP5 with BIV based AC. The efficacy and safety end points were recovery, bridge to left ventricular assist device (LVAD), cardiac transplant (HTX), or death as well as clinically significant bleeding, incidence of Tissue Plasminogen Activator (tPA) use for suspected pump thrombosis, stroke, and device failure. There were 31 patients included, and 26 (84%) received BIV purge solutions. The median duration of IMP5 was 6 (IQR 4-10) days. Most patients were bridged to LVAD (39%, 12); 16% (5) were bridged to HTX, 16% (5) recovered, and 29% (9) died. One patient (3%) suffered from ischemic stroke and 12% (4) patients developed clinically significant bleeding. tPA was administered to 8 (26%) patients. Logistic regression analysis demonstrated that duration of IMP5 was a significant predictor of tPA use (OR 1.28; 95% Confidence Interval 1.04-1.56). There were no cases of pump failure. Our experience highlights the feasibility of utilizing BIV for routine AC use in IMP5.

Bivalirudin as a Systemic Anticoagulant and Flush Solution Additive for Sequential Mitral and Tricuspid Valve Percutaneous Edge-to-Edge Repair in a Patient With Heparin-Induced Thrombocytopenia

Herein the case of a patient with a prior history of heparin-induced thrombocytopenia who underwent percutaneous mitral valve edge-to-edge repair that was followed by a tricuspid edge-to-edge repair two months later is presented. Recommendations exist for systemic anticoagulant alternatives for percutaneous mitral valve edge-to-edge repair with the MitraClip device (Abbott, Chicago, IL), but minimal guidance and experience are present regarding alternative systemic anticoagulation during the performance of right-sided interventions, including tricuspid edge-to-edge repair (TriClip; Abbott). Notably, there is no clear consensus regarding the use of an alternative anticoagulant in the catheter flush solution for the delivery systems used during these procedures, particularly for right-sided interventions.