Wetting boundaries for a ternary high-density-ratio lattice Boltzmann method

Wetting Effect Induced Depletion and Adsorption Layers: Diffuse Interface Perspective

When a multi-component fluid contacts arigid solid substrate, the van der Waals interaction between fluids and substrate induces a depletion/adsorption layer depending on the intrinsic wettability of the system. In this study, we investigate the depletion/adsorption behaviors of A-B fluid system. We derive analytical expressions for the equilibrium layer thickness and the equilibrium composition distribution near the solid wall, based on the theories of de Gennes and Cahn. Our derivation is verified through phase-field simulations, wherein the substrate wettability, A-B interfacial tension, and temperature are systematically varied. Our findings underscore two pivotal mechanisms governing the equilibrium layer thickness. With an increase in the wall free energy, the substrate wettability dominates the layer formation, aligning with de Gennes' theory. When the interfacial tension increases, or temperature rises, the layer formation is determined by the A-B interactions, obeying Cahn's theory. Additionally, we extend our study to non-equilibrium systems where the initial composition deviates from the binodal line. Notably, macroscopic depletion/adsorption layers form on the substrate, which are significantly thicker than the equilibrium microscopic layers. This macroscopic layer formation is attributed to the interplay of phase separation and Ostwald ripening. We anticipate that the present finding could deepen our knowledge on the depletion/adsorption behaviors of immiscible fluids.

Dynamics of spreading of an asymmetrically placed droplet near a fluid-fluid interface

Two-dimensional numerical simulations are carried out to study the spreading dynamics of a droplet placed in the vicinity of a fluid-fluid interface. Simulations are performed using the hybrid lattice-Boltzmann technique and the diffuse-interface model by considering three immiscible fluids of the same density and viscosity. In contrast to the well-studied spreading of drops placed symmetrically across fluid-fluid interfaces, this work considers the simultaneous migration, spreading and eventual adsorption of an asymmetrically placed drop. These processes, which are solely driven by interfacial forces, are characterised by monitoring the temporal evolution of geometric parameters, such as the centre of mass, radius and height of the drop, the surface energy of the three interfaces and the associated flow fields inside and outside the droplet. The rate of spreading and rate of adsorption are also calculated to determine the dominant processes that drive the dynamics of the system.

Wetting Effect on Patterned Substrates

A droplet deposited on a solid substrate leads to the wetting phenomenon. A natural observation is the lotus effect, known for its superhydrophobicity. This special feature is engendered by the structured microstructure of the lotus leaf, namely, surface heterogeneity, as explained by the quintessential Cassie-Wenzel theory (CWT). In this work, recent designs of functional substrates are overviewed based on the CWT via manipulating the contact area between the liquid and the solid substrate as well as the intrinsic Young's contact angle. Moreover, the limitation of the CWT is discussed. When the droplet size is comparable to the surface heterogeneity, anisotropic wetting morphology often appears, which is beyond the scope of the Cassie-Wenzel work. In this case, several recent studies addressing the anisotropic wetting effect on chemically and mechanically patterned substrates are elucidated. Surface designs for anisotropic wetting morphologies are summarized with respect to the shape and the arrangement of the surface heterogeneity, the droplet volume, the deposition position of the droplet, as well as the mean curvature of the surface heterogeneity. A thermodynamic interpretation for the wetting effect and the corresponding open questions are presented at the end.

Lattice Boltzmann simulation of three-phase flows with moving contact lines on curved surfaces

A numerical method for simulating three-phase flows with moving contact lines on arbitrarily complex surfaces is developed in the framework of the lattice Boltzmann method. In this method, the immiscible three-phase flow is modeled through a multiple-relaxation-time color-gradient model, which not only allows for a full range of interfacial tensions but also produces stable outcomes for a wide range of viscosity ratios. A characteristic line model is introduced to implement the wetting boundary condition, which is not only easy to implement but is also able to handle arbitrarily complex boundaries with prescribed contact angles. The developed method is first validated by the simulation of a Janus droplet resting on a flat surface, a perfect Janus droplet deposited on a cylinder, and the capillary intrusion of ternary fluids for various viscosity ratios. It is then used to study a compound droplet subject to a uniform incoming flow passing through a multipillar structure, where three different values of surface wettability are considered. The simulated results show that the surface wettability has significant impact on the droplet dynamic behavior and final fluid distribution.

Lattice Boltzmann model for ternary fluids with solid particles

On the basis of phase-field theory, we develop a lattice Boltzmann model for ternary fluids containing solid. We develop a modified bounce-back method to describe the interactions between the solid and N-phase (N≥2) fluids. We derive a wetting boundary condition for three-phase flows from the point of mass conservation and propose a scheme for implementing the wetting condition on curved boundaries. We develop a diffuse interface method to compute the capillary force acting on the moving solid objects at the ternary fluids-sold contact lines. In addition, this model can deal with problems involving high density and viscosity contrasts. The proposed method is examined through several test cases. We test the modified bounce-back scheme, wetting boundary condition, and capillary force model in three different cases, and the numerical results agree well with the analytical solutions. Finally, we apply the model to two three-dimensional problems to assess its numerical accuracy and stability.