Near-field optical patterning and structuring based on local-field enhancement at the extremity of a metal tip

Enhancing Infrared Light-Matter Interaction for Deterministic and Tunable Nanomachining of Hexagonal Boron Nitride

Tailoring two-dimensional (2D) materials functionalities is closely intertwined with defect engineering. Conventional methods do not offer the necessary control to locally introduce and study defects in 2D materials, especially in non-vacuum environments. Here, an infrared pulsed laser focused under the metallic tip of an atomic force microscope cantilever is used to create nanoscale defects in hexagonal boron nitride (h-BN) and to subsequently investigate the induced lattice distortions by means of nanoscale infrared (nano-IR) spectroscopy. The effects of incoming light power, exposure time, and environmental conditions on the defected regions are considered. Nano-IR spectra complement the morphology maps by revealing changes in lattice vibrations that distinguish the defects formed under various environments. This work introduces versatile experimental avenues to trigger and probe local reactions that functionalize 2D materials through defect creation with a higher level of precision for applications in sensing, catalysis, optoelectronics, quantum computing, and beyond.

Focused electron-beam-induced deposition for fabrication of highly durable and sensitive metallic AFM-IR probes

We report on the fabrication of metallic, ultra-sharp atomic force microscope tips for localized nanoscale infrared (IR) spectrum measurements by using focused electron-beam-induced deposition of platinum or tungsten. The tip length can be controlled by changing the duration time of the electron beam. Probes of 12.0 ± 5.0 nm radius-of-curvature can be routinely produced with high repeatability and near-100% yield. The near-field-enhancement appears stronger at the extremity of the metallic tip, compared with commercial pristine silicon-nitride probe tip. Finally, the performance of the modified metallic tips is demonstrated by imaging PVDF and PMMA thin films, which shows that spatial resolution is greatly enhanced. In addition, the signal intensity of the localized nanoscale IR spectrum is increased offering greater sensitivity for chemical IR imaging.

Femtosecond Nanostructuring of Glass with Optically Trapped Microspheres and Chemical Etching

Laser processing with optically trapped microspheres is a promising tool for nanopatterning at subdiffraction-limited resolution in a wide range of technological and biomedical applications. In this paper, we investigate subdiffraction-limited structuring of borosilicate glass with femtosecond pulses in the near-field of optically trapped microspheres combined with chemical postprocessing. The glass surface was processed by single laser pulses at 780 nm focused by silica microspheres and then subjected to selective etching in KOH, which produced pits in the laser-affected zones (LAZs). Chemical postprocessing allowed obtaining structures with better resolution and reproducibility. We demonstrate production of reproducible pits with diameters as small as 70 nm (λ/11). Complex two-dimensional structures with 100 nm (λ/8) resolution were written on the glass surface point by point with microspheres manipulated by optical tweezers. Furthermore, the mechanism of laser modification underlying selective etching was investigated with mass spectrum analysis. We propose that the increased etching rate of laser-treated glass results from changes in its chemical composition and oxygen deficiency.

Development of nanomaterials for SALDI-MS analysis in forensics

Within the last decade, the escalation of research output in the field of nanotechnology has spurred the development of new nanomaterials for use as assisting agents in surface assisted laser desorption ionization mass spectrometry (SALDI-MS). Specifically modified nanomaterials, coupled with mass spectrometry, have improved the detection sensitivity, specificity, flexibility and reproducibility of SALDI-MS analysis. The technological advancement of LDI-MS has in turn, propelled the use of the analytical technique in the field of forensics. In this report, the various roles and applications of metal-, silicon- and carbon-based nanostructured materials as SALDI matrices in the analysis of forensic samples are described. The advantages of SALDI-MS as an analytical tool for forensic sample analysis are also discussed.

