Evaluation of the Laguerre-Gaussian mode purity produced by three-dimensional-printed microwave spiral phase plates

A Fast Design Method of Anisotropic Dielectric Lens for Vortex Electromagnetic Wave Based on Deep Learning

Orbital angular momentum (OAM) has made it possible to regulate classical waves in novel ways, which is more energy- or information-efficient than conventional plane wave technology. This work aims to realize the transition of antenna radiation mode through the rapid design of an anisotropic dielectric lens. The deep learning neural network (DNN) is used to train the electromagnetic properties of dielectric cell structures. Nine variable parameters for changing the dielectric unit structure are present in the input layer of the DNN network. The trained network can predict the transmission phase of the unit cell structure with greater than 98% accuracy within a specific range. Then, to build the corresponding relationship between the phase and the parameters, the gray wolf optimization algorithm is applied. In less than 0.3 s, the trained network can predict the transmission coefficients of the 31 × 31 unit structure in the arrays with great accuracy. Finally, we provide two examples of neural network-based rapid anisotropic dielectric lens design. Dielectric lenses produce the OAM modes +1, -1, and -1, +2 under TE and TM wave irradiation, respectively. This approach resolves the difficult phase matching and time-consuming design issues associated with producing a dielectric lens.

Terahertz quasi non-diffraction Bessel vortex beam generation using three lattice types reflective metasurface

Bandwidth, orbital-angular momentum (OAM) divergence, and mode purity are the three critical issues for the practical terahertz orbital angular momentum manipulation, especially in the next sixth-generation (6G) communication system. Here we propose the broadband high-order Bessel vortex beam carrying multiple OAM modes reflective metasurface in the terahertz domain. The simulation results agree with the theoretical expectation, and the diffracting divergence of OAM vortex beam characteristics has been alleviated. The research on the relationship between the varieties of lattice type and mode purity is also relatively scarce. Henceforth, a comparison study has been conducted between three lattice types, i.e., square lattice, triangular lattice, and concentric ring lattice. And corresponding results of the relationship of mode purity with those lattice types show that the concentric ring lattice has the best performance.

Generation and Detection of Optical Vortices with Multiple Cascaded Spiral Phase Plates

Spiral phase plate (SPP) is the widely used method in the generation of vortex beam (VB) with fixed topological charges (TCs) for specific wavelength. Although VB with large TCs can be directly generated by using the SPP with high vortex order. The fabrication of high-quality SPPs with high vortex orders usually requires complex manufacturing process and high machining accuracy. An alternative method to generate VBs with large TCs is cascaded multiple SPPs with low order. In this study, we numerically calculate the transmitted light field of cascaded multiple SPPs according to the Huygens–Fresnel diffraction integral, and perform the experimental verifications. Based on cascading 6 SPPs (3 SPPs with TCs of 2, and 3 SPPs with TCs 4, respectively), an VB with TCs as high as 18 is generated. Furthermore, The TCs of the generated VB are detected by coaxial and off-axis interfering with fundamental Gaussian beam or its conjugate beam, respectively. The generated fork and spiral patterns allow us to distinguish the value and sign of TCs carried by the VB. The experimental results coincide well with the theoretical simulations. The fork pattern shows better resolution than the spiral one, and the petal pattern with small spiral allows us to distinguish large TCs with a higher resolution.

Reconstruction of three-dimensional objects in layered composite structures from multimode orbital angular momentum

Because of helical phase wavefront distribution, vortex electromagnetic waves are considered to carry more information and additional degrees of freedom than traditional spherical waves. Therefore, a vortex wave carrying orbital angular momentum (OAM) can improve inversion and imaging accuracy. In this work, we revisit the reconstruction of three-dimensional objects in layered composite structures extended with OAM. In forward modeling, the concentric uniform circle array is used to generate electromagnetic vortex beams. To analyze the difference of vortex beams, the electric field radiation pattern and phase pattern distribution of OAM waves with different modes are calculated. Then, the scattered field of layered media illuminated by different OAM beams is determined by the dyadic Green's function and the stabilized biconjugate gradient technique with a fast Fourier transform algorithm. In the inversion, the variational Born iterative method is used to reconstruct targets in layered composite structures, and multiple OAM modes are used to improve the reconstruction results. The numerical results prove that the permittivity of the target can be better reconstructed by using the multiple OAM modes rather than the traditional spherical wave. With the increase of OAM mode number, the reconstructed target parameters are closer to the true value. We expect that our results will provide a better understanding of the OAM and pave the way for the improvement of inversion and optical imaging technology using vortex waves.

Recent Advances in Generation and Detection of Orbital Angular Momentum Optical Beams-A Review

Herein, we have discussed three major methods which have been generally employed for the generation of optical beams with orbital angular momentum (OAM). These methods include the practice of diffractive optics elements (DOEs), metasurfaces (MSs), and photonic integrated circuits (PICs) for the production of in-plane and out-of-plane OAM. This topic has been significantly evolved as a result; these three methods have been further implemented efficiently by different novel approaches which are discussed as well. Furthermore, development in the OAM detection techniques has also been presented. We have tried our best to bring novel and up-to-date information to the readers on this interesting and widely investigated topic.