Antimicrobial peptides prevent bacterial biofilm formation on the surface of polymethylmethacrylate bone cement

Anti-Staphylococcus aureus effects of natural antimicrobial peptides and the underlying mechanisms

Staphylococcus aureus can cause localized infections such as abscesses and pneumonia, as well as systemic infections such as bacteremia and sepsis. Especially, methicillin-resistant S. aureus often presents multidrug resistance, which becomes a major clinical challenge. One of the most common reasons for methicillin-resistant S. aureus antibiotic resistance is the presence of biofilms. Natural antimicrobial peptides derived from different species have shown effectiveness in combating S. aureus biofilms. In this review, we summarize the inhibitory activity of antimicrobial peptides against S. aureus planktonic cells and biofilms. We also summarize the possible inhibitory mechanisms, involving cell adhesion inhibition, membrane fracture, biofilm disruption and DNA disruption. We believe this can provide the basis for further research against S. aureus biofilm-associated infections.

Preparation of multivesicular liposomes for the loco-regional delivery of Vancomycin hydrochloride using active loading method: drug release and antimicrobial properties

Over the last few years, among controlled-release delivery systems, multivesicular liposomes (MVLs) have attracted attention due to their unique benefits as a loco-regional drug delivery system. Considering the clinical limitations of the current treatment strategies for osteomyelitis, MVLs can be a suitable carrier for the local delivery of effective antibiotics. This study aimed to prepare vancomycin hydrochloride (VAN HL) loaded MVLs using the active loading method which to the best of our knowledge has not been previously reported. Empty MVLS were prepared by the double emulsion (w/o/w) method and VAN HL was loaded into the prepared liposomes by the ammonium gradient method. After full characterization, the release profile of VAN HL from MVLs was assessed at two different pH values (5.5 and 7.4), and compared with the release profile of the free drug and also passively loaded MVLs. In vitro antimicrobial activities were evaluated using the disc diffusion method. Our results demonstrated that the encapsulation efficiency was higher than 90% in the optimum actively loaded MVL. The free VAN HL was released within 6-8 h, while the passively loaded MVLs and the optimum actively loaded MVL formulation released the drug in 6 days and up to 19 days, respectively. The released drug showed effective antibacterial activity against osteomyelitis-causing pathogens. In conclusion, the prepared formulation offered the advantages of sustained-release properties, appropriate particle size as well as being composed of biocompatible materials, and thus could be a promising candidate for the loco-regional delivery of VAN HL and the management of osteomyelitis.

Biomaterial therapeutic strategies for treatment of bacterial lung infections

Bacterial infections of the lung frequently occur as a secondary infection to many respiratory viral infections and conditions, including influenza, COVID-19, chronic obstructive pulmonary disease (COPD), and cystic fibrosis (CF). Currently, clinical standard treats bacterial infections of the lung with antibiotic drugs. However, the use of broad-spectrum antibiotics can disrupt host microbiomes, lead to patient discomfort, and current clinical settings face the constantly increasing threat of drug-resistant bacteria. Biofilms further obstruct effective treatment due to their protective matrix layer, which shields bacteria from both the host immune system and antimicrobial drugs and subsequently promotes drug resistance. Alternative antimicrobial agents, including bacteriophages and antimicrobial peptides, have been utilized to treat drug-resistant bacteria. However, these antimicrobial agents have significant limitations pertaining to their ability to arrive at infection sites without compromised function and ability to persist over an extended period to fully treat infections. Enhanced delivery strategies present great promise in addressing these issues by using micro/nanoparticle carriers that shield antimicrobial agents in transit and result in sustained release, enhancing subsequent therapeutic effect and can even be modulated to be multi-functional to further improve recovery following bacterial infection.

Antimicrobial Peptides in Infectious Diseases and Beyond-A Narrative Review

Despite recent medical research and clinical practice developments, the development of antimicrobial resistance (AMR) significantly limits therapeutics for infectious diseases. Thus, novel treatments for infectious diseases, especially in this era of increasing AMR, are urgently needed. There is ongoing research on non-classical therapies for infectious diseases utilizing alternative antimicrobial mechanisms to fight pathogens, such as bacteriophages or antimicrobial peptides (AMPs). AMPs are evolutionarily conserved molecules naturally produced by several organisms, such as plants, insects, marine organisms, and mammals, aiming to protect the host by fighting pathogenic microorganisms. There is ongoing research regarding developing AMPs for clinical use in infectious diseases. Moreover, AMPs have several other non-medical applications in the food industry, such as preservatives, animal husbandry, plant protection, and aquaculture. This review focuses on AMPs, their origins, biology, structure, mechanisms of action, non-medical applications, and clinical applications in infectious diseases.