Near-field thermal transport in a nanotip under laser irradiation

We report on a systematic study of highly enhanced optical field and its induced thermal transport in nanotips under laser irradiation. The effects on electric field distribution caused by curvature radius, tip aspect ratio, and polarization angle of the incident laser are studied. Our Poynting vectors' study clearly shows that when a laser interacts with a metal tip, it is bent around the tip and concentrated under the apex, where extremely high field enhancement appears. This phenomenon is more like a liquid flow being forced/squeezed to go through a narrow channel. As the tip-substrate distance increases, the peak field enhancement decreases exponentially. A shift of field peak position away from the tip axis is observed. For the incident light, only its component along the tip axis direction has a contribution to the electric field enhancement under the tip apex. The optimum tip apex radius for field enhancement is about 9 nm when the half taper angle is 10°. For a tip with a fixed radius of 30 nm, field enhancement increases with the half taper angle when it is less than 25°. The thermal transport inside the nanoscale tungsten tips due to absorption of incident laser light is explored using the finite element method. A small fraction of light penetrates into the tip. As the polarization angle or apex radius increases, the peak apex temperature decreases. The peak apex temperature goes down as the half taper angle increases, even though the mean laser intensity inside the tip increases, revealing a very strong effect of the taper angle on thermal transport.

Fractures of the hip and osteoporosis: the role of bone substitutes

Failure of fixation is a common problem in the treatment of osteoporotic fractures around the hip. The reinforcement of bone stock or of fixation of the implant may be a solution. Our study assesses the existing evidence for the use of bone substitutes in the management of these fractures in osteoporotic patients. Relevant publications were retrieved through Medline research and further scrutinised. Of 411 studies identified, 22 met the inclusion criteria, comprising 12 experimental and ten clinical reports. The clinical studies were evaluated with regard to their level of evidence. Only four were prospective and randomised. Polymethylmethacrylate and calcium-phosphate cements increased the primary stability of the implant-bone construct in all experimental and clinical studies, although there was considerable variation in the design of the studies. In randomised, controlled studies, augmentation of intracapsular fractures of the neck of the femur with calcium-phosphate cement was associated with poor long-term results. There was a lack of data on the long-term outcome for trochanteric fractures. Because there were only a few, randomised, controlled studies, there is currently poor evidence for the use of bone cement in the treatment of fractures of the hip.

Investigation of the photochemistry of the poly{p-phenylenevinylene} precursor system: Implications for nanolithography

The photochemistry of poly{p-phenylene[1-(tetrahydrothiophen-1-io)ethylene chloride]} (PPTEC), a water soluble precursor of the semiconducting polymer, poly{p-phenylenevinylene} (PPV), has been studied both under atmospheric conditions and in environments devoid of oxygen. UV-visible spectroscopy and photoluminescence data has been used to provide a picture of the mechanistic pathways involved in UV irradiation of the PPTEC material. A new quantitative model for the effect of UV irradiation upon film morphology is presented, which leads to insights for the improved control of the characteristics of PPV nanostructures produced via near-field scanning optical lithography.

Electric near-field enhancing properties of a finite-size metal conical nano-tip

Finite-difference time-domain (FDTD) technique simulations are performed to study the near-field resonance properties of a silver conical nano-tip with a rounded end. Varying the tip geometry, we have computed the electric field distribution, as well as the electric field enhancement factor in the immediate vicinity of the tip apex. The aim of this study is to find optimal geometric parameters of the conical tip, such as its angle and length, in order to maximize the electric field enhancement factor. The increase of the tip length is shown to result in a redshift of the tip resonance wavelength. In addition, some subsidiary (non-dipole) peaks appear for relatively long tips. The peak enhancement values for the small-angle tips increase with the tip length while those for the large-angle ones decrease with it. At the same time, the dependencies of the field enhancement on the cone angle exhibit non-monotonic behavior. In other words, an optimal angle exists allowing one to maximize the electric near field. Finally, the effect of the supporting dielectric medium on the electric field near the tip apex is discussed. In the approximation used, the effect is shown to leave the main conclusions unchanged.

