Potential, core-level, and d band shifts at transition-metal surfaces

Copper regulation of PtRhRuCu nanozyme targeted boosting peroxidase-like activity for ultrasensitive smartphone-assisted colorimetric sensing of glucose

Point-of-care testing (POCT) is promising for biodetection in home healthcare due to advantages of simplicity, rapidity, low cost, portability, high sensitivity and accuracy, and object-oriented POCT platform can be developed by nanozyme-based biosensing. However, designing high-performance nanozymes with targeted regulated catalytic activity remains challenging. Herein, advanced PtRhRuCu quaternary alloy nanozymes (QANs) were rationally designed and successfully synthesized. Cu atoms induced mechanisms of hydrogen peroxide (H2O2) activation and d-band center regulation, achieving high enhancement of peroxide (POD)-like activity and inhibition of oxidase (OXD)-like activity. Inspired by this, a smartphone-assisted colorimetric platform integrated with test strips was established for glucose detection of soft drinks, with a detection limit of 0.021 mM and a recovery rate of 97.87 to 103.36 %. This work not only provides a novel path for tuning specific enzyme-like activities of metal nanozymes, but also shows the potential feasibility for rational design of POCT sensors in actual samples.

Molten salt synthesis of carbon-supported Pt–rare earth metal nanoalloy catalysts for oxygen reduction reaction

The synthesis mechanism of Pt–RE nanoalloy particles prepared by one-step molten salt synthesis as an advanced ORR catalyst is proposed.

Pt distribution-controlled Ni–Pt nanocrystals via an alcohol reduction technique for the oxygen reduction reaction

The catalytic performance and durability of Ni–Pt alloy nanoparticles synthesized using an alcohol reduction technique were enhanced by controlling the metallic Pt distribution.

Cyanogroup functionalized sub-2 nm ultrafine Pt nanonetworks reinforce electrocatalytic hydrogen evolution in a broad pH range

Cyanogroup functionalized Pt ultrafine nanonetworks are synthesized via a facile one-pot oil bath heating method, and exhibit excellent HER performance in a broad pH range.

Implanting Atomic Dispersed Ru in PtNi Colloidal Nanocrystal Clusters for Efficient Catalytic Performance in Electro-oxidation of Liquid Fuels

Although PtRu alloy nanocatalysts have been certified to possess excellent electrocatalytic performance and CO-poisoning tolerance toward formic acid and methanol electro-oxidation, the unaffordable usages of ruthenium (Ru) and platinum (Pt) have greatly limited their widespread adoption. Here, a facile one-pot method is reported for implanting atomic dispersed Ru in PtNi colloidal nanocrystal clusters with different Ru/Pt/Ni molar ratios, greatly reducing the dosages of Pt and Ru, and further improving the catalytic performances for the electro-oxidation of formic acid and methanol. Through simple control of the amount of Ni(acac)₂ precursor, trimetallic Ru_0.3 Pt_70.5 Ni_29.2 , Ru_0.6 Pt_55.9 Ni_43.5 , Ru_0.2 Pt_77.3 Ni_22.5 , and Ru_0.9 Pt_27.3 Ni_71.8 colloidal nanocrystal clusters (CNCs) are obtained. In particular, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs exhibit excellent specific activities for formic acid and methanol electro-oxidation, that is, 14.2 and 15.3 times higher, respectively, than those of the Pt/C catalyst. Moreover, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs also possess better anti-CO-poisoning properties and diffusion ability than the other RuPtNi CNCs. The excellent formic acid and methanol electro-oxidation activities of RuPtNi CNCs are ascribed to the optimal ligand effects derived from the Pt, Ni, and atomic dispersed Ru atoms, which can improve the OH adsorption ability and further the anti-CO-poisoning capability. This research opens a new door for increasing the electro-oxidation properties of liquid fuels by using lower dosages of noble metals in Pt-based catalysts.