Antibacterial peptides-loaded bioactive materials for the treatment of bone infection

Bacterial bone infection in open fractures is an urgent problem to solve in orthopedics. Antimicrobial peptides (AMPs), as a part of innate immune defense, have good biocompatibility. Their antibacterial mechanism and therapeutic application against bacteria have been widely studied. Compared with traditional antibiotics, AMPs do not easily cause bacterial resistance and can be a reliable substitute for antibiotics in the future. Therefore, various physical and chemical strategies have been developed for the combined application of AMPs and bioactive materials to infected sites, which are conducive to maintaining the local stability of AMPs, reducing many complications, and facilitating bone infection resolution. This review explored the molecular structure, function, and direct and indirect antibacterial mechanisms of AMPs, introduced two important AMPs (LL-37 and β-defensins) in bone tissues, and reviewed advanced AMP loading strategies and different bioactive materials. Finally, the latest progress and future development of AMPs-loaded bioactive materials for the promotion of bone infection repair were discussed. This study provided a theoretical basis and application strategy for the treatment of bone infection with AMP-loaded bioactive materials.

Polymer-Antimicrobial Peptide Constructs with Tailored Drug-Release Behavior

Microbial resistance is one of the main problems of modern medicine. Recently, antimicrobial peptides have been recognized as a novel approach to overcome the microbial resistance issue, nevertheless, their low stability, toxicity, and potential immunogenic response in biological systems have limited their clinical application. Herein, we present the design, synthesis, and preliminary biological evaluation of polymer-antibacterial peptide constructs. The antimicrobial GKWMKLLKKILK-NH₂ oligopeptide (PEP) derived from halictine, honey bee venom, was bound to a polymer carrier via various biodegradable spacers employing the pH-sensitive or enzymatically-driven release and reactivation of the PEP's antimicrobial activity. The antibacterial properties of the polymer-PEP constructs were assessed by a determination of the minimum inhibitory concentrations, followed by fluorescence and transmission electron microscopy. The PEP exerted antibacterial activity against both, gram-positive and negative bacteria, via disruption of the bacterial cell wall mechanism. Importantly, PEP partly retained its antibacterial efficacy against Staphylococcus epidermidis, Escherichia coli, and Acinetobacter baumanii even though it was bound to the polymer carrier. Indeed, to observe antibacterial activity similar to the free PEP, the peptide has to be released from the polymer carrier in response to a pH decrease. Enzymatically-driven release and reactivation of the PEP antimicrobial activity were recognized as less effective when compared to the pH-sensitive release of PEP.

S100 Proteins as Novel Therapeutic Targets in Psoriasis and Other Autoimmune Diseases

Psoriasis is one of the most common inflammatory skin diseases affecting about 1-3% of the population. One of the characteristic abnormalities in psoriasis is the excessive production of antimicrobial peptides and proteins, which play an essential role in the pathogenesis of the disease. Antimicrobial peptides and proteins can be expressed differently in normal and diseased skin, reflecting their usefulness as diagnostic biomarkers. Moreover, due to their very important functions in innate immunity, members of host defense peptides and proteins are currently considered to be promising new therapeutic targets for many inflammatory diseases. Koebnerisin (S100A15) belongs to an S100 family of antimicrobial proteins, which constitute the multigenetic group of calcium-binding proteins involved in ion-dependent cellular functions and regulation of immune mechanisms. S100A15 was first discovered to be overexpressed in 'koebnerized' psoriatic skin, indicating its involvement in the disease phenotype and the same promising potential as a new therapeutic target. This review describes the involvement of antimicrobial peptides and proteins in inflammatory diseases' development and therapy. The discussion focuses on S100 proteins, especially koebnerisin, which may be involved in the underlying mechanism of the Köebner phenomenon in psoriasis, as well as other immune-mediated inflammatory diseases described in the last decade.