Field-enhanced scanning near-field optical microscopy

This manuscript reviews the principles and recent advances of scanning near-field optical microscopy based on tip-induced field enhancement. These scanning microscopes utilize minute probes to locally enhance an electromagnetic field through a complex interplay between surface plasmon excitation and localization of electric charges by geometrical singularities. The necessary conditions leading to an electromagnetic enhancement will be reviewed, as well as the means to characterize it. A brief account of the theoretical framework will be given, together with applications of the technique ranging from chemical imaging to nanolithography.

From anisotropic photo-fluidity towards nanomanipulation in the optical near-field

An increase in random molecular vibrations of a solid owing to heating above the melting point leads to a decrease in its long-range order and a loss of structural symmetry. Therefore conventional liquids are isotropic media. Here we report on a light-induced isothermal transition of a polymer film from an isotropic solid to an anisotropic liquid state in which the degree of mechanical anisotropy can be controlled by light. Whereas during irradiation by circular polarized light the film behaves as an isotropic viscoelastic fluid, it shows considerable fluidity only in the direction parallel to the light field vector under linear polarized light. The fluidization phenomenon is related to photoinduced motion of azobenzene-functionalized molecular units, which can be effectively activated only when their transition dipole moments are oriented close to the direction of the light polarization. We also describe here how the photofluidization allows nanoscopic elements of matter to be precisely manipulated.

Desorption/Ionization on Silicon Nanowires

Dense arrays of single-crystal silicon nanowires (SiNWs) have been used as a platform for laser desorption/ionization mass spectrometry of small molecules, peptides, protein digests, and endogenous and xenobiotic metabolites in biofluids. Sensitivity down to the attomole level has been achieved on the nanowire surfaces by optimizing laser energy, surface chemistry, nanowire diameter, length, and growth orientation. An interesting feature of the nanowire surface is that it requires lower laser energy as compared to porous silicon and MALDI to desorb/ionize small molecules, therefore reducing background ion interference. Taking advantage of their high surface area and fluid wicking capabilities, SiNWs were used to perform chromatographic separation followed by mass analysis of the separated molecules providing a unique platform that can integrate separation and mass spectrometric detection on a single surface.

Numerical modeling of the subwavelength phase-change recording using an apertureless scanning near-field optical microscope

The electromagnetic field enhancement (FE) at the end of the probe of an Apertureless Scanning Near-field Optical Microscope (ASNOM) is used to write nanometric dots in a phase-change medium. The FE acts as a heat source that allows the transition from amorphous to crystalline phase in a Ge2Sb2Te5 layer. Through the 2D Finite Element Method (FEM) we predict the size of the dot as a function of both the illumination duration and the incoming power density. Numerical results are found to be in good agreement with preliminary experimental data.

Near-field microscopy and lithography of light-emitting polymers

We describe the application of scanning near-field optical microscopy (SNOM) to the study of the photophysical and self-organization properties of thin films of blends of conjugated polymers, and also to the lateral nanoscale patterning of conjugated-polymer structures. Such thin-film plastic semiconductor nanostructures offer significant potential for use in opto-electronic devices. The implementation of SNOM we employ is the most established form in which a probe with a sub-wavelength aperture is scanned in close proximity to the sample surface. We consider the nature of the near-field optical distribution, which decays within the first ca. 100 nm of these semiconductor materials, and address the identification of topographic artefacts in near-field optical images. While the topographic information obtained simultaneously with optical data in any SNOM experiment enables an easy comparison with the higher-resolution tapping-mode atomic force microscopy, the spectroscopic contrast provided by fluorescence SNOM gives an unambiguous chemical identification of the different phases in a conjugated-polymer blend. Both fluorescence and photoconductivity SNOM indicate that intermixing of constituent polymers in a blend, or nanoscale phase separation, is responsible for the high efficiency of devices employing these materials as their active layer. We also demonstrate a scheme for nano-optical lithography with SNOM of conjugated-polymer structures, which has been employed successfully for the fabrication of poly(-phenylene vinylene) nanostructures with 160 nm feature sizes.