Intermetallic: A Pseudoelement for Catalysis

A clear correlation between electronic structure and CO₂ selectivity for steam reforming of methanol (SRM) was obtained with PdZn, PtZn, NiZn, and PdCd intermetallics on the basis of experiments and calculations. In order to rule out the effects of oxide supports, the intermetallic powders were simply prepared by alloying in an arc furnace followed by crushing in a mortar. PdZn and PdCd exhibit valence electronic densities of states similar to that of Cu and significant chemical shifts (larger than 1 eV) of Pd 3d states with respect to pure Pd, as verified by high-resolution hard X-ray photoelectron spectroscopy (HXPS) measurements and density functional theory (DFT) calculations. Consequently, they show the similar high selectivity of CO₂ for the SRM reaction. However, this is not the case for PtZn and NiZn because of the slight differences in their valence electronic structures from that of PdZn. The interval between the Fermi level and the top of the d band is closely related to the selectivity of CO₂ for the SRM: the larger the interval is, the higher is the selectivity of CO₂. According to DFT calculations for bulk PdZn performed by Chen et al. ( Phys. Rev. B 2003 , 68 , 075417 ), the (111) and (100) surfaces exposing Zn and Pd in an equimolar ratio are more stable than the (001) or (110) surfaces terminated by alternative Zn or Pd layers. First-principles slab calculations for PdZn, PtZn, and NiZn show that bond breaking on the surface leads to a reduction in the d bandwidth but that the d band for stable (111) or (100) surfaces remains essentially unchanged from that of the bulk. It is intriguing that PdZn and PdCd do not contain Cu but show similar valence electronic structure and catalytic selectivity, and hence, a concept is proposed where PdZn and PdCd are regarded as pseudoelements of Cu. The basis of this concept is like electronic structure, like catalysis, which has been demonstrated by experiments and calculations. This is a logical way to enable us to look for new catalysts in which precious metals are partially or completely replaced by base metals. We do not expect that this concept can be applied to all catalytic reactions, but this approach is one of most promising ways to derive a better understanding of the origin of catalytic mechanisms and eventually allow us to design useful catalysts intentionally in the future. This Account reviews the authors' published works on this topic.

A General Strategy Assisted with Dual Reductants and Dual Protecting Agents for Preparing Pt-Based Alloys with High-Index Facets and Excellent Electrocatalytic Performance

Synthesizing noble metallic nanoparticles (NPs) enclosed by high-index facets (HIFs) is challenged as it involves the tuning of growth kinetics, the selective adsorption of certain chemical species, and the epitaxial growth from HIF enclosed seeds. Herein, a simple and general strategy is reported by using dual reduction agents and dual capping agents to prepare Pt-based alloy NPs with HIFs, in which both glycine and poly(vinylpyrrolidone) serve as the reductants and capping agents. Due to the facilely tunable growth/nucleation rates and protecting abilities of the reductants and capping agents, Pt concave nanocube (CNC), binary Pt-Ni CNC, ternary Pt-Mn-Cu CNC, and Pt-Mn-Cu ramiform polyhedron alloy NPs terminated by HIFs as well as other NPs with well-defined morphologies such as Pt-Mn-Cu nanocube and Pt-Mn-Cu nanoflower are obtained with this approach. Owing to the high density of low-coordinated Pt sites (HIF structure) and the unique electronic effect of Pt-Mn-Cu ternary alloys, the as-prepared Pt-Mn-Cu NPs show enhanced catalytic activity toward methanol and formic acid electro-oxidation reactions with excellent stability. This work provides a promising methodology for designing and fabricating Pt-based alloy NPs as efficient fuel cell catalyst.

Size Effects in Electronic and Catalytic Properties of Unsupported Palladium Nanoparticles in Electrooxidation of Formic Acid

We report a combined X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and chronoamperometry (CA) study of formic acid electrooxidation on unsupported palladium nanoparticle catalysts in the particle size range from 9 to 40 nm. The CV and CA measurements show that the most active catalyst is made of the smallest (9 and 11 nm) Pd nanoparticles. Besides the high reactivity, XPS data show that such nanoparticles display the highest core-level binding energy (BE) shift and the highest valence band (VB) center downshift with respect to the Fermi level. We believe therefore that we found a correlation between formic acid oxidation current and BE and VB center shifts, which, in turn, can directly be related to the electronic structure of palladium nanoparticles of different particle sizes. Clearly, such a trend using unsupported catalysts has never been reported. According to the density functional theory of heterogeneous catalysis, and mechanistic considerations, the observed shifts are caused by a weakening of the bond strength of the COOH intermediate adsorption on the catalyst surface. This, in turn, results in the increase in the formic acid oxidation rate to CO2 (and in the associated oxidation current). Overall, our measurements demonstrate the particle size effect on the electronic properties of palladium that yields different catalytic activity in the HCOOH oxidation reaction. Our work highlights the significance of the core-level binding energy and center of the d-band shifts in electrocatalysis and underlines the value of the theory that connects the center of the d-band shifts to catalytic reactivity.