Antimicrobial peptide in polymethylmethacrylate bone cement as a prophylaxis of infectious complications in orthopedics-an experiment in a murine model

Polymethylmethacrylate (PMMA) bone cement mixed with antibiotics is used in orthopedic surgery to cope with implant-related infections which are typically associated with the formation of bacterial biofilms. Taking into account the growing bacterial resistance to current antibiotics, we examined here the efficacy of a selected antimicrobial peptide (AMP) mixed into the bone cement to inhibit bacterial adhesion and the consequent biofilm formation on its surface. In particular, we followed the formation of bacterial biofilms of methicillin-resistant Staphylococcus aureus (MRSA) on implants made from PMMA bone cement loaded with AMP composed of 12 amino acid residues. This was evaluated by CFU counting of bacteria released by sonication from the biofilms formed on their surfaces after these implants were retrieved from the infected murine femoral canals. The AMP loaded in these model implants prevented adhesion of MRSA and the subsequent formation of MRSA biofilm on the surfaces of more than 80% of these implants, whereas biofilms did form on control implants made from the plain cement. The results of our experiments performed in the murine femoral canal indicate the potential for this murine osteomyelitis model to mimic actual operations in orthopedics.

A stable cyclized antimicrobial peptide derived from LL-37 with host immunomodulatory effects and activity against uropathogens

The increasing antibiotic resistance among uropathogenic bacteria warrants alternative therapeutic strategies. We demonstrate the potential of the synthetic peptide CD4-PP, designed by dimerization and backbone cyclization of the shortest antimicrobial region of human cathelicidin, LL-37. CD4-PP is active against clinical and type strains of common uropathogens Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa at concentrations substantially below cellular cytotoxic levels and induced membrane deformation and leakage in E. coli and P. aeruginosa. Furthermore, CD4-PP treatment prevented the formation of new biofilm and dissolved mature biofilm created by E. coli and P. aeruginosa and targeted curli amyloid in E. coli biofilms. In addition, CD4-PP also induced production of LL-37 by uroepithelial cells and increased the expression of tight junction proteins claudin-14 and occludin. During uroepithelial cell infection, CD4-PP significantly reduced uropathogen survival when treatment was given at the start of infection. Low micromolar of CD4-PP treatment initiated after 2 h was successful with all tested species, except P. aeruginosa where CD4-PP was unable to reduce survival, which could be attributed by early biofilm formation. Finally, we demonstrated that urinary catheter pieces coated with saline fluid supplemented with CD4-PP reduced the attachment of E. coli, giving it a potential clinical application.

Plantaricin LD1 purified from Lactobacillus plantarum LD1 inhibits biofilm formation of Enterococcus faecalis ATCC 29212 in tooth model

Plantaricin LD1 was purified to homogeneity using activity-guided chromatography. Enterococcus faecalis ATCC 29212 was found to be sensitive to plantaricin LD1 showing 13 ± 0.21 mm zone of growth inhibition. The minimum inhibitory concentration (MIC) was found to be 50 µg ml^-1 against Ent. faecalis ATCC 29212. The in vitro biofilm formation by Ent. faecalis ATCC 29212 was observed which was completely inhibited in the presence of bacteriocin. Similarly, biofilm formation was also observed on the teeth surface showing purple colour whereas, treated-teeth were clean indicated no biofilm formation. Further, untreated cells of Ent. faecalis ATCC 29212 were found normal and plantaricin LD1-treated cells were ruptured seen under light microscope suggesting killing of target cells. These findings have proven the initial leads for antimicrobial and anti-biofilm activity of plantaricin LD1 against Ent. faecalis and its possible application for the treatment of endodontic diseases.

Multiple roles of ribosomal antimicrobial peptides in tackling global antimicrobial resistance

In the last century, conventional antibiotics have played a significant role in global healthcare. Antibiotics support the body in controlling bacterial infection and simultaneously increase the tendency of drug resistance. Consequently, there is a severe concern regarding the regression of the antibiotic era. Despite the use of antibiotics, host defence systems are vital in fighting infectious diseases. In fact, the expression of ribosomal antimicrobial peptides (AMPs) has been crucial in the evolution of innate host defences and has been irreplaceable to date. Therefore, this valuable source is considered to have great potential in tackling the antimicrobial resistance (AMR) crisis. Furthermore, the possibility of bacterial resistance to AMPs has been intensively investigated. Here, we summarize all aspects related to the multiple applications of ribosomal AMPs and their derivatives in combating AMR.

Application of Antimicrobial Peptides on Biomedical Implants: Three Ways to Pursue Peptide Coatings

Biofilm formation and inflammations are number one reasons of implant failure and cause a severe number of postoperative complications every year. To functionalize implant surfaces with antibiotic agents provides perspectives to minimize and/or prevent bacterial adhesion and proliferation. In recent years, antimicrobial peptides (AMP) have been evolved as promising alternatives to commonly used antibiotics, and have been seen as potent candidates for antimicrobial surface coatings. This review aims to summarize recent developments in this field and to highlight examples of the most common techniques used for preparing such AMP-based medical devices. We will report on three different ways to pursue peptide coatings, using either binding sequences (primary approach), linker layers (secondary approach), or loading in matrixes which offer a defined release (tertiary approach). All of them will be discussed in the light of current research in this area.

Martins MC, Costa F. Antimicrobial Peptides in the Battle against Orthopedic Implant-Related Infections: A Review

Prevention of orthopedic implant-related infections is a major medical challenge, particularly due to the involvement of biofilm-encased and multidrug-resistant bacteria. Current therapies, based on antibiotic administration, have proven to be insufficient, and infection prevalence may rise due to the dissemination of antibiotic resistance. Antimicrobial peptides (AMPs) have attracted attention as promising substitutes of conventional antibiotics, owing to their broad-spectrum of activity, high efficacy at very low concentrations, and, importantly, low propensity for inducing resistance. The aim of this review is to offer an updated perspective of the development of AMPs-based preventive strategies for orthopedic and dental implant-related infections. In this regard, two major research strategies are herein addressed, namely (i) AMP-releasing systems from titanium-modified surfaces and from bone cements or beads; and (ii) AMP immobilization strategies used to graft AMPs onto titanium or other model surfaces with potential translation as coatings. In overview, releasing strategies have evolved to guarantee higher loadings, prolonged and targeted delivery periods upon infection. In addition, avant-garde self-assembling strategies or polymer brushes allowed higher immobilized peptide surface densities, overcoming bioavailability issues. Future research efforts should focus on the regulatory demands for pre-clinical and clinical validation towards clinical translation.

Antimicrobial Peptides: A Potent Alternative to Antibiotics

Antimicrobial peptides constitute one of the most promising alternatives to antibiotics since they could be used to treat bacterial infections, especially those caused by multidrug-resistant pathogens. Many antimicrobial peptides, with various activity spectra and mechanisms of actions, have been described. This review focuses on their use against ESKAPE bacteria, especially in biofilm treatments, their synergistic activity, and their application as prophylactic agents. Limitations and challenges restricting therapeutic applications are highlighted, and solutions for each challenge are evaluated to analyze whether antimicrobial peptides could replace antibiotics in the near future.

Antimicrobial peptides - Advances in development of therapeutic applications

The severe infection is becoming a significant health problem which threaten the lives of patients and the safety and economy of society. In the way of finding new strategy, antimicrobial peptides (AMPs) - an important part of host defense family, emerged with tremendous potential. Up to date, huge numbers of AMPs has been investigated from both natural and synthetic sources showing not only the ability to kill microbial pathogens but also propose other benefits such as wound healing, anti-tumor, immune modulation. In this review, we describe the involvements of AMPs in biological systems and discuss the opportunity in developing AMPs for clinical applications. In the detail, their properties in antibacterial activity is followed by their application in some infection diseases and cancer. The key discussions are the approaches to improve biological activities of AMPs either by modifying chemical structure or incorporating into delivery systems. The new applications and perspectives for the future of AMPs would open the new era of their development.

Use of non-thermal plasma pre-treatment to enhance antibiotic action against mature Pseudomonas aeruginosa biofilms

Non-thermal plasma (NTP), generated at atmospheric pressure by DC cometary discharge with a metallic grid, and antibiotics (gentamicin-GTM, ceftazidime-CFZ and polymyxin B-PMB), either alone or in combination, were used to eradicate the mature biofilm of Pseudomonas aeruginosa formed on Ti-6Al-4V alloy. Our aim was to find the conditions for NTP pre-treatment capable of enhancing the action of the antibiotics and thus reducing their effective concentrations. The NTP treatment increased the efficacy of relatively low concentrations of antibiotics. Generally, the highest effect was achieved with GTM, which was able to suppress the metabolic activity of pre-formed P. aeruginosa biofilms in the concentration range of 4-9 mg/L by up to 99%. In addition, an apparent decrease of biofilm-covered area was confirmed after combined NTP treatment and GTM action by SYTO®13 staining using fluorescence microscopy. Scanning electron microscopy confirmed a complete eradication of P. aeruginosa ATCC 15442 mature biofilm from Ti-6Al-4V alloy when using 0.25 h NTP treatment and subsequent treatment by 8.5 mg/L GTM. Therefore, NTP may be used as a suitable antibiofilm agent in combination with antibiotics for the treatment of biofilm-associated infections caused by this pathogen.

Prevention of Prosthetic Joint Infection: From Traditional Approaches towards Quality Improvement and Data Mining

A projected increased use of total joint arthroplasties will naturally result in a related increase in the number of prosthetic joint infections (PJIs). Suppression of the local peri-implant immune response counters efforts to eradicate bacteria, allowing the formation of biofilms and compromising preventive measures taken in the operating room. For these reasons, the prevention of PJI should focus concurrently on the following targets: (i) identifying at-risk patients; (ii) reducing “bacterial load” perioperatively; (iii) creating an antibacterial/antibiofilm environment at the site of surgery; and (iv) stimulating the local immune response. Despite considerable recent progress made in experimental and clinical research, a large discrepancy persists between proposed and clinically implemented preventative strategies. The ultimate anti-infective strategy lies in an optimal combination of all preventative approaches into a single “clinical pack”, applied rigorously in all settings involving prosthetic joint implantation. In addition, “anti-infective” implants might be a choice in patients who have an increased risk for PJI. However, further progress in the prevention of PJI is not imaginable without a close commitment to using quality improvement tools in combination with continual data mining, reflecting the efficacy of the preventative strategy in a particular clinical setting.

Combined effect of lasioglossin LL-III derivative with azoles against Candida albicans virulence factors: biofilm formation, phospholipases, proteases and hemolytic activity

Candida albicans has several virulence factors at its disposal, including yeast–hyphal transition associated with biofilm formation, phospholipases, proteases and hemolytic activity, all of which contribute to its pathogenesis. We used synthetic derivative LL-III/43 of antimicrobial peptide lasioglossin LL-III to enhance effect of azoles on attenuation of C. albicans virulence factors. LL-III/43 was able to inhibit initial adhesion or biofilm formation of C. albicans strains at 50 µM. Azoles, however, were ineffective at this concentration. Using fluorescently labeled LL-III/43, we observed that peptide covered C. albicans cells, partially penetrated through their membranes and then accumulated inside cells. LL-III/43 (25 µM) in combination with clotrimazole prevented biofilm formation already at 3.1 µM clotrimazole. Neither LL-III/43 nor azoles were able to significantly inhibit phospholipases, proteases, or hemolytic activity of C. albicans. LL-III/43 (25 µM) and clotrimazole (50 µM) in combination decreased production of these virulence factors, and it completely attenuated its hemolytic activity. Scanning electron microscopy showed that LL-III/43 (50 µM) prevented C. albicans biofilm formation on Ti-6Al-4 V alloy used in orthopedic surgeries and combination of LL-III/43 (25 µM) with clotrimazole (3.1 µM) prevented biofilm formation on urinary catheters. Therefore, mixture of LL-III/43 and clotrimazole is suitable candidate for future pharmaceutical research.

Suppressing Antibacterial Resistance: Chemical Binding of Monolayer Quaternary Ammonium Salts to Polymethyl Methacrylate in an Aqueous Solution and its Clinical Efficacy

Antibacterial resistance (ABR) poses an enormous threat to human health. ABR mainly develops due to bacteria being constantly exposed to diluted levels of disinfectants. Here, we propose a method for suppressing ABR through the chemical binding of disinfectants to polymethyl methacrylate (PMMA) device surfaces in solutions of 5%, 10%, and 20% disinfectant concentrations. PMMA discs were fabricated from a commercial orthodontic acrylic resin system (Ortho-Jet) and quaternary ammonium salts (QAS), 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (42% in methanol), were used as the disinfectant. The PMMA surfaces were activated in 3 M sulfuric acid at 80 °C for 5 h for the esterification of hydrolyzed QAS to PMMA. Fourier transform infrared difference spectra confirmed that the carboxy-terminated PMMA was chemically bound to the QAS. In vitro cell viability tests using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assays revealed that 5%QAS-c-PMMA was more biocompatible than 10%QAS-c-PMMA and 20%QAS-c-PMMA. The results of antibacterial tests and clinical trials demonstrated the excellent antibacterial power of 5%QAS-c-PMMA. This method is the first solution-based approach to successfully avoid disinfectant leakage and subsequent ABR, as revealed by mass spectrometry studies of the solution obtained by agitating the disinfectant-bound PMMA for 28 days.